Search NASA⌕ Search

SEARCH · Search NASA

Results for “degradation pathways”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Reliability and Power Degradation Rates of PERC Modules Using Differentiated Packaging Strategies and Characterization Tools

The reliability, durability and lifetime performance of passivated emitter, rear cell (PERC) modules used in real-world PV power plants is a critical challenge underlying the rapid adoption and bankability of these PERC cells, whose high efficiency help reduce the levelized cost of electricity (LCOE). We propose a degradation-science study of PERC module degradation pathways, benchmarking them relative to known degradation mechanisms and pathways of the incumbent aluminum back surface field (Al-BSF) modules exposed to real-world and accelerated exposure conditions.

14 SOLAR ENERGY↗
DOE OSTI2020

Flowthrough Pretreatment of Softwood under Water-only and Alkali Conditions

Flowthrough pretreatment provides valuable insight in the fundamentals of deconstruction of plant biomass. In this study, the potential softwood degradation pathways under water-only and alkali conditions were determined by elucidating the deconstructed biomass-derived products at 0-270 °C for 2-10 min at a flow rate of 25 mL/min with water-only or alkaline at initial pH of 8, 9, 11, and 12, respectively. Results indicated that the initial pH value was a convenient indicator along with the severity parameter to control biomass degradation through the non-oxidative (pH<9) and oxidative (pH=9) pathways. Up to 100 % of hemi-sugars, 90 % of cellulose, and 70 % of lignin were derived from softwood under non-oxidative conditions at severity parameter LogR0 around 5.5, respectively. On the contrary, at pH 12, the oxidative degradation resulted in pretreated hydrolysate rich in monomeric and oligomeric phenolic products as well as glycolic acid, acetic acid, and formic acid from carbohydrates. The two dimensional 1H-13C heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) analysis revealed that non-oxidative degradation at initial pH values lower than 9 mainly cleaved ß-O-4, all of the ß-ß, and ß-5/a-O-4 linkages, whereas substantial aromatic ring structures with limited ß-O-4 structures remaining at pH 12 through oxidative degradation.

Zhang, Libing↗
DOE OSTI2021

Lithium-ion battery physics and statistics-based state of health model

A pseudo-2d model using COMSOL Multiphysics® software is developed to simulate performance and performance degradation of Li-ion batteries consisting of layered and olivine cathodes with graphite anode when subjected to peak shaving grid service. Multiple degradation pathways are considered, including solid electrolyte interphase (SEI) formation and breakdown at the anode, cathode dissolution and its synergistic effect on SEI formation at the anode. The model is validated by simulating commercial cylindrical cell performance. A global model is developed to simulate performance across all chemistries, along with individual chemistry models using global model parameters as initial values. There is good agreement between these models for various optimization parameters such as SEI equilibrium potential, cathode dissolution exchange current density, solvent diffusivity in the SEI and SEI ionic conductivity. To circumvent time constraints related to the COMSOL model, a 0d global model is developed which fits data well and provides more clarity on differences in cathode dissolution exchange current density. Again, good agreement for various optimization parameters is obtained among the COMSOL global & individual chemistry models and the 0-d model. The lessons learned from the physics-based model is used to develop a top down statistics-based model using current, voltage and anode volumetric change per mole lithium intercalated, along with their interactions as degradation predictors. This model predicts out of sample degradation for multiple grid services and electric vehicle drive cycle with high accuracy and provides the pathway to develop an efficient battery management system combining machine learning and findings from physics-based computationally intensive algorithms.

Crawford, Aladsair J.↗
DOE OSTI2025

Multi-phase characterization of pitch-carbon coated nano-silicon anodes for lithium-ion batteries

