Search NASA⌕ Search

SEARCH · Search NASA

Results for “diameter distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Intrinsic Performance Variability in Aligned Array CNFETs

Here, the I-V characteristic of carbon nanotube (CNT) transistors is dictated by the Schottky barrier (SB) at metal-nanotube interface. The SB is defined by the diameter of the CNT along with the source/drain metal and is presumed a device constant for single CNT transistors. Given the wide distribution of diameter of CVD-grown nanotubes, the presumption of single SB, however, is inappropriate for transistors with aligned array of CNTs. Indeed, array transistors with similar geometries and contact material can still exhibit considerable variation in threshold voltage (V T ), on current (I ON ), and device resistance (R d ). We use measured diameter distribution within the framework of detailed numerical simulations to demonstrate that the diameter distribution of CNTs (in CNT FETs) plays a dominant role in defining the fluctuation of array transistors. Besides, it is argued that the large-scale integration of these devices within an IC would be feasible only if the distribution of diameter is considerably narrowed.

42 ENGINEERING↗

Orientational Growth of Carbon Nanotube for Applications

Since the superior properties of multi-wall carbon nanotubes (MWCNT) could improve numerous devices such as electronics and sensors, many efforts have been made in investigating the growth mechanism of MWCNT to synthesize high quality MWCNT. Most applications require uniform aligned CNT. In this presentation, a directional growth of CNT will be reported. Carbon nanotubes are synthesized using thermal chemical vapor deposition. Temperature and pressure are two important growth parameters for fabricating carbon nanotubes. It is found that the nanotube diameter distribution mainly depends on the growth-temperature. With the substrate surface normal either along or against the gravity vector, different growth orientations of MWCNT are observed by scanning electron microscopy although the Raman spectra are similar for samples synthesized at different locations. The sizes of these carbon nanotubes in each sample are quite uniform and the length of the tube is up to several tens of micrometers. These results suggest the gravitation effects in the growth of long and small diameter CNT.

Zhu, Shen↗

High-Performance Hemofiltration via Molecular Sieving and Ultra-Low Friction in Carbon Nanotube Capillary Membranes

Conventional dialyzer membranes typically comprise of unevenly distributed polydisperse, tortuous, rough pores, embedded in relatively thick ≈20–50 µm polymer layers wherein separation occurs via size exclusion as well as differences in diffusivity of the permeating species. However, transport in such polymeric pores is increasingly hindered as the molecule size approaches the pore dimension, resulting in significant retention of undesirable middle molecules (≥15–60 kDa) and uremic toxins. Enhanced removal of middle molecules is usually accompanied by high albumin loss (≈66 kDa) causing hypoalbuminemia. Here, the scalable bottom-up fabrication of wafer-scale carbon nanotube (CNT) membranes with highly aligned, low-friction, straight-channels/capillaries and narrow pore-diameter distributions (≈0.5–4.5 nm) is demonstrated, to overcome persistent challenges in hemofiltration/hemodialysis. Using fluorescein isothiocyanate (FITC)-Ficoll 70 and albumin in phosphate buffered saline (PBS) as well as in bovine blood plasma, it is shown that CNT membranes can allow for significantly higher hydraulic permeability (more than an order of magnitude when normalized to pore area) than commercial high-flux hemofiltration/hemodialysis membranes (HF 400), as well as greatly enhance removal of middle molecules while maintaining comparable albumin retention. These findings are rationalized via an N-pore transport model that highlights the critical role of molecular flexing and deformation during size-selective transport within nanoscale confinements of the CNTs. In conclusion, the unique transport characteristics of CNTs coupled with size-exclusion and wafer-scale fabrication offer transformative advances for hemofiltration, and the obtained insight into molecular transport can aid advancements in several other bio-systems/applications beyond hemofiltration/hemodialysis.

