Search NASA⌕ Search

SEARCH · Search NASA

Results for “diglycolamides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Observation of a promethium complex in solution

Lanthanide rare-earth metals are ubiquitous in modern technologies, but we know little about chemistry of the 61st element, promethium (Pm), a lanthanide that is highly radioactive and inaccessible. Despite its importance, Pm has been conspicuously absent from the experimental studies of lanthanides, impeding our full comprehension of the so-called lanthanide contraction phenomenon: a fundamental aspect of the periodic table that is quoted in general chemistry textbooks. Here we demonstrate a stable chelation of the 147 Pm radionuclide (half-life of 2.62 years) in aqueous solution by the newly synthesized organic diglycolamide ligand. The resulting homoleptic Pm III complex is studied using synchrotron X-ray absorption spectroscopy and quantum chemical calculations to establish the coordination structure and a bond distance of promethium. These fundamental insights allow a complete structural investigation of a full set of isostructural lanthanide complexes, ultimately capturing the lanthanide contraction in solution solely on the basis of experimental observations. Our results show accelerated shortening of bonds at the beginning of the lanthanide series, which can be correlated to the separation trends shown by diglycolamides. The characterization of the radioactive Pm III complex in an aqueous environment deepens our understanding of intra-lanthanide behaviour and the chemistry and separation of the f-block elements.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Examination of the Radiolytic Stability of the GENIORS Solvent

The INL radiolysis test loop system has been employed to evaluate the effects of gamma radiolysis the stability and performance of the GENIORS solvent extraction process. This report describes details and results of the experiments performed and documents completion of milestone M3FT-21IN030101024 “Testing of Radiolytic Stability of m-TDDGA Based Solvent at INL”. The purpose of the proposed dynamic irradiation tests to be performed is to evaluate the radiolytic stability of the GENIORS process solvent for An/Ln recovery under process-like conditions. Recent research efforts within the European Union GENIORS project have focused upon demonstrating additional process improvements. These improvements include simplification of the solvent composition, use of reagents composed of only C, H, O, and N atoms (the CHON principle), identification of a diglycolamide derivative with more favorable Pu loading behavior, and use of an aqueous soluble stripping reagent that is not sulfonated. As a result, a new solvent utilizing dimethyl-N,N,N’,N’-tetradecyl-diglycolamide (cis-mTDDGA) as the An/Ln extractant and the aqueous soluble 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4yl]-pyridine (PTD) as the An/Ln stripping reagent was proposed. The impact of gamma radiolysis upon the efficacy of the GENIORS process solvent was evaluated by determining the americium, europium, and cerium distribution ratios as a function of absorbed dose. The measured distribution ratios demonstrated that the GENIORS solvent did undergo radiolytic degradation. However, at absorbed doses corresponding to realistic process conditions, the extraction and stripping performance of the solvent remains acceptable. Compositional analysis of the irradiated solvent revealed a decrease in the concentration of cis-mTDDGA, which is consistent with the observed changes in metal distribution ratios as a function of absorbed dose.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
DOE OSTI2020

Countercurrent Actinide Lanthanide Separation Process (ALSEP) Demonstration Test with a Simulated PUREX Raffinate in Centrifugal Contactors on the Laboratory Scale

An Actinide Lanthanide Separation Process (ALSEP) for the separation of trivalent actinides (An(III)) from simulated raffinate solution was successfully demonstrated using a 32-stage 1 cm annular centrifugal contactor setup. The ALSEP solvent was composed of a mixture of 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) and N,N,N',N'-tetra-(2-ethylhexyl)-diglycolamide (T2EHDGA) in n-dodecane. Flowsheet calculations and evaluation of the results were done using the Argonne’s Model for Universal Solvent Extraction (AMUSE) code using single-stage distribution data. The co-extraction of Zr(IV) and Pd(II) was prevented using CDTA (trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid) as a masking agent in the feed. For the scrubbing of co-extracted Mo; citrate-buffered acetohydroxamic acid was used. The separation of An(III) from the trivalent lanthanides (Ln(III)) was achieved using citrate-buffered diethylene-triamine-N,N,N',N",N"-pentaacetic acid (DTPA), and Ln(III) were efficiently back extracted using N,N,N',N'-tetraethyl-diglycolamide (TEDGA). A clean An(III) product was obtained with a recovery of 95% americium and curium. The Ln(III) were efficiently stripped; but the Ln(III) product contained 5% of the co-stripped An(III). The carryover of Am and Cm into the Ln(III) product is attributed to too few actinide stripping stages, which was constrained by the number of centrifugal contactors available. Improved separation would be achieved by increasing the number of An strip stages. The heavier lanthanides (Pr, Nd, Sm, Eu, and Gd) and yttrium were mainly routed to the Ln product, whereas the lighter lanthanides (La and Ce) were mostly routed to the raffinate.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Evaluation of two extraction chromatography resins for scandium and titanium separation for medical isotope production

