Search NASA⌕ Search

SEARCH · Search NASA

Results for “coproduced”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Grassland productivity responds unexpectedly to dynamic light and soil water environments induced by photovoltaic arrays

Abstract Agrivoltaic (AV) systems are designed to coproduce photovoltaic (PV) energy on lands simultaneously supporting agriculture (food/forage production). PV infrastructure in agroecosystems alters resources critical for plant growth, and water‐limited agroecosystems such as grasslands are likely to be particularly sensitive to the unique spatial and temporal patterns of incident sunlight and soil water inherent within AV systems. However, the impact of resource alteration on forage production, the primary ecosystem service from managed grasslands, is poorly resolved. Here, we evaluated seasonal patterns of soil moisture (SM) and diurnal variation in incident sunlight (photosynthetic photon flux density [PPFD]) in a single‐axis‐tracking AV system established in a formerly managed semiarid C 3 grassland in Colorado. Our goals were to (1) quantify dynamic patterns of PPFD and SM within a 1.2 MW PV array in a perennial grassland, and (2) determine how aboveground net primary production (ANPP) and photosynthetic parameters responded to the resource patterns created by the PV array. We hypothesized that spatial variability in ANPP would be strongly related to SM patterns, typical of most grasslands. We measured significant reductions in ANPP directly beneath PV panels, where SM and PPFD were both low. However, in locations with significantly increased SM from the shedding and redistribution of precipitation by PV panels, ANPP was not increased. Instead, ANPP was greatest in locations where plants were shaded in the afternoon but received high levels of PPFD in the morning hours, when air temperatures and vapor pressure deficits were relatively low. Thus, contrary to expectations, we found relatively weak relationships between SM and ANPP despite significant spatial variability in both. Further, there was little evidence that light‐saturated photosynthesis ( A sat ) and quantum yield of CO 2 assimilation (ϕCO 2 ) differed for plants growing directly beneath (lowest PPFD) versus between (highest PPFD) PV panels. Overall, the AV system established in this semiarid managed grassland did not alter patterns of ANPP in ways predictable from past studies of controls of ANPP in open grasslands. However, our results suggest that the diurnal timing of low versus high periods of PPFD incident on plants is an important determinant of productivity patterns in grasslands.

14 SOLAR ENERGY↗

Role of the ocean in climate stabilization

The ocean has absorbed over 90% of the heat from recent anthropogenic greenhouse warming. This chapter reviews a variety of ocean-related methods for slowing down and eventually halting this warming. “Blue carbon” reservoirs store more carbon than terrestrial equivalents, although are still limited compared with global negative emissions needs. Oceanic carbon uptake could be augmented via iron fertilization, although this method presents challenges. Algal-based biomass energy with carbon capture and storage (ABECCS) offers opportunities for carbon-neutral fuel alternatives as well as for negative emissions. Total carbon dioxide removal potential is estimated at 15–33 Pg CO 2 /year by mid-century and 33–95 Pg CO 2 /year by the end of the century, which could offset current and projected CO 2 emissions. ABECCS can also coproduce high-protein feed for aquaculture and reduce demand for agricultural land. Furthermore, combined with effective ocean blue carbon management and terrestrial methods, ocean-based carbon removal can play a critical role in climate stabilization.

bioenergy carbon capture and storage↗

Process design and economics for production of advanced biofuels from genetically modified lipid-producing sorghum

This study evaluates the potential for making advanced biofuels from genetically modified (GM) lipid–producing sorghum. A biodiesel coproduction process is developed to extract, purify, and upgrade lipids to diesel fuel while carbohydrates are utilized for making ethanol through acid thermal pretreatment, enzymatic hydrolysis, and fermentation. To assess the advantages of coproducing biodiesel from GM–sorghum, process economics are compared to a cellulosic ethanol biorefinery receiving non-GM sorghum. Minimum ethanol selling prices (MESP) that reach a breakeven point after 30 years of service life are calculated as an economic index to compare the two processes. Results indicate that biodiesel coproduction improves the economics by lowering the MESP from 3.08/gal for the ethanol-only process to 2.46/gal. Sensitivity analyses reveal that increasing sorghum’s lipid content, increasing the lipid extraction efficiency, and reducing the solvent-to-solids ratio in lipid extraction columns are the most important process parameters to further enhance technoeconomics. Analyses indicate that a lipid content above 13 wt% (dry basis) or a biomass price less than 65/Mg (dry basis) will result in a 2014 ethanol wholesale price of 2.25/gal for the coproduction process.