36 MATERIALS SCIENCE↗

Integrated experimental studies of pore structure and fluid uptake in the Bossier Shale in eastern Texas, USA

Within the Haynesville-Bossier Shale complex, the Bossier Shale has not been extensively studied by either industry and academia, despite it being an unconventional gas reservoir and a potential caprock for carbon storage in the underlaying Haynesville Shale. The lack of knowledge of the complex pore structures and fluid-rock interactions hinders the effective extraction of gas and the characterization of fluid reservoirs and sealing capacity. Integrated experimental studies of pore structure and fluid-rock interactions were conducted in seven Bossier Shale core samples collected in eastern Texas. Petrographic, geochemical, and petrophysical properties such as mineral composition, organic richness, thermal maturity, porosity, pore/pore throat diameter distribution, water-accessible pores, liquid water imbibition, and water vapor adsorption were characterized using complementary approaches of thin-section petrography, scanning electron microscopy, X-ray diffraction, total organic matter, pyrolysis, mercury intrusion porosimetry, nuclear magnetic resonance, (Ultra-) small angle X-rays scattering as well as small angle neutron scattering with deuterated liquids and contrast variation. Further, the results show that the thermally mature Bossier Shales are composed of mixed argillaceous mudstone, mixed mudstone, and mixed carbonate mudstone. The shale contains both organic and inorganic pores, with porosities of 3.24-9.37 %, pore-to-throat ratios of 1.65 to 19.4, and water-accessible pores accounting for 28.7-72.6 % of total pores. Approaches of liquid water imbibition and water vapor adsorption, with and without direct contact of water with shale samples, indicate that liquid water first enters the nano-sized pores under high capillary pressures, and water vapor adsorption is mainly controlled by both clay minerals and pores with diameters less than 10 nm. These findings contribute to a better understanding of pore structures and water-shale interactions and their controlling factors in the Bossier Shale.

58 GEOSCIENCES↗

Physical and Thermodynamic Properties of Secondary Organic Materials for Modeling (Final Technical Report)

Secondary organic material constitutes more than 50% of the submicron component of atmospheric aerosol particles. This organic material is produced by oxidation of biogenic and anthropogenic volatile organic compounds. The physicochemical properties of these aerosol particles and their variability with atmospheric conditions influence many climate-relevant endpoints, such as rates of chemical reactions, production of secondary organic material, number-diameter distributions, direct radiative forcing, and cloud condensation nuclei. The results of the project research highlight a nonlabile-to-labile transition for material representative of anthropogenic secondary organic particulate matter at a threshold humidity range. This behavior differs markedly from materials representing biogenic aerosol sources, which lack such a transition. More specifically, the mass lability of atmospheric organic particulate matter, meaning its tendency to evaporate, is an important property in the mechanisms governing the climate effects. This property is affected by both the volatility and the molecular diffusivity of the constituent organic species. Via a series of laboratory experiments, the project directly determined the mass labilities of films of secondary organic material representative of anthropogenic and biogenic organic particulate matter (PM). The evaporation rates for anthropogenic organic PM increased above a threshold relative humidity (RH) between 20% and 30%, indicating rapid partitioning above a transition RH. Below the threshold, the characteristic time for equilibration was estimated at up to 1 week for a typically sized particle. In contrast, for films representing biogenic PM, no RH threshold was observed, suggesting equilibrium partitioning is rapidly obtained for all RHs. The effective molecular diffusivity for the biogenic case was at least 1000 times greater than that of the anthropogenic case. The results allow for an improved representation of anthropogenic and biogenic secondary organic aerosol formation in climate models. The results of the project also provide new measurements on how organic aerosol particles take up water and serve as cloud condensation nuclei, thus explaining the observed complex thermodynamic behaviors using a simple thermodynamic model. The project results reconciled the discrepancy between sub-saturation hygroscopicity and super-saturation cloud condensation nuclei activity for organic aerosol particles. The key to the explanation is the phase separation between hydrophobic and hydrophilic organics and the induced surface tension lowering. The results are essential for the assessment of the aerosol indirect effect on climate. In more detail, hygroscopic growth and cloud condensation nuclei activation are key processes for accurately modeling the climate impacts of organic particulate matter. Nevertheless, the microphysical mechanisms of these processes remain unresolved. The project results focus on complex thermodynamic behaviors, including humidity-dependent hygroscopicity, diameter-dependent cloud condensation nuclei activity, and liquid-liquid phase separation in the laboratory for biogenically derived secondary organic material representative of similar atmospheric organic particulate matter. These behaviors can be explained by the non-ideal mixing of water with hydrophobic and hydrophilic organic components. The non-ideality-driven liquid-liquid phase separation further enhances water uptake and induces lowered surface tension at high relative humidity, which results in a lower barrier to cloud condensation nuclei activation. By comparison, secondary organic material representing anthropogenic sources does not exhibit complex thermodynamic behavior. The combined results highlight the importance of detailed thermodynamic representations of the hygroscopicity and cloud condensation nuclei activity in models of the Earth’s climate system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self–Sorting of 10–µm–Long Single–Walled Carbon Nanotubes in Aqueous Solution

