Search NASA⌕ Search

SEARCH · Search NASA

Results for “doppler frequency estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Multipath induced errors in meteorological Doppler/interferometer location systems

One application of an RF interferometer aboard a low-orbiting spacecraft to determine the location of ground-based transmitters is in tracking high-altitude balloons for meteorological studies. A source of error in this application is reflection of the signal from the sea surface. Through propagating and signal analysis, the magnitude of the reflection-induced error in both Doppler frequency measurements and interferometer phase measurements was estimated. The theory of diffuse scattering from random surfaces was applied to obtain the power spectral density of the reflected signal. The processing of the combined direct and reflected signals was then analyzed to find the statistics of the measurement error. It was found that the error varies greatly during the satellite overpass and attains its maximum value at closest approach. The maximum values of interferometer phase error and Doppler frequency error found for the system configuration considered were comparable to thermal noise-induced error.

Wallace, R. G.↗
NASA NTRS1987

Atmosphere dynamic processes structure at 80-105 km altitude

Determination of wind velocity by means of Doppler meteor radars is based on the assumption that an ionized meteor trail drifts together with the neutral atmosphere. From the Doppler frequency shift it is possible to estimate the radial velocity of the trail drift. Conversion of the recorded radial velocity to the true wind velocity vector in the given space region depends both on the radar technical parameters and the chosen atmospheric motion model. The atmospheric dynamic processes structure is considered.

Kalchenko, B. V.↗
NASA NTRS1992

SAR processing based on the exact two-dimensional transfer function

The two-dimensional transfer functions of several synthetic aperture radar (SAR) focusing algorithms are derived considering the spaceborne SAR environments. The formulation includes the factors of the earth rotation and the antenna squint angles. The resultant transfer functions are explicitly expressed in terms of Doppler centroid frequency and Doppler frequency rate, which can be accurately estimated from the SAR data. Point target simulation results show that the algorithm based on the two-dimensional Fourier transformation outperforms the one-dimensional one for processing data acquired from high squint angles. The two-dimensional Fourier transformation approach appears to be a viable and simple solution for the processor design of future spaceborne SAR systems.

Chang, C. Y.↗
NASA NTRS1994

Special relativity effects for space-based coherent lidar experiments

There is a great need to develop a system that can measure accurately atmospheric wind profiles because an accurate data of wind profiles in the atmosphere constitutes single most input for reliable simulations of global climate numerical methods. Also such data helps us understand atmospheric circulation and climate dynamics better. Because of this need for accurate wind measurements, a space-based Laser Atmospheric Winds Sounder (LAWS) is being designed at MSFC to measure wind profiles in the lower atmosphere of the earth with an accuracy of 1 m/s at lower altitudes to 5m/s at higher altitudes. This system uses an orbiting spacecraft with a pulsed laser source and measures the Doppler shift between the transmitted and received frequencies to estimate the atmospheric wind velocities. If a significant return from the ground (sea) is possible, the spacecraft speed and height are estimated from it and these results and the Doppler shift are then used to estimate the wind velocities in the atmosphere. It is expected that at the proposed wavelengths, there will be enough backscatter from the aerosols but there may no be significant return from the ground. So a coherent (heterodyne) detection system is being proposed for signal processing because it can provide high signal to noise ratio and sensitivity and thus make the best use of low ground return. However, for a heterodyne detection scheme to provide the best results, it is important that the receiving aperture be aligned properly for the proposed wind sounder, this amounts to only a few microradians tolerance in alignment. It is suspected that the satellite motion relative to the ground may introduce errors in the order of a few microradians because of special relativity. Hence, the problem of laser scattering off a moving fixed target when the source and receiver are moving, which was not treated in the past in the literature, was analyzed in the following, using relativistic electrodynamics and applied to the case of the space-based coherent lidar, assuming flat ground. Here an interest in developing analytical expression for the location of the receiving point for the return with respect to the satellite, receiving angle and Doppler shift in frequency and amount of tip, all as measured in the satellite moving coordinate system and the diffuse scattering angle at the ground which does not require any compensation. All the three cases of retro-reflection, specular reflection and diffuse scattering by the ground should be treated though retro-reflection and diffuse scattering are more important.

