Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic surface tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Dynamic Tuning of a Thin Film Electrocatalyst by Tensile Strain

We report the ability to tune the catalytic activities for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) by applying mechanical stress on a highly n-type doped rutile TiO 2 films. We demonstrate through operando electrochemical experiments that the low HER activity of TiO 2 can reversibly approach those of the state-of-the-art non-precious metal catalysts when the TiO2 is under tensile strain. At 3% tensile strain, the HER overpotential required to generate a current density of 1 mA/cm 2 shifts anodically by 260 mV to give an onset potential of 125 mV, representing a drastic reduction in the kinetic overpotential. A similar albeit smaller cathodic shift in the OER overpotential is observed when tensile strain is applied to TiO 2 . Results suggest that significant improvements in HER and OER activities with tensile strain are due to an increase in concentration of surface active sites and a decrease in kinetic and thermodynamics barriers along the reaction pathway(s). Our results highlight that strain applied to TiO 2 by precisely controlled and incrementally increasing (i.e. dynamic ) tensile stress is an effective tool for dynamically tuning the electrocatalytic properties of HER and OER electrocatalysts relative to their activities under static conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Dirac surface state–modulated spin dynamics in a ferrimagnetic insulator at room temperature

This work demonstrates markedly modified spin dynamics of magnetic insulator (MI) by the spin momentum–locked Dirac surface states of the adjacent topological insulator (TI), which can be harnessed for spintronic applications. As the Bi concentration x is systematically tuned in 5-nm-thick (Bi x Sb 1-x ) 2 Te 3 TI films, the weight of the surface relative to bulk states peaks at x = 0.32 when the chemical potential approaches the Dirac point. At this concentration, the Gilbert damping constant of the precessing magnetization in 10-nm-thick Y 3 Fe 5 O 12 MI films in the MI/TI heterostructures is enhanced by an order of magnitude, the largest among all concentrations. In addition, the MI acquires additional strong magnetic anisotropy that favors the in-plane orientation with similar Bi concentration dependence. These extraordinary effects of the Dirac surface states distinguish TI from other materials such as heavy metals in modulating spin dynamics of the neighboring magnetic layer.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Gradient Based Subgrid-Scale Parameterization for Ocean Mesoscale Eddies

Mesoscale eddies play an important role in transport of heat and biogeochemical tracers in the global ocean circulation. Resolving these energetic eddies, however, is challenging in ocean general circulation models (OGCM) because it requires a horizontal grid spacing of ≲1/8° that is computationally expensive. As a result, we are required to parameterize mesoscale eddy effects on large-scale ocean flows. In this work, we introduce a new subgrid-scale (SGS) model that is developed based on a Taylor series expansion of resolved variables to parameterize subgrid mesoscale eddy transports and momentum fluxes in OGCM. We have performed an a priori study to evaluate the performance of our new gradient model using high-resolution ocean simulations. Our results show that the gradient model well predicts the actual SGS thickness fluxes in the zonal and meridional directions in coarse-resolution simulations with the grid spacing ≳1/4°. The unresolved kinetic energy at the ocean surface is also skillfully estimated. More importantly, unlike current mesoscale eddy parameterizations, which are mainly developed based on an assumption of flat bottom ocean, our new SGS model can capture the structure of unresolved standing meanders at the ocean surface. We have also developed a dynamic procedure for setting in non-dimensional parameters in our new parameterization through a non-ad hoc and tuning-free method. Overall, this work suggests that implementing the gradient model in OGCM can improve the model accuracy with an affordable computational cost in eddy-permitting and non-eddying simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Influence of the Graft Length on Nanocomposite Structure and Interfacial Dynamics