Scandium-47 ( 47 Sc) can be used in nuclear medicine as a therapeutic-diagnostic, or "theragnostic," radioactive medical isotope for cancer detection and treatment. The 47 Sc isotope can be produced through the photonuclear reaction 48 Ti(γ,p) 47 Sc by irradiating enriched 48 Ti target material. The enriched target material necessary for production is costly; 48 TiO 2 costs ~ $\$$1550/g, and targets can be > 50 g ($\$$77,500) to produce medically relevant amounts of 47 Sc. In order to keep costs low, a highly efficient separation of scandium from bulk titanium is desired, along with efficient methods for recycling the target material. Here this research is focused on evaluating efficient methods for the separation of scandium from bulk quantities of titanium using commercially available diglycolamide-based and hydroxamate-based extraction chromatography resins (DGA resin and ZR resin, respectively). The sorption of 47 Sc and Ti on these resins were investigated at varying concentrations of HNO 3 , HCl, H 2 SO 4 , and HF to explore how they might be used in a large-scale production/processing setting.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

Mechanistic Investigation of Co(II) Extraction by TODGA to Aid Nuclear Forensic Separations

Nuclear forensic (NF) analysis supports law enforcement inquiries by analyzing evidence tainted with radioactive substances. Separation techniques can be used to identify and quantify actinides and fission 15 products in post-detonation (PD) debris. Environmental transition metals, also present in PD residues, have been observed to impact critical isotope extractions. For example, radio stable cobalt (Co), ubiquitous in urban environments, particularly in corrosion-resistant alloys, paint-drying agents, dyes, and pigments, can impact the separation of important actinides and fission products. The presented work aims to elucidate the chemistry Q2 governing Co extraction in samples pertinent to PDNF. Chemistry between Co and N,N,N,‘N’-tetraoctyl diglyco- 20 lamide (TODGA), the ligand present in the commercial chromatographic resin diglycolamide (DGA), were studied via solvent and chromatographic extraction and spectroscopic analyses. These results indicate that a tetrahedral Co(II) species is extracted by TODGA from highly acidic (>5M HCl) solutions via a spontaneous entropy-driven reaction. Furthermore, extraction trends in varied acid concentrations are consistent between solvent extraction and chromatographic extraction methods.

activation product↗
DOE OSTI2026

Production and Improved Separation of Therapeutic Radionuclides Tb-161, Er-165, and Lu-177

This project resulted in the synthesis and utility of new solid-phase extractants using diglycolamide (DGA) extractants grafted onto mesoporous silica. We used DGA ligands that offer multidentate coordination sites for lanthanides and offer pre-arranged binding sites that may facilitate radiolanthanide metal binding. Also, the Hunter graduate student worked at University of Utah on production and separation of 161 Tb with high specific activity resulting in a publication. These are reported in the full text upload.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Process Scale-Up of an Energy-Efficient Membrane Solvent Extraction Process for Rare Earth Recycling from Electronic Wastes

This study reports the process scale-up and long-term performance of an energy-efficient and cost-effective membrane solvent extraction (MSX) process for separation and recovery of high purity rare earth oxides (REOs) from scrap permanent magnets (SPMs). Here, the rare earth elements (REEs), including dysprosium, neodymium, and praseodymium, are recovered from SPMs using a neutral extractant, tetraoctyl diglycolamide (TODGA) embedded in a microporous polypropylene hollow fiber membrane module. The MSX process performance is demonstrated with bench scale module with membrane surface area of 1.4 m 2 to industrial scale modules with membrane surface area of up to 20 m2 to enable the processing of up to 1 ton month –1 of SPMs. The purity and the yield of the recovered REOs are >99.5 wt% and >95%, respectively. The average extraction rate of REOs is >10 g m –2 hr –1 . A skid of MSX system is assembled with a membrane area of 40 m 2 . The MSX skid successfully recovers REOs with a capacity of 300 kg REOs/month. Finally, it is determined that the organic phase containing the extractant maintains its performance up to 250 h. The results suggest that the MSX process is an economically viable and environmentally friendly process for separation and recovery of REOs from electronic wastes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Designer Fluorescent Redoxmer Self‐Reports Side Reactions in Nonaqueous Redox Flow Batteries

