Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamics reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Dynamic Control of Photocatalytic Proton Reduction through the Mechanical Actuation of a Hydrogel Host Matrix

This paper describes a photocatalytic hydrogen evolution system that is dynamically and reversibly responsive to the pH of the surrounding solution through actuation of a micro-hydrogel (microgel) matrix that hosts the photocatalysts (CdSe/CdS nanorods). Here, the reversible actuation occurs within 0.7 s (swelling) and 1.7 s (contraction). A ΔpH of 0.01 relative to the pK a of the tertiary amine on the microgel polymer (7.27) results in a reversible change in the average diameter of the microgel hosts by a factor of 2.5 and a change in the photocatalytic turnover frequency (TOF) by a factor of five. Kinetic isotope effect and photoluminescence quenching experiments reveal that the scavenging of the photoexcited hole by sulfite ions is the rate-limiting step and leads to the observed response of the TOF to pH through actuation of the microgel. Molecular dynamics simulations quantify a greater local concentration of sulfite hole scavengers for pH < pK a .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Brick Schema Standardized Plug Load Control Strategies for Load Reduction: Preprint

Plug loads comprise a significant percentage of commercial building energy consumption. Applying intelligent controls to turn off plug loads when unused can provide dynamic load reduction and flexibility, which are key traits of grid-interactive efficient buildings. This capability is important for equitable decarbonization as it can enable disadvantaged communities to electrify buildings without costly upgrades to electrical infrastructure. In this work, we present the effectiveness of various control strategies along with the operational lessons that informed their design. During a three-year period, we operated over 600 smart outlets in 12 university office buildings. The attached plug loads consisted primarily of printers, TVs, water dispensers, and copiers. After recording baseline power measurements for one year, we designed plug load control (PLC) strategies for each plug load type, use, and for different risk tolerance levels because PLC can potentially be disruptive to daily work. We used the Brick Schema to facilitate the management of plug load locations and other metadata. For advanced controls, we integrated the smart plugs with heating, ventilation, and air conditioning (HVAC) systems through the campus building automation system. We found static schedules to be the least disruptive and most predictable for occupants, resulting in 38% and 66% energy savings in two studies. For printers, print server-triggered PLC produced 86% savings, the highest of all strategies with minimal occupant impact. Scheduling of water dispensers and digital signage TVs produced 49% and 70% savings respectively with opportunities to improve performance with the use of HVAC occupancy data.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗
DOE OSTI2023

Multigrid Reduction in Time for Chaotic Dynamical Systems

As CPU clock speeds have stagnated and high performance computers continue to have ever higher core counts, increased parallelism is needed to take advantage of these new architectures. Traditional serial time-marching schemes can be a significant bottleneck, as many types of simulations require large numbers of time-steps which must be computed sequentially. Parallel-in-time schemes, such as the Multigrid Reduction in Time (MGRIT) method, remedy this by parallelizing across time-steps and have shown promising results for parabolic problems. However, chaotic problems have proved more difficult, since chaotic initial value problems (IVPs) are inherently ill-conditioned. MGRIT relies on a hierarchy of successively coarser time-grids to iteratively correct the solution on the finest time-grid, but due to the nature of chaotic systems, small inaccuracies on the coarser levels can be greatly magnified and lead to poor coarse-grid corrections. Here we introduce a modified MGRIT algorithm based on an existing quadratically converging nonlinear extension to the multigrid Full Approximation Scheme (FAS), as well as a novel time-coarsening scheme. Together, these approaches better capture long-term chaotic behavior on coarse-grids and greatly improve convergence of MGRIT for chaotic IVPs. Further, we introduce a novel low-memory variant of the algorithm for solving chaotic PDEs with MGRIT which not only solves the IVP, but also provides estimates for the unstable Lyapunov vectors of the system. Finally, we provide supporting numerical results for the Lorenz system and demonstrate parallel speedup for the chaotic Kuramoto–Sivashinsky PDE over a significantly longer time-domain than in previous works.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Simulated Hydrological Dynamics and Coupled Iron Redox Cycling Impact Methane Production in an Arctic Soil