Both the dispersion state of nanoparticles (NPs) within polymer nanocomposites (PNCs) and the dynamical state of the polymer altered by the presence of the NP/polymer interfaces have a strong impact on the macroscopic properties of PNCs. In particular, mechanical properties are strongly affected by percolation of hard phases, which may be NP networks, dynamically modified polymer regions, or combinations of both. In this article, the impact on dispersion and dynamics of surface modification of the NPs by short monomethoxysilanes with eight carbons in the alkyl part (C 8 ) is studied. As a function of grafting density and particle content, polymer dynamics is followed by broadband dielectric spectroscopy and analyzed by an interfacial layer model, whereas the particle dispersion is investigated by small-angle X-ray scattering and analyzed by reverse Monte Carlo simulations. NP dispersions are found to be destabilized only at the highest grafting. The interfacial layer formalism allows the clear identification of the volume fraction of interfacial polymer, with its characteristic time. The strongest dynamical slow-down in the polymer is found for unmodified NPs, while grafting weakens this effect progressively. The combination of all three techniques enables a unique measurement of the true thickness of the interfacial layer, which is ca. 5 nm. Finally, the comparison between longer (C 18 ) and shorter (C 8 ) grafts provides unprecedented insight into the efficacy and tunability of surface modification. It is shown that C 8 -grafting allows for a more progressive tuning, which goes beyond a pure mass effect.

36 MATERIALS SCIENCE↗
DOE OSTI2025

In Situ/Operando Probing of Dynamic Phase Structures of Alumina‐Supported Ultrasmall Copper‐Gold Alloy Nanoparticles Under Reaction Conditions

Abstract The ability to control phase structures and surface sites of ultrasmall alloy nanoparticles under reaction conditions is essential for preparing catalysts by design. This is, however, challenging due to limited understanding of the atomic‐scale phases and their correlation with the ensemble‐averaged structures and activities of catalysts during catalytic reactions. We reveal here a dynamic structural stability of alumina‐supported ultrasmall and equiatomic copper‐gold alloy nanoparticles under reaction conditions as a model system in the in situ/operando study. In situ atomic‐scale morphological tracking under oxygen reveals temperature‐dependent dynamic crystalline‐amorphous dual‐phase structures, showing dynamic stability over an elevated temperature range. This atomic‐scale dynamic phase stability coincides with a “conversion plateau” observed for carbon monoxide oxidation on the catalyst. It is substantiated by the stable lattice ordering/disordering structures and surface sites with oscillatory characteristics shown by operando ensemble‐average structural tracking of the catalyst during the oxidation reaction. The understanding of the atomic‐scale dynamic phase structures in correlation with the ensemble‐average dynamic ordering/disordering phase structures and surface sites provides fresh insights into the unique synergy of the supported alloy nanoparticles. This understanding has implications for the design and structural tuning of active and stable ultrasmall alloy catalysts under elevated temperatures.

Chemistry↗
DOE OSTI2024

Hierarchical Ion Interactions in the Direct Air Capture of CO 2 at Air/Aqueous Interfaces

The direct air capture (DAC) of CO 2 using aqueous solvents is plagued by slow kinetics and interfacial barriers that limit effectiveness in combating climate change. Functionalizing air/aqueous surfaces with charged amphiphiles shows promise in accelerating DAC; however, insight into these interfaces and how they evolve in time remains poorly understood. Specifically, competitive ion interactions between DAC reagents and reaction products feedback onto the interfacial structure, thereby modulating interfacial chemical composition and overall function. In this work, we probe the role of glycine amino acid anions (Gly - ), an effective CO 2 capture reagent, that promotes the organization of cationic oligomers at air/aqueous interfaces. These surfaces are probed with vibrational sum frequency generation spectroscopy and molecular dynamics simulations. Our findings demonstrate that the competition for surface sites between Gly - and captured carbonaceous anions (HCO 3 - , CO 3 2 -, carbamates) drives changes in surface hydration, which in turn tunes oligomer ordering. This phenomenon is related to a hierarchical ordering of anions at the surface that are electrostatically attracted to the surface and their ability to compete for interfacial water. These results point to new ways to tune interfaces for DAC via stratification of ions based on relative surface propensities and specific ion effects.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Tuning Confinement in Colloidal Silicon Nanocrystals with Saturated Surface Ligands