Raogudimetla, V. S.↗
NASA NTRS2008

Reducing Spaceborne-Doppler-Radar Rainfall-Velocity Error

A combined frequency-time (CFT) spectral moment estimation technique has been devised for calculating rainfall velocity from measurement data acquired by a nadir-looking spaceborne Doppler weather radar system. Prior spectral moment estimation techniques used for this purpose are based partly on the assumption that the radar resolution volume is uniformly filled with rainfall. The assumption is unrealistic in general but introduces negligible error in application to airborne radar systems. However, for spaceborne systems, the combination of this assumption and inhomogeneities in rainfall [denoted non-uniform beam filling (NUBF)] can result in velocity measurement errors of several meters per second. The present CFT spectral moment estimation technique includes coherent processing of a series of Doppler spectra generated in a standard manner from data over measurement volumes that are partially overlapping in the along-track direction. Performance simulation of this technique using high-resolution data from an airborne rain-mapping radar shows that a spaceborne Ku-band Doppler radar operating at signal-to-noise ratios greater than 10 dB can achieve root-mean-square accuracy between 0.5 and 0.6 m/s in vertical-velocity estimates.

Tanelli, Simone↗
NASA NTRS2019

A Frequency Diversity Algorithm for Extending the Radar Doppler Velocity Nyquist Interval

Compact millimeter wavelength radars have been widely used for applications such as remote sensing of clouds, guidance avionics and recently, automotive navigation. However, the short wavelength of these radars limit their maximum unambiguous Doppler velocity. A common solution to this problemis to subsequently unfold the Doppler velocity estimate with the staggered pulse repetition time (PRT) algorithm, which requires two different PRTs to be employed in sequence. This work investigates a novel and potentially more rapid method to extend the Doppler velocity Nyquist interval. The investigated algorithm uses a pair of frequency diverse pulses separated by a short time lag for Doppler velocity estimation while the unambiguous range still corresponds to the pulse repetition time employed.

V Venkatesh↗
NASA NTRS1977

Lunar gravity - A long-term Keplerian rate method

Nearside tracking data from Apollo subsatellites and Lunar Orbiter 5 are used to construct a model of the farside lunar gravity field. An indirect method of calculating the average effect of all the gravity anomalies which affect spacecraft orbits is reduced to a linear estimation problem by eliminating the integration of spacecraft dynamics. Doppler frequency shifts between the lunar satellite and earth-based tracking station are used to measure the line of sight velocity component between the orbiter and the tracker; gravity determination is then performed in a weighted least squares estimator which employs the orbital rates as data and formulates the normal equations using the associated Keplerian state. Simulations performed demonstrate that farside gravity features can be economically determined by use of gravity estimates obtained from long-period models of nearside orbiting tracks.

Ferrari, A. J.↗
NASA NTRS1993

Cramer-Rao Bound for Gaussian Random Processes and Applications to Radar Processing of Atmospheric Signals

Calculations of the exact Cramer-Rao Bound (CRB) for unbiased estimates of the mean frequency, signal power, and spectral width of Doppler radar/lidar signals (a Gaussian random process) are presented. Approximate CRB's are derived using the Discrete Fourier Transform (DFT). These approximate results are equal to the exact CRB when the DFT coefficients are mutually uncorrelated. Previous high SNR limits for CRB's are shown to be inaccurate because the discrete summations cannot be approximated with integration. The performance of an approximate maximum likelihood estimator for mean frequency approaches the exact CRB for moderate signal to noise ratio and moderate spectral width.

Frehlich, Rod↗
NASA NTRS2003

Navigation Concepts for the James Webb Space Telescope

This paper evaluates the performance that can be achieved using candidate ground and onboard navigation approaches for operation of the James Webb Space Telescope, which will be in an orbit about the Sun-Earth L2 libration point. The ground navigation approach processes standard range and Doppler measurements from the Deep Space Network The onboard navigation approach processes celestial object measurements and/or ground-to- spacecraft Doppler measurements to autonomously estimate the spacecraft s position and velocity and Doppler reference frequency. Particular attention is given to assessing the absolute position and velocity accuracy that can be achieved in the presence of the frequent spacecraft reorientations and momentum unloads planned for this mission. The ground navigation approach provides stable navigation solutions using a tracking schedule of one 30-minute contact per day. The onboard navigation approach that uses only optical quality celestial object measurements provides stable autonomous navigation solutions. This study indicates that unmodeled changes in the solar radiation pressure cross-sectional area and modeled momentum unload velocity changes are the major error sources. These errors can be mitigated by modeling these changes, by estimating corrections to compensate for the changes, or by including acceleration measurements.