Silicon (Si) is a leading next-generation Li-ion battery anode candidate that meets rigorous performance demands for portable power including enhanced power and energy density with robust cycling performance. However, a series of complex and interrelated reactions lead to reduced calendar life in Si-containing systems and therefore challenge practical adoption. In the present work, we probe the mechanisms underlying observed performance improvements by adding a pitch-carbon coating onto nano-Si material. We pair solid-phase (X-ray photoemission spectroscopy, Fourier-transform infrared), semi-volatile phase (solid-phase microextraction-gas chromatography-mass spectrometry), and gas-phase (gas chromatography-flame-ionization detector) characterization signals to comprehensively evaluate the impact of pitch-carbon coating on the evolution of the Si solid-electrolyte interphase (SEI) and the associated impacts on electrode/electrolyte reactivity. The pitch-carbon is found to serve as a physicochemical barrier, reducing the electro-active surface area for Si/electrolyte reactivity and preventing Si oxidation. Further, the pitch-carbon coating promotes the evolution of a more-favorable SEI by subsuming substantial functionality typically associated with the fluoroethylene carbonate (FEC) electrolyte additive - such as alkoxide scavenging and suppression of transesterification pathways - and by shifting the competitive electrolyte degradation pathways' favorability. The multi-phase characterization approach enables holistic end-products evaluation from complex (electro)chemical interfacial reactions, which informs a robust interpretation of the carbon coating's role in electrochemical performance improvements. The present mechanistic evaluation aids the rational design for improved nano-Si materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Challenges and Strategies to Advance High-Energy Nickel-Rich Layered Lithium Transition Metal Oxide Cathodes for Harsh Operation

Nickel-rich layered lithium transition metal oxides (LiNi 1–x–y Co x Mn y O 2 and LiNi 1–x–y Co x Al y O 2 , x + y ≤ 0.2) are the most attractive cathode materials for the next generation lithium-ion batteries for automotive application. However, they suffer from structural/interfacial instability during repeated charge/discharge, resulting in severe performance degradation and serious safety concerns. Here we provide a comprehensive review about challenges and strategies to advance nickel-rich layered cathodes specifically for harsh (high-voltage, high-temperature, and fast charging) operations. Firstly, the degradation pathways of nickel-rich cathodes including surface/interface degradation, undesired cathode–electrolytes parasitic reactions, gas evolution, inter/intragranular cracking, and electrical/ionic isolation are discussed. Then, recent achievements in stabilizing the structure/interface of nickel-rich cathodes via surface coating, cation/anion doping, composition tailoring, morphology engineering, and electrolytes optimization are summarized. Moreover, challenges and strategies to improve the performance of Ni-rich cathodes at the electrode level are discussed. Outlook and perspectives to promote the practical application of nickel-rich layered cathodes toward automotive application are provided as well.

25 ENERGY STORAGE↗
DOE OSTI2023

Proteomes reveal metabolic capabilities of Yarrowia lipolytica for biological upcycling of polyethylene into high-value chemicals

ABSTRACT Polyolefins derived from plastic wastes are recalcitrant for biological upcycling. However, chemical depolymerization of polyolefins can generate depolymerized plastic (DP) oil, comprising of a complex mixture of saturated, unsaturated, even, and odd hydrocarbons suitable for biological conversion. While DP oil contains a rich carbon and energy source, it is inhibitory to cells. Understanding and harnessing robust metabolic capabilities of microorganisms to upcycle the hydrocarbons in DP oil, both naturally and unnaturally occurring, into high-value chemicals are limited. Here, we discovered that an oleaginous yeast, Yarrowia lipolytica, undergoing short-term adaptation to DP oil robustly utilized a wide range of hydrocarbons for cell growth and production of citric acid and neutral lipids. When growing on hydrocarbons, Y. lipolytica partitioned into planktonic and oil-bound cells with each exhibiting distinct proteomes and amino acid distributions invested in establishing these proteomes. Significant proteome reallocation toward energy and lipid metabolism, belonging to 2 of the 23 Eukaryotic Orthologous Groups classes C and I, enabled robust growth of Y. lipolytica on hydrocarbons, with n-hexadecane as the preferential substrate. This investment was even higher for growth on DP oil where classes C and I were ranked one and two, respectively, and many associated proteins and pathways were expressed and upregulated including the hydrocarbon degradation pathway, Krebs cycle, glyoxylate shunt and, unexpectedly, propionate metabolism. However, a reduction in proteome allocation for protein biosynthesis, at the expense of the observed increase toward energy and lipid metabolisms, might have caused the inhibitory effect of DP oil on cell growth. IMPORTANCE Sustainable processes for biological upcycling of plastic wastes in a circular bioeconomy are needed to promote decarbonization and reduce environmental pollution due to increased plastic consumption, incineration, and landfill storage. Strain characterization and proteomic analysis revealed the robust metabolic capabilities of Yarrowia lipolytica to upcycle polyethylene into high-value chemicals. Significant proteome reallocation toward energy and lipid metabolisms was required for robust growth on hydrocarbons with n-hexadecane as the preferential substrate. However, an apparent over-investment in these same categories to utilize complex depolymerized plastic (DP) oil came at the expense of protein biosynthesis, limiting cell growth. Taken together, this study elucidates how Y. lipolytica activates its metabolism to utilize DP oil and establishes Y. lipolytica as a promising host for the upcycling of plastic wastes.