09 BIOMASS FUELS↗

A novel approach to medical radioisotope production using inverse kinematics: A successful production test of the theranostic radionuclide 67Cu

In this work we studied the production of the theranostic radionuclide 67 Cu (t 1/2 =62h) via the reaction of a 70 Zn beam at 15 MeV/nucleon with a hydrogen gas target. The 67 Cu radionuclide, alongside other coproduced isotopes, was collected after the gas target on an Al catcher foil. Radioactivity was measured by offline gamma-ray analysis. After 36h from the end of the irradiation, apart from the product of interest 67Cu, the main radioimpurity coming from the 70 Zn+p reaction was $^{69m}$Zn (t 1/2 =13.8h). Moreover, along with the radionuclide of interest produced in inverse kinematics, the production of additional radioisotopes is possible by making use of the forward-focused neutrons from the reaction and letting them interact with a secondary target. A preliminary test of this concept was realized in the present study. The main requirement to obtain activities appropriate for preclinical studies is the development of high-intensity heavy-ion primary beams.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

48 Ca(p,pn) 47 Ca linac production for the preparation of a 47 Ca/ 47 Sc generator

Here, the production of 47 Sc via the nuclear reaction 48 Ca(p,pn) 47 Ca→(β-, T 1/2 = 4.54 d) 47 Sc and the assembly of a 47 Ca/ 47 Sc generator system has been investigated at Brookhaven National Laboratory. To produce 47 Ca, a pressed nat CaCl 2 target was irradiated with a proton beam at energy on target of 27.5 MeV at Brookhaven Linac Isotope Producer. Irradiated targets were dissolved in water and then acidified with concentrated HCl before separation using extraction chromatography through a diglycolamide (DGA) resin column. After ingrowth, 47 Sc was collected at >90 % with low contamination from both nonradioactive metals and coproduced radionuclides. A total of four 47 Ca/ 47 Sc separations were performed with 6–7 days between the irradiation and the separation to allow the equilibration of the ingrowing 47 Sc.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Can we have clean energy and grow our crops too? Solar siting on agricultural land in the United States

We report a record amount of large-scale solar development is proposed and under construction in the US Midwest, much of it on agricultural land. This article contributes to the social science literature on renewable energy and public acceptance by addressing stakeholder perspectives on developing utility-scale solar power on agricultural land and complex institutional dynamics that shape these siting decisions. How do stakeholders’ interactions coproduce solar siting decisions? How are the existing complex contexts of energy and agricultural systems affecting solar siting? Who are the stakeholders involved in agricultural solar siting, and how do their epistemic paradigms about using agricultural land, especially prime farmland, differ? To answer these questions, interviews were conducted and analyzed across energy, agriculture, government, and expert stakeholder groups, focusing on Michigan, with comparison to other states. The results provide a conceptual map of stakeholder interaction related to solar development on farmland and characterize the main epistemic paradigms shaping stakeholder conflict. Issues shaping agricultural community perceptions include identity and farmland, the decisions of local farmland renters and non-operating landlords, prime versus lower quality farmland, farm financial viability, and farmland as private property or a public good. Some scientists and engineers seek to alleviate conflicts and drawbacks of agricultural land conversion for solar use by combining farming and solar energy generation: a practice called agrivoltaics. We argue that agrivoltaics are currently treated as a technological fix by not accounting for stakeholder interaction in complex policy, community, and scientific institutions. We conclude by identifying interdisciplinary research priorities to develop socially robust designs.

