Search NASA⌕ Search

SEARCH · Search NASA

Results for “cross ratio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The effect of polarization on radar detection of lightning

The polarization dependence of lightning echoes received with a 23-cm wavelength radar is estimated theoretically and experimentally. The reduction in the lightning radar cross-section due to the transmission of circular polarization instead of linear is measured to be about 4 dB and is much smaller than the 15-30 dB reduction in reflectivity of weak precipitation regions. The 8.7 dB average reduction in reflectivity maxima has been observed. This leads to an increase in the detected lightning flash rate by as much as 40%. The radar cross-section ratio of circular to linear polarization obtained experimentally suggests that lightning elements tend to be horizontally oriented.

Mazur, V.↗

A 200-MeV pi(+) induced nucleon removal from 24Mg

Nuclear gamma rays in coincidence with outgoing pions and/or protons following single nucleon removal from Mg24 by 200 MeV pi(+) were detected with Ge(Li) detectors. Differential cross sections are reported for gamma rays from the first excited mirror states of Na23 to Mg23 in coincidence with positive pions and/or protons detected in particle telescopes at 30, 60, 90, 120 and 150 deg; angle integrated absolute cross sections and cross section ratios sigma (Mg23/sigma (Na23) are calculated. These results are compared with the predictions of the one step quasifree (OSQF), the intranuclear cascade (INC), and the nucleon charge exchange (NCX) reaction models. The OSQF and the INC calculations generally agree with the experimental results, while the NCX calculations are in disagreement.

Joyce, D.↗

Planning for VRM: Radar and sonar studies of volcanic terrains on Earth, Venus and Mars

Venera 15 and 16 radar images of Venus, together with Earth based data from the Arecibo Observatory, indicate that volcanism has played an important role in the evolution of the Venusian landscape. At the end of this decade, NASA's Venus Radar Mapper (VRM) spacecraft will return near global information that will further constrain the planet's geologic history. Due to the diversity of volcano/tectonic features that have already been identified on Venus, and the intrinsic differences between radar images and conventional photography, additional expertise is being developed with which to interpret the VRM images of this unusual environment. Several attempts to better understand the physical characteristics of volcanic terrains are described here. Pioneer Venus radar altimeter measurements of topographic variability and surface roughness are compared with Goldstone radar measurements of volcanic terrains on Mars. Synthetic aperture radar images obtained by the SIR-B Space Shuttle experiment over Kilauea Volcano, Hawaii, are employed to investigate the differences in radar returns from pahoehoe, aa and sheet lava flows. Four polarization, multiple incidence angle, aircraft radar images of the Medicine Lake area of N. California are used to address the unusually high cross-polarization ratio of lobate flows around Beta Regio on Venus, as measured by the Arecibo radar.

Mouginis-Mark, P. J.↗

Ariel 6 measurements of ultra-heavy cosmic ray fluxes in the region Z or = 48

For this re-analysis of the Ariel VI data, the contribution of non Z square effects to the restricted energy loss and to Cerenkov radiation in the Bristol sphere has been evaluated using the Mott cross section ratios and the non-relativistic Bloch correction. Results obtained were similar in form to those derived for HEAO3 but with maximum deviations approximately 10% rather than 15% for the Mott term, corresponding to a thinner detector. Because of the large uncertainties in the parameters involved, no relativistic Bloch term was included. In addition the experiments on the HEAO detector make the application of a correction to the Cerenkov response of doubtful justification and none was applied in this analysis. An energy dependent correction was made using an effective energy calculated from the vertical cut-off for a given event. The maximum value of this correction was about 0.6% in Z for low cut-offs, declining to approximately zero by 10 GV.