The fate of organic carbon (C) in permafrost soils is important to the climate system due to the large global stocks of permafrost C. Thawing permafrost can be subject to dynamic hydrology, making redox processes an important factor controlling soil organic matter (SOM) decomposition rates and greenhouse gas production. In iron (Fe)-rich permafrost soils, Fe(III) can serve as a terminal electron acceptor, promoting anaerobic respiration of SOM and increasing pH. Current large-scale models of Arctic C cycling do not include Fe cycling or pH interactions. Here, a geochemical reaction model was developed by coupling Fe redox reactions and C cycling to simulate SOM decomposition, Fe(III) reduction, pH dynamics, and greenhouse gas production in permafrost soils subject to dynamic hydrology. In this study we parameterized the model using measured CO 2 and CH 4 fluxes as well as changes in pH, Fe(II), and dissolved organic C concentrations from oxic and anoxic incubations of permafrost soils from polygonal permafrost sites in northern Alaska, United States. In simulations of repeated oxic-anoxic cycles, Fe(III) reduction during anoxic periods enhanced CO 2 production, while the net effect of Fe(III) reduction on cumulative CH 4 fluxes depended on substrate C availability. With lower substrate availability, Fe(III) reduction decreased total CH 4 production by further limiting available substrate. With higher substrate availability, Fe(III) reduction enhanced CH 4 production by increasing pH. Our results suggest that interactions among Fe-redox reactions, pH and methanogenesis are important factors in predicting CH 4 and CO 2 production as well as SOM decomposition rates in Fe-rich, frequently waterlogged Arctic soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Lift & Learn: Physics-informed machine learning for large-scale nonlinear dynamical systems

In this work, we present Lift & Learn, a physics-informed method for learning low-dimensional models for large-scale dynamical systems. The method exploits knowledge of a system’s governing equations to identify a coordinate transformation in which the system dynamics have quadratic structure. This transformation is called a lifting map because it often adds auxiliary variables to the system state. The lifting map is applied to data obtained by evaluating a model for the original nonlinear system. This lifted data is projected onto its leading principal components, and low-dimensional linear and quadratic matrix operators are fit to the lifted reduced data using a least-squares operator inference procedure. Analysis of our method shows that the Lift & Learn models are able to capture the system physics in the lifted coordinates at least as accurately as traditional intrusive model reduction approaches. This preservation of system physics makes the Lift & Learn models robust to changes in inputs. Numerical experiments on the FitzHugh–Nagumo neuron activation model and the compressible Euler equations demonstrate the generalizability of our model.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

A critical review of operational strategies for the management of harmful algal blooms (HABs) in inland reservoirs

Occurrences of freshwater harmful algal blooms (HABs) are increasing on a global scale, largely in part due to increased nutrient input and changing climate patterns. While reservoir management strategies that can influence phytoplankton are known, there is no published guideline or protocol for the management of harmful algal blooms. There is a need to establish what factors are the predominant drivers of blooms, and how common reservoir management strategies specifically influence each factor. The following literature review seeks to establish the benefits and drawbacks of operational management strategies that currently exist. The main focus is altering hydrodynamic conditions (hypolimnetic withdrawals, surface flushing, pulsed inflow, artificial mixing), in order to induce environmental changes within the reservoir itself. Since excess nutrients are one of the biggest contributors to worsening bloom conditions, internal nutrient dynamics and reduction are also discussed. Additionally, we review the predominant seasonal factors (stratification, light, temperature, and wind) that affect likelihood of bloom occurrence and duration. In conclusion, the ultimate objective of this review is to increase understanding of the relationships between HAB drivers and reservoir operations in order to inform the development of data, modeling, and management strategies for the prevention and mitigation of blooms.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Bayesian reduced-order deep learning surrogate model for dynamic systems described by partial differential equations