1-alkenes↗
DOE OSTI2021

Singlet Oxygen Leads to Structural Changes to Chloroplasts during their Degradation in the Arabidopsis thaliana plastid ferrochelatase two Mutant

Abstract During stress, chloroplasts produce large amounts of reactive oxygen species (ROS). Chloroplasts also contain many nutrients, including 80% of a leaf’s nitrogen supply. Therefore, to protect cells from photo-oxidative damage and to redistribute nutrients to sink tissues, chloroplasts are prime targets for degradation. Multiple chloroplast degradation pathways are induced by photo-oxidative stress or nutrient starvation, but the mechanisms by which damaged or senescing chloroplasts are identified, transported to the central vacuole and degraded are poorly defined. Here, we investigated the structures involved with degrading chloroplasts induced by the ROS singlet oxygen (1O2) in the Arabidopsis thaliana plastid ferrochelatase two (fc2) mutant. Under mild 1O2 stress, most fc2 chloroplasts appeared normal, but had reduced starch content. A subset of chloroplasts was degrading, and some protruded into the central vacuole via ‘blebbing’ structures. A 3D electron microscopy analysis demonstrated that up to 35% of degrading chloroplasts contained such structures. While the location of a chloroplast within a cell did not affect the likelihood of its degradation, chloroplasts in spongy mesophyll cells were degraded at a higher rate than those in palisade mesophyll cells. To determine if degrading chloroplasts have unique structural characteristics, allowing them to be distinguished from healthy chloroplasts, we analyzed fc2 seedlings grown under different levels of photo-oxidative stress. A correlation was observed among chloroplast swelling, 1O2 signaling and the state of degradation. Finally, plastoglobule (PG) enzymes involved in chloroplast disassembly were upregulated while PGs increased their association with the thylakoid grana, implicating an interaction between 1O2-induced chloroplast degradation and senescence pathways.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Sequential Abiotic-Biotic Processes Drive Organic Carbon Transformation in Peat Bogs

Peatlands, which store one-third of the terrestrial carbon (C), are subject to large disturbances under a changing climate. It is crucial to understand how microbial and physiochemical factors affect the vulnerability of these large C stores to predict climate induced greenhouse gas fluxes. Here, we used a combination of mass spectrometry and spectroscopy techniques, to understand sequential biotic and abiotic degradation pathways of Sphagnum fallax leachate in an anaerobic incubation experiment, in the presence and absence of microorganisms. Removal of microorganisms was carried out by passing aqueous samples through 0.2 µm filters. In this work, our results revealed that Sphagnum fallax leachate degradation by abiotic reactions is a significant contributor to CO 2 production. Further, abiotic factors, such as low pH, are responsible for partial dissolved organic carbon (DOC) degradation that produces bioavailable compounds that shift microbial metabolic pathways and stimulate respiration in peat bogs. Acid-catalyzed hydrolysis of Sphagnum-produced glycosides can provide the microbial communities with glucose and stimulate microbial respiration of DOC to CO 2 . These results, while unique to peatlands, demonstrate the importance and underscore the complexity of sequential abiotic and biotic processes on C cycling in peat bogs. It is therefore crucial to incorporate abiotic degradation and sequential below-ground biotic and abiotic interactions into climate models for a better prediction of the influence of climate change on DOC stability in peatlands. These findings might not be representative of other ecosystems with different environmental conditions including mineral-rich peatlands and plant matter in surface peat horizons that comprise discrete microbial populations, and DOC composition.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Low-Temperature Gold Deposition Improves CdTe Back Contacts

Improved back contacts can benefit CdTe photovoltaics (PV). In this work, Cd(Se,Te) PV absorbers are cooled during Au evaporation to thermally quench a chemical reaction occurring between gold and CdTe and the generation of a reaction product that lowers device efficiency. Reducing substrate temperature enhances PV power conversion efficiency via open-circuit voltage and fill factor increases. X-ray photoelectron spectroscopy (XPS) reveals that lower temperature also reduces chemical perturbations of the CdTe, potentially linking back contact formation to a CdTe degradation product that hinders PV performance. Comparing reaction enthalpy and substrate heating energy shows that back contact formation by sputtering elemental metals onto ZnTe may exhibit a degradation pathway analogous to that of CdTe/Au reported here. Degradation-diminishing contact formation processes are therefore of general interest for optoelectronic devices, and the reduced substrate temperature in this study is one example.

