Search NASA⌕ Search

SEARCH · Search NASA

Results for “core X-ray diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Electronic topological transitions in cadmium under pressure studied via theoretical and experimental x-ray absorption spectroscopy

Here, an electronic topological transition (ETT) in cadmium below 1 GPa is investigated in situ with experimental x-ray absorption spectroscopy and projecting calculated core-valence excitons onto the band structure. These projections are a useful application of the Bethe-Salpeter equation approach that considers many-body effects. The method described herein can be used for systems that are otherwise difficult to probe in situ; therefore, it provides a generalizable approach to identifying and understanding ETTs under high pressure. Although pressure-induced ETTs are often probed using indirect structural responses, our own x-ray diffraction and Raman studies suggest a second-order structural transition around 3 GPa but are largely insensitive to or inconclusive for the previously studied ETT in this region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic Structure, Dynamics, Changes in Chemical Bonding and Semiconductor-Metal Transition in Sb 2 Se 3 : A Remarkable Material for Quantum Networks and Energy Applications

Antimony sesquiselenide has become an outstanding functional material for photovoltaics, energy storage and transformation, memory and photonic applications. Sb 2 Se 3 is one of the most successful emerging solar light absorbers and has also been identified as a highly promising ultralow-loss phase-change material (PCM) for next-generation coherent nanophotonic processors, photonic tensor cores, quantum and neuromorphic networks. Unlike benchmark telluride PCMs, Sb 2 Se 3 features a quasi-one-dimensional (1D) crystalline structure consisting of (Sb 4 Se 6 ) ∞ ribbons, lacks the typical PCM chemical bonding, and undergoes an extended semiconductor-metal transition above the melting point. Consequently, the origin of high optical contrast between crystalline (SET) and amorphous (RESET) logic states remains elusive and presents a significant challenge. Using high-energy X-ray diffraction and Raman spectroscopy over a wide temperature range, supported by first-principles simulations and complemented by thermal, optical and electrical measurements, as well as by 121 Sb-Mossbauer spectroscopy, the quasi-1D network of orthorhombic antimony sesquiselenide was found to undergo significant evolution in amorphous and supercooled Sb 2 Se 3 , leading to lower coordination, shorter interatomic distances and a higher p-electron density on antimony, indicating changes in chemical bonding. The observed novel Sb 2 Se 3 nanocrystalline polymorph, characterized by trigonal antimony coordination and more isolated Sb-Se ribbons, could help reduce multiple trapping defect states in the bandgap, which are typical of orthorhombic Sb 2 Se 3 , thereby enhancing the power-conversion efficiency of photovoltaic devices. Semimetallic and metallic liquid Sb 2 Se 3 exhibit a gradual transformation into a denser 2D and/or 3D network with higher antimony coordination. Localized electron states in the pseudogap are becoming extended, leading to an increase in electronic conductivity σ following the relationship σ ∝ N(E F ) 2 . Liquid Sb 2 Se 3 also appears to be strongly fragile, with a nonmonotonic change in viscosity and higher atomic mobility in the metallic liquid. Furthermore, these results explain extraordinary functionalities of Sb 2 Se 3 for photonic and energy applications.

antimony↗

Evaluation of IrO 2 catalysts doped with Ti and Nb at industrially relevant electrolyzer conditions: A comprehensive study

A series of commercial Oxygen Evolution Reaction (OER) IrO 2 -based materials doped with acid-stable titanium and niobium species were comprehensively characterized by Brunauer-Emmett-Teller (BET), X-ray diffraction analysis (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) with energy dispersive spectroscopy (EDS), and X-ray Scattering. Electrocatalysts were integrated into Membrane Electrode Assembly (MEA) using a fabrication method developed under the US DOE H2NEW consortium. An electrolysis performance in a commercial setup as well as a laboratory screening system was performed at conditions relevant to industrial application. According to the comprehensive characterizations, the studied materials are closer to doped iridium oxides rather than core–shell structures. In an electrolysis cell, the IrO 2 /TiO x catalyst slightly outperforms the IrO 2 /NbO x based on the activity. It was demonstrated that the operation of electrolysis cells at elevated temperatures and the implementation of thinner Nafion-type membranes allows for substantially increased performance, which is consistent with the literature report. Finally, this work provides valuable baselines including characterization and performance for guiding future research in this direction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Evaluation of Cu@ZnO Core@Shell Nanowires for Use in the Carbon Dioxide Thermal Reduction Reaction