The optical properties of silicon nanocrystals (Si NCs) are a subject of intense study and continued debate. In particular, Si NC photoluminescence (PL) properties are known to depend strongly on the surface chemistry, resulting in electron-hole recombination pathways derived from the Si NC band-edge, surface-state defects, or combined NC-conjugated ligand hybrid states. In this Letter, we perform a comparison of three different saturated surface functional groups - alkyls, amides, and alkoxides - on nonthermal plasma-synthesized Si NCs. We find a systematic and size-dependent high-energy (blue) shift in the PL spectrum of Si NCs with amide and alkoxy functionalization relative to alkyl. Time-resolved photoluminescence and transient absorption spectroscopies reveal no change in the excited-state dynamics between Si NCs functionalized with alkyl, amide, or alkoxide ligands, showing for the first time that saturated ligands - not only surface-derived charge-transfer states or hybridization between NC and low-lying ligand orbitals - are responsible for tuning the Si NC optical properties. To explain these PL shifts we propose that the atom bound to the Si NC surface strongly interacts with the Si NC electronic wave function and modulates the Si NC quantum confinement. Furthermore, these results reveal a potentially broadly applicable correlation between the optoelectronic properties of Si NCs and related quantum-confined structures based on the interaction between NC surfaces and the ligand binding group.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Surface plasmons induce topological transition in graphene/α-MoO3 heterostructures

Abstract Polaritons in hyperbolic van der Waals materials—where principal axes have permittivities of opposite signs—are light-matter modes with unique properties and promising applications. Isofrequency contours of hyperbolic polaritons may undergo topological transitions from open hyperbolas to closed ellipse-like curves, prompting an abrupt change in physical properties. Electronically-tunable topological transitions are especially desirable for future integrated technologies but have yet to be demonstrated. In this work, we present a doping-induced topological transition effected by plasmon-phonon hybridization in graphene/α-MoO 3 heterostructures. Scanning near-field optical microscopy was used to image hybrid polaritons in graphene/α-MoO 3 . We demonstrate the topological transition and characterize hybrid modes, which can be tuned from surface waves to bulk waveguide modes, traversing an exceptional point arising from the anisotropic plasmon-phonon coupling. Graphene/α-MoO 3 heterostructures offer the possibility to explore dynamical topological transitions and directional coupling that could inspire new nanophotonic and quantum devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Probing the Effects of the First Atomic Layer on the Dynamic Behavior of Sub-2 nm MgO/Al 2 O 3 Memristors

As electronic devices continue to scale down from the current sub-5 nm range, atomic-scale control of defects becomes increasingly crucial to suppressing their impact on the physical properties of the devices. Memristors present an excellent example as a nonlinear and dynamic device with high speed and endurance required for electronic applications ranging from neuromorphic computing to nonvolatile memories. Herein we investigate the impact of atomic defects in sub-2 nm thick MgO/Al 2 O 3 atomic layer stack (ALS) memristors that use an M1 (switching layer)/M2 (oxygen vacancy reservoir layer) bilayer structure grown using in vacuo atomic layer deposition (iALD). Intriguingly, we revealed a direct correlation of the atomic defects in the M2 layer with the memristor dynamic behavior using a combined analysis of in situ scanning tunneling spectroscopy (iSTS) on the M2 layer and ex situ characterization on the memristors. Specifically, incomplete coverage of the 1st ALD atomic layer of M2 on the electrode yields defects at the M2/electrode interface. Despite the monotonic increase of ALD coverage, by almost three-fold from ~30% to >90%, at completion of the M2 layer of ~ 0.7 nm in thickness, the impact of the defects on the M2/electrode interface has been found detrimental to both memristor switching speed and endurance. Guided by atomistic simulation, we addressed the issue of interface defects via tuning of the Al surface hydroxylation to increase the first atomic layer ALD coverage to ~75%, leading to improved memristor switching speed and endurance by several orders of magnitude. In conclusion, these findings shed light on the correlation between the atomic defects and the dynamic behavior of sub-2 nm memristors and the importance of minimizing the atomic defects in memristors for future electronic applications.

