Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Review Article: Case studies in future trends of computational and experimental nanomechanics

With rapidly increasing numbers of studies of new and exotic material uses for perovskites and quasicrystals, these demand newer instrumentation and simulation developments to resolve the revealed complexities. One such set of observational mechanics at the nanoscale is presented here for somewhat simpler material systems. The expectation is that these approaches will assist those materials scientists and physicists needing to verify atomistic potentials appropriate to the nanomechanical understanding of increasingly complex solids. The five following segments from nine University, National and Industrial Laboratories both review and forecast where some of the important approaches will allow a confirming of how in situ mechanics and nanometric visualization might unravel complex phenomena. These address two-dimensional structures, temporal models for the nanoscale, atomistic and multiscale friction fundamentals, nanoparticle surfaces and interfaces and nanomechanical fracture measurements, all coupled to in situ observational techniques. Rapid future advances in the applicability of such materials science solutions appear guaranteed.

36 MATERIALS SCIENCE↗

Prediction of defect properties in concentrated solid solutions using a Langmuir-like model

The alleged existence of sluggish diffusion in high-entropy alloys has drawn controversy. In high-entropy alloys and, in general, in all solids, transport properties are controlled by point defect concentration, which must be known before performing atomistic simulations to compute transport coefficients. In this work, we present a general Langmuir-like model for defect concentration in an arbitrarily complex solid solution and apply this model to generate expressions for concentrations of vacancies and small interstitial atoms. We then calculate the vacancy concentration as a function of temperature in the equiatomic CoNiCrFeMn and FeAl alloys with modified embedded-atom-method potentials for various chemical orderings, showing there is no clear correlation between vacancy thermodynamics and chemical ordering in the CoNiCrFeMn alloy, but clear systematic patterns for FeAl. We believe this is due to the high stability of disordered, random, and ordered intermetallic phases, respectively, in the CoNiCrFeMn and FeAl systems. Finally, this work provides future avenues to the prediction of thermal interstitials and vacancies in solid solutions, which is necessary for models of nonequilibrium behavior of solid solutions.

composition↗

Directing the phase behavior of polyelectrolyte complexes using chiral patterned peptides

Polyelectrolyte complexes (PECs) have a broad range of promising applications as soft materials due to their self-assembly and diversity of structure and chemical composition. Peptide polymer PECs are highly biocompatible and biodegradable, making them particularly useful for encapsulation of food additives and flavors, micellar drug delivery, medical and underwater adhesives, fetal membrane patches, and scaffolds for cell growth in tissue engineering. While parameters affecting PEC formation and stability in regards to charge effects are well researched, little is known about the effects of van der Waals interactions, hydrogen bonding, and secondary structure in these materials. Peptide chirality provides a unique opportunity to manipulate PEC phase to modulate the amount of solid-like (precipitate) or liquid-like (coacervate) character by influencing hydrogen bonding interactions among peptide chains. In previous work, we showed that chiral peptides form solid complexes, while complexes with even one racemic peptide were fluid. This raised the interesting question of how long a homochiral sequence must be to result in solid phase formation. In this work, we designed chiral patterned peptides of polyglutamic acid and polylysine ranging from 50 to 90% L-chiral residues with increasing numbers of sequential L-chiral residues before a chirality change. These polymers were mixed together to form PECs. We observed that 8 or more sequential L-chiral residues are necessary to achieve both the appearance of a precipitate phase and sustained beta-sheets in the complex, as determined by optical imaging and FTIR Spectroscopy. Less homochiral content results in formation of a coacervate phase. Thus, we show that chiral sequence can be used to control the phase transition of PECs. Understanding how to manipulate PEC phase using chiral sequence as presented here may enable tuning of the material properties to achieve the desired mechanical strength for coatings and polymer brushes, or the most effective molecular release kinetics for drug delivery applications, for example.