14 SOLAR ENERGY↗

Activating nano-bulk interplays for sustainable ammonia electrosynthesis

Small changes in a catalyst’s composition, modification, and/or integration into a reactor can have significant yet often poorly understood effects on (electro)catalysis. Here we demonstrate the careful tailoring of Ru/La 0.25 Ce 0.75 O 2-x catalysts through the post-synthesized hydrothermal treatment together with control over the Ru loadings to create hydroxyl groups and electronic restructuring for ammonia electrosynthesis. When integrated into a protonic ceramic electrolyzer, the in situ formed Ce 3+ -OH/Ru sites facilitate both the N≡N decoupling and N—H formation at 400 °C and 1 bar of N 2 , boosting the ammonia production rate (2.92 mol h -1 m -2 ) up to 100-fold higher than the current state-of-the-art electrolyzers. Moreover, such catalysts and electrolyzer design concepts can be readily tuned to more complex applications such as coproducing ammonia and other chemicals with hydrocarbons as direct hydrogen sources. Here, the creation of coordinated saturated support –OH/metal sites in the advanced electrolyzer offers an attractive approach for future clean-energy and green-chemical industries.

03 NATURAL GAS↗

Simultaneous Separation of Protactinium-230 and Uranium-230 Isotopes from a Proton-Irradiated Thorium Matrix

The use of radioisotopes in cancer therapy is becoming increasingly important. As a potential candidate for targeted alpha therapy, 230 U (t 1/2 = 20.8 d), the decay daughter of 230 Pa (t 1/2 = 17.4 d) is currently being investigated for cancer treatment. For radioisotopes to be used in biomedicine, they must be radiochemically pure and free from carrier interference. This can be challenging given their short half-life. Thus, in this study, radiological separation methods for harvesting isotopes for use in biomedicine must be simple, fast, and capable of obtaining the required purity levels. Herein, we demonstrate a new rapid method for the separation of 230 U and 230 Pa from a proton-irradiated 232 Th metal target and from coproduced fission products with high recovery and purity. A dual-column approach was used, in which the first column was an anion exchange (AX) column and the second column was a DGA column. The MP-1 AX resin was used for the primary separation of the three major components (U, Pa, and Th, as well as fission products), and the DGA column was used for further purification of the separated 230 U. The method is simple and allows for straightforward separation of U, Pa, Th, and fission products; also, the entire process from target dissolution to shipment of 230 U could be completed in 3 days with an overall 230 U recovery yield of 96 ± 3%. Additionally, separated 230 Pa fractions can be used to harvest ingrown 230 U after initial separation.

DGA resin↗

Synthesis of Supported Pd 0 Nanoparticles from a Single-Site Pd 2+ Surface Complex by Alkene Reduction

Here, a surface metal–organic complex, (-AlO x )Pd(acac) (acac = acetylacetonate), is prepared by chemically grafting the precursor Pd(acac) 2 onto γ-Al 2 O 3 in toluene at 25 °C. The resulting surface complex is characterized by inductively coupled plasma atomic emission spectroscopy (ICP-AES), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and dynamic nuclear polarization surface-enhanced solid-state nuclear magnetic resonance spectroscopy (DNP SENS). This surface complex is a precursor in the direct synthesis of size-controlled Pd nanoparticles under mild reductive conditions and in the absence of additional stabilizers or pretreatments. Indeed, upon exposure to gaseous ethylene or liquid 1-octene at 25 °C, the Pd 2+ species is reduced to form Pd 0 nanoparticles with a mean diameter of 4.3 ± 0.6 nm, as determined by scanning transmission electron microscopy (STEM). These nanoparticles are catalytically relevant using the aerobic 1-phenylethanol oxidation as a probe reaction, with rates comparable to a conventional Pd/Al 2 O 3 catalyst but without an induction period. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and temperature-programmed reaction mass spectrometry (TPR-MS) reveal that the surface complex reduction with ethylene coproduces H 2 , acetylene, and 1,3-butadiene. This process reasonably proceeds via an olefin activation/coordination/insertion pathway, followed by β-hydride elimination to generate free Pd 0 . Lastly, the well-defined nature of the single-site supported Pd 2+ precursor provides direct mechanistic insights into this unusual and likely general reductive process.

