Search NASA⌕ Search

SEARCH · Search NASA

Results for “continental”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Thermal and mechanical structure of the upper mantle: A comparison between continental and oceanic models

Temperature, velocity, and viscosity profiles for coupled thermal and mechanical models of the upper mantle beneath continental shields and old ocean basins show that under the continents, both tectonic plates and the asthenosphere, are thicker than they are beneath the oceans. The minimum value of viscosity in the continental asthenosphere is about an order of magnitude larger than in the shear zone beneath oceans. The shear stress or drag underneath continental plates is also approximately an order of magnitude larger than the drag on oceanic plates. Effects of shear heating may account for flattening of ocean floor topography and heat flux in old ocean basins.

Froidevaux, C.↗

Analysis and retracking of continental ice sheet radar altimeter waveforms

The Seasat-1 radar altimeter data set acquired over both the Antarctic and Greenland continental ice sheets is analyzed to obtain corrected ranges to the ice surface. The radar altimeter functional response over the continental ice sheets is considerably more complex than over the oceans. Causal factors identified in this complicated response include sloping surfaces, undulating ice surfaces with characteristic wavelengths on the same spatial scale as the altimeter beam-limited footprint, off-track reflections, and dynamic lag of the altimeter tracking circuit. Retracking methods using the altimeter return pulse waveforms give range corrections that are typically several meters. The entire set of Seasat-1 altimetry over the continental ice sheets is being retracked by fitting a multi-parameter function to each waveform. Many waveforms have double ramps indicating near-normal reflections from two distinct portions of the ice surface within the altimeter beam. Two independent range measurements differing by less than 25 m are obtained from retracking the double-ramp waveforms.

Martin, T. V.↗

Digital images of combined oceanic and continental data sets and their use in tectonic studies

It is shown how crustal and lithospheric studies can benefit when continental and oceanic data sets are combined. It is also shown how digital imaging techniques provide an effective means for displaying the information contained in these combined data sets. The region of Australia, New Zealand, and the surrounding ocean is chosen for illustrating the advantages of combining continental and oceanic data sets. Here, the tectonic setting of Australia, a relatively stable continent in an intraplate environment, can be contrasted with New Zealand, which is traversed by one of the world's major plate boundaries. Simultaneous display and analysis of complementary data sets make possible a rapid geologic and tectonic interpretation of regional areas. It is shown, by way of example, that the relationship between topography and gravity anomalies in central Australia gives important new information concerning the state of isostasy of thrust terrains and their related sedimentary basins and hence provides a means of understanding the mechanical properties of the continental lithosphere.

Haxby, W. F.↗

Thermal regime of the continental lithosphere

From studies of the global heat flow data set, it has been generalized, with respect to the continental lithosphere, that there is a negative correlation between heat flow and the lithosphere's tectonic edge, and that the lithosphere's thermal evolution is similar to that of the ocean basins, resulting in a 'stable geotherm' in both environments. It is presently noted that a regional study perspective for heat flow data leads to doubts concerning the general applicability of either statement. Rao et al. (1982) have demonstrated that the data are not normally distributed, and that it is not possible to establish a negative correlation between heat flow and age in a rigorous statistical fashion. While some sites of stable continental blocks may have a geotherm that is by chance similar to that for old ocean basins, this need not hold true generally, and many stable continental terranes will be characterized by geotherms very different from those for old ocean basins.

Morgan, P.↗

Constraints on the development of the early continental crust from isotopic data

Aspects of the origin and development of the early (AE) continential crust are addressed by radiogenic isotope and trace element studies. The most important ones are: (1) at what time did the earliest continental crust form; (2) what was its composition; (3) by what processes did it grow and by what processes was it destroyed; (4) what were the rates of production and destruction as a function of time during this time period? Nd is isotopic data on the oldest terrestrial rocks indicate that the mantle at this time had already suffered substantial depletion in incompatible elements due to earlier continent forming events. Isotopic data on young volcanic rocks derived from the depleted mantle show no evidence of this early history. The observed isotopic patterns of Nd, Sr, Hf and Pb through time together with the presently observed age spectrum of crustal rocks are considered. These patterns can be modelled by a transport model in which the continental growth and destruction rates are allowed to vary as a function of time. It is suggest that the mass of the continents at 3.8 AE ago was about 25% of the current continental mass. However, due to the very high recycling rates obtained in the early Archean only a few percent of this crust has been preserved up to the present.