We propose a reduced-order deep-learning surrogate model for dynamic systems described by time-dependent partial differential equations. This method employs space–time Karhunen–Loève expansions (KLEs) of the state variables and space-dependent KLEs of space-varying parameters to identify the reduced (latent) dimensions. Subsequently, a deep neural network (DNN) is used to map the parameter latent space to the state variable latent space. An approximate Bayesian method is developed for uncertainty quantification (UQ) in the proposed KL-DNN surrogate model. The KL-DNN method is tested for the linear advection–diffusion and nonlinear diffusion equations, and the Bayesian approach for UQ is compared with the deep ensembling (DE) approach, commonly used for quantifying uncertainty in DNN models. It was found that the approximate Bayesian method provides a more informative distribution of the PDE solutions in terms of the coverage of the reference PDE solutions (the percentage of nodes where the reference solution is within the confidence interval predicted by the UQ methods) and log predictive probability. The DE method is found to underestimate uncertainty and introduce bias. For the nonlinear diffusion equation, we compare the KL-DNN method with the Fourier Neural Operator (FNO) method and find that KL-DNN is 10% more accurate and needs less training time than the FNO method.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Material Changes in Electrocatalysis: An In Situ/Operando Focus on the Dynamics of Cobalt‐Based Oxygen Reduction and Evolution Catalysts

Abstract The shift towards cheaper, non‐platinum group metal electrocatalyst materials for clean energy technologies is coupled with challenges in maintaining long‐term performance. For practical purposes, electrocatalytic stability typically focuses on catalyst electrochemical performance over time. However, a deeper understanding of catalyst material property changes during operation is needed to enable material‐specific design strategies for long‐term stabilization. In the last several decades, improvements in material characterization techniques have made it possible to probe the composition, structure, and degradation products of catalysts in situ/operando. Herein we review the current understanding of in situ/operando material stability of Co‐based electrocatalysts for the oxygen evolution (OER) and reduction reactions (ORR) in acidic and alkaline environments. We focus on in situ/operando materials characterization of three categories of Co‐based OER/ORR catalysts: oxides and (oxy)hydroxides, mixed‐metal catalysts, and non‐oxide materials. This review aims to compile and compare the results from multiple studies and techniques to provide insight into the role that the starting material, pH, and applied potential have on the active surface and stability of Co‐based materials. We conclude by highlighting directions that have been underexplored with opportunities for continued research including improving in situ/operando characterization, methods to probe long‐term material changes, and the development of operando studies on full‐scale devices. Using Co‐based materials as a case study, this review shows the vital role that in situ/operando characterization must play in the future of improving electrocatalyst stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Multi-objective sizing and dispatch for building thermal and battery storage towards economic and environmental synergy

The role of building thermal and battery storage is pivotal in advancing smart cities and achieving sustainability goals through effective energy management. Despite their significance, there are several limitations in the sizing approach and value stream analysis with various objectives for their widespread adoption in buildings. This work proposes a flexible and scalable multi-objective optimization framework for optimal sizing and dispatch of building thermal and battery storage, addressing conflicting objectives simultaneously using mixed-integer linear programming. The weighted-sum method is adapted, combining multiple objectives into a single function. The two-stage procedure iterates over different weights, generating optimal solutions and forming the Pareto front. Case studies are performed to assess the energy, economic, and environmental benefits of building energy storage systems for a large office building in three climate locations. The results demonstrate that the proposed framework efficiently determines optimal sizing and dispatch strategies, addressing the balance between economic viability and emission reduction. The dynamic relationship between time-of-use energy charges and emission factors leads to significantly different strategies based on whether economic or environmental concerns are prioritized. This research enhances our understanding of the benefits of TES and BES systems in buildings, providing valuable guidance to stakeholders.