Pacalin, Naomi M.↗

Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes

Oxygen, one of the most abundant elements on Earth, often forms an undesired interstitial impurity or ceramic phase (such as an oxide particle) in metallic materials. Even when it adds strength, oxygen doping renders metals brittle. Here, in this study, we show that oxygen can take the form of ordered oxygen complexes, a state in between oxide particles and frequently occurring random interstitials. Unlike traditional interstitial strengthening, such ordered interstitial complexes lead to unprecedented enhancement in both strength and ductility in compositionally complex solid solutions, the so-called high-entropy alloys (HEAs). The tensile strength is enhanced (by 48.5 ± 1.8 per cent) and ductility is substantially improved (by 95.2 ± 8.1 per cent) when doping a model TiZrHfNb HEA with 2.0 atomic per cent oxygen, thus breaking the long-standing strength–ductility trade-off. The oxygen complexes are ordered nanoscale regions within the HEA characterized by (O, Zr, Ti)-rich atomic complexes whose formation is promoted by the existence of chemical short-range ordering among some of the substitutional matrix elements in the HEAs. Carbon has been reported to improve strength and ductility simultaneously in face-centred cubic HEAs, by lowering the stacking fault energy and increasing the lattice friction stress. By contrast, the ordered interstitial complexes described here change the dislocation shear mode from planar slip to wavy slip, and promote double cross-slip and thus dislocation multiplication through the formation of Frank–Read sources (a mechanism explaining the generation of multiple dislocations) during deformation. This ordered interstitial complex-mediated strain-hardening mechanism should be particularly useful in Ti-, Zr- and Hf-containing alloys, in which interstitial elements are highly undesirable owing to their embrittlement effects, and in alloys where tuning the stacking fault energy and exploiting athermal transformations do not lead to property enhancement. These results provide insight into the role of interstitial solid solutions and associated ordering strengthening mechanisms in metallic materials.

Lei, Zhifeng↗

In situ microstructural evolution in face-centered and body-centered cubic complex concentrated solid-solution alloys under heavy ion irradiation

This study characterizes the microstructural evolution of single-phase complex concentrated solid-solution alloy (CSA) compositions under heavy ion irradiation with the goal of evaluating mechanisms for CSA radiation tolerance in advanced fission systems. Three such alloys, Cr 18 Fe 27 Mn 27 Ni 28 , Cr 15 Fe 35 Mn 15 Ni 35 , and equimolar NbTaTiV, along with reference materials (pure Ni and E90 for the Cr-FeMnNi family and pure V for NbTaTiV) were irradiated at 50 K and 773 K with 1 MeV Kr ++ ions to various levels of displacements per atom (dpa) using in-situ transmission electron microscopy. Cryogenic irradiation resulted in small defect clusters and faulted dislocation loops as large as 12 nm in face-centered cubic (FCC) CSAs. With thermal diffusion suppressed at cryogenic temperatures, defect densities were lower in all CSAs than in their less compositionally complex reference materials indicating that point defect production is reduced during the displacement cascade stage. High temperature irradiation of the two FCC CSA resulted in the formation of interstitial dislocation loops which by 2 dpa grew to an average size of 27 nm in Cr 18 Fe 27 Mn 27 Ni 28 and 10 nm in Cr 15 Fe 35 Mn 15 Ni 35 . This difference in loop growth kinetics was attributed to the difference in Mn-content due to its effect on the nucleation rate by increasing vacancy mobility or reducing the stacking-fault energy.

36 MATERIALS SCIENCE↗

Broadband cross-polarization-based heteronuclear dipolar recoupling for structural and dynamic NMR studies of rigid and soft solids

Dipolar recoupling is an essential part of current solid-state NMR methodology for probing atomic-resolution structure and dynamics in solids and soft matter. Recently described magic-echo amplitude- and phase-modulated cross-polarization heteronuclear recoupling strategy aims at efficient and robust recoupling in the entire range of coupling constants both in rigid and highly dynamic molecules. In the present study, the properties of this recoupling technique are investigated by theoretical analysis, spin-dynamics simulation, and experimentally. The resonance conditions and the efficiency of suppressing the rf field errors are examined and compared to those for other recoupling sequences based on similar principles. The experimental data obtained in a variety of rigid and soft solids illustrate the scope of the method and corroborate the results of analytical and numerical calculations. The technique benefits from the dipolar resolution over a wider range of coupling constants compared to that in other state-of-the-art methods and thus is advantageous in studies of complex solids with a broad range of dynamic processes and molecular mobility degrees.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lithiation bridged molecular conducting magnets