Jacobson, S. B.↗

Crustal radiogenic heat production and the selective survival of ancient continental crust

It is pointed out that the oldest terrestrial rocks have so far revealed no evidence of the impact phase of Earth evolution. This observation suggests that processes other than impact were dominant at the time of stabilization of these units. However, a use of the oldest terrestrial rocks as a sample of the early terrestrial crust makes it necessary to consider the possibility that these rocks may represent a biased sample. In the present study, the global continental heat flow data set is used to provide further evidence that potassium, uranium, and thorium abundances are, on the average, low in surviving Archean crust relative to younger continental crust. An investigation is conducted of the implications of relatively low crustal radiogenic heat production to the stabilization of early continental crust, and possible Archean crustal stabilization models are discussed.

Morgan, P.↗

Magsat and POGO magnetic anomalies over the Lord Howe Rise Evidence against a simple continental crustal structure

Magsat average scalar and POGO reduced-to-pole magnetic anomaly data both show prominent positive signatures over the Lord Howe Rise. Although generally assumed to be continental in nature, the Lord Howe Rise cannot simply be submerged ordinary continental crust, which would produce a negative anomaly contrast with respect to the surrounding higher susceptibility oceanic crust. Three-dimensional modeling of the plateau, using the known crustal structure and assuming an induced origin for the satellite elevation anomaly, leads to a model in which the lowest crustal layer in an otherwise 'continental' crustal structure has an unusually high susceptibility in the range cgs 0.008-0.010 (SI 0.10-0.13). Replacement or alteration of the lowest layer by a high-susceptibility rock type may be related to the subsidence of the plateau.

Frey, H.↗

Crustal radiogenic heat production and the selective survival of ancient continental crust

It is pointed out that the oldest terrestrial rocks have so far revealed no evidence of the impact phase of earth evolution. This observation suggests that processes other than impact were dominant at the time of stabilization of these units. However, a use of the oldest terrestrial rocks as a sample of the early terrestrial crust makes it necessary to consider the possibility that these rocks may represent a biased sample. In the present study, the global continental heat flow data set is used to provide further evidence that potassium, uranium, and thorium abundances are, on the average, low in surviving Archean crust relative to younger continental crust. An investigation is conducted of the implications of relatively low crustal radiogenic heat production to the stabilization of early continental crust, and possible Archean crustal stabilization models are discussed.

Morgan, P.↗

Continental volume and freeboard through geological time

The consequences of approximately constant freeboard for continental growth are explored using a model that relates the volumes of isostatically compensated continents and oceans to the secular decline in terrestrial heat flow. It is found that a post-Archean increase in freeboard by 200 m requires continental growth of only 10 percent, while a decrease in freeboard by 200 m during this same period necessitates a crustal growth of 40 percent. Shrinkage of the continental crust since the end of the Archean can be ruled out. Changes of more than 10 percent in post-Archean crustal thickness are highly unlikely.

Schubert, G.↗

Is the Ventersdorp rift system of southern Africa related to a continental collision between the Kaapvaal and Zimbabwe Cratons at 2.64 Ga AGO?

Rocks of the Ventersdorp Supergroup were deposited in a system of northeast trending grabens on the Kaapvaal Craton approximately 2.64 Ga ago contemporary with a continental collision between the Kaapvaal and Zimbabwe Cratons. It is suggested that it was this collision that initiated the Ventersdorp rifting. Individual grabens strike at high angles toward the continental collision zone now exposed in the Limpopo Province where late orogenic left-lateral strike-slip faulting and anatectic granites are recognized. The Ventersdorp rift province is related to extension in the Kaapvaal Craton associated with the collision, and some analogy is seen with such rifts as the Shansi and Baikal Systems associated with the current India-Asia continental collision.