Single-walled carbon nanotubes (SWCNTs) are a class of 1D nanomaterials that exhibit extraordinary electrical and optical properties. However, many of the fundamental studies and practical applications are stymied by sample polydispersity. SWCNTs are synthesized in bulk with broad structural (chirality) and geometrical (length and diameter) distributions; problematically, all known post-synthetic sorting methods rely on ultrasonication, which cuts SWCNTs into short segments (typically <1 μm). Here it is demonstrated that ultralong (>10 μm) SWCNTs can be efficiently separated from the shorter ones through a solution-phase “self-sorting.” It is shown that thin film transistors fabricated from long semiconducting SWCNTs exhibit a carrier mobility as high as ≈90 cm 2 V –1 s –1 , which is ≈10 times higher than the shorter counterparts and well exceeding other known materials such as organic semiconducting polymers (<1 cm 2 V –1 s –1 ), amorphous silicon (≈1 cm 2 V –1 s –1 ), and nanocrystalline silicon (≈50 cm 2 V –1 s –1 ). Mechanistic studies suggest that this self-sorting relies on the equilibrium between isotropic and liquid crystalline SWCNT phases, which is driven by the solution phase behavior above the cloud point of the isotropic phase, and inversely scales with the SWCNT length. Furthermore, this length-dependent self-sorting technique opens a path to attain the long- sought ultralong, electronically pure carbon nanotube materials through scalable solution processing.

36 MATERIALS SCIENCE↗

Zeolite Nanosheets Stabilize Catalyst Particles to Promote the Growth of Thermodynamically Unfavorable, Small–Diameter Carbon Nanotubes

A challenge in the synthesis of single–wall carbon nanotubes (SWCNTs) is the lack of control over the formation and evolution of catalyst nanoparticles and the lack of control over their size or chirality. Here, zeolite MFI nanosheets (MFI–Ns) are used to keep cobalt (Co) nanoparticles stable during prolonged annealing conditions. Environmental transmission electron microscopy (ETEM) shows that the MFI–Ns can influence the size and shape of nanoparticles via particle/support registry, which leads to the preferential docking of nanoparticles to four or fewer pores and to the regulation of the SWCNT synthesis products. The resulting SWCNT population exhibits a narrow diameter distribution and SWCNTs of nearly all chiral angles, including sub–nm zigzag (ZZ) and near–ZZ tubes. Theoretical simulations reveal that the growth of these unfavorable tubes from unsupported catalysts leads to the rapid encapsulation of catalyst nanoparticles bearing them; their presence in the growth products suggests that the MFI–Ns prevent nanoparticle encapsulation and prologue ZZ and near–ZZ SWCNT growth. Furthermore, these results thus present a path forward for controlling nanoparticle formation and evolution, for achieving size– and shape–selectivity at high temperature, and for controlling SWCNT synthesis.

36 MATERIALS SCIENCE↗

Study of Stratus-Lowering Marine-Fog Events Observed During C-FOG

Two stratus lowering marine fog events observed on 28 September and 04 October 2018 during the Coastal Fog (C-Fog) field campaign that took place offshore of Eastern Canada during 1 September to 6 October 2018 are described. In-situ, profiling and remote sensing observations were made at selected land sites in eastern Newfoundland (NL) and Nova Scotia (NS) as well as aboard the research vessel (R/V) Hugh R. Sharp that cruised in adjoining coastal waters. Synoptic scale analysis showed that both fog episodes were an outcome of the interaction between synoptic-scale surface level low-pressure systems and a contiguous high-pressure system. At the same time, back trajectories revealed that the bulk of the fog layer is formed due to differential advection. Here, the diameter of the fog droplets at the surface gradually decreased from the centre of the fog layer to its leading/trailing edges. The bimodal fog droplet diameter distribution with peaks at 5-10 µm and 20-25 µm provided clues on droplet collision and coalescence processes. The observed difference between microphysical variables and droplet distribution between the two fog events and within same fog layer may have been governed by atmospheric boundary layer conditions (e.g., humidity conditions and turbulence) prevailed in the fog layer. Overall, it is concluded that the life cycle of observed stratus-lowering coastal-fog episodes is dependent on synoptic conditions as well as atmospheric boundary layer characteristics such as stability, cloud top cooling and entrainment.

