Search NASA⌕ Search

SEARCH · Search NASA

Results for “consistency model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Self-consistent models for the X-ray emission from supernova remnants - An application to Kepler's remnant

A tool for exploring the evolution of X-ray emission from young SNRs is presented which employs a novel approach to the problem of time-dependent ionization in a shock-heated plasma. The solution of this problem is coupled to a spherically symmetric hydrodynamic calculation for the evolution of a point explosion in a uniform medium. The method is applied to Kepler's SNR, and two narrowly constrained classes of models which can simultaneously fit the spectral and morphological features of the object are found. One of these is a Sedov model in which the emission arises from shocked ambient gas, and the other is a reverse-shock model in which the SN ejecta is the dominant source of radiation. The emission from one specific model in each class is compared with the radial surface brightness profile, the 0.2-4.5 keV broadband spectrum, and the 1-3 keV moderate-resolution spectrum of the remnant. Reasonable fits are obtained in both cases.

Hughes, J. P.↗
NASA NTRS1988

A physically consistent model for artificial dissipation in transonic potential flow computations

The effect that artificial dissipation has on numerical solutions of the transonic Full Potential Equation (FPE) are investigated by comparing the artificially dissipative FPE to a Physically Dissipative Potential (PDP) equation. Analytic expressions were derived from the variables C and M sub c that are used in the artificial density formulation. It was shown that these new values generate artificial dissipation which is equivalent to the physical dissipation existing in the PDP equation. The new expression for the variables C and M sub c can easily be incorporated into the existing full potential codes which are based either on the artificial density or on the artificial viscosity formulation. A comparison of Physically Dissipative Potential (PDP), Artificial Density or Viscosity (ADV), Artificial Mass Flux (AMF), and ADV with variable C and M sub c formulation (MCC) is also presented.

Dulikravich, George S.↗
NASA NTRS1990

Obtaining consistent models of helicopter flight-data measurement errors using kinematic-compatibility and state-reconstruction methods

A new method was developed for application of Kalman Filter/Smoothers to post-flight processing of helicopter flight test dynamic measurements. This processing includes checking for kinematic compatibility among the measurements, identification of a measurement error model, and reconstruction of both measured and unmeasured time histories. Emphasis is placed on identification of a parametric measurement error model which is valid for a set of flight test data. This is facilitated through a new method of concatenating several maneuver time histories. The method also includes a model structure determination step which ensures that a physically realistic parameterization has been achieved. Application of the method to a set of BO-105 flight test data is illustrated. The resulting minimally parameterized error model is shown to characterize the measurement errors of the entire data set with very little variation in the parameter values. Reconstructed time histories are shown to have increased bandwidths and signal to noise ratios.

Fletcher, Jay W.↗
NASA NTRS1992

A self-consistent model for the particles and fields upstream of an outgassing comet. II - A time-dependent description

In a previous paper, the global variation of the magnetic field and solar wind flow parameters in the unshocked region upstream of an outgassing comet was determined using a kinetic treatment for the cometary ions. Two different assumptions were made concerning the cometary ion distribution function: the pickup cometary ions formed either a velocity space gyrotropic ring distribution or a velocity space isotropic shell distribution in the solar wind frame of reference. In the present paper the general case is considered wherein the newly picked up ions are elastically pitch angle scattered from the initial ring distribution to a shell with some characteristic time scale. Using theoretically determined parameters which reflect the conditions expected at Comet Kopff (a typical short-period comet and a possible target for the CRAF/Cassini mission) for various heliocentric distances, how the pitch angle scattering rate affects the global morphology is determined.

