Search NASA⌕ Search

SEARCH · Search NASA

Results for “coronal mass ejections (CMEs)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Observations of CMEs and Models of the Eruptive Corona

It is now realized that coronal mass ejections (CMEs) are the most energetic phenomenon in the heliosphere. Although early observations (in the 1970s and 19805) revealed most of the properties of CMEs, it is the extended and uniform data set from the Solar and Heliospheric Observatory (SOHO) mission that helped us consolidate our knowledge on CMEs. The Solar Terrestrial Relations Observatory (STEREO) mission has provided direct confirmation of the three-dimensional structure of CMEs. The broadside view provided by the STEREO coronagraphs helped us estimate the width of the halo CMEs and hence validate CME cone models. Current theoretical ideas on the internal structure of CMEs suggest that a flux rope is central to the CME structure, which has considerable observational support both from remote-sensing and in-situ observations. The flux-rope nature is also consistent with the post-eruption arcades with high-temperature plasma and the charge states observed within CMEs arriving at Earth. The quadrature observations also helped us understand the relation between the radial and expansion speeds of CMEs, which were only known from empirical relations in the past. This paper highlights some of these results obtained during solar cycle 23 and 24 and discusses implications for CME models.

Gopalswamy, Nat↗
NASA NTRS2015

Dynamics of CMEs in the LASCO Field of View

A large set (16000) of coronal mass ejections (CMEs) observed during 1996-2011 was selected to study their dynamics in the LASCO field of view (LFOV). These events were selected based on the criterion that at least three height-time measurements were available for each CME. The height-time measurements included in the SOHO/LASCO catalog were used to determine velocities and accelerations of the respective CMEs at successive distances from the Sun. Next, these parameters were sorted into 30 subsamples depending on the distance from the Sun at which they were determined. The mean velocities and accelerations calculated for the successive distance-dependent subsamples of CMEs were used to study their dynamics. We demonstrate that CMEs in the LFOV manifest three distinct phases of propagation: (i) The propelling Lorentz force dominates the dynamics of CMEs in the inner (C2 LASCO) FOV, (ii) a stable propagation occurs as a result of the balance between the propelling and drag forces, (iii) the drag force dominates at the outer edge of the LFOV. When we considered different categories of CME separately, we found different acceleration distance profiles for different categories.

Michalek, G.↗
NASA NTRS2017

Global Energetics of Solar Flares and CMEs: V. Energy Closure

In this study we synthesize the results of four previous studies on the global energetics of solar flares and associated coronal mass ejections (CMEs), which include magnetic, thermal, nonthermal, and CME energies in 399 solar M and X-class flare events observed during the first 3.5 years of the Solar Dynamics Observatory (SDO) mission. Our findings are: (1) The sum of the mean nonthermal energy of flare-accelerated particles (E(sub nt)), the energy of direct heating (E(sub dir)), and the energy in coronal mass ejections (E(sub CME)), which are the primary energy dissipation processes in a flare, is found to have a ratio of (E(sub nt)+E(sub dir)+E(sub CME))/E(sub mag) = 0.87±0.18, compared with the dissipated magnetic free energy E(sub mag), which confirms energy closure within the measurement uncertainties and corroborates the magnetic origin of flares and CMEs; (2) The energy partition of the dissipated magnetic free energy is: 0.51±0.17 in nonthermal energy of ≥ 6 keV electrons, 0.17± 0.17 in nonthermal ≥ 1 MeV ions, 0.07 ± 0.14 in CMEs, and 0.07 ± 0.17 in direct heating; (3) The thermal energy is almost always less than the nonthermal energy, which is consistent with the thick-target model; (4) The bolometric luminosity in white-light flares is comparable with the thermal energy in soft X-rays (SXR); (5) Solar Energetic Particle (SEP) events carry a fraction ≈ 0.03 of the CME energy, which is consistent with CME-driven shock acceleration; and (6) The warm-target model predicts a lower limit of the low-energy cutoff at e(sub c) ≈ 6 keV, based on the mean differential emission measure (DEM) peak temperature of T(sub e) = 8.6 MK during flares. This work represents the first statistical study that establishes energy closure in solar flare/CME events.