54 ENVIRONMENTAL SCIENCES↗

Sequence2Self: Self-supervised image sequence denoising of pixel-level spray breakup morphology

Optical imaging of fast and transient phenomena such as the turbulent breakup of liquid sprays exhibit low signal-to-noise ratios due to the limited illumination intensity relative to the short exposure time. Image denoising is required to facilitate physical studies over these data but is challenging due to the absence of clean ground-truths and the stringency of the denoising task (e.g., strong and complex noise, limited resolution, preserving physical fidelity), preventing supervised and existing un-/self-supervised deep learning methods. To this end, Sequence2Self (Seq2S) is proposed, an extension of Self2Self (S2S) to image sequences that leverages both the signal’s spatial and temporal correlation. Seq2S is demonstrated on time-resolved x-ray phase contrast imaging of liquid jet fuel sprays in a gas turbine combustor, which possesses all of challenges detailed above. Experiments are conducted across four fuels with different breakup morphology using various state-of-the-art methods. Overall, many of the methods failed and Seq2S was most successful: (1) Accurate spray structures were reconstructed with consistent evolution across frames void of artifacts. (2) The performance was robust, invariant to the hyperparameter choice. (3) Computational time is short and can be made eligible for real-time denoising. In particular, the images denoised by Seq2S showed spray droplet diameter distributions with near-zero Kullback–Leibler divergence (0.01 ± 0.01) to a cleaner reference, whereas the second best method yielded 0.06 ± 0.03. In conclusion, this suggests that Seq2S can be reliably used prior to subsequent quantitative spray analyses as it retains (if not, improves) the statistical physical properties of the data.

97 MATHEMATICS AND COMPUTING↗

Online ion mobility spectrometry of nanoparticle formation by non-thermal plasma conversion of metal salts in liquid aerosol droplets

The synthesis of nanoparticles by reaction of liquid aerosol droplets containing precursors in a flow-through, atmospheric-pressure, non-thermal plasma offers a continuous, scalable, substrate- and stabilizer-free approach for direct deposition into liquids or onto soft substrates. However, the combination of multiphase and non-equilibrium chemistry makes the process complicated and poorly understood. Here, we present ion mobility spectrometry measurements of liquid water droplets containing silver nitrate passing through an atmospheric-pressure dielectric barrier discharge reactor that allows us to monitor silver nanoparticle formation online for the first time. Mobility diameter distributions were obtained with the plasma on and off, and exhibited a shift, which was related to the degree of conversion of silver nitrate. The silver nanoparticles were also collected and characterized by UV–visible absorbance spectroscopy and transmission electron microscopy to support the online measurements. Importantly, negligible conversion was found when the water was removed by a diffusion dryer, suggesting that the key reducing species are in the liquid phase, such as solvated electrons. Finally, the study demonstrates how ion mobility spectrometry measurements can be applied to provide insight into this approach to nanoparticle synthesis.

42 ENGINEERING↗

A Novel Synthesis Route for Bimetallic CoCr–MCM-41 Catalysts with Higher Metal Loadings. Their Application in the High Yield, Selective Synthesis of Single-Wall Carbon Nanotubes

We present a study on CoCr-MCM-41 catalysts with stable nm-sized particles. The focus is their promoting effect on the synthesis of Single-Wall Carbon Nanotubes (SWNT). Bimetallic CoCr-MCM-41 catalysts were synthesized by combined grafting and incorporation of metals in the framework. This synthesis allowed an increase in the maximum metal loading in the MCM-41 framework while maintaining nm-sized Co particles stable in high-temperature reactive environments. The SWNT yield was increased by more than 100% from the Co-MCM-41 catalyst. Cobalt is responsible for SWNT nucleation. The role of chromium is to anchor small cobalt particles during reduction and prevent their sintering into large unreactive particles. A larger fraction of the cobalt in the bimetallic catalysts becomes available for the SWNT synthesis when compared to the monometallic one, leading to a significant yield increase. Another effect of the addition of Cr was a shift of the SWNT diameter distribution to smaller nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Combined electron microscopy and spectroscopy characterization of as-received, acid purified, and oxidized HiPCO single-wall carbon nanotubes

