SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The theoretical fundamentals and mathematical definitions for calculations involved with dual polarized radio links are given. Detailed derivations and results are discussed for several formulations applied to a general dual polarized radio link.
The Communications Technology Satellite, launched in January 1976 and embodying the highest power transmitter in a communications satellite, was considered. As a joint program between the U.S. and Canada, close coordination of the two countries was necessitated since the management and control of experiments were done in real time. Criteria used by NASA for acceptance of the United States experiments are noted and acceptance procedures are discussed. The category for each accepted experiment is given. The modus operandi employed for the U.S. experiments in the areas of management, coordination, liaison, and real time operation are described. Some of the highlights associated with satellite utilization are given.
Monthly statistical data are presented on ground rainfall rate and attenuation of satellite downlinks at 11.7 GHz, 19.04 GHz, and 28.56 GHz and on cross-polarization isolation at 11.7 GHz. Regression equations for relating isolation to attenuation, attenuation to rain rate, and attenuation at one frequency to attenuation at another frequency are also included. Longer-term statistics are also presented and discussed.
The U.S. experiments conducted with the Communications Technology Satellite, a joint Canadian-U.S. venture launched in 1976, are discussed. The 14/12 GHz frequencies employed by the 200-W transmitter on board the satellite provide two-way television and voice communications. Applications of the satellite in the categories of health care, community services and education are considered; experiments have also made use of the special properties of the super-high frequency band (e.g. link characterization and digital communications). Time-sharing of the 14/12 GHz communication between the U.S. and Canada has functioned well.
At each station the differences were measured between the local UTC seconds pulse and the remote UTC pulse received by satellite. The difference between the readings, if station delays are assumed to be symmetrical, is two times the difference between the clocks at the two ground station sites. Over a 20-minute period, the precision over the satellite is better than 1 ns. The time transfer from NRC to the CRC satellite terminal near Ottawa and from NBS to the Denver HEW terminal was examined.
Monthly and annual percent-of-time data on ground rain fall rate and attenuation on satellite downlinks at 11.7 GHz, 19.04 GHz, and 28.56 GHz is presented. Equal probability values of attenuation and rain rate are compared for monthly, quarterly, half-year periods and for the entire year. Regression equations relating cross polarization isolation to the logarithm of attenuation are also presented.
A scanning radiometer to be used for measuring cloud radiances in each of three spectral regions is described. Significant features incorporated in the Cloud Top Scanner design are: (1) flexibility and growth potential through use of easily replaceable modular detectors and filters; (2) full aperture, multilevel inflight calibration; (3) inherent channel registration through employment of a single shared field stop; and (4) radiometric sensitivity margin in a compact optical design through use of Honeywell developed (Hg,Cd)Te detectors and preamplifiers.
The long-term attenuation, cross-polarization, and rain-rate data monitored in Austin, Texas from the circularly polarized 11.7 GHz satellite beacon transmitter aboard the Communications Technology Satellite are analyzed. Data events are significantly more likely during April-September, than during October-March, except for ice deplorization which predominates during the winter months. A time of day dependence of the events is also noted. The 10 dB fade level is exceeded for .03% during the thunderstorm months. Isolation with the same probability is 23 dB.
Four thermal excursions of the Transmitter Experiment Package (TEP) were the result of the depriming of the arteries in all three heat pipes in the Variable Conductance Heat Pipe System which cooled the TEP. The determined cause of the depriming of the heat pipes was the formation of bubbles of the nitrogen/helium control gas mixture in the arteries during the thaw portion of a freeze/thaw cycle of the inactive region of the condenser section of the heat pipe. Conditions such as suction freezeout or heat pipe turn-on, which moved these bubbles into the active region of the heat pipe, contributed to the depriming mechanism. Methods for precluding, or reducing the probability of, this type of failure mechanism in future applications of arterial heat pipes are included.
A variety of control functions for the CIS HERMES satellite are reviewed. Its mission, to demonstrate high power SHF (12 GHz) transmission is discussed. The satellite was controlled in geostationary orbit for nearly four years from the satellite control center in Ottawa, Canada. Highlights of these operations are outlined. The interactions between many of the automatic onboard control functions and control from the ground are described. Special emphasis is placed on the characteristics and performance of the three axis attitude control system.
Satellite-to-earth rain attenuation at 11.7 GHz was measured at Waltham, Massachusetts (42.4 deg N, 71.3 deg W; elevation angle 25 deg), utilizing the Communications Technology Satellite beacon signal. This paper summarizes 29 months of measurements by presenting attenuation and rain rate distributions, fade duration distributions, fading rate distributions, and statistical relationships between attenuation and rain rate. For a two-year statistical base, rain attenuation exceeded 9.7 dB for 0.01 percent of the time and 2.0 dB for 0.1 percent of the time.
Automation of a computerized test system for comparative primate research is shown to improve the results of learning in standard paradigms. A mediational paradigm is used to determine the degree to which criterion in the learning-set testing reflects stimulus-response associative or mediational learning. Rhesus monkeys are shown to exhibit positive transfer as the criterion levels are shifted upwards, and the effectiveness of the computerized testing system is confirmed.