Fowler, P. H.↗

Symmetry in polarimetric remote sensing

Relationships among polarimetric backscattering coefficients are derived from the viewpoint of symmetry groups. For both reciprocal and non-reciprocal media, symmetry encountered in remote sensing due to reflection, rotation, azimuthal, and centrical symmetry groups is considered. The derived properties are general and valid to all scattering mechanisms, including volume and surface scatterings and their interactions, in a given symmetrical configuration. The scattering coefficients calculated from theoretical models for layer random media and rough surfaces are shown to obey the symmetry relations. Use of symmetry properties in remote sensing of structural and environmental responses of scattering media is also discussed. Orientations of spheroidal scatterers described by spherical, uniform, planophile, plagiothile, erectophile, and extremophile distributions are considered to derive their polarimetric backscattering characteristics. These distributions can be identified from the observed scattering coefficients by comparison with theoretical symmetry calculations. A new parameter is then defined to study scattering structures in geophysical media. Observations from polarimetric data acquired by the Jet Propulsion Laboratory airborne synthetic aperture radar over forests, sea ice, and sea surface are presented. Experimental evidences of the symmetry relationships are shown and their use in polarimetric remote sensing is illustrated. For forests, the coniferous forest in Mt. Shasta area (California) and mixed forest near Presque Isle (Maine) exhibit characteristics of the centrical symmetry at C-band. For sea ice in the Beaufort Sea, multi-year sea ice has a cross-polarized ratio e close to e(sub 0), calculated from symmetry, due to the randomness in the scattering structure. First-year sea ice has e much smaller than e(sub 0) due to the preferential alignment of the columnar structure of the ice. From polarimetric data of a sea surface in the Bering Sea, it is observed that e and e(sub 0) are increasing with incident angle and e is greater than e(sub 0) at L-band because of the directional feature of sea surface waves. Symmetry properties of geophysical media can also be used to calibrate polarimetric radars.

Nghiem, S. V.↗

Polarimetric Remote Sensing of Geophysical Medium Structures

Polarimetric remote sensing of structures in geophysical media is studied in this paper based on their symmetry properties. Orientations of spheroidal scatterers described by spherical, uniform, planophile, plagiothile, erectophile, and extremophile distributions are considered to derive their polarimetric backscattering characteristics. These distributions can be identified from the observed scattering coefficients by comparison with theoretical symmetry calculations. A new parameter is defined to study scattering structures in geophysical media. Experimental observations from polarimetric data acquired by the Jet Propulsion Laboratory airborne synthetic aperture radar over forests, sea ice, and sea surface are presented to illustrate the use of symmetry properties. For forests, the coniferous forest in Mount Shasta area and mixed forests neir Presque Isle show evidence of the centrical symmetry at C band. In sea ice from the Beaufort Sea, multiyear sea ice has a cross-polarized ratio e close to e(sub 0), calculated from symmetry, due to the randomness in the scattering structure. For first-year sea ice, e is much smaller than e(sub 0) as a result of preferential alignment of the columnar structure of the ice. From polarimetric data of a sea surface in the Bering sea, it is observed that e and e(sub 0) are increasing with incident angle and e is greater than e(sub 0) at L band because of the directional feature of sea surface waves. Use of symmetry properties of geophysical media for polarimetric radar calibration is also suggested.

Nghiem, S. V.↗

Mixing of an Airblast-atomized Fuel Spray Injected into a Crossflow of Air

The injection of a spray of fuel droplets into a crossflow of air provides a means of rapidly mixing liquid fuel and air for combustion applications. Injecting the liquid as a spray reduces the mixing length needed to accommodate liquid breakup, while the transverse injection of the spray into the air stream takes advantage of the dynamic mixing induced by the jet-crossflow interaction. The structure of the spray, formed from a model plain-jet airblast atomizer, is investigated in order to determine and understand the factors leading to its dispersion. To attain this goal, the problem is divided into the following tasks which involve: (1) developing planar imaging techniques that visualize fuel and air distributions in the spray, (2) characterizing the airblast spray without a crossflow, and (3) characterizing the airblast spray upon injection into a crossflow. Geometric and operating conditions are varied in order to affect the atomization, penetration, and dispersion of the spray into the crossflow. The airblast spray is first characterized, using imaging techniques, as it issues into a quiescent environment. The spray breakup modes are classified in a liquid Reynolds number versus airblast Weber number regime chart. This work focuses on sprays formed by the "prompt" atomization mode, which induces a well-atomized and well-dispersed spray, and which also produces a two-lobed liquid distribution corresponding to the atomizing air passageways in the injector. The characterization of the spray jet injected into the crossflow reveals the different processes that control its dispersion. Correlations that describe the inner and outer boundaries of the spray jet are developed, using the definition of a two-phase momentum-flux ratio. Cross-sections of the liquid spray depict elliptically-shaped distributions, with the exception of the finely-atomized sprays which show kidney-shaped distributions reminiscent of those obtained in gaseous jet in crossflow systems. A droplet trajectory analysis overpredicts the liquid mass penetration, and indicates a need for a more rigorous model to account for the three-dimensional mixing field induced by the jet-crossflow interaction. Nonetheless, the general procedures and criteria that are outlined can be used to efficiently assess and compare the quality of sprays formed under different conditions.