The state of health (SOH) is a critical measure for evaluating and predicting performance of redox flow batteries (RFBs). However, diagnosing SOH of RFBs is often challenging due to the overwhelming complexity of the electrolytes and associated electrochemical reactions. Designing active molecules or redoxmers that can autonomously exhibit property changes upon specific stimuli may provide a viable way for early diagnosis of SOH. Herein, a dimerized redoxmer, DGL-N-CH 3 , was designed and synthesized by linking blue-green fluorescent monomers through a diglycolamide linker. While DGL-N-CH 3 still maintains similar electrochemical behavior and strong fluorescence, we observe a unique side reaction when cycling DGL-N-CH 3 in H-cells, which leads to a side product, NHCH 3 -BzNSN via linker cleavage. Interestingly, NHCH 3 -BzNSN also emits fluorescence but at a longer wavelength. By taking advantage of this unique fluorescent change that corresponds to the growth of NHCH 3 -BzNSN, we successfully established the capacity decay of DGL-N-CH 3 H-cell cycling, exemplifying a proof-of-concept self-reporting redoxmer design towards in situ SOH monitoring.

25 ENERGY STORAGE↗
DOE OSTI2020

Measurement of distribution coefficients on TODGA resin and development of a group separation for mixed activation and fission product samples

Batch equilibrium experiments were performed to determine the distribution coefficients for Sc, Ir, and Ta on N,N,N’,N’tetraoctyl-1,5-diglycolamide (TODGA) resin in various acid matrices. Distribution coefficients were determined in hydrochloric acid (Sc, Ir), nitric acid (Sc, Ta), and a mixture of nitric acid and 0.2M hydrofluoric acid (Sc, Ir, Ta). The distribution coefficients determined through these experiments were then utilized to create a group separation method for activation products, fission products, and environmental constituents.

Louie, Christina A.↗
DOE OSTI2025

48 Ca(p,pn) 47 Ca linac production for the preparation of a 47 Ca/ 47 Sc generator

Here, the production of 47 Sc via the nuclear reaction 48 Ca(p,pn) 47 Ca→(β-, T 1/2 = 4.54 d) 47 Sc and the assembly of a 47 Ca/ 47 Sc generator system has been investigated at Brookhaven National Laboratory. To produce 47 Ca, a pressed nat CaCl 2 target was irradiated with a proton beam at energy on target of 27.5 MeV at Brookhaven Linac Isotope Producer. Irradiated targets were dissolved in water and then acidified with concentrated HCl before separation using extraction chromatography through a diglycolamide (DGA) resin column. After ingrowth, 47 Sc was collected at >90 % with low contamination from both nonradioactive metals and coproduced radionuclides. A total of four 47 Ca/ 47 Sc separations were performed with 6–7 days between the irradiation and the separation to allow the equilibration of the ingrowing 47 Sc.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

Membrane-based solvent extraction for the recovery of rare earths from phosphate mining process streams

This study reports on the capture of rare earth elements (REEs) from phosphate industry process streams, including phosphoric acid (PA) sludge and phosphogypsum (PG), using a membrane solvent extraction (MSX) process. While MSX has been proven effective for a relatively concentrated feed, its effectiveness for dilute REEs solutions remains unexplored. Investigated PA-sludge and PG particles contain total REEs concentrations of ∼1100 and ∼320 ppm, respectively. Acid leaching, implemented to dissolve the REEs, significantly dilutes the REEs concentration to ∼210 ppm for PA-sludge leachate and ∼60 ppm for PG leachate. These low concentrations, compounded by the higher levels of non-REE ions and radioactive species, uranium (U) and thorium (Th), poses challenges to the MSX process. Here, we demonstrated that N,N,N′,N′-tetraoctyl-diglycolamide (TODGA) selectively binds REEs from a >3 M nitric-acid leachate while effectively rejecting U and Th. Concentrations of light REEs in strip solution were doubled compared to the feed, while heavy REEs were preferentially extracted. Furthermore, >99% purity gypsum, free of U and Th, was precipitated during the acid leaching process, aiding separation by removing significant amounts of non-REEs species (e.g., calcium) prior to the MSX process. Molecular simulations support the experimental data, suggesting preferential separation of heavy over light REEs. Based on these results, a cost-effective integrated process including pretreatment, acid leaching, MSX, and wastewater treatment is proposed for the co-recovery of REEs, phosphoric acid, gypsum, and U. This study shows MSX as a technically and economically feasible process for the recovery of REEs from low-concentration process streams, offering advantages over conventional solvent extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Extraction chromatography of 225 Ac and lanthanides on N,N-dioctyldiglycolamic acid /1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide solvent impregnated resin