25 ENERGY STORAGE↗
DOE OSTI2025

Carboxylic acid induced restructuring of the Fe 3 O 4 (001) surface

The redox properties of Fe 3 O 4 surfaces are central to many catalytic processes and enable dynamic, reduction-induced morphological restructuring during reactions. Here, we investigate the structural changes of the Fe 3 O 4 (001) surface during the decomposition of formic and acetic acids using scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations. Both acids readily deprotonate, forming ordered carboxylate overlayers on the surface. Product formation pathways involve the removal of lattice oxygen, resulting in extensive surface restructuring. For formic acid, only a modest level of surface oxygen removal (∼3%) is observed, resulting in elongated pits along the octahedral Fe rows and exhibiting an aspect ratio of ∼3. In contrast, acetic acid induces more extensive reduction, with the removal of ∼20% of surface oxygen, yielding significantly larger pits while maintaining a similar aspect ratio. Repeated exposure to acetic acid further enlarges the pits, indicating preferential etching at step edges. DFT calculations reveal a mechanistic sequence in which lattice oxygen removal destabilizes adjacent Fe atoms, promoting their migration into the bulk and subsequent pit propagation and step edge formation. Together, these findings provide atomistic insights into the coupling between carboxylic acid conversion and oxide surface restructuring, underscoring the strong interplay between redox chemistry and morphological changes on catalytically active Fe 3 O 4 surfaces.

Ortiz-Garcia, José J. [Pacific Northwest National ↗
DOE OSTI2025

Predicting nonequilibrium Green’s function dynamics and photoemission spectra via nonlinear integral operator learning

Understanding the dynamics of nonequilibrium quantum many-body systems is an important research topic in a wide range of fields across condensed matter physics, quantum optics, and high-energy physics. However, numerical studies of large-scale nonequilibrium phenomena in realistic materials face serious challenges due to intrinsic high-dimensionality of quantum many-body problems and the absence of time-invariance. The nonequilibrium properties of many-body systems can be described by the dynamics of the correlator, or the Green's function of the system, whose time evolution is given by a high-dimensional system of integro-differential equations, known as the Kadanoff–Baym equations (KBEs). The time-convolution term in KBEs, which needs to be recalculated at each time step, makes it difficult to perform long-time numerical simulation. In this paper, we develop an operator-learning framework based on recurrent neural networks (RNNs) to address this challenge. We utilize RNNs to learn the nonlinear mapping between Green's functions and convolution integrals in KBEs. By using the learned operators as a surrogate model in the KBE solver, we obtain a general machine-learning scheme for predicting the dynamics of nonequilibrium Green's functions. Besides significant savings per each time step, the new methodology reduces the temporal computational complexity from $O(N_t^3)$ to $O(N_t)$ where N t is the number of steps taken in a simulation, thereby making it possible to study large many-body problems which are currently infeasible with conventional KBE solvers. Through various numerical examples, we demonstrate the effectiveness of the operator-learning based approach in providing accurate predictions of physical observables such as the reduced density matrix and time-resolved photoemission spectra. Moreover, our framework exhibits clear numerical convergence and can be easily parallelized, thereby facilitating many possible further developments and applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Toward a classification of PT-symmetric quantum systems: From dissipative dynamics to topology and wormholes

