Search NASA⌕ Search

SEARCH · Search NASA

Results for “crop residue”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Reductive catalytic fractionation of agricultural residue and energy crop lignin and application of lignin oil as antimicrobials

Cheap and abundant waste from bioethanol and agricultural processing industries are an alluring alternative feedstock for biorefineries. In this work, we employ reductive catalytic fractionation (RCF) to depolymerize, over Ru/C powder and Ru/Al 2 O 3 pellets, five herbaceous biomass feedstocks, namely corn stover, miscanthus, switchgrass, sugarcane bagasse, and wheat straw into phenolic monomers with high yields (~40 wt.% based on total (Klason + acid soluble) lignin and > 50 wt.% when stabilized using aldehydes), leaving behind a carbohydrate pulp residue. Interestingly, a polar solvent is sufficient to solubilize and fragment the lignin polymer into monomers without any catalyst. Here, contrary to woody biomass, where the monomer yields are positively correlated with the S-content of lignin, principal component analysis indicates that the monomer yields from herbaceous biomass depend on the content of lignin crosslinker – ferulate. Using NMR, we further identify α – 6 C-C linked oligomers formed from condensation reactions, explaining the unexpected low monomer yields of high β-O-4 herbaceous biomass. Recyclability experiments indicate that catalyst deactivation occurs through sintering, leaching, and fouling. Lignin oil from herbaceous biomass exhibits bacteriostatic effects against Staphylococcus aureus, highlighting a potential application in functional food development and as food or feed preservative.

09 BIOMASS FUELS↗
DOE OSTI2020

Assessment of the feedstock supply for siting single- and multiple-feedstock biorefineries in the USA and identification of prevalent feedstocks

An integrated multi-feedstock bioenergy (i.e., biofuel, biopower, or bioproduct) supply system has potential to reduce biomass supply system uncertainties and costs. This study identifies optimal configurations of multi-feedstock biomass-to-biorefinery supply chains and pertinent feedstock combinations based on spatial distribution of feedstock and lowest delivered cost to the biorefinery. We used the Supply Characterization Model (SCM) to allocate feedstock supplies to candidate biorefinery facilities. Model runs were performed for herbaceous energy crops, agriculture residue, and woody biomass available in 2017, 2022, 2025, and 2030 as estimated by the Policy Analysis System (POLYSYS) and Forest Sustainable and Economic Analysis Model (ForSEAM) models. Three feedstock supply scenarios were compared: (a) an herbaceous scenario: switchgrass, miscanthus, biosorghum, and corn stover; (b) a woody scenario: coppice wood, noncoppice wood, whole trees, and forestry residues, and (c) a mixed scenario: a combination of all feedstocks in herbaceous and woody scenarios. By 2030 the analyses predicted that 323, 168, and 473 biorefineries were sited in the herbaceous, woody, and mixed scenario, respectively, in the conterminous USA. Feedstock mixes supplied to the biorefineries were mostly dominated by a single feedstock. The most prominent feedstock mixes identified were: (1) switchgrass and miscanthus; (2) coppice and noncoppice wood; and (3) coppice wood, noncoppice wood, switchgrass and miscanthus. Biorefineries using multi-feedstock would be beneficial for growth of bioeconomy, however flexible and cost-effective conversion platforms should be developed to efficiently utilize multiple feedstocks. This analysis identifies biorefinery locations and feedstock supply mixes while minimizing delivered feedstock costs based on spatial and temporal feedstock availability.