Leong, May Y.↗

Estimation of Canopy Water Content in Konza Parry Grasslands Using Synthetic Aperture Radar Measurements During FIFE

This paper presents the development of an algorithm to retrieve the canopy water contents of natural grasslands and pasture from synthetic aperture radar (SAR) measurements. The development on this algorithm involves three interrelated steps: (1) calibration of SAR data for ground topographic variations, (2) development and validation of backscatter model for cross-polarized ratio. The polarimetric radar data acquired by the Jet Propulsion Laboratory AIRSAR system during the 1989 First International Satellite land Surface Climatology Project (ISLSCP) Field Experiment (FIFE) used for this study. The SAR data have been calibrated and corrected for the topographical effects by using the digital elevation map of the study area.

canopy water contents algorithm Konza Konza Parry ↗

Development of X-Ray Computed Tomography Image Quality Indicators, "IQIs"

The intent of this effort, which is funded through the NASA OSMA NDE Program, is to develop a methodology and tools to assess Computed Tomography (CT) system performance. In particular, our team has fabricated Image Quality Indicators (IQIs) using materials and internal features useful for assessing CT detectability limits, contrast sensitivity, and resolution. Unlike traditional 2D radiography IQIs, those for CT should be more conducive to volumetric datasets and of uniform aspect ratio cross-sections.

Additive Manufacturing↗

Preliminary Computational Assessment of Disk Rotating Detonation Engine Configurations

A rotating detonation engine (RDE) configuration whereby the working fluid enters and exits in a predominantly radial manner is examined using a quasi-two-dimensional computational fluid dynamic simulation. The simulation, based on a Cartesian coordinate system, was originally developed to examine the physics and performance of the more typical annular RDE. Modifications required to accommodate the radial and circumferential flowfield are discussed. The centripetal forces that arise in this disk RDE (DRDE) configuration create a different wave structure than that seen in the annular RDE. They also give rise to markedly different fluid behavior depending on whether the flow is radially inward or radially outward. Using an entropy-based measure of pressure gain, it is found that for the preliminary idealized calculations performed in this paper, the inward flowing DRDE outperforms the outward flowing variant. The inward flowing DRDE is further shown to outperform the equivalent annular RDE. The effects on performance of several parameters are examined, including inner-to-outer diameter ratio, inner-to-outer cross-sectional area ratio, and inlet throat-to-channel area ratio.

Paxson, Daniel E.↗

Preliminary Computational Assessment of Disk Rotating Detonation Engine Configurations

A rotating detonation engine (RDE) configuration whereby the working fluid enters and exits in a predominantly radial manner is examined using a quasi-two-dimensional computational fluid dynamic simulation. The simulation, based on a Cartesian coordinate system, was originally developed to examine the physics and performance of the more typical annular RDE. Modifications required to accommodate the radial and circumferential flowfield are discussed. The centripetal forces that arise in this disk RDE (DRDE) configuration create a different wave structure than that seen in the annular RDE. They also give rise to markedly different fluid behavior depending on whether the flow is radially inward or radially outward. Using an entropy-based measure of pressure gain, it is found that for the preliminary idealized calculations performed in this paper, the inward flowing DRDE outperforms the outward flowing variant. The inward flowing DRDE is further shown to outperform the equivalent annular RDE. The effects on performance of several parameters are examined, including inner-to-outer diameter ratio, inner-to-outer cross-sectional area ratio, and inlet throat-to-channel area ratio.