Burke, K.↗

Thermal implications of metamorphism in greenstone belts and the hot asthenosphere-thick continental lithoshere paradox

From considerations of secular cooling of the Earth and the slow decay of radiogenic heat sources in the Earth with time, the conclusion that global heat loss must have been higher in the Archean than at present seems inescapable. The mechanism by which this additional heat was lost and the implications of higher heat low for crustal temperatures are fundamental unknowns in our current understanding of Archean tectonics and geological processes. Higher heat loss implies that the average global geothermal gradient was higher in the Archean than at present, and the restriction of ultramafic komatiites to the Archean and other considerations suggests that the average temperature of the mantle was several hundred degrees hotter during the Archean than today. In contrast, there is little petrologic evidence that the conditions of metamorphism or crustal thickness (including maximum crustal thickness under mountains) were different in archean continental crust from the Phanerozoic record. Additionally, Archean ages have recently been determined for inclusions in diamonds from Cretaceous kimeberlites in South Africa, indicating temperatures of 900 to 1300 at depths of 150 to 215 km (45 to 65 kbar) in the Archean mantle, again implying relatively low geothermal gradients at least locally in the Archean. The thermal implications of metamorphism are examined, with special reference to greenstone belts, and a new thermal model of the continental lithosphere is suggested which is consistent with thick continental lithosphere and high asthenosphere temperatures in the Archean.

Morgan, P.↗

Finite strain calculations of continental deformation. I - Method and general results for convergent zones. II - Comparison with the India-Asia collision zone

The present investigation has the objective to perform numerical experiments on a rheologically simple continuum model for the continental lithosphere. It is attempted to obtain a better understanding of the dynamics of continental deformation. Calculations are presented of crustal thickness distributions, stress, strain, strain rate fields, latitudinal displacements, and finite rotations, taking into account as basis a model for continental collision which treats the litoshphere as a thin viscous layer subject to indenting boundary conditions. The results of this paper support the conclusions of England and McKenzie (1982) regarding the role of gravity in governing the deformation of a thin viscous layer subject to indenting boundary conditions. The results of the experiments are compared with observations of topography, stress and strain rate fields, and palaeomagnetic latitudinal displacements in Asia.

Houseman, G.↗

Computer simulations of 10-km-diameter asteroid impacts into oceanic and continental sites: Preliminary results on atmospheric passage, cratering and ejecta dynamics

A series of analytical calculations of large scale cratering events for both oceanic and continental sites were made in order to examine their effects on the target media and atmosphere. The first analytical studies that were completed consists of computer simulations of the dynamics of: (1) the passage of a 10 km diameter asteroid moving at 20 km/sec through the Earth's atmosphere, and (2) the impact cratering events in both oceanic and continental environments. Calculation of the dynamics associated with the passage of the asteroid through the atmosphere showed strong effects on the surrounding air mass. The calculations of the impact cratering events showed equally dramatic effects on the oceanic and continental environments. These effects are briefly discussed.

Roddy, D. J.↗

Continental land cover assessment using Landsat MSS data

A statistical procedure to assess level-II continental resources using Landsat MSS digital data is presented. The statistical procedure involves a two-stage cluster sample within a stratified random sample. The utility of this procedure is assessed by using it to estimate the areal extent of the conifer and hardwood resources of the continental U.S. National estimates of conifer and hardwood derived using this sampling procedure were within 3 percent of U.S. Forest Service (USFS) figures. According to the Landsat-based study, 11 percent of the country is conifer forest and 12 percent is hardwood. The corresponding USFS figures are 13 and 15 percent, respectively. Comparison of the MSS classification products and airphotos showed that the conifer cover class was correctly identified 74 percent of the time and hardwood 80 percent of the time. The average classification accuracy countrywide for the four cover types considered (conifer, hardwood, water, and 'other') is 74 percent, and the overall accuracy is 85 percent. The statistical procedure provides a method of incorporating Landsat MSS digital data as a second state for level-II continental resource assessment. Alternate data sources, e.g., satellite and aircraft photographic imagery, may also be used in conjunction with this statistical model.

Nelson, Ross↗

Constraints on continental accretion from sedimentation

Heat loss in the ancient Earth was discussed assuming that classical sea floor spreading was the only mechanism. This may be expressed as faster spreading or longer total ridge length. These have important implications as to the size and number of cratonic plates in the distant past, the degree to which they are flooded, the kinds of sediments and volcanics that would be expected, and the amount of recycling of continental material taking place. The higher proportion of marine sedimentary rocks and oceanic volcanics in the Archean, and the relative paucity of evaporites and continental volcanics may in part be due to smaller cratonic blocks. A model was developed of the percentage of continental flooding which utilizes round continents and a constant width of the zone of flooding. This model produces a reasonable good fit to the percentage of flooding on the present day continents.