36 MATERIALS SCIENCE↗

Cost and Life-Cycle Greenhouse Gas Implications of Integrating Biogas Upgrading and Carbon Capture Technologies in Cellulosic Biorefineries

We discuss gaseous streams in biorefineries that have been undervalued and underutilized. In cellulosic biorefineries, coproduced biogas is assumed to be combusted alongside lignin to generate process heat and electricity. Biogas can instead be upgraded to compressed biomethane and used as a transportation fuel. Capturing CO 2 -rich streams generated in biorefineries can also contribute to greenhouse gas (GHG) mitigation goals. We explore the economic and life-cycle GHG impacts of biogas upgrading and CO 2 capture and storage (CCS) at ionic liquid-based cellulosic ethanol biorefineries using biomass sorghum. Without policy incentives, biorefineries with biogas upgrading systems can achieve a comparable minimum ethanol selling price (MESP) and reduced GHG footprint ($1.38/liter gasoline equivalent (LGE) and 12.9 gCO 2e /MJ) relative to facilities that combust biogas onsite ($1.34/LGE and 24.3 gCO 2e /MJ). Incorporating renewable identification number (RIN) values advantages facilities that upgrade biogas relative to other options (MESP of $0.72/LGE). Incorporating CCS increases the MESP but dramatically decreases the GHG footprint (-21.3 gCO 2e /MJ for partial, -110.7 gCO 2e /MJ for full CCS). The addition of CCS also decreases the cost of carbon mitigation to as low as $52-$78/t CO 2 , depending on the assumed fuel selling price, and is the lowest-cost option if both RIN and California's Low Carbon Fuel Standard credits are incorporated.

09 BIOMASS FUELS↗

Life-Cycle Emissions and Human Health Implications of Multi-Input, Multi-Output Biorefineries

To meaningfully broaden the supply of fuels for the transportation sector, biofuel production must be scaled up and this requires a wider array of biomass feedstocks, including agricultural residues and organic waste. Rather than pursuing conversion of lignocellulosic biomass to fuels and anaerobic digestion of wastes as separate pathways, there are economic and environmental advantages associated with integrating these processes in a single facility. However, existing research rarely goes beyond carbon footprints in quantifying the effects of such a shift in bioenergy production. In addition to CO2, CH4, and N2O, this study explores the life-cycle air pollution (NH3, volatile organic compounds, NOx, SO2, and PM2.5), marine eutrophication, acidification, and local external cost implications of biorefineries capable of taking in crop residues, food waste, and manure to produce liquid fuel, electricity, and/or other options such as renewable natural gas (RNG), hydrogen, bioplastics, and protein-rich livestock feed. Relative to a single-input, single-output baseline, biorefineries integrated with organic waste codigestion to coproduce electricity or RNG can reduce life-cycle CO2-equivalent emissions by 84-149%, and the monetized external impacts across all scenarios range from $1.07/gallon to -$0.75/gallon ethanol.

Air pollution↗

Criteria Air Pollutants and Greenhouse Gas Emissions from Hydrogen Production in U.S. Steam Methane Reforming Facilities

The global and U.S. domestic effort to develop a clean energy economy and curb environmental pollution incentivizes the use of hydrogen as a transportation fuel, owing to its zero tailpipe pollutant emissions and high fuel efficiency in fuel cell electric vehicles (FCEVs). However, the hydrogen production process is not emissions free. Conventional hydrogen production via steam methane reforming (SMR) is energy intensive, coproduces carbon dioxide, and emits air pollutants. Therefore, it is necessary to quantify the environmental impacts of SMR hydrogen production alongside the use-phase of FCEVs. This study fills the information gap, analyzing the greenhouse gas (GHG) and criteria air pollutant (CAP) emissions associated with hydrogen production in U.S. SMR facilities by compiling and matching the facility-reported GHG and CAP emissions data with facilities’ hydrogen production data. The actual amounts of hydrogen produced at U.S. SMR facilities are often confidential. Thus, we have developed four approaches to estimate the hydrogen production amounts. The resultant GHG and CAP emissions per MJ of hydrogen produced in individual facilities were aggregated to develop emission values for both a national median and a California state median. Lastly, this study also investigates the breakdown of facility emissions into combustion emissions and noncombustion emissions.