Studies of many-body non-Hermitian parity-time (PT)-symmetric quantum systems are attracting a lot of interest due to their relevance in research areas ranging from quantum optics and continuously monitored dynamics to Euclidean wormholes in quantum gravity and dissipative quantum chaos. While a symmetry classification of non-Hermitian systems leads to 38 universality classes, we show that, under certain conditions, PT-symmetric systems are grouped into 24 universality classes. We identify 14 of them in a coupled two-site Sachdev-Ye-Kitaev (SYK) model and confirm the classification by spectral analysis using exact diagonalization techniques. Intriguingly, in 4 of these 14 universality classes, AIII ν , BDI ν † , BDI + + ν , and CI − − ν , we identify a basis in which the SYK Hamiltonian has a block structure in which some blocks are rectangular, with ν ∈ N the difference between the number of rows and columns. We show analytically that this feature leads to the existence of ν robust purely eigenvalues, whose level statistics follow the predictions of Hermitian random matrix theory for classes A, AI, BDI, and CI, respectively. We have recently found that this ν is a topological invariant, so these classes are topological. By contrast, nontopological real eigenvalues display a crossover between Hermitian and non-Hermitian level statistics. Similarly to the case of Lindbladian dynamics, the reduction of universality classes leads to unexpected results, such as the absence of Kramers degeneracy in a given sector of the theory. Another novel feature of the classification scheme is that different sectors of the PT-symmetric Hamiltonian may have different symmetries. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2025

Coherent diffraction imaging in the undergraduate laboratory

We present an undergraduate optics instructional laboratory designed to teach skills relevant to a broad range of modern scientific and technical careers. In this laboratory project, students image a custom aperture using coherent diffraction imaging, while learning principles and skills related to digital image processing and computational imaging, including multidimensional Fourier analysis, iterative phase retrieval, noise reduction, finite dynamic range, and sampling considerations. After briefly reviewing these imaging principles, we describe the required experimental materials and setup for this project. Our experimental apparatus is both inexpensive and portable, and a software application we developed for interactive data analysis is freely available.

Porter, J. Nicholas↗
DOE OSTI2021

No ordinary proteins: Adsorption and molecular orientation of monoclonal antibodies

The interaction of monoclonal antibodies (mAbs) with air/water interfaces plays a crucial role in their overall stability in solution. We aim to understand this behavior using pendant bubble measurements to track the dynamic tension reduction and x-ray reflectivity to obtain the electron density profiles (EDPs) at the surface. Native immunoglobulin G mAb is a rigid molecule with a flat, “Y” shape, and simulated EDPs are obtained by rotating a homology construct at the surface. Comparing simulations with experimental EDPs, we obtain surface orientation probability maps showing mAbs transition from flat-on Y-shape configurations to side-on or end-on configurations with increasing concentration. The modeling also shows the presence of β sheets at the surface. Overall, the experiments and the homology modeling elucidate the orientational phase space during different stages of adsorption of mAbs at the air/water interface. These finding will help define new strategies for the manufacture and storage of antibody-based therapeutics.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Liquid Core Detection and Strand Condition Monitoring in a Continuous Caster Using Optical Fiber

Real-time monitoring of the liquid core position during the continuous casting of steel has been demonstrated using low-cost distributed optical-fiber-based strain sensors. These sensors were installed on the containment roll support structures in the segments of a production continuous caster to detect the position of the solid–liquid interface and monitor the strand condition during the continuous casting. Distributed Fiber Bragg Grating sensors (FBGs) were used in this work to monitor strain at six roll positions in the caster. The sensor performance was first validated by comparing optical strain measurements with conventional strain gauge measurements in the lab. Next, optical strain measurements were performed on an isolated caster segment in a segment maintenance facility using hydraulic jacks to simulate the presence of a liquid core under the roll. Finally, the sensors were evaluated during caster operation. The sensors successfully detected the load increase associated with the presence of a liquid core under each instrumented roll location. Incidents of bulging and roll eccentricity were also detected using frequency analysis of the optical strain signal. The liquid core position measurements were compared using predictions from computer models (digital twins) in use at the production site. The measurements were in good agreement with the model predictions, with a few exceptions. Under certain transient caster operating conditions, such as spraying practice changes and SEN exchanges, the model predictions deviated slightly from the liquid core position determined from strain measurements.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Long-term carbon emission reduction potential of building retrofits with dynamically changing electricity emission factors