Atomic Layer Deposition↗
DOE OSTI2024

Accelerated Steam Methane Reforming by Dynamically Applied Charges

Catalyst design has traditionally focused on tuning active site properties to optimally bind reaction intermediates and balance the kinetic requirements of multiple competing chemical processes, as necessitated by the Sabatier principle. It has recently been proposed that for reactions following certain potential energy landscapes, the activity limit imposed by the Sabatier principle may be overcome by using programmed oscillations of surface electron density at the timescales of surface reactions (i.e., “catalytic resonance”). Here, we use a combination of density functional theory (DFT) simulations and transient kinetic models (TKMs) to simulate the kinetics of steam methane reforming (SMR) on Ru(211) surfaces under statically and dynamically applied charges. DFT-calculated binding energies of SMR intermediates and transition states exhibit strong sensitivity to positively applied charges and follow unique scaling relationships that deviate from linear periodic trends across transition metals. Our simulations demonstrate that applying a small positive charge to Ru dramatically enhances the steady-state turnover frequency (TOF) of SMR by up to 5 orders of magnitude above the TOF observed over neutral Ru. Thus, statically charging Ru catalysts may be an effective strategy to lower the temperature requirements for SMR. Dynamic square-wave oscillations in charge resulted in SMR catalytic resonance with an onset frequency f ∼ 106 Hz and the corresponding average TOFs exceeding the statically charged Ru surface by an additional 15%. Here, based on sensitivity analyses performed for the two end points of oscillation, we propose that dynamic TOF improvement beyond the Sabatier maximum can be expected when the system oscillates between two kinetic regimes that are uniquely controlled by distinct elementary steps.

Catalysts↗
DOE OSTI2020

Nonlinear dynamics and dissipation of a curvilinear vortex driven by a strong time-dependent Meissner current

Here, we report numerical simulations of large-amplitude oscillations of a trapped vortex line under a strong ac magnetic field $\textit{H(t) = H}$ sin$\textit{ωt}$ parallel to the surface. The power dissipated by an oscillating vortex segment driven by the surface ac Meissner currents was calculated by taking into account the nonlinear vortex line tension, vortex mass, and a nonlinear Larkin-Ovchinnikov (LO) viscous drag coefficient $\textit{η(v)}$. We show that the LO decrease of $\textit{η(v)}$ with the vortex velocity $\textit{v}$ can radically change the field dependence of the surface resistance R i ( H ) caused by trapped vortices. At low frequencies, $R_i(H)$ exhibits a conventional increase with $\textit{H}$, but as $\textit{ω}$ increases, the surface resistance becomes a nonmonotonic function of $\textit{H}$ which decreases with $\textit{H}$ at higher fields. The effects of frequency, pin spacing, and the mean-free path $l_i$ on the field dependence of $R_i(H)$ were calculated. It is shown that, as the surface gets dirtier and $l_i$ decreases, the anomalous drop of $R_i(H)$ with $\textit{H}$ shifts to lower fields which can be much smaller than the lower critical magnetic field. Our numerical simulations also show that the LO decrease of $\textit{η(v)}$ with $\textit{v}$ can cause a vortex bending instability at high field amplitudes and frequencies, giving rise to the formation of dynamic kinks along the vortex. Measurements of $R_i(H)$ caused by sparse vortices trapped perpendicular to the surface can offer opportunities to investigate an extreme nonlinear dynamics of vortices driven by strong current densities up to the depairing limit at low temperatures. The behavior of $R_i(H)$, which can be tuned by varying the rf frequency or concentration of nonmagnetic impurities, is not masked by strong heating effects characteristic of dc or pulse transport measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Disentangling High Harmonic Generation from Surface and Bulk States of a Topological Insulator

The discovery of topological phases has introduced a new dimension to materials science. Three-dimensional (3D) topological insulators (TIs) are a remarkable class of matter that is insulating in the bulk while hosting conductive topological surface states (TSSs) with unique charge and spin properties. High-order harmonic generation (HHG) has emerged as a powerful tool to probe condensed matter systems by providing insights into their electronic structure and dynamic behavior. Here, we investigate HHG in the prototype 3D-TI Bi$_2$Se$_3$. We demonstrate that the contributions of bulk and surface states to the harmonic emission can be controlled by tuning the thickness of thin film samples. An ultrathin (6 nm) film substantially enhances HHG from the surface states, while the bulk states dominate HHG in a thicker (50 nm) film. By applying a quasi-static terahertz perturbing field, we disentangle the bulk and surface responses and reveal the significant impact of the surface states' shift vector and Berry curvature on HHG. Our study provides effective methods for isolating the optical responses of TSSs from those of the bulk, which opens the door to resolving an ongoing debate regarding whether it is possible to reliably extract topological signatures in HHG.