14 SOLAR ENERGY↗
DOE OSTI2022

Network Models of Active Degradation Mechanisms and Pathways for Service Life Prediction of Indoor and Outdoor PV Modules

ct: PV service lifetime prediction (SLP) enables accurate calculation of levelized cost of energy (LCOE), which is crucial to rationalizing PV investment and installation. However, SLP is challeging since PV reliability in the field is affected by many combined factors, including various environmental stresses and module quality. In order to map out the active degradation mechanisms and pathways that best resemble real world conditions, we introduce the framework of a study protocol and use network models fitted to data, to enable analysis and SLP of complex PV systems with multiple active degradation mechanisms. The study protocol is the experimental design, including module variants and different exposure conditions, selection of evaluation methods, time-series data acquisition and training of network models to these data. We present SLP of minimodules in the lab and PV systems in the field. For lab SLP, minimodules with 8 variants based on manufacturer, architecture, and encapsulation were prepared and aged in modified damp heat with or without full spectrum light exposure. Stepwise I-V and Suns-Voc data acquisition tracks changes in electrical properties including Rs,IV, Isc,IV, Vmp,PIV providing insights into power loss of minimodules. Network structural equation modeling (netSEM) was utilized to construct degradation pathway models that identify active degradation mechanisms and predict power loss over time. For field SLP, datastreams of Pmp values and I-V curve datastreams of two types of modules installed in three distinctly different Köppen-Geiger climate zones for 9 years were acquired. With power loss modes corresponding to uniform current loss (ΔPIsc), recombination (ΔPVoc), series resistance (ΔPRs), and current mismatch (ΔPImis) determined, the performance loss rates (PLR) were determined using PVplr. We show how to establish a study protocol framework to ensure appropriate parametric variations and valid data collection from the variants of your complex systems. Then the data-driven netSEM model fitting provides a comprehensive mapping of multiple active degradation mechanisms, and accurate service life prediction.

network model, degradation, photovoltaic, solar↗
DOE OSTI2021

Real-Time Investigation of Sn(II) Oxidation in Pb-Free Halide Perovskites by X-ray Absorption and Mössbauer Spectroscopy

Sn(II) halide perovskites are a less toxic alternative to Pb-based materials in perovskite solar cells, but oxidation to Sn(IV) introduces additional degradation pathways. Improving stability requires mechanistic pictures of O 2 - and H 2 O-induced degradation and their synergy. In this work, we demonstrate that X-ray absorption spectroscopy reports the average valency of the bulk material, allowing oxidation kinetics to be measured from minutes to days. Optical and X-ray diffraction studies demonstrate the challenge of isolating oxidative degradation with techniques lacking element specificity and oxidation state sensitivity. Finally, 119Sn Mössbauer spectroscopy is presented as a lab-based technique capable of providing information on valency and speciation throughout oxidation.

14 SOLAR ENERGY↗
DOE OSTI2022

Properties, Physiological Functions and Involvement of Basidiomycetous Alcohol Oxidase in Wood Degradation

Extensive research efforts have been devoted to describing yeast alcohol oxidase (AO) and its promoter region, which is vastly applied in studies of heterologous gene expression. However, little is known about basidiomycetous AO and its physiological role in wood degradation. This review describes several alcohol oxidases from both white and brown rot fungi, highlighting their physicochemical and kinetic properties. Moreover, the review presents a detailed analysis of available AO-encoding gene promoter regions in basidiomycetous fungi with a discussion of the manipulations of culture conditions in relation to the modification of alcohol oxidase gene expression and changes in enzyme production. The analysis of reactions catalyzed by lignin-modifying enzymes (LME) and certain lignin auxiliary enzymes (LDA) elucidated the possible involvement of alcohol oxidase in the degradation of derivatives of this polymer. Combined data on lignin degradation pathways suggest that basidiomycetous AO is important in secondary reactions during lignin decomposition by wood degrading fungi. With numerous alcoholic substrates, the enzyme is probably engaged in a variety of catalytic reactions leading to the detoxification of compounds produced in lignin degradation processes and their utilization as a carbon source by fungal mycelium.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Exploring Phosphonium‐Based Anion Exchange Polymers for Moisture Swing Direct Air Capture of Carbon Dioxide

