Search NASA⌕ Search

SEARCH · Search NASA

Results for “design theory and methodology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Decision theory in structural reliability

Some fundamentals of reliability analysis as applicable to aerospace structures are reviewed, and the concept of a test option is introduced. A decision methodology, based on statistical decision theory, is developed for determining the most cost-effective design factor and method of testing for a given structural assembly. The method is applied to several Saturn V and Space Shuttle structural assemblies as examples. It is observed that the cost and weight features of the design have a significant effect on the optimum decision.

Thomas, J. M.↗

Magnetic Actuators and Suspension for Space Vibration Control

The research on microgravity vibration isolation performed at the University of Virginia is summarized. This research on microgravity vibration isolation was focused in three areas: (1) the development of new actuators for use in microgravity isolation; (2) the design of controllers for multiple-degree-of-freedom active isolation; and (3) the construction of a single-degree-of-freedom test rig with umbilicals. Described are the design and testing of a large stroke linear actuator; the conceptual design and analysis of a redundant coarse-fine six-degree-of-freedom actuator; an investigation of the control issues of active microgravity isolation; a methodology for the design of multiple-degree-of-freedom isolation control systems using modern control theory; and the design and testing of a single-degree-of-freedom test rig with umbilicals.

Knospe, Carl R.↗

Pilot-optimal multivariable control synthesis by output feedback

A control system design approach for optimal stability augmentation, systems, using limited state feedback theory with the specific inclusion of the human pilot in the loop is presented. The methodology is especially suitable for application to flight vehicles exhibiting nonconventional dynamic characteristics and for which quantitative handling qualities specifications are not available. The design is based on a correlation between pilot ratings and objective function of the optimal control model of the human pilot. Simultaneous optimization for augmentation and pilot gains are required.

Schmidt, D. K.↗

Aeroservoelasticity

Accomplishments and current research projects along four main thrusts in aeroservoelasticity at the NASA Langley Research Center are described. One activity focuses on enhancing the modelling and the analysis procedures to accurately predict aeroservoelastic interactions. In the area of modelling, improvements to the minimum-state method of approximating unsteady aerodynamics are shown to provide precise, low-order models for design and simulation tasks. Recent extensions in aerodynamic correction factor methodology are also described. With respect to analysis procedures, the paper reviews novel enhancements to Matched Filter Theory and Random Process Theory for predicting the critical gust profile and the associated time-correlated gust loads for structural design considerations. In another activity, two research projects leading towards improved design capability are summarized. The first program involves the development of an integrated structure/control design capability; the second provides procedures for obtaining low-order, robust digital control laws for aeroelastic applications. Experimental validation of new theoretical developments is the third activity. As such, a short description of the Active Flexible Wing Project is presented, and recent wind-tunnel test accomplishments are summarized. Finally within the area of application, a study performed to assess the state-of-the-art of aeroelastic and aeroservoelastic analysis and design technology with respect to hot, hypersonic flight vehicles is reviewed.

Noll, Thomas E.↗

Aeroservoelasticity

The paper describes recent accomplishments and current research projects along four main thrusts in aeroservoelasticity at NASA Langley. One activity focuses on enhancing the modeling and analysis procedures to accurately predict aeroservoelastic interactions. Improvements to the minimum-state method of approximating unsteady aerodynamics are shown to provide precise low-order models for design and simulation tasks. Recent extensions in aerodynamic correction-factor methodology are also described. With respect to analysis procedures, the paper reviews novel enhancements to matched filter theory and random process theory for predicting the critical gust profile and the associated time-correlated gust loads for structural design considerations. Two research projects leading towards improved design capability are also summarized: (1) an integrated structure/control design capability and (2) procedures for obtaining low-order robust digital control laws for aeroelastic applications.

Noll, Thomas E.↗

Application of control theory to dynamic systems simulation

The application of control theory is applied to dynamic systems simulation. Theory and methodology applicable to controlled ecological life support systems are considered. Spatial effects on system stability, design of control systems with uncertain parameters, and an interactive computing language (PARASOL-II) designed for dynamic system simulation, report quality graphics, data acquisition, and simple real time control are discussed.

Auslander, D. M.↗

A two-phase methodology for technology selection and system design

A two-phase methodology that can be used to guide R&D managers in the evaluation and selection of competing technologies is presented. Deterministic multiattribute utility theory is used in the first phase to rank the technological alternatives; the example presented involves the evaluation of electric and hybrid passenger vehicles. In all, 39 individuals from eight automotive firms were interviewed to assess their risk preferences and attitudes toward the vehicle design. In the second phase, the decision-maker must allocate a fixed amount of resources to different projects for the technology selected, some of which may be undertaken in parallel, to maximize a given measure of performance. When parallel funding is pursued the best outcome is chosen. The problem is formulated as a probabilistic network and solved heuristically using Monte Carlo simulation. Results are presented for two decision-makers and three budget options. In each case, the heuristic finds the optimal allocation of funds.