Long, Anne↗
NASA NTRS2004

A Method of Estimating Low Turbulence Levels in Near Real Time Using Laser Anemometry

Laser anemometry was used to make two independent measurements of the flow velocity by capturing individual Doppler signals with high-speed digitizing boards. The two independent measurements were cross-correlated to reduce the contribution of photo detector shot noise on the frequency determination and subsequently on the turbulence estimate. In addition, criteria were developed to eliminate "bad" Doppler bursts from the data set, which then allowed reasonable low turbulence estimates to be made. The laser anemometer measurements were obtained at the inlet of an annular cascade and at the exit of a flow calibration nozzle and were compared with hot-wire data.

Goldman, Louis J.↗
NASA NTRS1986

High dynamic global positioning system receiver

A Global Positioning System (GPS) receiver having a number of channels, receives an aggregate of pseudorange code time division modulated signals. The aggregate is converted to baseband and then to digital form for separate processing in the separate channels. A fast fourier transform processor computes the signal energy as a function of Doppler frequency for each correlation lag, and a range and frequency estimator computes estimates of pseudorange, and frequency. Raw estimates from all channels are used to estimate receiver position, velocity, clock offset and clock rate offset in a conventional navigation and control unit, and based on the unit that computes smoothed estimates for the next measurement interval.

Hurd, W. J.↗
NASA NTRS1996

A study of GPS measurement errors due to noise and multipath interference for CGADS

This report describes a study performed by the Colorado Center for Astrodynamics Research (CCAR) on GPS measurement errors in the Codeless GPS Attitude Determination System (CGADS) due to noise and multipath interference. Preliminary simulation models fo the CGADS receiver and orbital multipath are described. The standard FFT algorithms for processing the codeless data is described and two alternative algorithms - an auto-regressive/least squares (AR-LS) method, and a combined adaptive notch filter/least squares (ANF-ALS) method, are also presented. Effects of system noise, quantization, baseband frequency selection, and Doppler rates on the accuracy of phase estimates with each of the processing methods are shown. Typical electrical phase errors for the AR-LS method are 0.2 degrees, compared to 0.3 and 0.5 degrees for the FFT and ANF-ALS algorithms, respectively. Doppler rate was found to have the largest effect on the performance.

Axelrad, Penina↗
NASA NTRS1986

First results from the Giotto radio-science experiment

A definite deceleration of the comet probe Giotto due to drag in the comet Halley atmosphere has been noted by means of Doppler and ranging measurements based on the radio signals of the Giotto spacecraft. The total radial velocity change is 16.7 cm/s over a 100-s interval; this corresponds to a Doppler frequency of 4.7 Hz. This velocity change is used to estimate a total cometary mass striking the spacecraft of between 0.1 and 1.0 g.

Edenhofer, P.↗
NASA NTRS1972

The estimation of nonstationary spectra from moving acoustic source distributions.

It is shown that the Blackman-Tukey estimation procedure provides a natural estimate of a nonstationary spectrum defined in terms of the acoustic sources. The pressure field from the moving source distribution is discussed together with the estimation procedure. The spectrum can be considered as a time-dependent partition of the variance of the pressure field over a Doppler shifted continuum of frequencies. It is found that the effect of nonstationarity on the bias and variance of the estimate is small in cases of practical interest, provided sources directionality is excluded.

Mcdaid, E.↗
NASA NTRS2021

Relationship between Horizontal Wind Velocity and Normalized Surface Cross Section Using Data from the HIWRAP Dual-Frequency Airborne Radar

The High-Altitude Imaging Wind and Rain Airborne Profiler (HIWRAP) dual-frequency conically scanning airborne radar provides estimates of the range-profiled mean Doppler and backscattered power from the precipitation and surface. A velocity–azimuth display analysis yields near-surface estimates of the mean horizontal wind vector υh in cases in which precipitation is present throughout the scan. From the surface return, the normalized radar cross section (NRCS) is obtained, which, by a method previously described, can be corrected for path attenuation. Comparisons between υh and the attenuation-corrected NRCS are used to derive transfer functions that provide estimates of the wind vector from the NRCS data under both rain and rain-free conditions. A reasonably robust transfer function is found by using the mean NRCS (⟨NRCS⟩) over the scan along with a filtering of the data based on a Fourier series analysis of υh and the NRCS. The approach gives good correlation coefficients between υh and ⟨NRCS⟩ at Ku band at incidence angles of 30° and 40°. The correlation degrades if the Ka-band data are used rather than the Ku band.