Atomic Physics (physics.atom-ph)↗
DOE OSTI2023

Carbon-Assisted, Continuous Syngas Production in a Chemical Looping Scheme

In the current energy and environment scenario, it is imperative to develop energy efficient routes for chemical manufacturing that also pave the way for mitigation of greenhouse gas emissions. This work presents an efficient pathway for continuous syngas production via a chemical looping conversion of the two most potent greenhouse gases—CH 4 , and CO 2 . The well-known dry-reforming process of converting CH 4 , and CO 2 to syngas is energy-intensive and suffers from catalyst deactivation. The chemical looping approach, on the other hand, provides avenues for mitigating catalyst deactivation and enabling improved energy efficiency. The key to such process enhancements lies in the intricate structure–function relationships of the catalyst and its correlation to the process variables. We present the reduction and oxidation characteristics of 5 wt.% Ni/Ce 1-x Zr x O 2 -based catalysts (x = 0, 0.4, and 0.625). We demonstrate low temperature CH4 activation over Ni-promoted samples as opposed to pure Ce 1-x Zr x O 2 . Moreover, our results depict an optimum regeneration of these catalysts when oxidized by CO 2 , and H 2 O, which allows for chemical looping operation of steam reforming of methane as well. Process variables were tuned to optimize the CH 4 conversion (over 80%), and H 2 /CO ratio at 650 °C. The critical surface reactions—carbon accumulation and gasification, and thermocatalytic CO 2 splitting were investigated to elucidate the dynamic nature of the catalyst surface. In conclusion, the impact of this work lies in showcasing the opportunities to design chemical looping reactors for energy efficient syngas production from waste greenhouse gases.

25 ENERGY STORAGE↗
DOE OSTI2024

Nano-Plasticity of an Electrified Ionic Liquid/Electrode Interface: Uncovering Hard–Soft Structuring via Controlled Metal Fill Factor

Here, ionic liquids (ILs) nanostructuring at electrified interfaces is of both fundamental and practical interest as these materials are increasingly gaining prominence in energy storage and conversion processes. However, much remains unresolved about IL potential-controlled (re)organization under highly polarized interfaces, mostly due to the difficulty of selectively probing both the distal and proximal surface layers of adsorbed ions. In this work, the structural dynamics of the innermost layer (<10 nm from the surface) were independently interrogated from that of the ionic layers in the sub-surface region (>100 nm from the surface), using an infrared (IR) spectroscopy approach. By tuning the metal fill factor of gold films deposited on conductive metal oxide-modified IR internal reflection elements, the charge-driven (re)structuring of the inner and distal layers of 1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate is unveiled. Within a relatively wide potential region (~±1 V) bounding the potential of zero charges, the ionic liquid is shown to undergo a reversible (i.e., soft) reorganization whereby the innermost layer of anions (cations) is exchanged by a layer of cations (anions). Kinetically unhindered changes in the number density of constituent cations and anions largely follow electrostatic expectations in the subsurface region, whereas the innermost layer exhibits a pronounced hysteresis and very slow relaxation. Under larger negative potential bias, IL restructuring is characterized by a highly irreversible (i.e., hard) and intense interfacial densification of the BMPy + cations, consistent with the formation of nanoscale segregated liquids. The outcomes of this work reveal a plastic IL nanostructuring under a strong electric field.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Impacts of A‐Site Composition on the Cation Dissolution‐Mediated Surface Restructuring of Layered Nickelate Oxide Electrocatalysts During Alkaline Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is a key anodic counter‐reaction for electrochemical production of fuels and chemicals. It is hindered by sluggish four‐electron transfer kinetics requiring highly oxidative operating potentials to achieve commercially relevant rates. NiFeO x H y electrocatalysts are among the most promising for OER in alkaline electrolytes. The Ni(OH) 2 /NiOOH redox couple has been reported as the active phase in Ni‐based electrocatalysts; however, its activity is often hindered by deactivation arising from the formation of OER‐inactive insulating species. Limited strategies exist for mitigating this deactivation. This study aims to address this by interrogating the evolution of OER active sites as a function of precatalyst composition and structural properties using a series of layered, crystalline Ni‐based Ruddlesden–Popper (RP) oxides (A 2 NiO 4+δ ). In situ evolution of the active NiO x H y surface is probed through Ni‐site OER turnover frequency analysis, and electrochemical impedance spectroscopy coupled with scanning transmission electron microscopy. We show that the stability of layered nickelate oxide electrocatalysts is governed by the dynamic competition between cation dissolution and Ni‐site reversibility, which can be tuned through the A‐site composition of RP oxides. These findings yield insights toward engineering OER oxide precatalysts that optimize the stability of in situ‐generated OER active phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Degenerate parametric down-conversion facilitated by exciton-plasmon polariton states in a nonlinear plasmonic cavity