Paxson, Daniel E.↗

Spatial Grid-Based Object Localization from A Single Passive Sensor: A Deep Learning-Integrated Approach

Ongoing efforts at NASA’s Langley Research Center have produced a single passive sensor system for detecting ground objects and pinpointing their real-world location to a desired level of precision. The Langley center serves as a test range for unmanned aerial systems (UAS) and real-time knowledge about the location of people on campus is needed to inform least-risk UAS flight operations. The proposed system provides this knowledge through a camera combined with a convolutional neural network and an algorithm that projects an imaginary grid of square cells from the ground plane onto the perspective view of the camera. The position of detected objects on the camera’s projected grid determines their location in the real-world. The imaginary grid is easily mapped to a universal coordinate system, such as longitude and latitude, to provide both relative and absolute positional information of the detected objects. This simple system is shown to be accurate and effective, with decisive advantages over alternative multi-sensor and active sensor approaches. Extensions to the system are described to allow adaptation to a variety of other use cases.

object localization↗

Electromagnetic Dissociation Cross Sections using Weisskopf-Ewing Theory

It is important that accurate estimates of crew exposure to radiation are obtained for future long-term space missions. Presently, several space radiation transport codes exist to predict the radiation environment, all of which take as input particle interaction cross sections that describe the nuclear interactions between the particles and the shielding material. The space radiation transport code HZETRN uses the nuclear fragmentation model NUCFRG2 to calculate Electromagnetic Dissociation (EMD) cross sections. Currently, NUCFRG2 employs energy independent branching ratios to calculate these cross sections. Using Weisskopf-Ewing (WE) theory to calculate branching ratios, however, is more advantageous than the method currently employed in NUCFRG2. The WE theory can calculate not only neutron and proton emission, as in the energy independent branching ratio formalism used in NUCFRG2, but also deuteron, triton, helion, and alpha particle emission. These particles can contribute significantly to total exposure estimates. In this work, photonuclear cross sections are calculated using WE theory and the energy independent branching ratios used in NUCFRG2 and then compared to experimental data. It is found that the WE theory gives comparable, but mainly better agreement with data than the energy independent branching ratio. Furthermore, EMD cross sections for single neutron, proton, and alpha particle removal are calculated using WE theory and an energy independent branching ratio used in NUCFRG2 and compared to experimental data.

Adamczyk, Anne M.↗

Temperature and Chemical Species Distributions in the Middle Atmosphere Observed during Titan's Late Northern Spring to Early Summer

We present a study of the seasonal evolution of Titan’s thermal field and distributions of haze, C2H2, C2H4, C2H6, CH3C2H, C3H8, C4H2, C6H6, HCN, and HC3N from March 2015 (Ls = 66°) to September 2017 (Ls = 93°) (i.e., from the last third of northern spring to early summer). We analyzed thermal emission of Titan’s atmosphere acquired by the Cassini Composite Infrared Spectrometer with limb and nadir geometry to retrieve the stratospheric and mesospheric temperature and mixing ratios pole-to-pole meridional cross sections from 5 mbar to 50 μbar (120–650 km). The southern stratopause varied in a complex way and showed a global temperature increase from 2015 to 2017 at high-southern latitudes. Stratospheric southern polar temperatures, which were observed to be as low as 120 K in early 2015 due to the polar night, showed a 30 K increase (at 0.5 mbar) from March 2015 to May 2017 due to adiabatic heating in the subsiding branch of the global overturning circulation. All photochemical compounds were enriched at the south pole by this subsidence. Polar cross sections of these enhanced species, which are good tracers of the global dynamics, highlighted changes in the structure of the southern polar vortex. These high enhancements combined with the unusually low temperatures (<120 K) of the deep stratosphere resulted in condensation at the south pole between 0.1 and 0.03 mbar (240–280 km) of HCN, HC3N, C6H6 and possibly C4H2 in March 2015 (Ls = 66°). These molecules were observed to condense deeper with increasing distance from the south pole. At high-northern latitudes, stratospheric enrichments remaining from the winter were observed below 300 km between 2015 and May 2017 (Ls = 90°) for all chemical compounds and up to September 2017 (Ls = 93°) for C2H2, C2H4, CH3C2H, C3H8, and C4H2. In September 2017, these local enhancements were less pronounced than earlier for C2H2, C4H2, CH3C2H, HC3N, and HCN, and were no longer observed for C2H6 and C6 H6, which suggests a change in the northern polar dynamics near the summer solstice. These enhancements observed during the entire spring may be due to confinement of this enriched air by a small remaining winter circulation cell that persisted in the low stratosphere up to the northern summer solstice, according to predictions of the Institut Pierre Simon Laplace Titan Global Climate Model (IPSL Titan GCM). In the mesosphere we derived a depleted layer in C2H2, HCN, and C2H6 from the north pole to mid-southern latitudes, while C4H2, C3H4, C2H4, and HC3N seem to have been enriched in the same region. In the deep stratosphere, all molecules except C2H4 were depleted due to their condensation sink located deeper than 5 mbar outside the southern polar vortex. HCN, C4H2, and CH3C2H volume mixing ratio cross section contours showed steep slopes near the mid-latitudes or close to the equator, which can be explained by upwelling air in this region. Upwelling is also supported by the cross section of the C2H4 (the only molecule not condensing among those studied here) volume mixing ratio observed in the northern hemisphere. We derived the zonal wind velocity up to mesospheric levels from the retrieved thermal field. We show that zonal winds were faster and more confined around the south pole in 2015 (Ls = 67−72°) than later. In 2016, the polar zonal wind speed decreased while the fastest winds had migrated toward low-southern latitudes.