Copper-based core@shell nanomaterials are of interest for the catalytic hydrogenation of carbon dioxide toward value-added products. In this context, we have developed a facile, microwave-based procedure for the reliable and reproducible synthesis of Cu@ZnO core@shell nanowires. A systematic assessment of the effect of rationally varying various reaction conditions on this protocol was completed in order to better evaluate the growth process of these core–shell motifs. We determined that among different reaction parameters, it was the critical role of reaction time which enabled the quantitatively reliable growth of external shells with tunable thicknesses of up to 20 nm. As a demonstration of the material’s practical viability, catalytic testing was subsequently performed for the reverse water–gas shift reaction (CO 2 + H 2 → CO + H 2 O), with the evolution of the process followed with in situ X-ray diffraction and X-ray absorption spectroscopy in order to probe structural changes and gauge stability. These tests found the catalysts to be effective at converting CO 2 to CO, with notable stability detected in the shell layer and no observed alloying between copper and zinc. Furthermore, our studies support the idea that the Cu–ZnO and CuO x –ZnO interfaces are essential for the effective activation of CO 2 and H 2 .

36 MATERIALS SCIENCE↗

Cathode Upcycling for Direct Recycling of Lithium‐Ion Batteries Using a Precipitation Approach

With the increased production of electric vehicles to reduce carbon emissions, the lithium-ion battery market to supply those vehicles has grown dramatically. To enhance battery sustainability and circularity, direct recycling methods aim to recover intact cathode materials. However, end-of-life cathode materials are typically 15–20 years old and often have lower energy density compared to current cathode materials. To address this challenge, a rapid precipitation process is developed to boost energy density by converting low Ni-compositions, LiNi 0.33 Co 0.33 Mn 0.33 O 2 (NMC111), into higher Ni-compositions (NMC622). This process forms a Ni-rich coating on cathode particles that diffuses into the core upon high-temperature relithiation, increasing compositional homogeneity. The upcycling process leverages existing infrastructure, offering low capital cost and minimal additional chemical input. Through ex situ tomographic transmission X-ray microscopy (TXM), 3D Ni:Co elemental mixing is quantified, confirming that elemental content evens at the secondary particle level with a mean NMC622 composition upon relithiation. However, elemental gradients remain in the single crystalline primary particles. Ex situ high-resolution and in situ wide-angle X-ray diffraction reveals concurrent structural changes during the relithiation process. These findings provide key insights into the structural and chemical mechanisms of elemental diffusion to obtain further improvements of increased capacity and retention through compositional conversion of cathode materials.

Cathode Upcycling↗

Passivation‐Induced Species Dynamics and Microstructural Evolution in Solid‐State Lithium–Sulfur Cathodes

Solid-state lithium–sulfur (SSLS) batteries offer high theoretical energy density, yet their practical viability is hindered by poor sulfur utilization and limited rechargeability. At the core of this challenge lies the passivating nature of Li 2 S, which restricts ionic and electronic transport, suppresses interfacial activity, and severely impedes the reversibility of electrochemical reactions. In this study, we elucidate the mechanistic origins of these limitations by resolving how charge and discharge species form, grow, and spatially evolve within the cathode microstructure under varied current densities and electrode compositions. By resolving the species distribution at the particle scale and coupling it with Raman spectroscopy and X-ray diffraction, we demonstrate how Li 2 S formation induces localized surface passivation that progressively limits electrochemical accessibility within the cathode microstructure. Sulfur utilization is found to be strongly governed by the interplay between sulfur loading, residual porosity, and interfacial architecture. High sulfur contents result in buried, electrochemically isolated domains due to poor solid electrolyte (SE) percolation, while low sulfur contents trigger SE degradation via parasitic reactions. The resulting sulfur-porosity maps delineate the mechanistic boundaries between reversible and transport-limited regimes, offering actionable design guidance for SSLS cathodes with enhanced sulfur utilization.

electrode microstructure↗

Orbital-Selective Instabilities and Spin Fluctuations at the Verge of Superconductivity in Interlayer-Expanded Iron Selenide