Combining ferromagnetism and metallic conductivity has been extensively studied in contemporary materials science. However, building such multifunctionalities in molecular chemistry is particularly challenging, on which two collective properties are long considered as mutually exclusive. Here, we report molecular conducting magnet consisting of two-dimensional graphene and molecular planar magnetic networks bridged by electrochemical lithiation, exhibiting the co-existence of distinct magnetism and conductivity and magneto-electric coupling effects. Here, the room temperature magnetoresistance and magnetoelectric coupling coefficient of such complex solid reach 10.7% and 1.77 V/Oe cm, respectively, which can be further tailored by modulating the interaction between graphene and molecular magnetic network. In addition, the graphene passivation simultaneously introduces environmental stability of molecular mag-nets. The electrochemical lithiation offers a pathway towards coupling magnetism and conductivity in molecular complexes.

2D organic complexes↗

New Solids in As-O-Mo, As(P)-O-Mo(W) and As(P)-O-Nb(W) Systems That Exhibit Nonlinear Optical Properties

Interactions between well-mixed fine powders of As 2 O 3 , P 2 O 5 , MoO 3 , WO 3 and Nb 2 O 5 at different stoichiometry in quartz ampoules under vacuum at ~1000 °C in the presence of metallic molybdenum (or niobium), over several weeks, led to shiny dichroic crystalline materials being formed in cooler parts of the reaction vessel. An addition of small quantities of metals-Mo or Nb-was made with the aim of partially reducing their highly oxidized Mo(VI), W(VI) or Nb(V) species to corresponding Mo(V), W(V) and Nb(IV) centers, in order to form mixed valence solids. Sublimed crystals of four new compounds were investigated using a variety of techniques, with prime emphasis on the X-ray analysis, followed by spectroscopy (diffusion reflectance, IR, Raman and EPR), second harmonic generation (SHG), thermal analysis under N 2 and air atmosphere, and single crystals electrical conductivity studies. The results evidenced the formation of new complex solids of previously unknown compositions and structures. Three out of four compounds crystallized in non-centrosymmetric space groups and represent layered 2D polymeric puckered structures that being stacked on each other form 3D lattices. All new solids exhibit strong second-harmonic-generation (SHG effect; based on YAG 1064 nm tests with detection of 532 nm photons), and a rare photosalient effect when crystals physically move in the laser beam. Single crystals’ electrical conductivity of the four new synthesized compounds was measured, and the results showed their semiconductor behavior. Values of band gaps of these new solids were determined using diffusion reflectance spectroscopy in the visible region. Aspects of new solids’ practical usefulness are discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Modifying Ionogel Solid-Electrolytes for Complex Electrochemical Systems

The solution processability of ionogel solid electrolytes has recently garnered attention in the Li-ion battery community as a means to address the interface and fabrication issues commonly associated with most solid electrolytes. However, the trapped ionic liquid (ILE) component has hindered the electrochemical performance. In this report we present a process to tune the properties by replacing the ILE in a silica-based ionogel after fabrication with a liquid component befitting the desired application. Electrochemical cycling under various conditions showcases gels containing different liquid components incorporated into LiFePO4 (LFP)/gel/Li cells: high power (455 W kg –1 at a 1 C discharge) systems using carbonates, low temperatures (-40 °C) using ethers, or high temperatures (100 °C) using ionic liquids. Fabrication of additive-manufactured cells utilizing the exchanged carbonate-based system is demonstrated in a planar LFP/Li 4 Ti 5 O 12 (LTO) system, where a marked improvement over an ionogel is found in terms of rate capability, capacity, and cycle stability (118 vs 41 mA h g –1 at C/4). This process represents a promising route to create a separator-less cell, potentially in complex architectures, where the electrolyte properties can be facilely tuned to meet the required conditions for a wide range of battery chemistries while maintaining a uniform electrolyte access throughout cast electrodes.