Buildings account for approximately 36% of the United States' total carbon emissions and building retrofits have great potential to reduce carbon emissions. Current research adopts a constant electricity emission factor although it changes over time due to the increase of renewable energy generation. Here, to accurately predict emission reduction potential of building retrofits, this study develops a novel method by using dynamically changing electricity emission factors. Using medium office buildings as an example, we predicted emission reduction of eight building retrofit measures from 2020 to 2050 in five locations in the U.S. with distinct climates and renewable adoption rates. To evaluate emission reduction potential sensitivity to the compositions of electricity generation, five scenarios for renewable energy adoptions are investigated. The results reveal several new phenomena on emission reduction potential of building retrofits for medium offices in the U.S.: (1) it decreases from 2026 to 2050; (2) it has the same trend with coal usage; and (3) it reaches the maximum under the high renewable cost scenario. Based on the results, it is recommended that building retrofits should focus on 1) improving lighting and equipment efficiency; 2) locations with higher coal usage rate, and 3) buildings under the high renewable cost scenario. The new method can also be used for predicting emission reduction potential of the building sector in the U.S. by applying to other building types and regions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Modulating Cu electrode microenvironments with MOF coatings: insights from molecular dynamics and electrochemical experiments of CO reduction

Metal-organic frameworks (MOFs) present a compelling strategy for tuning electrochemical interfaces by reshaping interfacial solvent structure. In this study, we examine how MOF coatings influence the microenvironment at copper electrodes during the CO electroreduction reaction (CORR) using a combined approach of molecular dynamics (MD) simulations and electrochemical experiments. Two MOFs, NU-901 and ZIF-8, are selected to explore the impact of pore size and channel hydrophobicity on electrochemical activity and interfacial concentration in acetonitrile (ACN) and dimethyl sulfoxide (DMSO) electrolytes. Electrochemical measurements reveal that MOF@Cu electrodes exhibit lower Faradaic efficiencies for CO hydrogenation products (ethylene and methane) compared to bare copper but have dramatic impacts on the interfacial microenvironment. NU-901, with its larger pores and strong interactions with DMSO, traps DMSO molecules and enhances CO coordination in DMSO but suppresses CORR selectivity in favor of the hydrogen evolution reaction (HER). ZIF-8, with smaller pores and hydrophobic channels, limits the interfacial water concentration, and, in ACN, promotes CO coordination. The simulations provide insights into how MOFs can act as physical modulators of reactant delivery and interfacial structure to control electrochemical microenvironments. This work highlights the value of molecular dynamics in uncovering how structural features of MOFs influence interfacial phenomena, even when catalytic performance is not directly improved.

Copper electrode microenvironments↗
DOE OSTI2021

A compute-bound formulation of Galerkin model reduction for linear time-invariant dynamical systems

This work aims to advance computational methods for projection-based reduced-order models (ROMs) of linear time-invariant (LTI) dynamical systems. For such systems, current practice relies on ROM formulations expressing the state as a rank-1 tensor (i.e., a vector), leading to computational kernels that are memory bandwidth bound and, therefore, ill-suited for scalable performance on modern architectures. This weakness can be particularly limiting when tackling many-query studies, where one needs to run a large number of simulations. This work introduces a reformulation, called rank-2 Galerkin, of the Galerkin ROM for LTI dynamical systems which converts the nature of the ROM problem from memory bandwidth to compute bound. We present the details of the formulation and its implementation, and demonstrate its utility through numerical experiments using, as a test case, the simulation of elastic seismic shear waves in an axisymmetric domain. We quantify and analyze performance and scaling results for varying numbers of threads and problem sizes. In conclusion, we present an end-to-end demonstration of using the rank-2 Galerkin ROM for a Monte Carlo sampling study. We show that the rank-2 Galerkin ROM is one order of magnitude more efficient than the rank-1 Galerkin ROM (the current practice) and about 970 times more efficient than the full-order model, while maintaining accuracy in both the mean and statistics of the field.

97 MATHEMATICS AND COMPUTING↗