Bard, Jonathan F.↗

Optimization of Insertion Cost for Transfer Trajectories to Libration Point Orbits

The objective of this work is the development of efficient techniques to optimize the cost associated with transfer trajectories to libration point orbits in the Sun-Earth-Moon four body problem, that may include lunar gravity assists. Initially, dynamical systems theory is used to determine invariant manifolds associated with the desired libration point orbit. These manifolds are employed to produce an initial approximation to the transfer trajectory. Specific trajectory requirements such as, transfer injection constraints, inclusion of phasing loops, and targeting of a specified state on the manifold are then incorporated into the design of the transfer trajectory. A two level differential corrections process is used to produce a fully continuous trajectory that satisfies the design constraints, and includes appropriate lunar and solar gravitational models. Based on this methodology, and using the manifold structure from dynamical systems theory, a technique is presented to optimize the cost associated with insertion onto a specified libration point orbit.

Howell, K. C.↗

The application of quadratic optimal cooperative control synthesis to a CH-47 helicopter

A control-system design method, Quadratic Optimal Cooperative Control Synthesis (CCS), is applied to the design of a Stability and Control Augmentation Systems (SCAS). The CCS design method is different from other design methods in that it does not require detailed a priori design criteria, but instead relies on an explicit optimal pilot-model to create desired performance. The design model, which was developed previously for fixed-wing aircraft, is simplified and modified for application to a Boeing Vertol CH-47 helicopter. Two SCAS designs are developed using the CCS design methodology. The resulting CCS designs are then compared with designs obtained using classical/frequency-domain methods and Linear Quadratic Regulator (LQR) theory in a piloted fixed-base simulation. Results indicate that the CCS method, with slight modifications, can be used to produce controller designs which compare favorably with the frequency-domain approach.

Townsend, Barbara K.↗

The application of quadratic optimal cooperative control synthesis to a CH-47 helicopter

A control-system design method, quadratic optimal cooperative control synthesis (CCS), is applied to the design of a stability and control augmentation system (SCAS). The CCS design method is different from other design methods in that it does not require detailed a priori design criteria, but instead relies on an explicit optimal pilot-model to create desired performance. The design method, which was developed previously for fixed-wing aircraft, is simplified and modified for application to a Boeing CH-47 helicopter. Two SCAS designs are developed using the CCS design methodology. The resulting CCS designs are then compared with designs obtained using classical/frequency-domain methods and linear quadratic regulator (LQR) theory in a piloted fixed-base simulation. Results indicate that the CCS method, with slight modifications, can be used to produce controller designs which compare favorably with the frequency-domain approach.

Townsend, Barbara K.↗

A comparison of frequency domain design and l1-optimal control

A frequency-domain design methodology is applied to a DC motor-speed control system and the results are compared to those obtained using l1-optimal control theory (Pearson and Bamieh, 1990). Both methods synthesize controllers that maximize the allowable size of an unknown-but-bounded disturbance while satisfying prespecified constraints on the control, the control rate, and the outputs. The frequency-domain design technique in general results in much lower-order compensators than those required by the l1-optimal method for a given size of disturbance. Also, the design trade-offs regarding the bandwidth of the system, the size of the disturbance input, and the structural complexity of the controller transfer function become quite transparent.

Jayasuriya, Suhada↗

Design of an Ultra-Efficient GaN High Power Amplifier for Radar Front-Ends Using Active Harmonic Load-Pull

This work presents a new measurement technique, mixed-signal active harmonic load-pull (MSALP) developed by Anterverta-mw in partnership with Maury Microwave, that allows for wide-band ultra-high efficiency amplifiers to be designed using GaN technology. An overview of the theory behind active load-pull is presented and why load-pull is important for high-power device characterization. In addition, an example procedure is presented that outlines a methodology for amplifier design using this measurement system. Lastly, measured results of a 10W GaN amplifier are presented. This work aims to highlight the benefit of using this sophisticated measurement systems for to optimize amplifier design for real radar waveforms that in turn will simplify implementation of space-based radar systems

Active Load-pull↗

Loop Shaping Control Design for a Supersonic Propulsion System Model Using Quantitative Feedback Theory (QFT) Specifications and Bounds

This paper covers the propulsion system component modeling and controls development of an integrated mixed compression inlet and turbojet engine that will be used for an overall vehicle Aero-Propulso-Servo-Elastic (APSE) model. Using previously created nonlinear component-level propulsion system models, a linear integrated propulsion system model and loop shaping control design have been developed. The design includes both inlet normal shock position control and jet engine rotor speed control for a potential supersonic commercial transport. A preliminary investigation of the impacts of the aero-elastic effects on the incoming flow field to the propulsion system are discussed, however, the focus here is on developing a methodology for the propulsion controls design that prevents unstart in the inlet and minimizes the thrust oscillation experienced by the vehicle. Quantitative Feedback Theory (QFT) specifications and bounds, and aspects of classical loop shaping are used in the control design process. Model uncertainty is incorporated in the design to address possible error in the system identification mapping of the nonlinear component models into the integrated linear model.