25 ENERGY STORAGE↗

Electronic and Molecular Structures of trans-Dioxotechnetium(V) Polypyridyl Complexes in the Solid State

The structures of novel Tc(V) complexes trans-[TcO2(py)4]Cl.2H2O (1a), trans-[TcO2(pic)4]Cl.2H2O (2a) and trans-[TcO2(pic)4]BPh4 (2b) were determined by X-ray crystallography, and their spectroscopic characteristics were investigated by emission spectroscopy and atomic scale calculations. The cations adopt a tetragonally distorted octahedral geometry, with a trans orientation of the apical oxo groups. trans-[TcO2(pic)4]BPh4 has an inversion center located on technetium; however, for trans-[TcO2(py)4]Cl.2H2O and trans-[TcO2(pic)4]Cl.2H2O, a strong H-bond formed by only one of the oxo substituents introduces an asymmetry in the structure, resulting in inequivalent trans Tc-N and Tc=O distances. Upon 415 nm excitation at room temperature, the complexes exhibited broad, structureless luminescences with emission maxima at approximately 710 nm (1a) and 750 nm (2a, 2b). Like the Re(V) analogs, the Tc(V) complexes luminesce from a 3Eg excited state. Upon cooling the samples from 278 K to 8 K, distinct vibronic features appear in the spectra of the complexes along with increases in emission intensities. The low temperature emission spectra display the characteristic progressions of the symmetric O=Tc=O and the Tc-L-stretching modes. Spectra calculated using a time-dependent theoretical approach are in good agreement with the experimental spectra. The discovery of luminescence from the trans-dioxotechnetium(V) complexes provides the first opportunity to directly compare fundamental luminescence properties of second- and third-row d2 metal-oxo congeners.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ta-Nb-Mo-W refractory high-entropy alloys: Anomalous ordering behavior and its intriguing electronic origin

From electronic-structure-based thermodynamic linear response, we establish chemical ordering behavior in complex solid solutions versus how Gibbs' space is traversed—applying it on prototype refractory A2 Ta-Nb-Mo-W high-entropy alloys. Near ideal stoichiometry, this alloy has anomalous, intricate chemical ordering tendencies, with long-ranged chemical interactions that produce competing short-range order (SRO) with a crossover to spinodal segregation. This atypical SRO arises from canonical band behavior that, with alloying, creates features near the Fermi surface (well defined even with disorder) that change to simple commensurate SRO with (un)filling of these states. In conclusion, our results reveal how complexity and competing electronic effects control ordering in these alloys.

36 MATERIALS SCIENCE↗

Predicting Oxygen Off-Stoichiometry and Hydrogen Incorporation in Complex Perovskite Oxides

Chemically and structurally complex solid compounds, including those with significant off-stoichiometry, are rapidly extending new material functionality across a variety of applications. Accelerated development of these compounds requires accurate predictions of material defect properties including effective defect formation energies and equilibrium defect concentrations. Traditional first-principles approaches typically examine dilute defect concentrations and relatively ordered atomic structures to identify the lowest energy defect sites. These approaches are rarely suitable for describing the disorder present in these systems and its influence on defect formation, which can lead to unphysically large predictions for defect concentrations. Here, we demonstrate a new method to accurately predict the temperature and pressure dependence of oxygen vacancy concentrations and proton interstitial concentrations in complex oxides. This method extends standard dilute defect calculations to incorporate atomic and magnetic disorder, employs the ensemble descriptions of defect sites resulting in improved predictions of defect formation energies, and accounts for effects beyond the dilute defect limit. To demonstrate our method, we show that the predicted defect concentrations in perovskites used as ceramic fuel cell cathodes, including Ba0.5Sr0.5Fe0.8Zn0.2O3-d, Ba0.5Sr0.5Co0.8Fe0.2O3-d, and BaCo1-x-y-zFexZryYzO3-d, are in good agreement with experimental values, thereby opening the door for predictive design of complex oxides by these applications.