09 BIOMASS FUELS↗
DOE OSTI2022

Anticorrosive epoxy coatings from direct epoxidation of bioethanol fractionated lignin

The development of lignin-based anticorrosive epoxy coatings for steel protection is beneficial for both alleviating the fossil resource depletion and value-added utilization of lignin but remains a challenge due to the inherent heterogeneous structure of lignin. Here, in this study, we selectively extract the low molecular weight (MW) fraction of a crop residue-derived enzymatic hydrolysis lignin (EHL) through a bioethanol fractionation process and prepare epoxy resin by direct epoxidation of the bioethanol fractionated lignin (BFL). The coatings are then fabricated using 20–100 wt% of BFL-based epoxy resin (LEp) as the commercial epoxy resin substitute. The low MW and high p-hydroxyphenyl content of the BFL offer high solubility and good workability for BFL and LEp during epoxidation and coating production, respectively. Lignin-based coatings with 20–40 wt% LEp exhibit good adhesion property (5B) and superior corrosion resistance, compared to the commercial epoxy coating. Although coating with high LEp concentrations (i.e., 60–100 wt%) resulted in decreased adhesion strength, the coating with 100 wt% LEp still displayed corrosion protection performance comparable to that of the commercial epoxy coating. Overall, this study provides a simple and effective approach to converting lignin to epoxy resins for a wide variety of surface coating applications.

09 BIOMASS FUELS↗
DOE OSTI2020

Corn stover harvest reduces soil CO 2 fluxes but increases overall C losses

Abstract Harvesting corn ( Zea mays L.) stover for use as bioenergy feedstock may provide short‐term economic benefits and perhaps improve grain yield in continuous corn systems, but excessive stover removal may lead to long‐term depletion of soil C stocks. To better quantify the impacts of stover harvest on the soil C balance, we investigated CO 2 fluxes under three harvest treatments (none, moderate, and high) in three continuous corn systems: (a) no tillage and no biochar applications, (b) chisel plowing with biochar amendments, and (c) chisel plowing without biochar amendments were quantified. We sampled static chambers 14, 13, and 15 times in 2010, 2011, and 2012, respectively, and the measurements were used to calibrate the Agricultural Production Systems sIMulator model. Although CO 2 ‐C emissions did not differ among the three systems, both moderate (approximately 30%) and high (approximately 60%) stover removal rates reduced simulated CO 2 ‐C emissions by nearly 10% and more than 22%, respectively. Despite these reductions in CO 2 flux, the sum of CO 2 ‐C and stover C exceeded CO 2 ‐C losses in those plots without stover removal. This finding suggested soil C depletion was occurring for the soil and crop management practices used, even though depletion was not evident after 3 years. Application of biochar increased soil C levels, suggesting it may be able to offset some C losses. We conclude that for sustainable, highly productive agroecosystems that include stover harvest, all agronomic practices must be optimized to minimize C losses and maintain soil quality.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Biomass Resources and Emission Reduction Potential of Agricultural and Livestock Residues in Mainland China from 2013 to 2022

Controlling carbon emissions is a global goal, and China is actively implementing carbon reduction measures. As a major agricultural nation, China has considerable potential for developing agricultural residues as renewable and environmentally friendly biomass energy. In this study, we obtained data on crop yields, crop-to-grain ratios, and livestock excretion coefficients to calculate the biomass resources of agricultural and livestock residues in Chinese provinces from 2013 to 2022. Crop residue biomass resources showed a distribution pattern with higher levels in the north than in the south and the east than in the west. Henan and Heilongjiang provinces consistently had the highest resource levels, exceeding 35 million tons annually for 10 years. The biomass resources from livestock residues were relatively abundant in Sichuan, Henan, Yunnan, Shandong, Hunan, and Inner Mongolia. Inner Mongolia, Sichuan, Shandong, and Henan had the greatest potential for CO2 emission reductions, primarily located in regions abundant in biomass resources and with high traditional energy consumption levels. ArcGIS was used to apply natural break classification to categorize the potential for emission reductions from agricultural and livestock residues across China from 2013 to 2022 into five classes. Based on factors such as crop planting area and livestock numbers, the spatiotemporal distribution of factors influencing the quantity of biomass resources was examined using Geographically and Temporally Weighted Regression. A tailored and integrated approach should be used for biomass, and the development of biomass energy should be promoted through policy support and technological innovation.