The PEGI Platform is designed to enable research relevant to developing solutions for these challenges and particularly focuses on the ability to develop advanced grid control functionality for power electronic-interfaced equipment. Capabilities aim at realizing accurate fast-time-scale responses of equipment at a scale that is relevant to industry.
NASA Commercial Crew Program (CCP) Crew Transportation System (CTS) Certification of Flight Readiness (CoFR) is the authorization granted by the Agency that certifies the flight readiness of a Commercial Provider’s CTS to conduct a flight test or mission to transport NASA Crew to and from the ISS. The Commercial Provider is responsible for developing and executing its plan for certifying the flight readiness of its CTS. The CCP with the International Space Station (ISS) Program must substantiate the Commercial Provider’s CoFR assertion to ensure compliance with NASA requirements and NASA Crew safety. NASA CCP CTS CoFR is the approval of the Commercial Provider’s evidence that: • The physical as-built CTS was produced, assembled, integrated, and tested within the approved production and operational constraints. • The mission specific requirements are enveloped within the certified CTS capabilities. • The CTS personnel are trained and certified to support the mission. • All aspects of the CTS are ready for the mission.
The National Energy Technology Laboratory (NETL) and Carbon To Stone (CTS), Inc. (Participant) will collaborate on a techno-economic assessment (TEA) and life cycle assessment (LCA) of CTS’s carbon dioxide removal (CDR) technology under an awarded project from the Department of Energy’s Direct Air Capture Pre-Commercialization Technology Prize. CTS has developed a technological platform that captures carbon dioxide (CO2) from air and mineralizes it into durable carbonates using alkaline industrial residues such as steel slag and mine tailings. In addition, CTS’s technology uses electrochemistry to recover value-added energy critical metals (ECMs) from these residues. NETL has expertise in CDR TEA and LCA development. The collaboration between CTS and NETL aims to quantify the performance, cost and lifecycle impacts of CTS’s technology and produce LCA and TEA models that can accelerate development and deployment of this technology.
Two calcium titanium oxide spherules (CTS) and an iron chromium nickel oxide one (FCN) were obtained from a segment of ice core collected at Mizuho Station, East Antarctica. An anomalous REE abundance pattern enriched in Sm by a factor of about 10 relative to the typical pattern of terrestrial perovskites was found. Subsequently, more than forty spherules from ten other depth ranges of the ice core were analyzed: (1) both CTS and FCN occur in every depth range; (2) CTS, FCN, and other are in the ratio of about 2:21 among all the analyzed spherules; (3) all of CTS show the same chemical and mineralogical characteristics as those previously obtained; (4) CTS contains some amounts of Cr and Fe, and/or FCN contains Ca and Ti; and (5) two composite particles exist among all the spherules. It is implied that CTS and FCN had originated in a common natural material and from a common natural process.
There were two objectives for this test. First, was to assess the reasons why there is approximately 1.5 drag counts (cts) discrepancy between measured and computed drag improvement of the Non-linear Cruise Validation (NCV) over the Technology Concept Airplane (TCA) wing body (WB) configurations. The Navier-Stokes (N-S) pre-test predictions from Boeing Commercial Airplane Group (BCAG) show 4.5 drag cts of improvement for NCV over TCA at a lift coefficient (CL) of 0. I at Mach 2.4. The pre-test predictions from Boeing Phantom Works - Long Beach, BPW-LB, show 3.75 drag cts of improvement. BCAG used OVERFLOW and BPW-LB used CFL3D. The first test entry to validate the improvement was held at the NASA Langley Research Center (LARC) UPV;T, test number 1687. The experimental results showed that the drag improvement was only 2.6 cts, not accounting for laminar run and trip drag. This is approximately 1.5 cts less than predicted computationally. In addition to the low Reynolds Number (RN) test, there was a high RN test in the Boeing Supersonic Wind Tunnel (BSWT) of NCV and TCA. BSV@T test 647 showed that the drag improvement of NCV over TCA was also 2.6 cts, but this did account for laminar run and trip drag. Every effort needed to be done to assess if the improvement measured in LaRC UPWT and BSWT was correct. The second objective, once the first objective was met, was to assess the performance increment of NCV over TCA accounting for the associated laminar run and trip drag corrections in LaRC UPWT. We know that the configurations tested have laminar flow on portions of the wing and have trip drag due to the mechanisms used to force the flow to go from laminar to turbulent aft of the transition location.
Carbon dioxide (CO 2 ) capture and storage (CCS) is frequently identified as a potential component to achieving a decarbonized power system at least cost; however, power system models frequently lack detailed representation of CO 2 transportation, injection, and storage (CTS) infrastructure. In this paper, we present a novel approach to explicitly represent CO 2 storage potential and CTS infrastructure costs and constraints within a continental-scale power system capacity expansion model. In addition, we evaluate the sensitivity of the results to assumptions about the future costs and performance of CTS components and carbon capture technologies. We find that the quantity of CO 2 captured within the power sector is relatively insensitive to the range of CTS costs explored, suggesting that the cost of CO 2 capture retrofits is a more important driver of CCS implementation than the costs of transportation and storage. Finally, we demonstrate that storage and injection costs account for the predominant share of total costs associated with CTS investment and operation, suggesting that pipeline infrastructure costs have limited influence on the competitiveness of CCS.