Search NASA⌕ Search

SEARCH · Search NASA

Results for “context modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

A New Approach to Evaluate and Reduce Uncertainty of Model-Based Biodiversity Projections for Conservation Policy Formulation

Biodiversity projections with uncertainty estimates under different climate, land-use, and policy scenarios are essential to setting and achieving international targets to mitigate biodiversity loss. Evaluating and improving biodiversity predictions to better inform policy decisions remains a central conservation goal and challenge. A comprehensive strategy to evaluate and reduce uncertainty of model outputs against observed measurements and multiple models would help to produce more robust biodiversity predictions. We propose an approach that integrates biodiversity models and emerging remote sensing and in-situ data streams to evaluate and reduce uncertainty with the goal of improving policy-relevant biodiversity predictions. In this article, we describe a multivariate approach to directly and indirectly evaluate and constrain model uncertainty, demonstrate a proof of concept of this approach, embed the concept within the broader context of model evaluation and scenario analysis for conservation policy, and highlight lessons from other modeling communities.

Bonnie J E Myers↗

A Critical Survey of Optimization Models for Tactical and Strategic Aspects of Air Traffic Flow Management

This document presents a critical review of the principal existing optimization models that have been applied to Air Traffic Flow Management (TFM). Emphasis will be placed on two problems, the Generalized Tactical Flow Management Problem (GTFMP) and the Ground Holding Problem (GHP), as well as on some of their variations. To perform this task, we have carried out an extensive literature review that has covered more than 40 references, most of them very recent. Based on the review of this emerging field our objectives were to: (i) identify the best available models; (ii) describe typical contexts for applications of the models; (iii) provide illustrative model formulations; and (iv) identify the methodologies that can be used to solve the models. We shall begin our presentation below by providing a brief context for the models that we are reviewing. In Section 3 we shall offer a taxonomy and identify four classes of models for review. In Sections 4, 5, and 6 we shall then review, respectively, models for the Single-Airport Ground Holding Problem, the Generalized Tactical FM P and the Multi-Airport Ground Holding Problem (for the definition of these problems see Section 3 below). In each section, we identify the best available models and discuss briefly their computational performance and applications, if any, to date. Section 7 summarizes our conclusions about the state of the art.

Bertsimas, Dimitris↗

Evaluating Meteorological Dust Events and Machine-Learning Based Dust Identification in Geostationary Satellite Imagery

NASA scientists in the Short-term Prediction Research and Transition Center (SPoRT) developed a physically-based machine learning approach to identify dust in satellite imagery with a focus on night-time dust detection (Berndt et al. 201; DustTracker-AI). NASA/NOAA Geostationary Environmental Operational Satellite-16 (GOES-16) imagery was used for training and model inputs. The training, testing and validation data set consists of 28 events in the Southwest United States, capturing dust and null events in the region from 2018-2020.With 83 distinct images and millions of pixels a random forest model was trained and validated, correctly labeling 85% of dust pixels.For the first time, the model was run in near-real time production during the spring of 2022 and dust probability visualizations were made available to NOAA National Weather Service (NWS) forecasters to assess its utility for dust forecasting. Results indicated the model helped increase the confidence in the presence of dust and enabled dust tracking for a longer period of time into the night-time hours. Forecaster assessment and running the model in near real-time allowed for the team to determine the types of events missed, captured, and false alarms. To gain additional context on model performance,the SPoRT team sought to gather more detailed information on the training database(e.g., meteorological characteristics and drivers). The goal of this project was to identify the meteorological drivers for the dust events and create a database which synthesized information from observations, forecaster discussions, and analyses pertaining to the dust events to understand the types of events currently used to train the model. A more detailed meteorological synopsis was created for each dust event in the training, testing, and validation datasets. Following the completion of the database and documentation, the classification details revealed that 88% of the dust events were synoptically driven while mesoscale events were less prevalent in model datasets. Meteorological conditions found such as mixing layer depth and wind velocity had mean values of 645mb and 21kt respectively.With conditions of deep mixed layers and moderate to strong surface winds a mesoscale thunderstorm outflow event was considered and subsequently added to the model training data set to test the impact of additional mesoscale training data. The model was retrained and then qualitatively tested on a sample thunderstorm outflow case that the original model was unable to identify. Preliminary results showed potential that the addition of more mesoscale events included in the training data could help to better identify indistinct and localized dust events.

Connor Welch↗

Forced flow He II in relation to stability of internally cooled superconductors

Current understanding of forced flow He II as it is used to cool large superconducting devices is presented. Experimental measurements of pressure loss and heat transfer to He II at relatively high flow rates are compared with classical hydrodynamic relations and theoretical models based on two fluid hydrodynamics. The results of this analysis suggest that reliable design of large scale systems is achievable. Implications to forced flow He II cooling of superconducting magnets are discussed in the context of model stability experiments on internally cooled composite superconductors.

