Search NASA⌕ Search

SEARCH · Search NASA

Results for “data accountability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Observability under recurrent loss of data

An account is given of the concept of extended observability in finite-dimensional linear time-invariant systems under recurrent loss of data, where the state vector has to be reconstructed from an ensemble of sensor data at nonconsecutive samples. An at once necessary and sufficient condition for extended observability that can be expressed via a recursive relation is presented, together with such conditions for this as may be related to the characteristic polynomial of the state transition matrix in a discrete-time setting, or of the system matrix in a continuous-time setting.

Luck, Rogelio↗
NASA NTRS1984

Analysis of Doppler lidar wind measurements

New analysis methods were developed and refined for the synthesis of wind fields from multiple Doppler radar data. Considerable software was written and debugged for wind field synthesis. The analysis methods were applied to radar data collected during the CCOPE experiment in which lidar wind measurements were also made. The analysis method differs from existing methods in that interpolation (using filters with assigned weights) and advection of data, to account for time differential between data acquisition at different points, are not used. Instead, functional fits were used in space and time coordinates to transfer radial velocity data to a space-time grid. Subsequently the wind synthesis is performed. This method gives better space resolution in the synthesized winds, compared to other methods in common use, by better preserving the gradients of velocities. The wind fields show the cellular structure characteristic of boundary-layer convection. Also evident in the analysis are the sharp transitions and gradients in the wind field which were preserved by the synthesis.

Srivastava, R. C.↗
NASA NTRS1986

Proceedings of the Second Airborne Imaging Spectrometer Data Analysis Workshop

The Second Airborne Imaging Spectrometer (AIS) Data Analysis Workshop was held at the Jet Propulsion Laboratory on May 6, 7, and 8, 1986. It was attended by 100 people from seven countries. Papers were presented by 24 attendees; summaries of 19 of the papers are published in these Workshop Proceedings. The Second Workshop was divided into three sessions: Calibration, the Atmosphere, and Data Techniques; Geological Research; and Botanical and Geobotanical Research. Because many of the AIS researchers have had an additional year to work with their data, a general advance was seen in the utilization of the data for solving earth science problems. The major conclusions that can be drawn from the Workshop are: (1) Almost everyone now working with AIS data is attempting to take into account in data analysis the effects of the atmosphere and sensor calibration and performance. As a result, information extraction techniques are becoming more sophisticated and effective. (2) The emphasis on work in the geological disciplines is beginning to shift to the application of AIS data for solving geological problems now that the efficacy of the data for mineral identification has been demonstrated. (3) In the botanical sciences, interpretation of AIS data is becoming more quantitative. Several statistical techniques are under development for extracting the subtle differences in plant spectra in the region of the near infrared and short wavelength infrared. In summary, an overall advance was seen in the ability to effectively utilize the fundamentally new class of data acquired with imaging spectrometers. There was also a general feeling at the Workshop however, that much work remains to be done in remote sensing research before the maximum potential of these data for solving earth science problems is realized.

Gregg Vane↗
NASA NTRS2005

Data management in the mission data system

As spacecraft evolve from simple embedded devices to become more sophisticated computing platforms with complex behaviors it is increasingly necessary to model and manage the flow of data, and to provide uniform models for managing data that promote adaptability, yet pay heed to the physical limitations of the embedded and space environments.

mission data system (MDS)↗
NASA NTRSDate not supplied

The Field Guide to NASA’s Life Sciences Data Repositories

For over 30 years, NASA has invested in life sciences research both in space and on the ground. Data accessibility is an important tool for researchers, and NASA has committed to preserving this vital resource for ongoing use. The Life Sciences Data Archive’s multi-center collaboration between NASA’s Johnson Space Center, Ames Research Center, and Kennedy Space Center is geared toward preserving unique and high-value data from a wide variety of disciplines, data collection methods, and species within NASA’s Life Sciences Portal (NLSP). The data generated by the Human Research Program (HRP) require a systematic approach to data preservation that accounts for diverse data sources, formats, physical storage requirements, and security and privacy protections. This poster presentation will provide a guide to the repositories where the various types of human, non-human animal, plant, and microbial data NASA generates are archived and tips for navigating these data collections. Topics will include where different types of data, metadata, and biospecimens are archived or preserved, how the federated repositories work together as a data preservation ecosystem, and how researchers can access each repository’s collections.