Environmental Sciences & Ecology↗
DOE OSTI2024

Lignin molecular weights of Populus trichocarpa residues after CELF pretreatment

Here we present a dataset of molecular weights of lignin from a woody energy crop (Populus trichocarpa) residues after a series of co-solvent enhanced lignocellulosic fractionation (CELF) pretreatment. The natural poplar variant GW-9947 from the Center for Bioenergy Innovation (CBI) was used. The poplar was knife milled and passed through a 1 mm sieve and CELF pretreatment was performed in a Parr autoclave reactor with 7.5 wt % solids loading, 0.5 wt% H2SO4 as catalyst at 150°C with various time. Tetrahydrofuran was added in a 1:1 mass ratio with water as the pretreatment solvent. Lignin was isolated from the pretreated samples after ball-milling in a porcelain jar with ceramic balls via Retsch PM 200 at 580 rpm for 2.5 h followed by enzymatic hydrolysis in acetate buffer (pH 4.8, 50 °C) for 48 h. The solid residue was isolated by centrifugation and hydrolyzed again with freshly added buffer and enzymes for another 48 h. After filtration, the solid residue was extracted twice with 96% (v/v) 1,4-dioxane/water mixture at room temperature overnight. The extracts were combined, rotary evaporated, and freeze-dried to recover lignin. The lignin samples were then derivatized in an acetic anhydride/pyridine (1:1, v/v) mixture and stirred at room temperature for 24 h. Ethanol was added to the reaction mixture, left for 30 min and then removed with a rotary evaporator. The addition and removal of ethanol was repeated at least 3 times until all traces of acetic acid were removed. Acetylated lignin samples were then dissolved in tetrahydrofuran (THF) at a concentration of 1.0 mg/mL. The molecular weight of acetylated lignin was measured by a gel permeation chromatography (GPC) on a PSS-Polymer Standards Service (Warwick, RI, USA) GPC SECurity 1200 system featuring Agilent HPLC 1200 components equipped with four Waters Styragel columns (HR1, HR2, HR4 and HR6) and an UV detector (270 nm). Tetrahydrofuran was used as the mobile phase and flow rate was 0.3 mL/min. The Polymer Standards Service WinGPC Unity software (Build 6807) was used for data processing for all the samples. The data provides information about the effects of CELF pretreatment time at 150 ºC on lignin molecular weights.

09 BIOMASS FUELS↗
DOE OSTI2024

Lignin content of Populus trichocarpa residues after CELF pretreatment and CBP fermentation

Here we present a dataset of lignin content from a woody energy crop (Populus trichocarpa) residues after a series of co-solvent enhanced lignocellulosic fractionation (CELF) pretreatment and consolidated bioprocessing (CBP) process. The natural poplar variant GW-9947 from the Center for Bioenergy Innovation (CBI) was used. The poplar was knife milled and passed through a 1 mm sieve and CELF pretreatment was performed in a Parr autoclave reactor with 7.5 wt % solids loading, 0.5 wt% H2SO4 as catalyst at 150°C with 5, 15, 25 and 30 minutes, respectively. Tetrahydrofuran was added in a 1:1 mass ratio with water as the pretreatment solvent. The residues from CELF pretreatment were then subjected to CBP using the bacterium C. thermocellum DSM 1313. CBP fermentations were performed at 60 °C in a shaker at 50, 75, and 100 grams/L solids loadings. The Klason lignin was measured using a two-step acid hydrolysis process. In brief, the poplar samples were first hydrolyzed by 72 wt% sulfuric acid at 30 oC for an hour. The hydrolysates were then diluted to 4 wt% sulfuric acid using deionized water and subsequently autoclaved at 121 oC for 1 h. Upon the completion of the two-step hydrolysis, the resulting solution was cooled to room temperature and the precipitate was then filtered through a G8 glass fiber filter through a crucible, dried at oven for overnight, and weighed to get the Klason lignin content. The lignin data provides information about lignin content changes after CELF and C. thermocellum CBP process.