Van Sciver, S. W.↗

Contrast affects flicker and speed perception differently

We have previously shown that contrast affects speed perception, with lower-contrast, drifting gratings perceived as moving slower. In a recent study, we examined the implications of this result on models of speed perception that use the amplitude of the response of linear spatio-temporal filters to determine speed. In this study, we investigate whether the contrast dependence of speed can be understood within the context of models in which speed estimation is made using the temporal frequency of the response of linear spatio-temporal filters. We measured the effect of contrast on flicker perception and found that contrast manipulations produce opposite effects on perceived drift rate and perceived flicker rate, i.e., reducing contrast increases the apparent temporal frequency of counterphase modulated gratings. This finding argues that, if a temporal frequency-based algorithm underlies speed perception, either flicker and speed perception must not be based on the output of the same mechanism or contrast effects on perceived spatial frequency reconcile the disparate effects observed for perceived temporal frequency and speed.

NASA Center ARC↗

Propel: Tools and Methods for Practical Source Code Model Checking

The work reported here is an overview and snapshot of a project to develop practical model checking tools for in-the-loop verification of NASA s mission-critical, multithreaded programs in Java and C++. Our strategy is to develop and evaluate both a design concept that enables the application of model checking technology to C++ and Java, and a model checking toolset for C++ and Java. The design concept and the associated model checking toolset is called Propel. It builds upon the Java PathFinder (JPF) tool, an explicit state model checker for Java applications developed by the Automated Software Engineering group at NASA Ames Research Center. The design concept that we are developing is Design for Verification (D4V). This is an adaption of existing best design practices that has the desired side-effect of enhancing verifiability by improving modularity and decreasing accidental complexity. D4V, we believe, enhances the applicability of a variety of V&V approaches; we are developing the concept in the context of model checking. The model checking toolset, Propel, is based on extending JPF to handle C++. Our principal tasks in developing the toolset are to build a translator from C++ to Java, productize JPF, and evaluate the toolset in the context of D4V. Through all these tasks we are testing Propel capabilities on customer applications.

Mansouri-Samani, Massoud↗

Real-time antenna fault diagnosis experiments at DSS 13

Experimental results obtained when a previously described fault diagnosis system was run online in real time at the 34-m beam waveguide antenna at Deep Space Station (DSS) 13 are described. Experimental conditions and the quality of results are described. A neural network model and a maximum-likelihood Gaussian classifier are compared with and without a Markov component to model temporal context. At the rate of a state update every 6.4 seconds, over a period of roughly 1 hour, the neural-Markov system had zero errors (incorrect state estimates) while monitoring both faulty and normal operations. The overall results indicate that the neural-Markov combination is the most accurate model and has significant practical potential.

Mellstrom, J.↗

Solution of the hydrodynamic device model using high-order non-oscillatory shock capturing algorithms

A micron n+ - n - n+ silicon diode is simulated via the hydrodynamic model for carrier transport. The numerical algorithms employed are for the non-steady case, and a limiting process is used to reach steady state. The simulation employs shock capturing algorithms, and indeed shocks, or very rapid transition regimes, are observed in the transient case for the coupled system, consisting of the potential equation and the conservation equations describing charge, momentum, and energy transfer for the electron carriers. These algorithms, termed essentially nonoscillatory, were successfully applied in other contexts to model the flow in gas dynamics, magnetohydrodynamics, and other physical situations involving the conservation laws in fluid mechanics. The method here is first order in time, but the use of small time steps allows for good accuracy. Runge-Kutta methods allow one to achieve higher accuracy in time if desired. The spatial accuracy is of high order in regions of smoothness.

Fatemi, Emad↗

Solution of the hydrodynamic device model using high-order non-oscillatory shock capturing algorithms

A micron n+ - n - n+ silicon diode is simulated via the hydrodynamic model for carrier transport. The numerical algorithms employed are for the non-steady case, and a limiting process is used to reach steady state. The simulation employs shock capturing algorithms, and indeed shocks, or very rapid transition regimes, are observed in the transient case for the coupled system, consisting of the potential equation and the conservation equations describing charge, momentum, and energy transfer for the electron carriers. These algorithms, termed essentially non-oscillatory, were successfully applied in other contexts to model the flow in gas dynamics, magnetohydrodynamics, and other physical situations involving the conservation laws in fluid mechanics. The method here is first order in time, but the use of small time steps allows for good accuracy. Runge-Kutta methods allow one to achieve higher accuracy in time if desired. The spatial accuracy is of high order in regions of smoothness.