S Vinatier↗

Subsonic Longitudinal Aerodynamic Characteristics of Disks with Elliptic Cross Sections and Thickness-Diameter Ratios from 0.225 to 0.425

General interest in manned space flight has provided a stimulus for the investigation of shapes which appear to be attractive for application to re-entry vehicles. Such vehicles can be classed as either nonlifting or lifting. Nonlifting types, such as used in Project Mercury, have certain advantages which include structural simplicity, no requirement for an elaborate flight-control system, ease of mating with the booster, and short exposure times to high heating rates during entry. Advantages of lifting types, by comparison, include lower peak heating rates and decelerations, the possibility for a conventional horizontal landing, and the ability to maneuver, thus providing control over longitudinal and lateral range and a wider entry corridor on return from planetary or lunar missions. A lifting shape which appears attractive in terms of the considerations is a thick disk. At high attitudes, the weight to drag ratio is low and the radius of curvature of the surface exposed to the airstream is large, a combination of parameters which results in reduced convective heating rates. The low-speed lift-drag ratios associated with this type of shape appear sufficiently high to permit a conventional horizontal landing. The investigation reported herein was undertaken to assess the effects of thickness on the aerodynamic characteristics of disk shapes suitable for lifting re-entry into the earth's atmosphere and potentially capable of conventional horizontal landing. The models had elliptic cross sections which varied in thickness from 0.225 to 0.425 diameter. The tests were conducted in the Ames 12-Foot Pressure Wind Tunnel over a Mach number range from 0.25 to 0.90 at a Reynolds number of 3.3x10 (exp 6) and at Reynolds numbers to 16x10 (exp 6) at a Mach number of 0.25. Tests on similar shapes have been conducted at subsonic, transonic, and supersonic speeds and the results have been presented.

Demele, Fred A.↗

Computational study of duct and pipe flows using the method of pseudocompressibility

A viscous, three-dimensional, incompressible, Navier-Stokes Computational Fluid Dynamics code employing pseudocompressibility is used for the prediction of laminar primary and secondary flows in two 90-degree bends of constant cross section. Under study are a square cross section duct bend with 2.3 radius ratio and a round cross section pipe bend with 2.8 radius ratio. Sensitivity of predicted primary and secondary flow to inlet boundary conditions, grid resolution, and code convergence is investigated. Contour and velocity versus spanwise coordinate plots comparing prediction to experimental data flow components are shown at several streamwise stations before, within, and after the duct and pipe bends. Discussion includes secondary flow physics, computational method, computational requirements, grid dependence, and convergence rates.

Williams, Robert W.↗