Flammer, K.↗
NASA NTRS1993

A consistent model reduction of measured modal parameters for reduced-order active control

The problem of synthesizing reduced-order linear models of vibrating structures for the design of fixed-order dynamic feedback control is investigated. The present technique builds on a recently developed procedure for constructing an objective set of mass and stiffness matrices from measured modal parameters that are akin to the Craig-Bampton synthesized ones obtained from finite element models. The constructed mass and stiffness matrices are determined directly from the identification of experimental data, however, rather than through correlation or reconciliation of a finite element model. A model truncation criterion is then applied to the identified minimum-order mass and stiffness model to satisfy certain observability/controllability requirements for the reduced model. Numerical examples illustrate the effectiveness of the proposed technique for synthesizing reduced-order controllers from system realizations of experimental data. The dynamic performance of the resulting closed-loop models is assessed using the known full-order structural dynamics and compared with existing model reduction techniques.

Alvin, K. F.↗
NASA NTRS1996

Self-consistent modeling of inner magnetospheric convection

The initial results of a model of inner magnetospheric convection are presented. The model employs the Rice convection model with a magnetic field computed with the constraint of magnetostatic equilibrium. The approach computes equilibria from a magnetofriction code which is a modified version of the Hesse-Birn equilibrium code adopted for use in the inner magnetosphere. The code uses the pressure distribution computed from the Rice convection model to update the magnetic field. The algorithm used to compute the inner magnetospheric equilibria is outlined, and the coupling of the equilibrium code with the convection model is described.

Toffoletto, F. R.↗
NASA NTRS1997

Self-Consistent Models of Accretion Disks

The investigations of advection-dominated accretion flows (ADAFs), with emphasis on applications to X-ray binaries containing black holes and neutron stars is presented. This work is now being recognized as the standard paradigm for understanding the various spectral states of black hole X-ray Binaries (BHXBs). Topics discussed include: (1) Problem in BHXBS, namely that several of these binaries have unusually large concentrations of lithium in their companion stars; (2) A novel test to show that black holes have event horizons; (3) Application of the ADAF model to the puzzling X-ray delay in the recent outburst of the BHXB, GRO J1655-40; (4) Description of the various spectral states in BHXBS; (5) Application of the ADAF model to the famous supermassive black hole at the center of our Galaxy, Sgr A(*); (6) Writing down and solving equations describing steady-state, optically thin, advection-dominated accretion onto a Kerr black hole; (7) The effect of "photon bubble" instability on radiation dominated accretion disks; and (8) Dwarf nova disks in quiescence that have rather low magnetic Reynolds number, of order 10(exp 3).

Narayan, Ramesh↗
NASA NTRS2000

Self-Consistent Models of Accretion Disks

Research was carried out on several topics in the theory of astrophysical accretion flows around black holes, neutron stars and white dwarfs. The focus of our effort was the advection-dominated accretion flow (ADAF) model which the PI and his collaborators proposed and developed over the last several years. Our group completed a total of 46 papers, of which 36 are in refereed journals and 12 are in conference proceedings. All the papers have either already appeared in print or are in press.

Narayan, Ramesh↗
NASA NTRS1993

A formally verified algorithm for interactive consistency under a hybrid fault model

Consistent distribution of single-source data to replicated computing channels is a fundamental problem in fault-tolerant system design. The 'Oral Messages' (OM) algorithm solves this problem of Interactive Consistency (Byzantine Agreement) assuming that all faults are worst-cass. Thambidurai and Park introduced a 'hybrid' fault model that distinguished three fault modes: asymmetric (Byzantine), symmetric, and benign; they also exhibited, along with an informal 'proof of correctness', a modified version of OM. Unfortunately, their algorithm is flawed. The discipline of mechanically checked formal verification eventually enabled us to develop a correct algorithm for Interactive Consistency under the hybrid fault model. This algorithm withstands $a$ asymmetric, $s$ symmetric, and $b$ benign faults simultaneously, using $m+1$ rounds, provided $n is greater than 2a + 2s + b + m$, and $m\geg a$. We present this algorithm, discuss its subtle points, and describe its formal specification and verification in PVS. We argue that formal verification systems such as PVS are now sufficiently effective that their application to fault-tolerance algorithms should be considered routine.