Fatemi, Emad↗

Interpretation of Lidar and Satellite Data Sets Using a Global Photochemical Model

A primary goal of the NASA Tropospheric Chemistry Program (TCP) is to "contribute substantially to scientific understanding of human impacts on the global troposphere". In order to analyze global or regional trends and factors of the troposphere chemistry, for example, its oxidation capacity or composition, a continuous global/regional data coverage as well as model simulations are needed. The Global Tropospheric Experiment (GTE), a major component of the TCP, provides data vital to these questions via aircraft measurement of key trace chemical species in various remote regions of the world. Another component in NASA's effort are satellite projects for exploration of tropospheric chemistry and dynamics. A unique data product is the Tropospheric Ozone Residual (TOR) utilizing global tropospheric ozone data. Another key research tool are simulation studies of atmospheric chemistry and dynamics for the theoretical understanding of the atmosphere, the extrapolation of observed trends, and for sensitivity studies assessing a changing anthropogenic impact to air chemistry and climate. In the context with model simulations, field data derived from satellites or (airborne) field missions are needed for two purposes: 1. To initialize and validate model simulations, and 2., to interpret field data by comparison to model simulation results in order to analyze global or regional trends and deviations from standard tropospheric chemistry and transport conditions as defined by the simulations. Currently, there is neither a sufficient global data coverage available nor are existing well established global circulation models. The NASA LARC CTM model is currently not yet in a state to accomplish a sufficient tropospheric chemistry simulation, so that the current research under this cooperative agreement focuses on utilizing field data products for direct interpretation. They will be also available for model testing and a later interpretation with a finally utilized model.

Zenker, Thomas↗

Estimation in a discrete tail rate family of recapture sampling models

In the context of recapture sampling design for debugging experiments the problem of estimating the error or hitting rate of the faults remaining in a system is considered. Moment estimators are derived for a family of models in which the rate parameters are assumed proportional to the tail probabilities of a discrete distribution on the positive integers. The estimators are shown to be asymptotically normal and fully efficient. Their fixed sample properties are compared, through simulation, with those of the conditional maximum likelihood estimators.

Gupta, Rajan↗

The relevance of solar flares to astrophysics

The physical mechanisms associated with solar flares are reviewed. The relevance of flare mechanisms to other astrophysical phenomena is discussed. In this context, specific models of quasars and radio galaxies, Sco X-1 and gamma-ray bursts are examined.

Sturrock, P. A.↗

The relation of mantle heterogeneity to the bulk composition and origin of the earth

The heterogeneity of the mantle can be viewed in the context of models for accretion of the terrestrial planets from the solar nebula. Oxygen isotope ratios and mineralogy indicate the existence of hot planetesimals of diverse compositions. Assuming that nebular condensates range from a reduced state near the sun to an oxidized state near Jupiter, a new model is proposed for heterogeneous accretion of the earth beginning with hot, reduced condensates and ending with cool, oxidized condensates. The Ganapathy-Anders cosmochemical model for the bulk composition of the earth was tested by summing measured compositions for the three outer zones and likely compositions for the inner zones. Revisions are suggested, including reduction of the content of the early condensate from that suggested by taking the U concentration as 30 ng/g, as suggested by the naive interpretation of the heat flow.

Smith, J. V.↗

The outer atmosphere of Procyon (Alpha CMi F5IV-V) - Evidence of supergranulation or active regions

Observations made with the Einstein X-ray observatory and Exosat have shown Procyon (Alpha CMi) to have a measurable X-ray flux. The flux observed is similar to the upper limits previously reported. The interpretation of the X-ray data in the context of models made previously by Brown and Jordan (1981) based on spectra obtained with the IUE satellite. The X-ray data lead to a higher electron pressure than does the UV spectrum. These results support the conclusion by Brown and Jordan that the UV data cannot be reconciled with a hot corona in a spherically symmetric uniform model. Two types of models are explored; one in which the X-ray emission originates from an isothermal corona but the UV emission is restricted to limited regions of the disk, analogous to solar supergranulation structure; the other in which hot loop structures are embedded in a cool (T(e) of about 300,000 K) corona. Monitoring of Procyon to search for variability is urgently required to distinguish between these models. Some comparisons with the predictions of scaling laws are made. This hot isothermal coronal model agrees quite well with the predictions of Hearn's (1977) minimum flux model.

Jordan, C.↗

A review of the R Aquarii system

Results of IR, radio, optical, UV, and X-ray observations of the D-type symbiotic R Aquarii system, obtained since early observations by Lampland in the 1920s, are described. These data are discussed in context with models which were proposed to explain the appearance of the brilliant jet. It is proposed that R Aqr might constitute a prototype of directed mass loss or jet activity in symbiotic systems.