Solar activity↗
NASA NTRS2007

The Central Role of Tether-Cutting Reconnection in the Production of CMEs

This viewgraph presentation describes tether-cutting reconnection in the production of Coronal Mass Ejections (CMEs). The topics include: 1) Birth and Release of the CME Plasmoid; 2) Resulting CME in Outer Corona; 3) Governing Role of Surrounding Field; 4) Testable Prediction of the Standard Scenario Magnetic Bubble CME Model; 5) Lateral Pressure in Outer Corona; 6) Measured Angular Widths of 3 CMEs; 7) LASCO Image of each CME at Final Width; 8) Source of the CME of 2002 May 20; 9) Source of the CME of 1999 Feb 9; 10) Source of the CME of 2003 Nov 4; and 11) Test Results.

Moore, Ron↗
NASA NTRS2014

Speed of CMEs and the Magnetic Non-Potentiality of Their Source ARs

Most fast coronal mass ejections (CMEs) originate from solar active regions (ARs). Non-potentiality of ARs is expected to determine the speed and size of CMEs in the outer corona. Several other unexplored parameters might be important as well. To find out the correlation between the initial speed of CMEs and the non-potentiality of source ARs, we associated over a hundred of CMEs with source ARs via their co-produced flares. The speed of the CMEs are collected from the SOHO LASCO CME catalog. We have used vector magnetograms obtained mainly with HMI/SDO, also with Hinode (SOT/SP) when available within an hour of a CME occurrence, to evaluate various magnetic non-potentiality parameters, e.g. magnetic free-energy proxies, computed magnetic free energy, twist, shear angle, signed shear angle etc. We have also included several other parameters e.g. total unsigned flux, net current, magnetic area of ARs, area of sunspots, to investigate their correlation, if any, with the initial speeds of CMEs. Our preliminary results show that the ARs with larger non-potentiality and area mostly produce fast CMEs but they can also produce slower ones. The ARs with lesser non-potentiality and area generally produce only slower CMEs, however, there are a few exceptions. The total unsigned flux correlate with the non-potentiality parameters and area of ARs but some ARs with large unsigned flux are also found to be least non-potential. A more detailed analysis is underway.

Tiwari, Sanjiv K.↗
NASA NTRS2021

Modeling Interplanetary Expansion and Deformation of CMEs with ANTEATR-PARADE II: Sensitivity to Input Parameters

Space weather predictions related to coronal mass ejections (CMEs) requires understanding how a CME is initiated and how its properties change as it propagates. While some parameters can be measured relatively easily near the Sun, others are much harder to disentangle from projected coronagraph images. Most predictions have been limited to the arrival time of a CME and include little to no information about the CME's internal properties. ANTEATR-PARADE represents the most thorough description of the interplanetary evolution of CMEs in a highly computationally-efficient model. (Kay & Nieves-Chinchilla, 2020) presents the derivation of this model, where we have added an elliptical cross section to the original arrival time model ANTEATR and introduced internal magnetic forces that, combined with the drag, can alter the shape of the central axis and cross section. ANTEATR-PARADE results include the transit time of CMEs, as well as the shape and size, propagation and expansion velocities, density, and magnetic field properties upon impact. We determine the dependence of each output on each of the ANTEATR-PARADE input parameters. For a fast CME, we see that the transit time and propagation velocity depend most strongly on inputs that modify the drag force whereas the inputs affecting the magnetic forces determine the expansion of the CME. We extend to other CMEs and _nd that the sensitivities change with CME scale. Magnetic forces become more important for an average CME whereas the drag force becomes more important for an extreme CME.