R Meneghini↗
NASA NTRS1990

Analysis and improved design considerations for airborne pulse Doppler radar signal processing in the detection of hazardous windshear

High resolution windspeed profile measurements are needed to provide reliable detection of hazardous low altitude windshear with an airborne pulse Doppler radar. The system phase noise in a Doppler weather radar may degrade the spectrum moment estimation quality and the clutter cancellation capability which are important in windshear detection. Also the bias due to weather return Doppler spectrum skewness may cause large errors in pulse pair spectral parameter estimates. These effects are analyzed for the improvement of an airborne Doppler weather radar signal processing design. A method is presented for the direct measurement of windspeed gradient using low pulse repetition frequency (PRF) radar. This spatial gradient is essential in obtaining the windshear hazard index. As an alternative, the modified Prony method is suggested as a spectrum mode estimator for both the clutter and weather signal. Estimation of Doppler spectrum modes may provide the desired windshear hazard information without the need of any preliminary processing requirement such as clutter filtering. The results obtained by processing a NASA simulation model output support consideration of mode identification as one component of a windshear detection algorithm.

Lee, Jonggil↗
NASA NTRS1994

Calibration of TOPEX/POSEIDON at Platform Harvest

We present estimates for the mean bias of the TOPEX/POSEIDON NASA altimeter (ALT) and the Centre National d'Etudes Spatiales altimeter (SSALT) using in-situ data gathered at Platform Harvest during the first 36 cycles of the mission. Data for 21 overflights of the ALT and six overflights of the SSALT have been analyzed. The analysis includes an independent assessment of in-situ measurements of sea level, the radial component of the orbit, wet tropospheric path delay, and ionospheric path delay. (The sign convention used is such that, to correct the geophysical data record values for sea level, add the bias algebraically. Unless otherwise stated, the uncertainty in a given parameter is depicted by +/- sigma(sub x), where sigma(sub x) is the sample standard deviation of x about the mean.) Tide gauges at Harvest provide estimates of sea level with an uncertainty of +/- 1.5 cm. The uncertainty in the radial component of the orbit is estimated to be +/- 1.3 cm. In-situ measurements of tropopsheric path delay at Harvest compare to within +/- 1.3 cm of the TOPEX/POSEIDON microwave radiometer, and in-situ measurements of the ionospheric path delay compare to within -0.4 +/- 0.7 cm of the dual-frequency ALT and 1.1 +/- 0.6 cm of Doppler orbitography and radiopositioning integrated by satellite. We obtain mean bias estimates of -14.5 +/- 2.9 cm for the ALT and +0.9 +/- 3.1 cm for the SSALT (where the uncertainties are based on the standard deviation of the estimated mean (sigma(sub bar x/y), which is derived from sample statistics and estimates for errors that cannot be observed). These results are consistent with independent estimates for the relative bias between the two altimeters. A linear regression applied to the complete set of data shows that there is a discernable secular trend in the time series for the ALT bias estimates. A preliminary analysis of data obtained through cycle 48 suggests that the apparent secular drift may be the result of a poorly sampled annual signal.

Christensen, E. J.↗
NASA NTRS2023

NASA’s Atmosphere Observing System (AOS), From A Precipitation Perspective

NASA is developing the Atmosphere Observing System (AOS) mission as part of its Earth System Observatory (ESO) in response to priorities identified in the 2017 Earth Science Decadal Survey. AOS addresses the Decadal Survey’s call for missions measuring the targeted observables “clouds, convection, and precipitation”; “aerosol and cloud radiative properties”, and “aerosol vertical profiles”. AOS is currently in Phase A, the concept and technology development phase, with plans for satellite launches in the late 2020’s and early 2030’s, and suborbital measurements to include field campaigns after those satellite launches. Key precipitation-related instrumentation includes Doppler radars capable of measuring clouds and precipitation, and passive microwave radiometers with channels between 89-700 GHz. Other instrumentation includes dual-wavelength backscatter lidars, a multi-wavelength and multi-angle polarimeter, a far infrared imaging radiometer, and aerosol and moisture limb sounders that will contribute to studies of coupled aerosol-cloud-precipitation processes. From the perspective of precipitation science, a Ku-band Doppler radar in a 55° inclined orbit provided by JAXA will continue the heritage of precipitation radar measurements made by the Tropical Rainfall Measuring Mission (TRMM) and Global Precipitation Mission (GPM), while adding information about Doppler-derived particle vertical motions. With assumptions about particle terminal velocities, the Doppler measurements will enable estimates of the vertical air motion in storms. A higher frequency (W and/or Ka band) radar on a satellite in a polar sun-synchronous orbit will add similar information with greater sensitivity to clouds and to light precipitation. Passive microwave radiometers for AOS will be less capable than those from TRMM and GPM from a precipitation-measurement perspective, but more capable of adding information about cloud processes. Synergies among these and other instruments are expected to advance process-level understanding of aerosols, clouds, and precipitation.

Daniel J Cecil↗