This study explores the performance and stability of ammonium and phosphonium-based polymeric ionic liquids (PILs) with methyl and butyl substituents in moisture-swing direct air capture of CO 2 . The polymers are synthesized with chloride counterions, followed by ion exchange to the bicarbonate ion, and tests for CO 2 capture capacity and stability under cyclic wet–dry conditions. The phosphonium polymer with methyl substituents [PVBT-MeP] demonstrates the highest CO 2 capture capacity at ≈510 µmol g⁻¹, attributed to minimal steric hindrance and stronger ion pairing with bicarbonate. However, oxidative degradation is detected by 31 P NMR spectroscopy after the moisture swing experiment, with the appearance of a phosphine oxide peak at 61.28 ppm, which indicates phosphorus oxidation as the primary degradation pathway. In contrast, the ammonium polymer with butyl substituents [PVBT-BuN] exhibits the highest stability, showing no degradation over five moisture swing cycles. Additional stability experiments in 0.5 m KHCO 3 solutions reveal no degradation for any PIL, suggesting that oxidative degradation is driven by dynamic acid-base reactions during the moisture swing cycles in the air. Furthermore, these findings reveal the potential of phosphonium-based PILs for moisture-swing direct air capture, achieving high capacity while highlighting the need for optimized stability through counterion and structural design.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Microwave Regeneration and Thermal and Oxidative Stability of Imidazolium Cyanopyrrolide Ionic Liquid for Direct Air Capture of Carbon Dioxide

Abstract Understanding the oxidative and thermal degradation of CO 2 sorbents is essential for assessing long‐term sorbent stability in direct air capture (DAC). The potential degradation pathway of imidazolium cyanopyrrolide, an ionic liquid (IL) functionalized for superior CO 2 capacity and selectivity, is evaluated under accelerated degradation conditions to elucidate the secondary reactions that can occur during repetitive absorption‐desorption thermal‐swing cycles. The combined analysis from various spectroscopic, chromatographic, and thermal gravimetric measurements indicated that radical and S N 2 mechanisms in degradation are encouraged by the nucleophilicity of the anion. Thickening of the liquid and gas evolution are accompanied by 50 % reduction in CO 2 capacity after a 7‐day exposure to O 2 under 80 °C. To prevent long exposure to conventional thermal heating, microwave (MW) regeneration of the CO 2 ‐reactive IL is used, where dielectric heating at 80 and 100 °C rapidly desorbs CO 2 and regenerates the IL without any measurable degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Polyphenol rewiring of the microbiome reduces methane emissions

Methane mitigation is regarded as a critical strategy to combat the scale of global warming. Currently, ~40% of methane emissions originate from microbial sources, which is causing strategies to suppress methanogens—either through direct toxic effects or by diverting their substrates and energy—to gain traction. Problematically, current microbial methane mitigation knowledge lacks detailed microbiome-centered insights, limiting translation across conditions and ecosystems. Here we utilize genome-resolved metatranscriptomes and metabolomes to assess the impact of a proposed methane inhibitor, catechin, on greenhouse gas emissions for high-methane-emitting peatlands. In microcosms, catechin drastically reduced methane emissions by 72%–84% compared to controls. Longitudinal sampling allowed for reconstruction of a catechin degradation pathway involving Actinomycetota and Clostridium, which break down catechin into smaller phenolic compounds within the first 21 days, followed by degradation of phenolic compounds by Pseudomonas_E from Days 21 to 35. These genomes co-expressed hydrogen-uptake genes, suggesting hydrogenases may act as a hydrogen sink during catechin degradation and consequently reduce hydrogen availability to methanogens. In support of this idea, there was decreased gene expression by hydrogenotrophic and hydrogen-dependent methylotrophic methanogens under catechin treatment. There was also reduced gene expression from genomes inferred to be functioning syntrophically with hydrogen-utilizing methanogens. We propose that catechin metabolic redirection effectively starves hydrogen-utilizing methanogens, offering a potent avenue for curbing methane emissions across diverse environments including ruminants, landfills, and constructed or managed wetlands.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Field studies of PERC and Al-BSF PV module performance loss using power and I-V timeseries

We have studied the degradation of both full-sized modules and minimodules with PERC and Al-BSF cell variations in fields while considering packaging strategies. We demonstrate the implementations of data-driven tools to analyze large numbers of modules and volumes of timeseries data to obtain the performance loss and degradation pathways. This data analysis pipeline enables quantitative comparison and ranking of module variations, as well as mapping and deeper understanding of degradation mechanisms. The best performing module is a half-cell PERC, which shows a performance loss rate ( PLR ) of −0.27 ± 0.12% per annum (%/ a ) after initial losses have stabilized. Minimodule studies showed inconsistent performance rankings due to significant power loss contributions via series resistance, however, recombination losses remained stable. Overall, PERC cell variations outperform or are not distinguishable from Al-BSF cell variations.