The alpha-emitter 225 Ac (t 1/2 = 9.92 d) is currently under development for targeted alpha-particle therapy of cancer, and accelerator production of 225 Ac via proton irradiation of thorium targets requires robust separations of 225 Ac from chemically similar fission product lanthanides. Additionally, the lanthanide elements represent critical components in modern technologies, and radiolanthanides such as 140 Nd (t 1/2 = 3.37 d) also have potential application in the field of nuclear medicine. The ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Bmim][NTf 2 ]), combined with the diglycolamide extractant, N,N-dioctyldiglycolamic acid (DODGAA), was adsorbed on macroporous resin support to produce a solvent impregnated resin (SIR) that was investigated for separations of 225 Ac and lanthanides. The equilibrium distribution coefficients (Kd) of the rare earth elements (Sc(III), Y(III), Ln(III)), 225 Ac(III), Th(IV), and U(VI) on the prepared DODGAA/[Bmim][NTf 2 ]-SIR were determined from batch adsorption experiments in HCl and HNO 3 media. The DODGAA/[Bmim][NTf2]-SIR exhibited preferential uptake of the heavier lanthanide elements while allowing for the separation of the lighter lanthanides. Column separations utilizing the DODGAA/[Bmim][NTf 2 ]-SIR were effective at separating the lighter lanthanides from each other, and separating 225 Ac from a mixture of lanthanides, 213 Bi, and 225 Ra without the need for additional complexing agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dioctyl ether radiolysis under used nuclear fuel reprocessing conditions: Foundational knowledge for the development of sacrificial ligand grafts

Radiation-induced ligand destruction and concomitant degradation product formation is unavoidable under envisioned used nuclear fuel reprocessing conditions, and ultimately limits the recyclability of a given solvent system formulation. With this in mind, a novel approach to ligand innovation for advanced separations processes is in the design of tailored “protomolecules,” which when exposed to ionizing radiation undergo desired chemical transformations, thereby allowing for a reprocessing solvent system to advantageously evolve with absorbed radiation dose. Here we provide foundational knowledge for the time-resolved (electron pulse) and steady-state (cobalt-60 gamma) radiolytic behavior of dioctyl ether, a protomolecule grafting surrogate. Gamma irradiation of single-phase solutions of dioctyl ether (5–100 vol.%) in n-dodecane resulted in the loss of dioctyl ether (G = -0.72 µmol J –1 ) and the formation of octane (G = 0.11 µmol J –1 ) and octanol (G = 0.15 µmol J –1 ) degradation products, the latter of which is a known reprocessing phase modifier and radioprotectant. Further, these radiation-induced changes were attributed to direct radiation effects, for more concentrated dioctyl ether solutions, and indirect radiation effects, predominantly driven by the reaction of dioctyl ether with the dodecane radical cation, for which we report a second-order rate coefficient of k = (1.53 ± 0.05) × 10 10 L mol –1 s –1 . Under typical biphasic extraction (4.0 mol L –1 HNO 3 ) and strip (0.1 mol L –1 HNO 3 ) reprocessing conditions, gamma irradiation of 5 vol.% dioctyl ether solvent systems afforded negligible change in the rate of parent molecule destruction but promoted significant differences in the radiolytic behavior of its degradation products. These differences are attributed to their respective interactions with [dioctyl ether/HNO 3 /H 2 O] and [octanol/HNO 3 /H 2 O] adducts extracted into the organic phase. Overall, these results support the grafting of ether linkages to advanced separations ligands (e.g., modified diglycolamides).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Characterization of the ALSEP Process at Equilibrium: Speciation and Stoichiometry of the Extracted Complex