Connolly, Joseph W.↗

Robust Control Design for Large Space Structures

The control design problem for the class of future spacecraft referred to as large space structures (LSS) is by now well known. The issue is the reduced order control of a very high order, lightly damped system with uncertain system parameters, particularly in the high frequency modes. A design methodology which incorporates robustness considerations as part of the design process is presented. Combining pertinent results from multivariable systems theory and optimal control and estimation, LQG eigenstructure assignment and LQG frequency shaping, were used to improve singular value robustness measures in the presence of control and observation spillover.

Eastman, W. L.↗

An aircraft model for the AIAA controls design challenge

A generic, state-of-the-art, high-performance aircraft model, including detailed, full-envelope, nonlinear aerodynamics, and full-envelope thrust and first-order engine response data is described. While this model was primarily developed Controls Design Challenge, the availability of such a model provides a common focus for research in aeronautical control theory and methodology. An implementation of this model using the FORTRAN computer language, associated routines furnished with the aircraft model, and techniques for interfacing these routines to external procedures is also described. Figures showing vehicle geometry, surfaces, and sign conventions are included.

Brumbaugh, Randal W.↗

Design of feedback control systems for unstable plants with saturating actuators

A new control design methodology is introduced for multi-input/multi-output systems with unstable open loop plants and saturating actuators. A control system is designed using well known linear control theory techniques and then a reference prefilter is introduced so that when the references are sufficiently small, the control system operates linearly as designated. For signals large enough to cause saturations, the control law is modified in such a way to ensure stability and to preserve, to the extent possible, the behavior of the linear control design. Key benefits of this methodology are: the modified feedback system never produces saturating control signals, integrators and/or slow dynamics in the compensator never windup, the directionaL properties of the controls are maintained, and the closed loop system has certain guaranteed stability properties. The advantages of the new design methodology are illustrated in the simulation of an approximation of the AFTI-16 (Advanced Fighter Technology Integration) aircraft multivariable longitudinal dynamics.

Kapasouris, Petros↗

Integrated control-system design via generalized LQG (GLQG) theory

Thirty years of control systems research has produced an enormous body of theoretical results in feedback synthesis. Yet such results see relatively little practical application, and there remains an unsettling gap between classical single-loop techniques (Nyquist, Bode, root locus, pole placement) and modern multivariable approaches (LQG and H infinity theory). Large scale, complex systems, such as high performance aircraft and flexible space structures, now demand efficient, reliable design of multivariable feedback controllers which optimally tradeoff performance against modeling accuracy, bandwidth, sensor noise, actuator power, and control law complexity. A methodology is described which encompasses numerous practical design constraints within a single unified formulation. The approach, which is based upon coupled systems or modified Riccati and Lyapunov equations, encompasses time-domain linear-quadratic-Gaussian theory and frequency-domain H theory, as well as classical objectives such as gain and phase margin via the Nyquist circle criterion. In addition, this approach encompasses the optimal projection approach to reduced-order controller design. The current status of the overall theory will be reviewed including both continuous-time and discrete-time (sampled-data) formulations.

Bernstein, Dennis S.↗

Identifying and Documenting Expert Knowledge, A Practical Study of Design Patterns

Globalization, powered by digitization, is increasing technology growth and knowledge transfer rates to levels not seen in the previous 3500 years, obscuring absolute truth and accelerating rates of innovation and production. Competing,or remaining competitive, in this global marketplace requires a learning organization adopt a method of capture, retention, and reuse for demonstrated tacit knowledge to accelerate the development of increasingly complex systems of high quality at a reasonable cost. The architectural theory of Patterns and Pattern Language is a validated methodology for mining tacit domain knowledge from a proven system. This work applies architectural theory to a multi-year development experiment and captures exposed knowledgeas a design patternin a model based systems engineering tool, demonstrating applicability ofdigital engineering initiativesin thedescription and reuse of expert design knowledge.By creating and archiving model based expressions of expert knowledge,a learning organization canimprovepractical decision making and avoid uninformed concept phase decision making

systems engineering↗