Lincoln, Patrick↗
NASA NTRS2016

Model Order Reduction of Aeroservoelastic Model of Flexible Aircraft

This paper presents a holistic model order reduction (MOR) methodology and framework that integrates key technological elements of sequential model reduction, consistent model representation, and model interpolation for constructing high-quality linear parameter-varying (LPV) aeroservoelastic (ASE) reduced order models (ROMs) of flexible aircraft. The sequential MOR encapsulates a suite of reduction techniques, such as truncation and residualization, modal reduction, and balanced realization and truncation to achieve optimal ROMs at grid points across the flight envelope. The consistence in state representation among local ROMs is obtained by the novel method of common subspace reprojection. Model interpolation is then exploited to stitch ROMs at grid points to build a global LPV ASE ROM feasible to arbitrary flight condition. The MOR method is applied to the X-56A MUTT vehicle with flexible wing being tested at NASA/AFRC for flutter suppression and gust load alleviation. Our studies demonstrated that relative to the fullorder model, our X-56A ROM can accurately and reliably capture vehicles dynamics at various flight conditions in the target frequency regime while the number of states in ROM can be reduced by 10X (from 180 to 19), and hence, holds great promise for robust ASE controller synthesis and novel vehicle design.

aeroelasticity↗
NASA NTRS1979

Viscosity and thermal conductivity of model Jupiter atmospheres

The viscosity and thermal conductivity coefficient are estimated for three models of the atmosphere of Jupiter: a heavy model consisting of 22% helium and 78% hydrogen, a nominal model consisting of 11% helium and 89% hydrogen, and a light model consisting of pure hydrogen. The effect of trace elements is neglected. Linearized approximations are used for the transport coefficients of the mixtures; these are found to be in almost constant ratio to the values for pure hydrogen, independent of temperature. Short Basic language programs for computing the coefficients are listed.

Hansen, C. F.↗
NASA NTRS1992

The relationship between delta C-13 of organic matter and (CO2(aq)) in ocean surface water - Data from the JGOFS site in the northeast Atlantic Ocean and a model

Consistent with the hypothesis that plankton delta C-14 and (CO2(aq)) are inversely related, increases in both sinking and suspended particulate organic matter (POM) delta C-13 detected by the Joint Global Ocean Flux Study (JGOFS) were highly negatively correlated with mixed-layer (CO2(aq)). A model of plant delta C-13 by Farquhar et al. (1982) is adapted to show that under a constant phytoplankton demand for CO2 an inverse nonlinear suspended POM delta C-13 response to ambient (CO2(aq)) is expected. Differences between predicted and observed suspended POM delta C-13 vs. (CO2(aq)) trends and among observed relationships can be reconciled if biological CO2 demand is allowed to vary.

Rau, G. H.↗
NASA NTRS2011

Time Variable Gravity modeling for Precise Orbits Across the TOPEX/Poseidon, Jason-l and Jason-2 Missions

Modeling of the Time Variable Gravity (TVG) is believed to constitute one of the the largest remaining source of orbit error for altimeter satellite POD. The GSFC operational TVG model consists of forward modeling the atmospheric gravity using ECMWF 6-hour pressure data, a GRACE derived 20x20 annual field to account for changes in the hydrology and ocean water mass, and linear rates for C20, C30, C40, based on 17 years of SLR data analysis (IERS 2003) using the EIGEN-GL04S1 (a GRACE+Lageos-based geopotential solution). Although the GSFC Operational model can be applied from 1987, there may be long-term variations not captured by these linear models, and more importantly the linear models may not be consistent with more recent surface mass trends due to global climate change, We have evaluated the impact of TVG in two different wavs: (1) by using the more recent EIGEN-6S gravity model developed by the GFZ/GRGS tearm, which consists of annual, semi-annual and secular changes in the coefficients to 50x50 determined over 8(?) years of GRACE+Lageos+GOCE data (2003-200?): (2) Application of 4x4 solutions developed from a multi satellite SLR+DORIS solution based on GGM03S that span the period from 1993 to 2011. We have evaluated the recently released EIGEN6s static and time-varying gravity field for Jason-2 (J2). Jason-I (J1), and TOPEX/Posiedon (TP) Precise Orbit Determination (POD) spanning 1993-2011. Although EIGEN6s shows significant improvement for J2POD spanning 2008 - 2011, it also shows significant degradation for TP POD from 1992. The GSFC 4x4 time SLR+DORIS-based series spans 1993 to mid 2011, and shows promise for POD. We evaluate the performance of the different TVG models based on analysis of tracking data residuals use of independent data such as altimeter crossovers, and through analysis of differences with internally-generated and externally generated orbits.