Single-wall carbon nanotubes (SWCNTs) are very important materials due to their combination of unique structure, dimension, strength, chemical stability, and electronic properties. Nevertheless, SWCNTs from commercial sources usually contain several impurities, which are usually removed by a purification process that includes reflux in acids and strong oxidation. This strong chemical procedure may alter the nanotube properties and it is thus important to control the extent of functionalization and oxidation during the purification procedure. In this report, we provide a comprehensive study of the structure and physical composition of SWCNTs during each step of the purification process. Techniques such as Raman spectroscopy, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy and Infrared spectroscopy were used to track the SWCNTs structure, in terms of length and diameter distribution, and surface chemical modifications during each purification stage.

36 MATERIALS SCIENCE↗

Synthesis of few-walled carbon nanotube-Rh nanoparticles by arc discharge: Effect of selective oxidation

Highly crystalline rhodium (Rh) nanoparticles supported on carbon nanotubes were prepared by selective oxidation method. Carbon nanotubes and FeRh nanoparticles were simultaneously generated in hydrogen arc plasma. The as-grown nanomaterials can be purified by heat treatment in open air and by soaking in HCl. X-ray diffraction and selected area electron diffraction results reveal that as-grown FeRh nanoparticles have a typical chemical CsCl-type structure which can be transformed into a face-centered cubic structure by thermal annealing in the purification process. The purification process is selective toward the removal of the amorphous carbon coating the nanoparticles, and transforms Fe to Fe{sub 2}O{sub 3}. Fe{sub 2}O{sub 3} can be easily dissolved in hydrochloric acid, leaving carbon nanotubes-Rh nanoparticles. Rh nanoparticles with diameters of 2-60 nm are deposited uniformly on the surface of the carbon nanotube bundles. This simple and selective chemistry offers a new process for synthesizing and controlling Fe content in carbon nanotube-FeRh nanoparticles. Highlights: Black-Right-Pointing-Pointer High-crystallinity CNTs and FeRh nanoparticles were simultaneously generated in arc plasma. Black-Right-Pointing-Pointer The diameter distribution of CNTs depends on different gases. Black-Right-Pointing-Pointer Heat treatment in open air and soaking in HCl can convert CNTs-FeRh to CNTs-Rh. Black-Right-Pointing-Pointer The selective oxidation mechanisms of metal nanoparticles and carbon materials differ.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of silicon nanowires using tin catalyst by hot wire chemical vapor processing

Highlights: ► Silicon nanowires are grown by hot wire chemical vapor processing at 400 °C using Sn as catalyst material via VLS. ► For nanowire synthesis Sn nanotemplates are formed with hot wire generated atomic hydrogen. ► The TEM image reveals the crystalline nature of nanowire. - Abstract: Silicon nanowires (SiNWs) have been synthesized at temperatures in the range 300–400 °C by the hot wire chemical vapor processing (HWCVP) using tin nanotemplate. The tin nano-template is formed by hot wire atomic hydrogen treatment of thermally evaporated Sn films (∼300 nm thick) on glass substrates. Silicon nanowires are then grown using hot wire induced dissociation of SiH{sub 4} gas over the nanotemplate. Growth conditions like growth time and temperature were varied to study their effect on the tin nanoparticle size and on the silicon nanowire dimensions thereafter. From the observations, it is clear that the nanowire diameters and lengths depend on the size of nanoparticles and the growth time respectively. Though SiNWs were observed to grow at temperatures as low as 300 °C, nanowires with a narrow diameter distribution were achieved at 400 °C. Raman spectra and transmission electron microscope (TEM) reveal the crystalline nature of the silicon nanowires.