Lignin Populus trichocarpa CELF pretreatment CBP f↗
DOE OSTI2024

Advances in Miscanthus × Giganteus Planting Techniques May Increase Carbon Uptake in the Establishment Year

Agricultural lands hold significant potential for CO 2 sequestration, particularly when utilizing biomass crops and agricultural residues. Among these, Miscanthus × giganteus (mxg) stands out due to its high productivity and carbon sequestration capabilities. Recognizing the importance of such biomass crops, the Intergovernmental Panel on Climate Change (IPCC) has identified Bioenergy with Carbon Capture and Storage (BECCS) as a crucial strategy for achieving net-zero CO 2 emissions by 2050. This study examines the carbon uptake potential of mxg during its establishment year at the Sustainable Advanced Bioeconomy Research (SABR) farm in Iowa, USA, where mxg was planted at a density exceeding previous studies. Using eddy covariance (EC) measurements, we quantified the net ecosystem carbon exchange (NEE), and derived gross primary productivity (GPP), and ecosystem respiration (R eco ). Our findings reveal that SABR's mxg exhibited a significant carbon uptake of –621 g C m –2 , a threefold increase compared to a similar EC site in the “corn-belt” (University of Illinois Energy Research Farm; UIEF), which was established with lower planting density and pre-commercial planting equipment. Favorable growing conditions and advanced planting technologies at SABR likely contributed to this high carbon uptake. Comparisons with other global EC studies indicated a strong correlation between higher planting densities and greater carbon uptake. These results suggest that increasing mxg planting density can enhance carbon uptake, but further studies are necessary to evaluate the impacts under varying environmental conditions and management practices. Additionally, economic analyses are essential to determine the viability of higher planting densities. Our study underscores the potential of optimized mxg management practices to contribute significantly to CO 2 uptake and supports the development of BECCS as a viable climate change mitigation strategy.

09 BIOMASS FUELS↗
DOE OSTI2022

Long-term compost amendment modulates wheat genotype differences in belowground carbon allocation, microbial rhizosphere recruitment and nitrogen acquisition

The implementation of soil health-promoting practices, such as cover cropping and compost application, has important implications for nutrient cycling and management in agroecosystems. At the same time, plant belowground carbon (C) allocation patterns can influence nutrient cycling and availability in soil through changes to the microbial community, but the effects may depend on the crop genotype and management practices in place. We evaluated belowground C allocation patterns using 13 C labeling and root architecture in two genotypes of winter wheat (Triticum aestivum) with different levels of exudation and belowground allocation strategies in soils with contrasting compost amendment legacy (108.7 Mg ha -1 every 2 years over 10 years vs. no compost). We also measured microbial community structure and function in the rhizosphere and quantified uptake of residue-derived N from 15 N-labelled cover crop residues. We found an interactive effect between soil management and genotype, where in the no-compost soil, the high-exudation genotype (Snowmass) increased exudation by over 4-fold, while the low-exudate genotype (Byrd) increased only 2-fold. While we did not observe genotype differences in rhizosphere enzyme activity or dissolved N pools, residue N uptake was 1.8 times greater for Snowmass in the compost-amended soil. There were more rhizosphere microbial taxa associated with the high-exudate genotype (Snowmass); nine bacterial and seven fungal families were indicative of Snowmass, versus one bacterial and four fungal families for Byrd. Our results suggest that the high-exudation strategy can influence the rhizosphere microbial community, and lead to greater short-term residue N uptake in high SOM soil. By directly linking root architecture, exudation, microbial communities, and N mineralization and uptake dynamics, this work demonstrates that plasticity in root C allocation is genotype-specific and influences microbial communities and nutrient cycling depending on the soil health context.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Two-dimensional heteronuclear single quantum coherence (HSQC) NMR spectra of lignin isolated from Populus trichocarpa residues after CELF pretreatment and CBP fermentation