Understanding electron correlation-driven instabilities and their coupling to structural phases is essential for deciphering multiorbital pairing in unconventional superconductors. We investigate Li x (C 5 H 5 N) y Fe 2 Se 2 (x ∼ 0.6; y ∼ 0.7−0.9), a tetragonal β-FeSe intercalate with a superconducting transition temperature (T c = 39 K) closely tied to an expanded Fe-layer spacing (∼11.4 Å). High-resolution synchrotron Xray diffraction and core-level absorption spectroscopy reveal subtle lattice distortions on cooling without a symmetry-breaking transition. Instead, the material exhibits negative thermal expansion (NTE) in the two-dimensional Fe network below T S ∼ 70 K, and stiffening of local Se−Fe−Se bond dynamics near T c . The spatially incoherent rearrangement of FeSe 4 tetrahedra and the site-local fluctuations, signal reduced electron correlations compared to those of parent β-FeSe (T c = 8 K). Complementary X-ray emission spectroscopy, a fast local probe of Fe 3d valence states, detects persistent local Fe spin moments below T S , unlike quenching in related systems. These findings indicate that decoupling of Fe planes leads to an electronically driven lattice instability. The latter emerges as NTE induced from weak, orbital-selective localization of in-plane Fe 3d states rather than conventional transverse vibrations. Governed by Hund’s coupling, this selectivity permits coexistence of local spin fluctuations with itinerant d-electrons critical for enhancing T c . These results suggest that intercalation-driven d-orbital differentiation moderates electron correlations, providing a pathway to optimize the superconductivity in low-dimensional quantum materials.

36 MATERIALS SCIENCE↗

Probing the Mechanism of Cadmium Sulfide Cluster Nucleation and Growth via Sequential Infiltration Synthesis

Few-atom metal chalcogenide clusters may be realized through the sequential infiltration of metal–organic precursors in polymer films. However, the underlying nucleation and growth mechanisms that allow for cluster synthesis with near atomic-scale precision are not fully resolved. The kinetics of the sequential infiltration synthesis (SIS) method that control the nucleation and growth mechanisms of primarily Cd 4 S 4 -core clusters within a poly­(4-vinylpyridine) (P4VP) matrix are probed with in situ UV–visible absorbance spectroscopy. Density functional theory (DFT) calculations that allow simulation of the optical properties of cluster fragments further reveal the thermodynamics that guide cluster growth within the P4VP matrix. Here, we conclude that a reactive capture mechanism for cluster nucleation and growth is dominant, although transient dimethyl cadmium adduction to the polymer backbone may contribute to cluster nucleation under shorter metal–organic purge process conditions. Grazing incidence X-ray diffraction (GI-XRD) and X-ray absorption spectroscopy (XAS) analyses further corroborate the cluster size and atom connectivity throughout the stepwise synthesis.

Jayaweera, Nuwanthaka P. [Argonne National Laborat↗

SEM/EBSD Characterization of Baffle-Former Bolts Designated for High Energy X-ray Microscopy Studies at the Advanced Photon Source

This report documents the microstructural and surface characterization of two high-fluence baffle-former bolts (BFBs) harvested from a commercial pressurized water reactor (PWR) after nearly four decades of service. These bolts experienced extreme conditions including high neutron fluence, elevated temperatures, corrosive primary water, and sustained mechanical loads, all of which contribute to degradation mechanisms such as irradiation-assisted stress corrosion cracking (IASCC). Using scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD), the study assessed bulk and near-surface microstructures, grain boundary characteristics, and in-service oxide layers. The results revealed significant differences between bolts exposed to 41 dpa and 29 dpa, including differences in recrystallization extent, deformation structures, and oxidation morphology. These findings establish critical baseline data for integration with advanced synchrotron-based high-energy X-ray microscopy (HEXM) and computational crystal plasticity models. Ultimately, the work supports improved mechanistic understanding and predictive capability regarding the long-term performance of reactor core internal components.