Zelensky, Nikita P.↗
NASA NTRS1995

Self consistent MHD modeling of the solar wind from coronal holes with distinct geometries

Utilizing an iterative scheme, a self-consistent axisymmetric MHD model for the solar wind has been developed. We use this model to evaluate the properties of the solar wind issuing from the open polar coronal hole regions of the Sun, during solar minimum. We explore the variation of solar wind parameters across the extent of the hole and we investigate how these variations are affected by the geometry of the hole and the strength of the field at the coronal base.

Stewart, G. A.↗
NASA NTRS2019

NICER Observes a Secondary Peak in the Decay of a Thermonuclear Burst from 4U 1608-52

We report for the first time below 1.5 keV, the detection of a secondary peak in an Eddington-limited thermonuclear X-ray burst observed by the Neutron Star Interior Composition Explorer (NICER) from the low-mass X-ray binary 4U 1608–52. Our time-resolved spectroscopy of the burst is consistent with a model consisting of a varying-temperature blackbody, and an evolving persistent flux contribution, likely attributed to the accretion process. The dip in the burst intensity before the secondary peak is also visible in the bolometric flux. Prior to the dip, the blackbody temperature reached a maximum of ≈3 keV. Our analysis suggests that the dip and secondary peak are not related to photospheric expansion, varying circumstellar absorption, or scattering. Instead, we discuss the observation in the context of hydrodynamical instabilities, thermonuclear flame spreading models, and reburning in the cooling tail of the burst.

Gaurava K. Jaisawal↗
NASA NTRS1989

Probalistic structural analysis methods for select space propulsion system structural components

A summary of the status of this five-year project which is now in its third year of research and development is presented. The goal of the project is the development of several methodologies for probabilistic structural modeling. Probabilistic structural modeling consists of stochastic models of material properties, part geometries, boundary conditions, as well as loading conditions. The current presentation focuses on one methodology - coupling of an advanced finite element structural analysis code with probabilistic modeling strategies. The essential algorithm developments for combining the finite element and probabilistic analysis methods are reported. The validity of the resulting probabilistic structural analysis method is confirmed through a series of test problems with exact results based on Monte Carlo simulations. Additionally, the applicability of the method to a Space Propulsion System (a turbine blade) is demonstrated for static stresses.

Cruse, T. A.↗
NASA NTRS1993

Effective thermoelastic and thermal properties of unidirectional fiber-reinforced composites and their sensitivity coefficients

Three-dimensional finite element models are used to assess the accuracy of the thermoelastic and thermal properties of unidirectional fiber-reinforced composites predicted by six different micromechanical models. The six models are: simple mechanics of materials type equations, fiber substructuring model, vanishing fiber diameter model, self-consistent model, Mori-Tanaka model, and method of cells. In addition, the finite element models are used to assess the accuracy of derivatives of the effective properties, with respect to each of the constituent material properties and fiber-volume ratio, computed using the six micromechanical models. The predictions of the micromechanical and finite element models for four advanced composite material systems are compared with experimental data. The results obtained in the present study show that the predictions of the Mori-Tanaka model and the method of cells are closer to those of the finite element models than those of all the other micromechanical models.

Noor, Ahmed K.↗