Coronal mass ejections↗
NASA NTRS2014

Speed of CMEs and the Magnetic Non-Potentiality of their Source Active Regions

Most fast coronal mass ejections (CMEs) originate from solar active regions (ARs). Non-potentiality of ARs plausibly determines the speed of CMEs in the outer corona. Several other unexplored parameters might be important as well. To find out the relation between the intial speed of CMEs and the non-potentiality of source ARs, we identified over a hundred of CMEs with source ARs via their co-produced flares. The speed of the CMEs are collected from the SOHO LASCO CME catalog. We have used vector magnetograms obtained with HMI/SDO, to evaluate various magnetic non-potentiality parameters, e.g. magnetic free-energy proxies, twist, shear angle, signed shear angle, net current etc. We have also included several other parameters e.g. total unsigned flux, magnetic area of ARs, area of sunspots, to investigate their correlation, if any, with the initial speeds of CMEs. Our preliminary results show that the ARs with larger non-potentiality and area produce faster CMEs but they can also produce slow ones. The ARs with lesser non-potentiality and area generally produce only slower CMEs.

sunspots↗
NASA NTRS1995

The initiation of coronal mass ejections by newly emerging magnetic flux

We present observational evidence that eruptions of quiescent filaments and associated coronal mass ejections (CMEs) occur as a consequence of the destabilization of large-scale coronal arcades due to interactions between these structures and new and growing active regions. Both statistical and case studies have been carried out. In a case study of a 'bulge' observed by the High-Altitude Observatory Solar Maximum Mission coronagraph, the high-resolution magnetograms from the Big Bear Solar Observatory show newly emerging and rapidly changing flux in the magnetic fields that apparently underlie the bugle. For other case studies and in the statistical work the eruption of major quiescent filaments was taken as a proxy for CME eruption. We have found that two thirds of the quiescent-filament-associated CMEs occurred after substantial amounts of new magnetic flux emerged in the vicinity of the filament. In addition, in a study of all major quiescent filaments and active regions appearing in a 2-month period we found that 17 of the 22 filaments that were associated with new active regions erupted and 26 of the 31 filaments that were not associated with new flux did not erupt. In all cases in which the new flux was oriented favorably for reconnection with the preexisting large-scale coronal arcades; the filament was observed to erupt. The appearance of the new flux in the form of new active regions begins a few days before the eruption and typically is still occurring at the time of the eruption. A CME initiation scenario taking account of these observational results is proposed.

Feynman, J.↗
NASA NTRS2007

New Evidence that CMEs are Self-Propelled Magnetic Bubbles

We briefly describe the "standard model" for the production of coronal mass ejections (CMEs), and our view of how it works. We then summarize pertinent recent results that we have found from SOHO observations of CMEs and the flares at the sources of these magnetic explosions. These results support our interpretation of the standard model: a CME is basically a self-propelled magnetic bubble, a low-beta plasmoitl, that (1) is built and unleashed by the tether-cutting reconnection that builds and heats the coronal flare arcade, (2) can explode from a flare site that is far from centered under the full-blown CME in the outer corona, and (3) drives itself out into the solar wind by pushing on the surrounding coronal magnetic field.

Moore, Ronald L.↗
NASA NTRS1986

Do we understand coronal mass ejections yet?

Though many more coronal mass ejections (CMEs) were observed, and though much more has been learned about them during the Solar Maximum Analysis period, they are not yet fully understood. A few recent observational results are reviewed; conclusions and implications drawn from these observations are presented. An emerging picture of the magnetic character of CMEs is sketched; the variations of CMEs' frequency and latitudes over most of a solar cycle are shown. A strong caution about the present lack of concensus on the definition of CMEs is illustrated with examples of the consequences of using different definitions. Finally, some remaining questions about coronal mass ejections are posed.

Hildner, Ernest↗
NASA NTRS2001

Material Outflows from Coronal Intensity "Dimming Regions" during Coronal Mass Ejection Onset

One signature of expulsion of coronal mass ejections (CMEs) from the solar corona is the appearance of transient intensity dimmings in coronal images. These dimmings have generally been assumed to be due to discharge of CME material from the corona, and thus the 'dimming regions' are thought of as an important signature of the sources of CMEs. We present spectral observations of two dimming regions at the time of expulsion of CMEs, using the Coronal Diagnostic Spectrometer (CDS) on the SOHO satellite. One of the dimming regions is at the solar limb and associated with a CME traveling in the plane of the sky, while the other region is on the solar disk and associated with an Earth-directed 'halo' CME. From the limb event, we see Doppler signatures of approximately 30 km/s in coronal (Fe XVI and Mg IX) emission lines, where the enhanced velocities coincide with the locations of coronal dimming. This provides direct evidence that the dimmings are associated with outflowing material. We also see larger (approximately 100 km/s) Doppler velocities in transition region (O V and He I) emission lines, which are likely to be associated with motions of a prominence and loops at transition region temperatures. An 'EIT wave' accompanies the disk event, and a dimming region behind the wave shows strong blueshifted Doppler signatures of approximately 100 km/s in O V, suggesting that material from the dimming regions behind the wave may be feeding the CME.