Robert S Beaton↗
NASA NTRSDate not supplied

A Field Guide to NASA’s Life Sciences Data Repositories

For over 30 years, NASA has invested in life sciences research both in space and on the ground. Data accessibility is an important tool for researchers, and NASA has committed to preserving this vital resource for ongoing use. The Life Sciences Data Archive’s multi-center collaboration between NASA’s Johnson Space Center, Ames Research Center, and Kennedy Space Center is geared toward preserving unique and high-value data from a wide variety of disciplines, data collection methods, and species within NASA’s Life Sciences Portal (NLSP). The data generated by the Human Research Program (HRP) require a systematic approach to data preservation that accounts for diverse data sources, formats, physical storage requirements, and security and privacy protections. This poster presentation will provide a guide to the repositories where the various types of human, non-human animal, plant, and microbial data NASA generates are archived and tips for navigating these data collections. Topics will include where different types of data, metadata, and biospecimens are archived or preserved, how the federated repositories work together as a data preservation ecosystem, and how researchers can access each repository’s collections.

LSDA↗
NASA NTRS1988

Spacelab data processing facility (SLDPF) Quality Assurance (QA)/Data Accounting (DA) expert systems: Transition from prototypes to operational systems

The SLDPF is responsible for the capture, quality monitoring processing, accounting, and shipment of Spacelab and/or Attached Shuttle Payloads (ASP) telemetry data to various user facilities. Expert systems will aid in the performance of the quality assurance and data accounting functions of the two SLDPF functional elements: the Spacelab Input Processing System (SIPS) and the Spacelab Output Processing System (SOPS). Prototypes were developed for each as independent efforts. The SIPS Knowledge System Prototype (KSP) used the commercial shell OPS5+ on an IBM PC/AT; the SOPS Expert System Prototype used the expert system shell CLIPS implemented on a Macintosh personal computer. Both prototypes emulate the duties of the respective QA/DA analysts based upon analyst input and predetermined mission criteria parameters, and recommended instructions and decisions governing the reprocessing, release, or holding for further analysis of data. These prototypes demonstrated feasibility and high potential for operational systems. Increase in productivity, decrease of tedium, consistency, concise historial records, and a training tool for new analyses were the principal advantages. An operational configuration, taking advantage of the SLDPF network capabilities, is under development with the expert systems being installed on SUN workstations. This new configuration in conjunction with the potential of the expert systems will enhance the efficiency, in both time and quality, of the SLDPF's release of Spacelab/AST data products.

Basile, Lisa↗
NASA NTRS1988

Spacelab data processing facility (SLDPF) quality assurance (QA)/data accounting (DA) expert systems - Transition from prototypes to operational systems

The SLDPF is responsible for the capture, quality monitoring processing, accounting, and shipment of Spacelab and/or Attached Shuttle Payloads (ASP) telemetry data to various user facilities. Expert systems will aid in the performance of the quality assurance and data accounting functions of the two SLDPF functional elements: the Spacelab Input Processing System (SIPS) and the Spacelab Output Processing System (SOPS). Prototypes were developed for each as independent efforts. The SIPS Knowledge System Prototype (KSP) used the commercial shell OPS5+ on an IBM PC/AT; the SOPS Expert System Prototype used the expert system shell CLIPS implemented on a Macintosh personal computer. Both prototypes emulate the duties of the respective QA/DA analysts based upon analyst input and predetermined mission criteria parameters, and recommended instructions and decisions governing the reprocessing, release, or holding for further analysis of data. These prototypes demonstrated feasibility and high potential for operational systems. Increase in productivity, decrease of tedium, consistency, concise historical records, and a training tool for new analyses were the principal advantages. An operational configuration, taking advantage of the SLDPF network capabilities, is under development with the expert systems being installed on SUN workstations. This new configuration in conjunction with the potential of the expert systems will enhance the efficiency, in both time and quality, of the SLDPF's release of Spacelab/AST data products.