DFT↗

Vibrational Entropy of Crystalline Solids from Covariance of Atomic Displacements

The vibrational entropy of a solid at finite temperature is investigated from the perspective of information theory. Ab initio molecular dynamics (AIMD) simulations generate ensembles of atomic configurations at finite temperature from which we obtain the N-body distribution of atomic displacements, ρN. We calculate the information-theoretic entropy from the expectation value of lnρN. At a first level of approximation, treating individual atomic displacements independently, our method may be applied using Debye–Waller B-factors, allowing diffraction experiments to obtain an upper bound on the thermodynamic entropy. At the next level of approximation we correct the overestimation through inclusion of displacement covariances. We apply this approach to elemental body-centered cubic sodium and face-centered cubic aluminum, showing good agreement with experimental values above the Debye temperatures of the metals. Below the Debye temperatures, we extract an effective vibrational density of states from eigenvalues of the covariance matrix, and then evaluate the entropy quantum mechanically, again yielding good agreement with experiment down to low temperatures. Our method readily generalizes to complex solids, as we demonstrate for a high entropy alloy. Further, our method applies in cases where the quasiharmonic approximation fails, as we demonstrate by calculating the HCP/BCC transition in Ti.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffused morphotropic phase boundary in relaxor-PbTiO 3 crystals: High piezoelectricity with improved thermal stability

Solid solution ferroelectrics are the most widely used piezoelectric material for numerous electromechanical applications, including sensors, actuators, and transducers. A milestone in ferroelectric research is the discovery of the morphotropic phase boundary that was first reported in Pb(Zr x Ti 1–x )O 3 , which has been extensively solicited to improve the performance of various solid solution ferroelectrics, including those having the highest piezoelectricity known today. However, due to the inherent correlation between phase transition and thermodynamic imbalance, the efforts of building the phase boundary encounter the challenge that high performance materials are generally accompanied by property instability. In this paper, we report a comprehensive study on the crystalline symmetry and polar nano-regions in relaxor-PbTiO 3 crystals by synchrotron measurements and property characterizations. In contrast to the common belief that the morphotropic phase boundary is a narrow composition region, the morphotropic phase boundary in ternary Pb(In 1/2 Nb 1/2 )O 3 -Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 is demonstrated as an extensive region covering at least 9% of the PbTiO 3 content. Such a diffused morphotropic phase boundary is associated with the intensive interaction of polar nano-regions, leading to high piezoelectricity (>1500 pC/N) with greatly improved thermal stability, where the piezoelectric variation is ~90% over the temperature range of 273–373 K, which is about a factor of 3 lower compared to its binary counterpart Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 . This work sheds light on the fundamental understanding of nanoscale inhomogeneity and macroscopic symmetry in relaxor-PbTiO 3 , and successfully interlinks the structure and properties in complex solid solutions. The existence of a diffused morphotropic phase boundary is also expected to benefit other ferroic systems beyond ferroelectrics, such as ferromagnetic and multiferroic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Key Electronic States in Layered Mixed Chalcogenides With a d 0 Transition Metal as Li-Ion Cathodes

Lithium-rich transition metal chalcogenides are witnessing a revival as candidates for Li-ion cathode materials, spurred by the boost in their capacities from transcending conventional redox processes based on cationic states and tapping into additional chalcogenide states. A particularly striking case is Li 2 TiS 3-y Se y , which features a d 0 metal. While the end members are expectedly inactive, substantial capacities are measured when both Se and S are present. Using X-ray absorption spectroscopy, it is shown that the electronic structure of Li 2 TiS 3-y Se y is not a simple combination of the end members. The data confirm previous hypotheses that, in Li 2 TiS 2.4 Se 0.6 , this behavior is underpinned by concurrent and reversible redox of only S and Se, and identify key electronic states. Moreover, wavelet transforms of the extended X-ray absorption fine structure provide direct evidence of the formation of short Se–Se units upon charging. The study uncovers the underpinnings of this intriguing reactivity and highlights the richness of redox chemistry in complex solids.