Abbott, Dallas↗

Thermal models pertaining to continental growth

Thermal models are important to understanding continental growth as the genesis, stabilization, and possible recycling of continental crust are closely related to the tectonic processes of the earth which are driven primarily by heat. The thermal energy budget of the earth was slowly decreasing since core formation, and thus the energy driving the terrestrial tectonic engine was decreasing. This fundamental observation was used to develop a logic tree defining the options for continental growth throughout earth history.

Morgan, Paul↗

An Assessment of Ozone Photochemistry in the Extratropical Western North Pacific: Impact of Continental Outflow During the Late Winter/Early Spring

This study examines the influence of photochemical processes on tropospheric ozone distributions over the extratropical western North Pacific. The analysis presented here is based on data collected during the Pacific Exploratory Mission-West Phase B (PEM-West B) field study conducted in February-March 1994. Sampling in the study region involved altitudes of 0-12 km and latitudes of 10deg S to 50deg N. The extratropical component of the data set (i.e., 20-50deg N) was defined by markedly different photochemical environments north and south of 30deg N. This separation was clearly defined by an abrupt decrease in the tropopause height near 30deg N and a concomitant increase in total O3 column density. This shift in overhead O3 led to highly reduced rates of O3 formation and destruction for the 30-50deg N latitude regime. Both latitude ranges, however, still exhibited net O3 production at all altitudes. Of special significance was the finding that net O3 production prevailed even at boundary layer and lower free tropospheric altitudes (e.g., less than 4 km), a condition uncommon to Pacific marine environments. These results reflect the strong impact of continental Outflow of O3 precursors (e.g., NO and NMHCS) into the northwestern Pacific Basin. Comparisons with PEM-West A, which sampled the same region in a different season (September-October), revealed major differences at altitudes below 4 km, the altitude range most influenced by continental outflow. The resulting net rate of increase in the tropospheric O3 column for PEM-West B was 1-3 % per day, while for PEM-West A it was approximately zero. Unique to the PEM-West B study is the finding that even under wintertime conditions substantial column production of tropospheric O3 can occur at subtropical and mid-latitudes. While such impacts may not be totally unexpected at near coast locations, the present study suggests that the impact from continental outflow on the marine BL could extend out to distances of more than 2000 km from the Asian Pacific Rim.

Crawford, J.↗

Mapping Distant Continental Influences in the Remote Pacific Atmosphere; Simulations of CO Relevant to the Photochemistry of Oxidants

An animated sequence of maps of simulated carbon monoxide concentrations graphically portrays the extent of residual continental influence upon the tropical Pacific Ocean as studied by NASA aircraft during the PEM-Tropics B intensive sampling campaign. We used the MM5 at a 90 km resolution in a globally wrapped grid to simulate the meteorology of transport, and our GRACES model to follow the basic chemistry. The CO we simulate derives from different sources, and so we distinguish anthropogenic, natural terpenoid oxidation, biomass burning, and pervasive CH4-oxidation influences. "Influence" is always judged with an implicit timescale, and these maps describe influence on the 15-45 day timescale appropriate for CO oxidation. In consequence, the maps are useful in assessing the origins of slowly reacting compounds like acetone, methanol, and the lightest hydrocarbons. At 8 km altitude, The Eastern South Pacific to ca. 130 W (eastern Polynesia) was frequently affected by continental influences but NASA's DC-8's flight path did not happen to take it into these regions very often. Near the surface, continentally influenced air crossed into t he Western South Pacific, in the region northwest of the Southern Pacific Convergence Zone but south of the Intertropical Convergence Zone. This air originated from the NE Pacific, and partly from North America. Comparisons are made to CO and other compounds measured aboard the DC-8 and the P-3 aircraft. We will also use tracers to describe the influence of marine convection in the upper troposphere. As time allows, we will discuss the "age" of ozone within the very cleanest region sampled in portions of the near-equatorial Western South Pacific, using a simple chemical mechanism for ozone levels. These simulations describe the chemistry of an atmosphere with very low ozone.

Chatfield Robert B.↗