Basile, Lisa↗
NASA NTRS2012

Accounting for Proof Test Data in a Reliability Based Design Optimization Framework

This paper investigates the use of proof (or acceptance) test data during the reliability based design optimization of structural components. It is assumed that every component will be proof tested and that the component will only enter into service if it passes the proof test. The goal is to reduce the component weight, while maintaining high reliability, by exploiting the proof test results during the design process. The proposed procedure results in the simultaneous design of the structural component and the proof test itself and provides the designer with direct control over the probability of failing the proof test. The procedure is illustrated using two analytical example problems and the results indicate that significant weight savings are possible when exploiting the proof test results during the design process.

Ventor, Gerharad↗
NASA NTRS2004

Data Management for Mars Exploration Rovers

Data Management for the Mars Exploration Rovers (MER) project is a comprehensive system addressing the needs of development, test, and operations phases of the mission. During development of flight software, including the science software, the data management system can be simulated using any POSIX file system. During testing, the on-board file system can be bit compared with files on the ground to verify proper behavior and end-to-end data flows. During mission operations, end-to-end accountability of data products is supported, from science observation concept to data products within the permanent ground repository. Automated and human-in-the-loop ground tools allow decisions regarding retransmitting, re-prioritizing, and deleting data products to be made using higher level information than is available to a protocol-stack approach such as the CCSDS File Delivery Protocol (CFDP).

Mars missions↗
NASA NTRS1978

Bank Terminals

In the photo, employees of the UAB Bank, Knoxville, Tennessee, are using Teller Transaction Terminals manufactured by SCI Systems, Inc., Huntsville, Alabama, an electronics firm which has worked on a number of space projects under contract with NASA. The terminals are part of an advanced, computerized financial transaction system that offers high efficiency in bank operations. The key to the system's efficiency is a "multiplexing" technique developed for NASA's Space Shuttle. Multiplexing is simultaneous transmission of large amounts of data over a single transmission link at very high rates of speed. In the banking application, a small multiplex "data bus" interconnects all the terminals and a central computer which stores information on clients' accounts. The data bus replaces the maze-of wiring that would be needed to connect each terminal separately and it affords greater speed in recording transactions. The SCI system offers banks real-time data management through constant updating of the central computer. For example, a check is immediately cancelled at the teller's terminal and the computer is simultaneously advised of the transaction; under other methods, the check would be cancelled and the transaction recorded at the close of business. Teller checkout at the end of the day, conventionally a time-consuming matter of processing paper, can be accomplished in minutes by calling up a summary of the day's transactions. SCI manufactures other types of terminals for use in the system, such as an administrative terminal that provides an immediate printout of a client's account, and another for printing and recording savings account deposits and withdrawals. SCI systems have been installed in several banks in Tennessee, Arizona, and Oregon and additional installations are scheduled this year.

Source record↗
NASA NTRS2014

Open Rotor Tone Shielding Methods for System Noise Assessments Using Multiple Databases

Advanced aircraft designs such as the hybrid wing body, in conjunction with open rotor engines, may allow for significant improvements in the environmental impact of aviation. System noise assessments allow for the prediction of the aircraft noise of such designs while they are still in the conceptual phase. Due to significant requirements of computational methods, these predictions still rely on experimental data to account for the interaction of the open rotor tones with the hybrid wing body airframe. Recently, multiple aircraft system noise assessments have been conducted for hybrid wing body designs with open rotor engines. These assessments utilized measured benchmark data from a Propulsion Airframe Aeroacoustic interaction effects test. The measured data demonstrated airframe shielding of open rotor tonal and broadband noise with legacy F7/A7 open rotor blades. Two methods are proposed for improving the use of these data on general open rotor designs in a system noise assessment. The first, direct difference, is a simple octave band subtraction which does not account for tone distribution within the rotor acoustic signal. The second, tone matching, is a higher-fidelity process incorporating additional physical aspects of the problem, where isolated rotor tones are matched by their directivity to determine tone-by-tone shielding. A case study is conducted with the two methods to assess how well each reproduces the measured data and identify the merits of each. Both methods perform similarly for system level results and successfully approach the experimental data for the case study. The tone matching method provides additional tools for assessing the quality of the match to the data set. Additionally, a potential path to improve the tone matching method is provided.