54 ENVIRONMENTAL SCIENCES↗

ZeroCAL: Eliminating Carbon Dioxide Emissions from Limestone’s Decomposition to Decarbonize Cement Production

Limestone (calcite, CaCO 3 ) is an abundant and cost-effective source of calcium oxide (CaO) for cement and lime production. However, the thermochemical decomposition of limestone (~800 °C, 1 bar) to produce lime (CaO) results in substantial carbon dioxide (CO 2(g) ) emissions and energy use, i.e., ~1 tonne [t] of CO 2 and ~1.4 MWh per t of CaO produced. Here, we describe a new pathway to use CaCO 3 as a Ca source to make hydrated lime (portlandite, Ca(OH) 2 ) at ambient conditions (p, T) while nearly eliminating process CO 2(g) emissions (as low as 1.5 mol. % of the CO 2 in the precursor CaCO 3 , equivalent to 9 kg of CO 2(g) per t of Ca(OH) 2 ) within an aqueous flowelectrolysis/ pH-swing process that coproduces hydrogen (H 2(g) ) and oxygen (O 2(g) ). Because Ca(OH) 2 is a zero-carbon precursor for cement and lime production, this approach represents a significant advancement in the production of zero-carbon cement. The Zero CArbon Lime (ZeroCAL) process includes dissolution, separation/recovery, and electrolysis stages according to the following steps: (Step 1) chelator (e.g., ethylenediaminetetraacetic acid, EDTA)-promoted dissolution of CaCO 3 and complexation of Ca 2+ under basic (>pH 9) conditions, (Step 2a) Ca enrichment and separation using nanofiltration (NF), which allows separation of the Ca-EDTA complex from the accompanying bicarbonate (HCO 3 – ) species, (Step 2b) acidity-promoted decomplexation of Ca from EDTA, which allows near-complete chelator recovery and the formation of a Ca-enriched stream, and (Step 3) rapid precipitation of Ca(OH) 2 from the Ca-enriched stream using electrolytically produced alkalinity. These reactions can be conducted in a seawater matrix yielding coproducts including hydrochloric acid (HCl) and sodium bicarbonate (NaHCO 3 ), resulting from electrolysis and limestone dissolution, respectively. Careful analysis of the reaction stoichiometries and energy balances indicates that approximately 1.35 t of CaCO 3 , 1.09 t of water, 0.79 t of sodium chloride (NaCl), and ~2 MWh of electrical energy are required to produce 1 t of Ca(OH) 2 , with significant opportunity for process intensification. This approach has major implications for decarbonizing cement production within a paradigm that emphasizes the use of existing cement plants and electrification of industrial operations, while also creating approaches for alkalinity production that enable cost-effective and scalable CO 2 mineralization via Ca(OH) 2 carbonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microbial Pathways for Cost-Effective Low-Carbon Renewable Indigoidine

Indigoidine is a bioadvantaged platform molecule with diverse applications, including use as a textile dye, biotransistor, biosolar cell, biosensor, and food coloring. There are multiple microbial hosts and carbon sources that can be used and optimized for its production, yet there is limited guidance for which options have the greatest commercial potential. Here, we consider five different host microbes and combine genome-scale metabolic models with techno-economic and lifecycle assessment models. Pseudomonas putida currently outperforms synthetic indigo production and other indigoidine-producing hosts, using glucose, xylose, and lignin-derived aromatics to produce indigoidine at a minimum selling price of $2.9/kg and a greenhouse gas (GHG) footprint of 3.5 kgCO 2e /kg. Optimizing pathways-achieving 90% of the theoretical indigoidine yield from sugars and aromatics-can reduce costs 6-7-fold and GHG emissions 3-10-fold. From a cost perspective, microbes that co-utilize aromatics are advantageous, while selecting hosts that coproduce other value-added molecules can reduce GHG emissions. System-wide improvements and the use of a low-cost, low-carbon nitrogen source are crucial for commercial viability in all cases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid Catalytic Biorefining of Hardwood Biomass to Methylated Furans and Depolymerized Technical Lignin