Lach, Tim [Oak Ridge National Laboratory (ORNL), O↗

Developing Lanthanide-Nitrate Cluster Chemistry toward Rare Earth Separations

Nitrate-decorated hexamers with a [Ln 6 (μ 6 -O)(μ 3 –OH) 8 ] 8+ core have been reported for nearly every lanthanide ion and are used as precursors for the assembly of functional metal–organic frameworks. Yet, few studies have examined the correlation between the solution and solid-state species, and the formation of mixed-metal clusters. Toward this end, a series of homo- and heterometal lanthanide nitrate hexamers was prepared via pH adjustment of aqueous lanthanide nitrate solutions. Examination of the homometallic europium solutions using Small Angle X-ray Scattering and nESI-MS showed that lower order complexes dominate lanthanide speciation in nitrate media. Yet, powder X-ray diffraction data of the precipitated phase confirmed the formation of [Ln 6 (μ 6 -O)(μ 3 -OH) 8 (NO 3 ) 6 (H 2 O) 12 ]·2(NO 3 )·n(H 2 O), Ln 6 , for Ln = Eu and Tb. For heterometal systems, analysis of the solid-state product by ICP–MS showed the selective incorporation of the heavier rare earths into Ln 6 . Selectivity was quantified by calculating an average separation factor, which is defined as the ratio of recovery factors of both metals. Further examination of the luminescence behavior of mixed metal [Tb 6–x Eu x (μ 6 -O)(μ 3 -OH) 8 (NO 3 ) 6 (H 2 O) 12 ]·2(NO 3 )·n(H 2 O), with x = 1.1–3.6, showed that the relative intensities of the peaks at 489 nm (terbium, 5 D 4 → 7 F 6 ) and 690 nm (europium, 5 D 0 → 7 F 4 ) trend with the percent incorporation of europium and terbium into the cluster.

anions↗

PRISMA: PARALLEL REFINEMENT AND INTEGRATION SYSTEM FOR MULTI-AZIMUTHAL ANALYSIS

The Parallel Refinement and Integration System for Multi-azimuthal Analysis (PRISMA, version 1.1.0) is a Python application for processing X-ray diffraction (XRD) image data. PRISMA wraps GSAS-II to perform azimuthally-binned peak refinement, computes per-frame strain and d-spacing from those fits, and provides three PyQt5 graphical interfaces: (1) a Recipe Builder for selecting GSAS-II control (.imctrl) files, optional mask (.immask) files or threshold-ased masking, reference and experiment image sets, peaks, zimuthal range and bin size, and an optional ceria-based auto-calibration; (2) a Batch Processor that uses Dask on local workstations and pure MPI (mpi4py.futures.MPICommExecutor) on HPC to distribute GSAS-II refinement across cores or compute nodes and write results to a 4-dimensional (peaks x frames x azimuths x measurements) Zarr dataset; and (3) a Data Analyzer that renders heatmaps of fit parameters, strain, frame-to-frame deltas, and percent-change-vs-reference, and exports user-defined subsections to CSV or Excel. The peak-refinement algorithm is deterministic. Benchmark on ALCF Crux: a 20,000-image set, single-peak fit in frame mode with 44 azimuthal bins on 128 nodes x 128 workers, 48 seconds total wall time.

Lorenzo Martin, Maria De La Cinta [Argonne Nationa↗

Single-shot measurements of shaped XUV FEL pulses with frequency-resolved optical gating

The ability to control the amplitude and phase of extreme ultraviolet (XUV) and X-ray free-electron laser (FEL) pulses can allow for the extension of optical techniques, such as multidimensional spectroscopy or coherent control, to higher photon energies, for probing and controlling core electronic transitions. However, this requires the ability to make single-shot, and complete, electric field measurements of potentially complex FEL pulses, in order to develop, and verify, pulse shaping strategies. Here, we present direct, single-shot measurements of XUV pulses generated under special operating configurations for producing specific pulse shapes from a laser-seeded XUV FEL. To do this, we built upon our past work using transient grating (TG) cross correlation frequency-resolved optical gating (FROG), where an optical reference pulse is diffracted from an XUV TG produced by a pair of interfering FEL pulses. The resulting nonlinear signal versus frequency and delay, i.e., the FROG trace, contains the electric field of the FEL pulse. The FEL pulse electric field is reconstructed from the FROG trace using a phase retrieval algorithm. Here we confirmed three different pulse shaping strategies for generating chirped, double and multiple FEL pulses by tuning the seed laser and FEL parameters and measuring the resulting shaped FEL pulses with TG XFROG. This work paves the way for generating on-demand pulse shapes with a seeded FEL by improving the characterization of FEL pulses, for transform-limited to more complex shapes.