Here we present a curated dataset of a series of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from a woody energy crop (Populus trichocarpa) residues after co-solvent enhanced lignocellulosic fractionation (CELF) pretreatment and consolidated bioprocessing (CBP) process. The natural poplar variant GW-9947 from the Center for Bioenergy Innovation (CBI) was used. The poplar was knife milled and passed through a 1 mm sieve. The CELF pretreatment was performed in a Parr autoclave reactor with 7.5 wt % solids loading, 0.5 wt% H2SO4 as catalyst at 150°C with 15, 25 and 30 minutes, respectively. Tetrahydrofuran was added in a 1:1 mass ratio with water as the pretreatment solvent. The residues from CELF pretreatment were then subjected to CBP using the bacterium C. thermocellum DSM 1313. CBP fermentations were performed at 60 °C in a shaker at 50 grams/L solids loadings. Lignin was isolated from the pretreated samples after ball-milling in a porcelain jar with ceramic balls via Retsch PM 200 at 580 rpm for 2.5 h followed by enzymatic hydrolysis in acetate buffer (pH 4.8, 50 °C) for 48 h. The lignin samples were characterized using 13C–1H HSQC experiments which were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus. A standard Bruker pulse sequence was used on a Prodigy platform cryoprobe. The dry lignin samples were dissolved in deuterated dimethylsulfoxide for HSQC experiments. The spectra were acquired under the following acquisition conditions: 210 ppm spectral width in F1 (13C) dimension with 256 data points and 11 ppm spectral width in F2 (1H) dimension with 1024 data points, a 90° pulse, a one bond C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. All the data was processed using the TopSpin 3.6 software (Bruker BioSpin). The NMR spectra provides structural characteristics information about lignin remaining in solids after CELF (150 °C with 15, 25 and 30 minutes) process and C. thermocellum CBP.

Lignin structure, HSQC, poplar, CELF, CBP, CBI↗
DOE OSTI2024

Bioenergy and Climate Change in Ukraine: How climate can impact the sustainability of bioenergy production

The Russian invasion has exacerbated Ukraine’s energy security issues, prompting a shift toward diversifying energy supply sources. Additionally, strategic documents aim to align Ukraine’s energy system with EU climate requirements, focusing on reducing reliance on fossil fuels and advancing decarbonization efforts. This report focuses on the expansion of bioenergy as an alternative source of energy in Ukraine. Current assessments suggest that Ukraine has substantial bioenergy potential, primarily from agricultural residues and energy crops. However, the challenges posed by climate change and the ongoing war might impact the outcome of these projections. This report highlights the importance of integrating climate factors into energy modeling using tools like the integrated assessment models to provide a comprehensive understanding of Ukraine’s bioenergy potential under various climate scenarios. It also emphasizes the need for climate-smart agriculture and forestry practices to mitigate risks, enhance energy efficiency, and support resilient crop supplies. Recommendations for stakeholders include diversification of the energy supply sources, developing adaptation strategies, diversifying bioenergy feedstocks, and ensuring robust decision-making to navigate the impacts of climate change on Ukraine’s energy system.

09 BIOMASS FUELS↗
DOE OSTI2024

Life Cycle Greenhouse Gas Emissions of Coal-Biomass Co-Firing Power Plants with Carbon Capture and Storage