Abstract We study the effect of degenerate parametric down-conversion (DPDC) in an ensemble of two-level quantum emitters (QEs) coupled via near-field interactions to a single surface plasmon (SP) mode of a nonlinear plasmonic cavity. For this purpose, we develop a quantum driven-dissipative model capturing non-equilibrium dynamics of the system in which incoherently pumped QEs have transition frequency tuned near the second-harmonic response of the SPs. Considering the strong coupling regime, i.e. the SP-QE interaction rate exceeds system dissipation rates, we find a critical SP-QE coupling attributed to the phase transition between normal and lasing steady states. Examining fluctuations above the system’s steady states, we predict new elementary excitations, namely, the exciton-plasmon polaritons formed by the two-SP quanta and single-exciton states of QEs. The contribution of two-SP quanta results in the linear scaling of the SP-QE interaction rate with the number of QEs,  o , as opposed to the  o -scaling known for the Dicke and Tavis–Cummings models. We further examine how SP-QE interaction scaling affects the polariton dispersions and power spectra in the vicinity of the critical coupling. For this purpose, we compare the calculation results assuming a finite ensemble of QEs and the model thermodynamic limit. The calculated power spectra predict an interplay of coherent photon emission by QEs near the second-harmonic frequency and correlated photon-pair emission at the fundamental frequency by the SPs (i.e. the photonic DPDC effect).

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

De Novo Design of Self-Assembling Helical Protein Filaments

We describe a general computational approach to designing self-assembling helical filaments from monomeric proteins and use this approach to design proteins that assemble into micrometer-scale filaments with a wide range of geometries in vivo and in vitro. Cryo–electron microscopy structures of six designs are close to the computational design models. The filament building blocks are idealized repeat proteins, and thus the diameter of the filaments can be systematically tuned by varying the number of repeat units. The assembly and disassembly of the filaments can be controlled by engineered anchor and capping units built from monomers lacking one of the interaction surfaces. The ability to generate dynamic, highly ordered structures that span micrometers from protein monomers opens up possibilities for the fabrication of new multiscale metamaterials.

Shen, Hao↗
DOE OSTI2025

Enhancing Thermal Transport in Polymeric Composites Via Engineered Noncovalent Filler–Polymer Interactions

Understanding thermal transport mechanisms in polymeric composites allows us to expand the boundaries of thermal conductivity in them, either increasing it for more efficient heat dissipation or decreasing it for better thermal insulation. But, these mechanisms are not fully understood. Systematic experimental investigations remain limited. Practical strategies to tune the interfacial thermal resistance (ITR) between fillers and polymers and the thermal conductivity of composites remain elusive. Here, we studied the thermal transport in representative polymer composites, using polyethylene (PE) or polyaniline (PANI) as matrices and graphite as fillers. PANI, with aromatic rings in its backbone, interacts with graphite through strong noncovalent π–π stacking interactions, whereas PE lacks such interactions. We can then quantify how π–π stacking interactions between graphite and polymers enhance thermal transport in composites. PE/graphite and PANI/graphite composites with the same 1.5% filler volume fractions show a ∼22.82% and ∼34.85% enhancement in thermal conductivity compared to pure polymers, respectively. Calculated ITRs in PE/graphite and PANI/graphite are ~6 x 10 -8 m 2 KW -1 and ~1 x 10 -8 m 2 KW -1 , respectively, highlighting how π–π stacking interactions reduce ITR. Molecular dynamics (MD) simulations suggest that π–π stacking interactions between PANI chains and graphite surfaces enhance alignment of PANI's aromatic rings with graphite surfaces. This allows more carbon atoms from PANI chains to interact with graphite surfaces at a shorter distance compared to PE chains. Finally, our work indicates that tuning the π–π stacking interactions between polymers and fillers is an effective approach to reduce the ITR and enhance the thermal conductivity of composites.

atoms↗