Elverson, Francesca↗

Solute Redistribution During Aging in a Laser-Based Powder Bed Fusion-Produced Fe-18Ni-9Co-5Mo-Ti Maraging Steel

Solute distribution during the laser-based powder bed fusion of metals process is highly complex because of solidification. This study builds on a previous investigation of how solute heterogeneities across different scales influence phase distribution and aging physical phenomena in a Fe-18Ni-9Co-5Mo-Ti maraging steel (Santana et al. in Addit Manuf 104494, 2024). Previous work using energy-dispersive X-ray spectroscopy revealed heterogeneous Ni and Mo enrichment at intercellular regions. Using X-ray diffraction, 8 ± 3% retained austenite was quantified in as-built samples. Additionally, electron backscatter diffraction analysis exposed the location of retained austenite along cell boundaries. In this work, scanning transmission electron microscopy results revealed the presence of non-enriched retained austenite in the as-built condition. With increased aging temperature, Ni and Mo enrichment in austenite increased, especially at the austenite/martensite boundary. Solute diffusion was simulated in DICTRA Thermo-Calc® software to assess solute redistribution between the matrix and second phases and to comprehend whether elemental diffusion processes are interconnected. Three different scenarios were considered: (1) solute diffusion in the matrix; (2) diffusion with enriched austenite in the intercellular region; (3) diffusion with non-enriched austenite in the intercellular region. Results showed that Ni partitioning controls austenite growth and that boundary regions exhibit higher element enrichment than the core.

42 ENGINEERING↗

Effect of pressure cycling and compression rate on the bcc-hcp transition in an FeNi alloy

Here, we investigate the body-centered cubic (bcc) to hexagonal close-packed (hcp) phase transition in Fe-10wt. %Ni alloy, combining pressure cycling and fast compression with time-resolved synchrotron x-ray diffraction in a dynamic diamond anvil cell. Three pressure cycles were conducted with compression rates ranging from 0.1 to nearly 10 3 GPa/s. During the first cycle with the slowest compression, the observed orientations in the bcc and hcp phases are consistent with the Burgers mechanism, followed by c-axis rotation of the hcp phase consistent with {$10$ $\bar{1}2$} twinning. During the following cycles with fast compression at 10 2 –10 3 GPa/s, the hcp phase exhibits negligible c-axis rotation with a nearly constant c/a ratio of ∼1.61 up to ∼30 GPa, indicating suppression of plastic deformation (especially, twinning) due to sample confinement from the gasket. Notably, the onset pressure of the transition decreases with additional pressure cycling and faster compression, which normally leads to over-pressurization. This suggests that defects or shear induced from the pressure cycling reduces the transition kinetics even during fast compression. These insights into the deformation and transition behavior in an FeNi alloy under multiple dynamic loading cycles can offer guidance for future design of advanced structural alloys and improve our understanding of planetary core processes.

FeNi alloy↗

Fragile-to-strong transition in liquid As 2 S 3 under pressure: The effect of melt metallization

The well-known classification of glass-forming melts into fragile and strong liquids has several notable exceptions, including water, silica, and certain phase-change materials (PCMs). These exceptional fluid systems exhibit a fragile-to-strong transition (FST) upon cooling: a transformation from a high-temperature liquid with fast atomic dynamics, low viscosity, and low flow activation energy, to a viscous supercooled melt with high energy barriers near the glass transition temperature T g . This behavior is critically important for non-volatile memories, photonic tensor cores, reconfigurable metamaterials, and other devices, that use PCMs, enabling nanosecond-scale crystallization in the fragile regime and long data retention in the strong regime near or below T g . A significant structural transformation is expected between these two viscosity regimes, along with a semiconductor-metal (SC-M) transition upon heating, driven by high internal pressure and associated density increase. By applying high external pressure to the canonical low-conducting chalcogenide melt As 2 S 3 , we observed both the FST and the SC-M transition, occurring simultaneously within the same domain of the P, T−phase space. These findings suggest that the FST is not limited to a few exceptional liquids but is a common phenomenon, at least in systems that exhibit melt metallization within specific regions of their P, T−phase diagrams.