Bahr, Christopher J.↗
NASA NTRS1982

Automatic algebraic coordinate generation

A computer software system has been developed to automatically generate two-dimensional coordinates from algebraic transformations. For topologically complex regions, a smooth assembly of the transformations can be used to automatically produce a composite mesh where a general gridded format is retained. The algebraic mesh generation system consists of a collection of operator subroutines which are applied to an established data structure and which automatically perform the necessary parts of mesh construction from a sequence of multisurface transformations. The system operators are discussed, taking into account the data base, the order of application, direct surface generators, geometric surface operators, surface generators from existing surfaces, transverse operators, mesh operators, assembly operators, and data visualization operators. Attention is given to applications related to airfoils.

Eiseman, P. R.↗
NASA NTRS1977

The Nimbus 6 data catalog. Volume 6: Data orbits 4339 through 5155

Satellite operations from launch through 14 July (orbit 425) consisted of engineering evaluation of all spacecraft systems. As a result of that effort, data reception, accountability and processing were intermittent during that period. During orbit 4905 (12 June), Nimbus 6 successfully completed one year operations. A summary of the documentation for each Nimbus 6 Data Catalog volume is presented. The pitch of the Nimbus 6 satellite has been made to alternate between +2.0 degrees, +0.6 degrees, and 0.0 degrees since launch. A positive pitch angle of 0.6 degrees moves the nadir-looking position 11.5 kilometers ahead of the subsatellite point. A positive pitch angle of 2.0 degrees moves the nadir-looking position 38.3 kilometers ahead of the subsatellite point. At these pitch angles, a scanner-type instrument no longer scans the earth along a great circle arc through the subpoint, but scans along the small circle formed by the intersection of the scan plane with the earth. Since the plane of the small circle is tilted with respect to the nominal scan plane, points on the arc are displaced farther from the great circle as the scan angle increases. As noted above, a pitch angle of 0.6 degrees causes a displacement of 11.5 kilometers at nadir, but when the scanner turns 45 degrees away from nadir the displacement increases slightly to 12.8 kilometers. Similarly, for a 2.0 degree pitch the displacement is 38.3 kilometers at nadir and increases to 42.6 kilometers at a 45 degree scan angle. Thus, although the instrument records in lines normal to the orbit plane (in the absence of yaw) the perpendicular displacement from the perfect-attitude scan line is not uniform across the scan line.

Source record↗
NASA NTRS2012

Demonstration of Repeat-Pass POLINSAR Using UAVSAR: The RMOG Model

In this paper we show our first POLINSAR results using the Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) developed by the Jet Propulsion Laboratory (JPL). UAVSAR is a L-band repeat-pass polarimetric and interferometric system designed for measuring vegetation structure and monitoring crustal deformations. In order to extract canopy height from POLINSAR data and account for temporal decorrelation, we formulate a physical model of the temporal-volumetric coherence, random motion over ground (RMOG) model. Canopy height extracted from single-baseline UAVSAR data using the RMOG model is shown to be in agreement with canopy height measured by the Land, Vegetation, and Ice Sensor (LVIS) lidar.

polarimetry↗
NASA NTRS1985

A review of problems and progress in studies of satellite magnetic anomalies

A review is conducted of studies performed during the Magsat project. The obtained data are considered, taking into account questions of data availability, aspects of orbit attitude determination, ionospheric noise, a field model, and an anomaly field presentation. Models for interpretation are discussed, giving attention to forward modeling, and equivalent layer inverse modeling. In an evaluation of rock property constraints, the magnetic bottom is discussed along with Curie points, metamorphism and magnetization, and the direction of magnetization.

Mayhew, M. A.↗