We have determined the identity of the complexes extracted into the ALSEP process solvent from solutions of nitric acid. The ALSEP process is a new solvent extraction separation designed to separate americium and curium from trivalent lanthanides in irradiated nuclear fuel. ALSEP employs a mixture of two extractants, 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) and N,N,N',N'-tetra(2-ethylhexyl)diglycolamide (TEHDGA) in n-dodecane, which makes it difficult to ascertain the nature of the extracted metal complexes. It is often asserted that the weak acid extractant HEH[EHP] does not participate in the extracted complex under ALSEP extraction conditions (2–4 M HNO 3 ). However, the analysis of the Am extraction equilibria, Nd absorption spectra, and Eu fluorescence emission spectra of metal-loaded organic phases argues for the participation of HEH[EHP] in the extracted complex despite the high acidity of the aqueous phases. The extracted complex was determined to contain fully protonated molecules of HEH[EHP] with an overall stoichiometry of M(TEHDGA) 2 (HEH[EHP]) 2 ·3NO 3 . Computations also demonstrate that replacing one TEHDGA molecule with one (HEH[EHP]) 2 dimer is likely energetically favorable compared to Eu(TEHDGA) 3 ·3NO 3 , whether the HEH[EHP] dimer is monodentate or bidentate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Low and High LET Degradation Studies of Metal-Loaded Organic Phase Ligands in the ALSEP Process

Organic solutions comprising the Actinide Lanthanide Separation Process (ALSEP) solvent consisting of 0.5 M 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) and 0.05 M N,N,N’,N’-tetra(2-ethylhexyl)diglycolamide (T2EHDGA) in n-dodecane were subjected to low LET and high LET irradiation before and after equilibration with an aqueous phase of 3 M HNO 3 . Degradation dose constants revealed greater ligand degradation due to gamma irradiation than alpha irradiation for both ligands. Furthermore, equilibration with nitric acid did not have a significant impact on ligand degradation for either irradiation source. Identified degradation products were similar for both gamma and alpha irradiation and occurred mostly through the rupture of the N–C carbonyl and C–O ether bonds for T2EHDGA and the C–Oether bond in HEH[EHP]. Acid contact appears to alter the degradation pathway by favoring the formation of higher molecular weight recombination products. Furthermore, mixed T2EHDGA-HEH[EHP]-NO 3 complexes were formed with Nd(III) after extraction from 3 M HNO 3 , and low LET gamma irradiation of the Nd(III) loaded organic solution produced similar degradation products as the organic solution absent of Nd(III). Interestingly, and likely due to the greater radiolytic susceptibility of T2EHDGA than HEH[EHP], a HEH[EHP]-Nd(III) complex appears to form as the T2EHDGA degrades with increasing absorbed dose.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Mark-18A Cold Runs

The Savannah River National Laboratory (SRNL) is tasked by the National Nuclear Security Administration (NNSA) to recover highly valued isotopes from irradiated Mark-18A (Mk-18A) targets. The Savannah River Site (SRS) has sixty-five Mk-18A targets available for the recovery of the high valued materials. The sixty-five Mk-18A targets are currently stored in the L-Area Basin and will be removed one at a time and individually transported to SRNL. Upon receipt at SRNL, the Mk-18A target material will be removed from the confinement, dissolved, chemically separated, and calcined to a stable oxide. The flowsheet is designed to recover the plutonium as well as the trivalent actinides. The remaining unrecovered material will be discarded to the high activity drain (HAD) system in SRNL. A specially designed cask was procured for transport of the targets from L-Area to SRNL. Once received at SRNL, the targets will be loaded into the back of Cell 7 and resized as they enter the cell. The resized targets (1/4 lengths) will then be processed one at a time through the following processes: caustic dissolution and filtration; acidic dissolution and filtration, Reillex anion exchange, diglycolamide (DGA) cation exchange; and DGA calcination. This processing will result in two product streams. The first is an aqueous plutonium solution which will be removed from the shielded cells and taken to a glovebox for further purification and conversion to an oxide. The second is a calcined oxide containing the Am and Cm as well as other lanthanide fission products which will be removed from the shielded cells using a bagless transfer system. Both materials will be packaged for shipment to Oak Ridge National Laboratory (ORNL). All equipment to carry out this process was designed, procured or fabricated, and installed in a mock-up facility (716-4A) at SRS to allow for simulation testing in a non-radioactive area. This equipment was then dismantled and transferred from 716-4A to 773-A and installed in the SRNL Shielded Cells. After installation in the shielded cells facility testing was performed using water followed by surrogates and cold chemicals. Issues were identified during these evaluations, including equipment issues as well as technical challenges. Many of the issues were rectified during performance of the cold runs, and the remaining have a resolution identified. Table ES-1 provides a summary of all issues identified during the cold run operations, as well as the status and identified resolutions to outstanding issues.

07 ISOTOPE AND RADIATION SOURCES↗