first-principles molecular dynamics↗

The structure of liquid carbon elucidated by in situ X-ray diffraction

Carbon has a central role in biology and organic chemistry, and its solid allotropes provide the basis of much of our modern technology. However, the liquid form of carbon remains nearly uncharted, and the structure of liquid carbon and most of its physical properties are essentially unknown. But liquid carbon is relevant for modelling planetary interiors and the atmospheres of white dwarfs, as an intermediate state for the synthesis of advanced carbon materials, inertial confinement fusion implosions, hypervelocity impact events on carbon materials and our general understanding of structured fluids at extreme conditions. Here we present a precise structure measurement of liquid carbon at pressures of around 1 million atmospheres obtained by in situ X-ray diffraction at an X-ray free-electron laser. Our results show a complex fluid with transient bonding and approximately four nearest neighbours on average, in agreement with quantum molecular dynamics simulations. The obtained data substantiate the understanding of the liquid state of one of the most abundant elements in the universe and can test models of the melting line. The demonstrated experimental abilities open the path to performing similar studies of the structure of liquids composed of light elements at extreme conditions.

74 ATOMIC AND MOLECULAR PHYSICS↗

The Surface Chemistry of Methanol on Cu 3 Pd(111): Effects of Metal Alloying and Reaction with Hydrogen

Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the adsorption and surface chemistry of methanol on a Cu 3 Pd(111) model surface. The composition and morphological properties of the pristine Cu 3 Pd(111) substrate were analyzed using a combination of low-energy electron diffraction (LEED), scanning tunneling microscopy (STM), and low-energy ion scattering (LEIS). The results of ion scattering showed segregation of Pd toward the surface, with a Pd/Cu ratio close to 0.5, a larger value than the ratio of 0.33 expected for a Cu 3 Pd bimetallic structure. The surface of the alloy exhibited a good LEED pattern with three-fold long-range periodicities. In STM, clusters of palladium with hexagonal arrays and Pd- Pd distances of 2.7-2.8 Å were detected. Bonding to copper perturbed the electronic properties of the atoms in the Pd clusters, shifting their 4d states toward higher binding energy with respect to the Fermi level. Further, the valence band spectrum of Cu 3 Pd(111) exhibited a line shape that was very different from those displayed by Cu(111) or Pd(111). At low pressures, the adsorption of methanol on Cu 3 Pd(111) at 300 K mainly produced CH 3 O, CO and CH x species. AP-XPS showed that most Pd atoms in the surface of the Cu 3 Pd(111) alloy interacted with the decomposition products of methanol. No significant changes were observed in the core levels of copper upon the adsorption and dissociation of methanol, suggesting that the molecule mainly interacted with Pd sites of the alloy. Reaction with hydrogen led to fast removal of CH x , C and PdC x species from Cu 3 Pd(111) at moderate (< 450 K) temperatures and prevented a CH x → C transformation. If the stability of adsorbed CH 3 O is used as a descriptor for the hydrogenation of CO 2 to methanol, Cu 3 Pd should be a much better catalyst than monometallic palladium. This may be a consequence of electronic and ensemble effects in the alloy that moderate the reactivity of Pd sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First use of an InSb crystal for x-ray imaging spectroscopy of highly ionized tungsten in the Wendelstein 7-X stellarator

Advances in time and space resolved measurements of highly charged states of tungsten (W) through x-ray imaging spectroscopy have enabled investigation of impurity transport in the Wendelstein 7-X (W7-X) stellarator. The high-resolution x-ray imaging spectrometer (HR-XIS) system on W7-X utilizes the Bragg diffraction properties of a set of multiple crystals to measure a range of impurity emission lines within sections of the 1–7 Å wavelength range, including transitions of W. A new indium–antimonide crystal has been installed on the HR-XIS system to allow viewing of the 5.5–6.2 Å region focusing on emissions of W. Consequently, many bright W emission lines from W 40+ to W 47+ were observed in this wavelength range, both in plasmas with injected W and in those with only intrinsic W impurity sources, showing the high sensitivity of the diagnostic. Three W 46+ emissions correspond in wavelength and intensity with calculated photon emissivity coefficients and can be exploited for W transport and concentration applications in plasmas with T e ≳ 2.1 keV. Here, an estimate of the core W density behavior in two separate turbulence-reduced ‘high-performance’ (HP) discharges on W7-X is done using the 5.6893 Å W 46+ line. The n W behavior in HP scenarios can be explained by previous experimental results and neoclassical predictions.

XICS↗