36 MATERIALS SCIENCE↗

Combustion synthesized rod-like nanostructure hematite with enhanced lithium storage properties

Graphical abstract: Fe{sub 2}O{sub 3} nanorods are synthesized by combustion method using alcohol as both solvent and fuel. As an anode material for lithium-ion batteries, the Fe{sub 2}O{sub 3} nanorod electrode delivers good electrochemical performance. - Highlights: • We prepared Fe{sub 2}O{sub 3} nanorod by a facile and powerful combustion method. • The Fe{sub 2}O{sub 3} nanorod shows high capacity, good cycle stability, and rate performance. • Combustion saves time and energy to meet the demand of green and sustainable industry. - Abstract: Fe{sub 2}O{sub 3} nanorods are synthesized by combustion method using alcohol as both solvent and fuel, which is a facile and effective strategy for the large-scale and inexpensive fabrication. The Fe{sub 2}O{sub 3} nanorods are with the well distributed diameters of 20–30 nm and length ranging from 80 to 100 nm. As an anode material for lithium-ion batteries, the Fe{sub 2}O{sub 3} nanorod electrode delivers a high discharge capacity of 761.7 mA h g{sup −1} after 60 cycles at 500 mA g{sup −1}, and 727.2 mA h g{sup −1} at a high current density of 2000 mA g{sup −1}. The good electrochemical performance is attributed to the sufficient contact of active material and electrolyte, large surface area, and short diffusion length of Li{sup +}.

36 MATERIALS SCIENCE↗

Structure of a Venezuelan equine encephalitis virus assembly intermediate isolated from infected cells

Venezuelan equine encephalitis virus (VEEV) is a prototypical enveloped ssRNA virus of the family Togaviridae. To better understand alphavirus assembly, we analyzed newly formed nucleocapsid particles (termed pre-viral nucleocapsids) isolated from infected cells. These particles were intermediates along the virus assembly pathway, and ultimately bind membrane-associated viral glycoproteins to bud as mature infectious virus. Purified pre-viral nucleocapsids were spherical with a unimodal diameter distribution. The structure of one class of pre-viral nucleocapsids was determined with single particle reconstruction of cryo-electron microscopy images. These studies showed that pre-viral nucleocapsids assembled into an icosahedral structure with a capsid stoichiometry similar to the mature nucleocapsid. However, the individual capsomers were organized significantly differently within the pre-viral and mature nucleocapsids. The pre-viral nucleocapsid structure implies that nucleocapsids are highly plastic and undergo glycoprotein and/or lipid-driven rearrangements during virus self-assembly. This mechanism of self-assembly may be general for other enveloped viruses.

60 APPLIED LIFE SCIENCES↗

Measurement of the Dewetting, Nucleation, and Deactivation Kinetics of Carbon Nanotube Population Growth by Environmental Transmission Electron Microscopy

Understanding the collective growth of carbon nanotube (CNT) populations is key to tailoring their properties for many applications. During the initial stages of CNT growth by chemical vapor deposition, catalyst nanoparticle formation by thin-film dewetting and the subsequent CNT nucleation processes dictate the CNT diameter distribution, areal density, and alignment. Here, in this study, we use in situ environmental transmission electron microscopy (E-TEM) to observe the catalyst annealing, growth, and deactivation stages for a population of CNTs grown from a thin-film catalyst. Complementary in situ electron diffraction and TEM imaging show that, during the annealing step in hydrogen, reduction of the iron oxide catalyst is concomitant with changes in the thin-film morphology; complete dewetting and the formation of a population of nanoparticles is only achieved upon the introduction of the carbon source, acetylene. The dewetting kinetics, i.e., the appearance of distinct nanoparticles, exhibits a sigmoidal (autocatalytic) curve with 95% of all nanoparticles appearing within 6 s. After nanoparticles form, they either nucleate CNTs or remain inactive, with incubation times measured to be as small as 3.5 s. Via E-TEM we also directly observe the crowding and self-alignment of CNTs after dewetting and nucleation. In addition, in situ electron energy loss spectroscopy reveals that the collective rate of carbon accumulation decays exponentially. We conclude that the kinetics of catalyst formation and CNT nucleation must both be addressed in order to achieve uniform and high CNT density, and their transient behavior may be a primary cause of the well-known nonuniform density of CNT forests.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