Harra, Louise K.↗
NASA NTRS2001

Material Outflows from Coronal Intensity "Dimming Regions" During Coronal Mass Ejection Onset

One signature of expulsion of coronal mass ejections (CMEs) from the solar corona is the appearance of transient intensity dimmings in coronal images. These dimmings have generally been assumed to be due to discharge of CME material from the corona, and thus the "dimming regions" are thought of as an important signature of the sources of CMEs. We present spectral observations of two dimming regions at the time of expulsion of CMEs, using the Coronal Diagnostic Spectrometer (CDS) on the SOHO satellite. One of the dimming regions is at the solar limb and associated with a CME traveling in the plane of the sky, while the other region is on the solar disk and associated with an Earth-directed "halo" CME. From the limb event, we see Doppler signatures of approximately equal to 30 kilometers per second in coronal (Fe XVI and Mg Ix) emission lines, where the enhanced velocities coincide with the locations of coronal dimming. This provides direct evidence that the dimmings are associated with outflowing material. We also see larger (approximately equal to 100 kilometers per second). Doppler velocities in transition region (0 v and He I) emission lines, which are likely to be associated with motions of a prominence and loops at transition region temperatures. An "EIT wave" accompanies the disk event, and a dimming region behind the wave shows strong blue-shifted Doppler signatures of approximately equal to 100 kilometers per second in 0 v, suggesting that material from the dimming regions behind the wave may be feeding the CME.

Harra, Louise K.↗
NASA NTRS2022

CMEs and SEPs During November–December 2020: A Challenge for Real-Time Space Weather Forecasting

Predictions of coronal mass ejections (CMEs) and solar energetic particles (SEPs) are a central issue in space weather forecasting. In recent years, interest in space weather predictions has expanded to include impacts at other planets beyond Earth as well as spacecraft scattered throughout the heliosphere. In this sense, the scope of space weather science now encompasses the whole heliospheric system, and multipoint measurements of solar transients can provide useful insights and validations for prediction models. In this work, we aim to analyze the whole inner heliospheric context between two eruptive flares that took place in late 2020, that is, the M4.4 flare of 29 November and the C7.4 flare of 7 December. This period is especially interesting because the STEREO-A spacecraft was located ∼60° east of the Sun–Earth line, giving us the opportunity to test the capabilities of “predictions at 360°” using remote-sensing observations from the Lagrange L1 and L5 points as input. We simulate the CMEs that were ejected during our period of interest and the SEPs accelerated by their shocks using the WSA–Enlil–SEPMOD modeling chain and four sets of input parameters, forming a “mini-ensemble.” We validate our results using in situ observations at six locations, including Earth and Mars. We find that, despite some limitations arising from the models' architecture and assumptions, CMEs and shock-accelerated SEPs can be reasonably studied and forecast in real time at least out to several tens of degrees away from the eruption site using the prediction tools employed here.

Coronal mass ejections↗
NASA NTRS1997

Remote radio tracking of interplanetary CMEs

Two examples of type 2 radio emissions associated with the propagation of earth-directed coronal mass ejections (CMEs) through the interplanetary medium are illustrated and compared. The two type 2 radio events were observed by WIND/WAVES in January and May of 1997 and exhibit very different radio characteristics. The analyses presented here use the novel approach of presenting the radio data as a function of the inverse of the frequency and time, which facilitates remote radio tracking of the CME through the interplanetary medium. It is demonstrated unequivocally that for the May 1997 event, the radio emissions were generated at the fundamental, and harmonic of the plasma frequency in the ambient plasma upstream of the CME-driven shock. For the January 1997 event, evidence is presented that some of the radio emissions were generated while the CME-driven shock passed through a corotating interaction region (CIR). This is the first time that type 2 radio emissions were shown to originate in a specific interplanetary structure.