Curran, Alan J.↗
DOE OSTI2022

Understanding of bacterial lignin extracellular degradation mechanisms by Pseudomonas putida KT2440 via secretomic analysis

Abstract Background Bacterial lignin degradation is believed to be primarily achieved by a secreted enzyme system. Effects of such extracellular enzyme systems on lignin structural changes and degradation pathways are still not clearly understood, which remains as a bottleneck in the bacterial lignin bioconversion process. Results This study investigated lignin degradation using an isolated secretome secreted by Pseudomonas putida KT2440 that grew on glucose as the only carbon source. Enzyme assays revealed that the secretome harbored oxidase and peroxidase/Mn 2+ -peroxidase capacity and reached the highest activity at 120 h of the fermentation time. The degradation rate of alkali lignin was found to be only 8.1% by oxidases, but increased to 14.5% with the activation of peroxidase/Mn 2+ -peroxidase. Gas chromatography–mass spectrometry (GC–MS) and two-dimensional 1 H– 13 C heteronuclear single-quantum coherence (HSQC) NMR analysis revealed that the oxidases exhibited strong C–C bond ( β-β , β -5, and β -1) cleavage. The activation of peroxidases enhanced lignin degradation by stimulating C–O bond ( β -O-4) cleavage, resulting in increased yields of aromatic monomers and dimers. Further mass spectrometry-based quantitative proteomics measurements comprehensively identified different groups of enzymes particularly oxidoreductases in P. putida secretome, including reductases, peroxidases, monooxygenases, dioxygenases, oxidases, and dehydrogenases, potentially contributed to the lignin degradation process. Conclusions Overall, we discovered that bacterial extracellular degradation of alkali lignin to vanillin, vanillic acid, and other lignin-derived aromatics involved a series of oxidative cleavage, catalyzed by active DyP-type peroxidase, multicopper oxidase, and other accessory enzymes. These results will guide further metabolic engineering design to improve the efficiency of lignin bioconversion. Graphical Abstract

09 BIOMASS FUELS↗
DOE OSTI2024

Radiolytic evaluation of a new technetium redox control reagent for advanced used nuclear fuel separations

Technetium is a problematic radioisotope for used nuclear fuel (UNF) and subsequent waste management owing to its high environmental mobility and coextraction in reprocessing technologies as the pertechnetate anion (TcO 4 - ). Consequently, several strategies are under development to control the transport of this radioisotope. A proposed approach is to use diaminoguanidine (DAG) for TcO 4 - and transuranic ion redox control. Although the initial DAG molecule is ultimately consumed in the redox process, its susceptibility to radiolysis is currently unknown under envisioned UNF reprocessing conditions, which is a critical knowledge gap for evaluating its overall suitability for this role. To this end, we report the impacts of steady-state gamma irradiation on the rate of DAG radiolysis in water, aqueous 2.0 M nitric acid (HNO 3 ), and in a biphasic solvent system composed of aqueous 2.0 M HNO 3 in contact with 1.5 M N,N-di-(2-ethylhexyl)isobutyramide (DEHiBA) dissolved in n-dodecane. In addition, we report chemical kinetics for the reaction of DAG with key transients arising from electron pulse radiolysis, specifically the hydrated electron (e aq - ), hydrogen atom (H ˙ ), and hydroxyl ( ˙ OH) and nitrate (NO 3 ˙ ) radicals. The DAG molecule exhibited significant reactivity with the ˙ OH and NO 3 ˙ radicals, indicating that oxidation would be the predominant degradation pathway in radiation environments. This is consistent with its role as a reducing agent. Steady-state gamma irradiations demonstrated that DAG is readily degraded within a few hundred kilogray, the rate of which was found to increase upon going from water to HNO 3 containing solutions and solvents systems. This was attributed to a thermal reaction between DAG and the predominant HNO 3 radiolysis product, nitrous acid (HNO 2 ), k(DAG + HNO 2 ) = 5480 ± 85 M -1 s -1 . Although no evidence was found for the radiolysis of DAG altering the radiation chemistry of the contacted DEHiBA/n-dodecane phase in the investigated biphasic system, the utility of DAG as a redox control reagent will likely be limited by significant competition with its degradation by HNO 2 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