25 ENERGY STORAGE↗

Reinforcement Learning-Guided Long-Timescale Simulation of Hydrogen Transport in Metals

Diffusion in alloys is an important class of atomic processes. However, atomistic simulations of diffusion in chemically complex solids are confronted with the timescale problem: the accessible simulation time is usually far shorter than that of experimental interest. In this work, long-timescale simulation methods are developed using reinforcement learning (RL) that extends simulation capability to match the duration of experimental interest. Two special limits, RL transition kinetics simulator (TKS) and RL low-energy states sampler (LSS), are implemented and explained in detail, while the meaning of general RL are also discussed. As a testbed, hydrogen diffusivity is computed using RL TKS in pure metals and a medium entropy alloy, CrCoNi, and compared with experiments. The algorithm can produce counter-intuitive hydrogen-vacancy cooperative motion. We also demonstrate that RL LSS can accelerate the sampling of low-energy configurations compared to the Metropolis–Hastings algorithm, using hydrogen migration to copper (111) surface as an example.

36 MATERIALS SCIENCE↗

Self-Referenced Method for Estimating Refractive Index and Absolute Absorption of Loose Semiconductor Powders

The absolute absorption coefficient, α(E), is a critical design parameter for devices using semiconductors for light harvesting associated with renewable energy production, both for classic technologies such as photovoltaics and for emerging technologies such as direct solar fuel production. While α(E) is well-known for many classic simple semiconductors used in photovoltaic applications, the absolute values of α(E) are typically unknown for the complex semiconductors being explored for solar fuel production due to the absence of single crystals or crystalline epitaxial films that are needed for conventional methods of determining α(E). In this work, a simple self-referenced method for estimating both the refractive indices, n(E), and absolute absorption coefficients, α(E), for loose powder samples using diffuse reflectance data is demonstrated. In this method, the sample refractive index can be deduced by refining n to maximize the agreement between the relative absorption spectrum calculated from bidirectional reflectance data (calculated through a Hapke transform which depends on n) and integrating sphere diffuse reflectance data (calculated through a Kubleka–Munk transform which does not depend on n). This new method can be quickly used to screen the suitability of emerging semiconductor systems for light-harvesting applications. The effectiveness of this approach is tested using the simple classic semiconductors Ge and Fe 2 O 3 as well as the complex semiconductors La 2 MoO 5 and La 4 Mo 2 O 11 . The method is shown to work well for powders with a narrow size distribution (exemplified by Fe 2 O 3 ) and to be ineffective for semiconductors with a broad size distribution (exemplified by Ge). As such, it provides a means for rapidly estimating the absolute optical properties of complex solids which are only available as loose powders.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Accuracy Transition Metal Effective Cores for the Many-Body Diffusion Monte Carlo Method

Practical applications of the real-space diffusion Monte Carlo (DMC) method require the removal of core electrons, where currently localization approximations of semilocal potentials are generally used in the projector. Accurate calculations of complex solids and large molecules demand minimizing the impact of approximated atomic cores. Prior works have shown that the errors from such approximations can be sizable in both finite and periodic systems. In this work, we show that a class of differential pseudopotentials, known as pseudo-Hamiltonians, can be constructed for the 3d transition metal atoms, entirely removing the need for any localization scheme in the DMC projector. As a proof of principle, we demonstrate the approach for the case of Co. In order to minimize errors in the pseudo-Hamiltonian at the many-body level, we generalize the recently proposed correlation-consistent pseudopotential generation scheme to successively close semilocal representations of the differential potentials. Our generation scheme successfully produces potentials tailored specifically for real space projector quantum Monte Carlo methods with low error at the many-body level, i.e., with many-body scattering properties very close to relativistic all-electron results. In particular, we show that the agreement with respect to atomic and molecular quantities reach chemical accuracy in many cases-on par with the most accurate semilocal pseudopotentials available. Further, our pseudo-Hamiltonian generation scheme utilizes standard quantum chemistry codes designed only to work with semilocal pseudopotentials, enabling straightforward generation of pseudo-Hamiltonians for additional elements in future works.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