Michalitsianos, A. G.↗

Workshop on New Views of the Moon: Integrated Remotely Sensed, Geophysical, and Sample Datasets

It has been more than 25 years since Apollo 17 returned the last of the Apollo lunar samples. Since then, a vast amount of data has been obtained from the study of rocks and soils from the Apollo and Luna sample collections and, more recently, on a set of about a dozen lunar meteorites collected on Earth. Based on direct studies of the samples, many constraints have been established for the age, early differentiation, crust and mantle structure, and subsequent impact modification of the Moon. In addition, geophysical experiments at the surface, as well as remote sensing from orbit and Earth-based telescopic studies, have provided additional datasets about the Moon that constrain the nature of its surface and internal structure. Some might be tempted to say that we know all there is to know about the Moon and that it is time to move on from this simple satellite to more complex objects. However, the ongoing Lunar Prospector mission and the highly successful Clementine mission have provided important clues to the real geological complexity of the Moon, and have shown us that we still do not yet adequately understand the geologic history of Earth's companion. These missions, like Galileo during its lunar flyby, are providing global information viewed through new kinds of windows, and providing a fresh context for models of lunar origin, evolution, and resources, and perhaps even some grist for new questions and new hypotheses. The probable detection and characterization of water ice at the poles, the extreme concentration of Th and other radioactive elements in the Procellarum-Imbrium-Frigon's resurfaced areas of the nearside of the Moon, and the high-resolution gravity modeling enabled by these missions are examples of the kinds of exciting new results that must be integrated with the extant body of knowledge based on sample studies, in situ experiments, and remote-sensing missions to bring about the best possible understanding of the Moon and its history.

Jolliff, Brad L.↗

Discovery of a 6.4 keV Emission Line in a Burst from SGR 1900+14

We present evidence indicating the presence of a 6.4 keV emission line during a burst from the soft gamma-ray repeater SGR 1900+14. The Rossi X-ray Timing Explorer (RXTE) Monitored this source extensively during its outburst in the summer of 1998. A strong burst observed on August 29, 1998 revealed a number of unique properties. The burst exhibits a precursor and is followed by a long ($\sim 10(+)3$ s) tail modulated at the 5.16 s stellar rotation period. The precursor has a duration of $\sim 0.85$ s and shows both significant spectral evolution as well as an emission feature centered near 6.4 keV during the first 0.3 s of the event, when the X-ray spectrum was hardest. The continuum during the burst is well fit with an optically thin thermal bremsstrahlung (OTTB) spectrum with the temperature ranging from as high as $\sim 40$ to as low as 10 keV. The line is strong, with an equivalent width of $\sim 400$ eV, and the centroid is consistent with Fe K-$\alpha$ fluorescence from relatively cool material. If the rest-frame energy is indeed 6.4 keV, then the lack of an observed redshift indicates that the source of the line is at least $\sim 80$ km above the surface of the neutron star. We briefly discuss the implications of the line detection in the context of models for SGRs.

Strohmayer, Tod↗

Tropospheric Ozone Pollution Transport Traced from the TOMS (Total Ozone Mapping Spectrometer) Instrument During the Nashville-1999 Campaign

Over the past several years, we have developed two new tropospheric ozone retrievals from the TOMS (Total Ozone Mapping Spectrometer) satellite instrument that are of sufficient resolution to follow pollution episodes. The modified-residual technique [Hudson and Thompson, 1998; Thompson and Hudson, 1999] uses v. 7 TOMS total ozone and is applicable to tropical regimes in which the wave-one pattern in total ozone is observed. The TOMS-direct method [("TDOT" = TOMS Direct Ozone in the Troposphere; Frolov et al., 2000] represents a new algorithm that uses TOMS radiances directly (i.e., not previously processed for TOMS ozone) to extract tropospheric ozone in regions of constant stratospheric ozone and tropospheric ozone displaying high mixing ratios and variability characteristic of pollution. These events tend to occur in certain meteorological regimes. For example, mid-latitude pollution usually occurs on the backside of subtropical fronts, as low pv, usually moist air intrudes to the extra-tropics. July 1999 was a month characterized by robust pollution in the eastern US, with high ozone, as detected by TOMS, originating over south central states and moving up the Atlantic seaboard. This corresponds to 50-80 DU in tropospheric ozone column depth. In most cases, further transport occurred to the North Atlantic, with ozone plumes traveling to western Europe in 4-5 days. Examples of high ozone and transit across boundaries within the US, as well as US->Europe, give a regional context for model results and field measurements taken in the SE US during the Nashville-1999 campaign period. Validation of the TDOT maps is made with ozonesondes taken during that time. TDOT maps also show ozone pollution from Asia traveling to the western US in July 1999.

Thompson, Anne M.↗