The United States has set a target to achieve the net-zero economy by 2050. Bioenergy with Carbon Capture and Sequestration (BECCS) is one of the promising negative-emission routes in the mitigation portfolio to help meet this goal. Coal-biomass co-firing with carbon capture and storage (CCS) is a key BECCS technology to realize the carbon mitigation at fossil-fuel power plants. The mitigation potential of co-firing option is affected by numerous critical factors, such as biomass properties, co-firing level, and carbon capture rate. The objectives of the study are to characterize and estimate the life cycle greenhouse gas (GHG) emissions and performance of coal-biomass co-firing power plants with CCS, determine the breakeven co-firing level at power plants necessary to achieve net-zero life cycle emissions, and quantify the variabilities and uncertainties in life cycle emissions. The scope of the life cycle assessment includes the fuel supply, combustion-based power generation, and CO2 transport and storage. A fuel-based life cycle module is developed and embedded in the Integrated Environmental Control Model (IECM), a fossil-fuel power plant modeling tool. This study then applies the enhanced IECM to conduct the process-based life cycle assessment for an array of biomass co-firing scenarios. Deterministic analysis indicates that reaching net-zero life cycle emissions in a biomass co-firing plant without CCS deployment is challenging. Combining biomass co-firing and CCS deployment can significantly lower the overall life cycle emissions of power plants. Net-zero life cycle emissions can be achieved with a 20 wt.% co-firing level and 90% CCS when the Powder River Basin coal is co-fired with energy crops or forestry residues. However, the breakeven co-firing level for net-zero emissions depend on the selected fuel properties. Fuel supply and plant operation are the critical stages influencing the life cycle emissions of power plants with 90% CCS. Deployment of deep CCS beyond 90% CO2 capture can remarkably reduce operational emissions and the breakeven co-firing level. With 99% CCS, the breakeven co-firing rate can be reduced to 12% on average. These findings highlight the trade-offs between technical performance and environmental impact of biomass co-firing at coal-fired power plants and emphasize the role of deep CCS in achieving a net-zero emissions future.

Wu, Wanying↗
DOE OSTI2021

Can the multi-walled carbon nanotubes be used to alleviate the phytotoxicity of herbicides in soils?

Herbicides are commonly used globally. However, residual herbicides in soils for ages often result in phytotoxicity and serious yield loss to subsequent crops. In this paper, the multi-walled carbon nanotubes (MWCNTs) were utilized to amend the herbicide polluted soil, and the adsorption performance of herbicides to MWCNTs amended soil was studied. Results indicate efficient alleviation of herbicide-induced phytotoxicity to rice and tobacco due to MWCNTs amendment. When 0.4% MWCNTs were applied, the concentration of sulfentrazone that inhibited the same rice height by 50% (IC 50 ) increased to more than 3 times that of pure soil. When the MWCNTs were used to alleviate the phytotoxicity of quinclorac to tobacco, the MWCNTs not only alleviated the phytotoxicity of quinclorac but also promoted the growth of tobacco. Furthermore, the MWCNTs amended soil significantly increased the adsorption of herbicide to soil than biochar. The soil microbial analysis shows that MWCNTs had no significant effect on soil microbial community diversity, but the long-term exposure to MWCNTs could change the structure of the soil microbial community. Above all, our results highlighted the potential implication of the MWCNTs to ensure crop production by promoting crop growth and reducing the residual bioavailability of herbicides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Deconvoluting Structures of Component Plant Biopolymers Using Deuterium Labeled Brassica oleracea Stems

Several Brassica species are cultivated globally for the production of seed oils as food, lubricants, and increasingly biofuels. The stem and leaf residues of these herbaceous dicotyledonous crops constitute another feedstock for biofuels and other products. Plant cell walls are complex, multipolymeric structures that consist primarily of polysaccharides and lignin. Cellulose chains coalesce to form crystalline microfibrils while the amorphous biopolymers, hemicellulose, and lignin form a network structure and fill the interstitial space. Neutron scattering has been used for the structural study of the assembly and deconstruction of the plant cell walls. However, similar neutron sensitivity of the different amorphous biopolymers has made structural association to individual component biopolymers nontrivial and ambiguous. To improve the association of structural features to specific biopolymer components, partial deuteration of the plant cell wall can be employed to increase the difference in the neutron scattering length density between amorphous carbohydrate and lignin plant polymers. Vegetative stems from partially deuterated Brassica oleracea acephala (kale) plants were obtained commercially, and the plant cell wall structures were studied by contrast-variation small-angle neutron scattering (CV-SANS) and Fourier-transform infrared spectroscopy (FTIR). FTIR results indicated that deuterium substitution for hydrogen in the carbohydrates was higher than that in lignin. By combining CV-SANS and FTIR results, the neutron scattering length density (nSLD) of the polysaccharides and lignin was determined to match nSLD of 65%:35% and 48%:52% D 2 O/H 2 O solvent mixtures, respectively. These nSLD values were higher than the nSLD values of polysaccharides and lignin for H 2 O grown biopolymers. The nSLD increase correlates to replacing about 42.5% of hydrogens present as both C–H and O–H groups in cellulose with deuterium atoms, while only 21% for lignin. In conclusion, this study lays the foundation to use partially deuterated plants to deconvolute structural features of the different component biopolymers, especially cellulose, hemicellulose, and lignin, of the plant cell wall without introducing unintended structural modifications due to the pretreatment extraction processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Conservation management decreases surface runoff and soil erosion