Reiner, M. J.↗
NASA NTRS1998

Report on New Mission Concept Study: Stereo X-Ray Corona Imager Mission

Studies of the three-dimensional structure and dynamics of the solar corona have been severely limited by the constraint of single viewpoint observations. The Stereo X-Ray Coronal Imager (SXCI) mission will send a single instrument, an X-ray telescope, into deep space expressly to record stereoscopic images of the solar corona. The SXCI spacecraft will be inserted into a approximately 1 AU heliocentric orbit leading Earth by approximately 25 deg at the end of nine months. The SXCI X-ray telescope forms one element of a stereo pair, the second element being an identical X-ray telescope in Earth orbit placed there as part of the NOAA GOES program. X-ray emission is a powerful diagnostic of the corona and its magnetic fields, and three dimensional information on the coronal magnetic structure would be obtained by combining the data from the two X-ray telescopes. This information can be used to address the major solar physics questions of (1) what causes explosive coronal events such as coronal mass ejections (CMEs), eruptive flares and prominence eruptions and (2) what causes the transient heating of coronal loops. Stereoscopic views of the optically thin corona will resolve some ambiguities inherent in single line-of-sight observations. Triangulation gives 3D solar coordinates of features which can be seen in the simultaneous images from both telescopes. As part of this study, tools were developed for determining the 3D geometry of coronal features using triangulation. Advanced technologies for visualization and analysis of stereo images were tested. Results of mission and spacecraft studies are also reported.

Liewer, Paulett C.↗
NASA NTRS2013

Forecasting Propagation and Evolution of CMEs in an Operational Setting: What Has Been Learned

One of the major types of solar eruption, coronal mass ejections (CMEs) not only impact space weather, but also can have significant societal consequences. CMEs cause intense geomagnetic storms and drive fast mode shocks that accelerate charged particles, potentially resulting in enhanced radiation levels both in ions and electrons. Human and technological assets in space can be endangered as a result. CMEs are also the major contributor to generating large amplitude Geomagnetically Induced Currents (GICs), which are a source of concern for power grid safety. Due to their space weather significance, forecasting the evolution and impacts of CMEs has become a much desired capability for space weather operations worldwide. Based on our operational experience at Space Weather Research Center at NASA Goddard Space Flight Center (http://swrc.gsfc.nasa.gov), we present here some of the insights gained about accurately predicting CME impacts, particularly in relation to space weather operations. These include: 1. The need to maximize information to get an accurate handle of three-dimensional (3-D) CME kinetic parameters and therefore improve CME forecast; 2. The potential use of CME simulation results for qualitative prediction of regions of space where solar energetic particles (SEPs) may be found; 3. The need to include all CMEs occurring within a ~24 h period for a better representation of the CME interactions; 4. Various other important parameters in forecasting CME evolution in interplanetary space, with special emphasis on the CME propagation direction. It is noted that a future direction for our CME forecasting is to employ the ensemble modeling approach.

forecasting↗
NASA NTRS2002

Trajectories of Microwave Prominence Eruptions

On the basis of 17 GHz microwave images from the Nobeyama Radioheliograph near solar maximum (1999-2000), we examined trajectories of 50 prominence eruptions in order to address how prominence motions affect or reflect the surrounding coronal structures. We marked the heliocentric latitude of the top of the moving prominences on the white-light synoptic maps, which were constructed at 2.5-4.5 solar radii from the LASCO C2 coronagraph on the SOHO spacecraft. We found that i) 92% of the prominence eruptions were associated with coronal mass ejections (CMEs) and that the remaining 8% show weak mass motions confined to nearby streamers, and ii) coronal mass motions involving prominence eruptions and CMEs are not random but are organized by bundles of streamers. Our findings support the idea of multiple plasma sheets emanating from active regions, arcades, trans-equatorial interconnecting loops, and polar crown filaments, through which coronal mass is transported toward interplanetary space. This study suggests that microwave observations can provide useful information on the activity at the base of such "coronal mass corridors".

Hori, K.↗