A robust method is needed to achieve high yield all-catalytic conversion of recalcitrant lignocellulosic biomass to transportation fuels while maximizing carbon utilization from raw substrates. In this paper, to accomplish this, we developed an integrated strategy that combines homogeneous and heterogeneous reactions with a treatment-extraction step to coproduce 2-methylfuran (MF) and 2,5-dimethylfuran (DMF) directly from hardwood poplar while maintaining high catalyst activity. In the first step, poplar wood chips were treated with dilute FeCl 3 in THF–water at subpyrolytic temperature to yield 93.5% furfural (FF) from xylan and 66.0% 5-hydroxymethylfurfural (HMF) from glucan. Concurrently, a highly pure lignin powder was obtained from the liquor by precipitation upon room temperature vacuum recovery of THF from the water. Afterward, FF and HMF were extracted from water into an organic phase consisting of toluene and 1,4-dioxane treated with Ca(OH) 2 . A second hydrodeoxygenation reaction using Cu–Ni/TiO 2 catalyst yielded 87.8% MF from FF and 85.6% DMF from HMF. Characterization of the lignin product showed its molecular weight to be reduced by an order of magnitude from its native state as well as complete removal of its native β-aryl ether linkages without hydrogen input or further heterogeneous catalytic processing. Finally, a 60% cumulative yield of MF, DMF, and lignin products from the available carbon (xylan+glucan+lignin) in poplar was achieved, rivaling more mature cellulosic ethanol strategies.

09 BIOMASS FUELS↗

Market optimization and technoeconomic analysis of hydrogen-electricity coproduction systems

Decarbonization efforts across North America, Europe, and beyond rely on variable renewable energy sources such as wind and solar, as well as alternative fuels, such as hydrogen, to support the sustainable energy transition. These advancements have prompted a need for more flexibility in the electric grid to complement non-dispatchable energy sources and increased demand from electrification. Integrated energy systems are well suited to provide this flexibility, but conventional technoeconomic modeling paradigms neglect the time-varying dynamic nature of the grid and thus undervalue resource flexibility. In this work, we develop a computational optimization framework for dynamic market-based technoeconomic comparison of integrated energy systems that coproduce low-carbon electricity and hydrogen (e.g., solid oxide fuel cells, solid oxide electrolysis) against technologies that only produce electricity (e.g., natural gas combined cycle with carbon capture) or only produce hydrogen. Our framework starts with rigorous physics-based process models, built in the open-source Institute for the Design of Advanced Energy Systems (IDAES) modeling and optimization platform, for six energy process concepts. Using these rigorous models and a workflow to optimally design each technology, the framework is shown to be capable of evaluating new and emerging technologies in varying energy markets under a plethora of future scenarios (i.e., renewables penetration, carbon tax, etc.). Ultimately, our framework finds that solid oxide fuel cell-based coproduction systems achieve positive profits for 85% of the analyzed market scenarios. From these market optimization results, we use multivariate linear regression (R 2 values up to 0.99) to determine which electricity price statistics are most significant to predict the optimized annual profit of each system. The proposed framework provides a powerful tool for directly comparing flexible, multi-product energy process concepts to help discern optimal technology and integration options.

08 HYDROGEN↗

Reanalysis of the (J=5) state at 592 keV in {sup 180}Ta and its role in the {nu}-process nucleosynthesis of {sup 180}Ta in supernovae

We analyze the production and freeze-out of the isomer {sup 180}Ta{sup m} in the {nu}-process. We consider the influence of a possible low-lying intermediate (J=5) state at 592 keV using a transition width estimated from the measured half-life. This more realistic width is much smaller than the previous estimate. We find that the 592-keV state leads only to a small reduction of the residual isomer population ratio from the previous result; that is, considering this better estimate for the transition width, the isomer population ratio changes from R=0.39 to R=0.38, whereas previously it was estimated that this transition could reduce the ratio to R=0.18. This finding strengthens the evidence that {sup 138}La and {sup 180}Ta are coproduced by neutrino nucleosynthesis with an electron neutrino temperature of kT{approx_equal}4 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