Conservation management practices – including agroforestry, cover cropping, no-till, reduced tillage, and residue return – have been applied for decades to control surface runoff and soil erosion, yet results have not been integrated and evaluated across cropping systems. In this study we collected data comparing agricultural production with and without conservation management strategies. We used a bootstrap resampling analysis to explore interactions between practice type, soil texture, surface runoff, and soil erosion. We then used a correlation analysis to relate changes in surface runoff and soil erosion to 13 other soil health and agronomic indicators, including soil organic carbon, soil aggregation, infiltration, porosity, subsurface leaching, and cash crop yield. Across all conservation management practices, surface runoff and erosion had respective mean decreases of 67% and 80% compared with controls. Use of cover cropping provided the largest decreases in erosion and surface runoff, thus emphasizing the importance of maintaining continuous vegetative cover on soils. Coarse- and medium-textured soils had greater decreases in both erosion and runoff than fine-textured soils. Changes in surface runoff and soil erosion under conservation management were highly correlated with soil organic carbon, aggregation, porosity, infiltration, leaching, and yield, showing that conservation practices help drive important interactions between these different facets of soil health. This study offers the first large-scale comparison of how different conservation agriculture practices reduce surface runoff and soil erosion, and at the same time provides new insight into how these interactions influence the improvement or loss of soil health.

58 GEOSCIENCES↗
DOE OSTI2024

Biomolecular budget of persistent, microbial-derived soil organic carbon: The importance of underexplored pools

The details of how soil microorganisms contribute to stable soil organic carbon pools are a pressing knowledge gap with direct implications for soil health and climate mitigation. It is now recognized that microbial necromass contributes substantially to the formation of stable soil carbon. However, the quantification of necromass in soils has largely been limited to model molecules such as aminosugar biomarkers. The abundance and chemical composition of other persistent microbial residues remain unresolved, particularly concerning how these pools may vary with microbial community structure, soil texture, and management practices. We use yearlong soil incubation experiments with an isotopic tracer to quantify the composition of persistent residues derived from microbial communities inhabiting sand or silt dominated soil with annual (corn) or perennial (switchgrass) monocultures. Persistent microbial residues were recovered in diverse soil biomolecular pools including metabolites, proteins, lipids, and mineral-associated organic matter (MAOM). The relative abundances of microbial contributions to necromass pools were consistent across cropping systems and soil textures. The greatest residue accumulation was not recovered in MAOM but in the light density fraction of soil debris that persisted after extraction by chemical fractionation using organic solvents. Necromass abundance was positively correlated with microbial biomass abundance and revealed a possible role of cell wall morphology in enhancing microbial carbon persistence; while gram-negative bacteria accounted for the greatest contribution to microbial-derived carbon by mass at one year, residues from gram-positive Actinobacteria and Firmicutes showed greater durability. Together these results offer a quantitative assessment of the relative importance of diverse molecular classes for generating durable soil carbon.

54 ENVIRONMENTAL SCIENCES↗