Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrochemical CO2 reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Oxygen Generation from Carbon Dioxide for Advanced Life Support

The partial electrochemical reduction of CO2 using ceramic oxygen generators (COGs) is well known and has been studied. Conventional COGs use yttria-stabilized zirconia (YSZ) electrolytes and operate at temperatures greater than 700 C (1, 2). Operating at a lower temperature has the advantage of reducing the mass of the ancillary components such as insulation. Moreover, complete reduction of metabolically produced CO2 (into carbon and oxygen) has the potential of reducing oxygen storage weight if the oxygen can be recovered. Recently, the University of Florida developed ceramic oxygen generators employing a bilayer electrolyte of gadolinia-doped ceria and erbia-stabilized bismuth oxide (ESB) for NASA s future exploration of Mars (3). The results showed that oxygen could be reliably produced from CO2 at temperatures as low as 400 C. These results indicate that this technology could be adapted to CO2 removal from a spacesuit and other applications in which CO2 removal is an issue. This strategy for CO2 removal in advanced life support systems employs a catalytic layer combined with a COG so that the CO2 is reduced completely to solid carbon and oxygen. First, to reduce the COG operating temperature, a thin, bilayer electrolyte was employed. Second, to promote full CO2 reduction while avoiding the problem of carbon deposition on the COG cathode, a catalytic carbon deposition layer was designed and the cathode utilized materials shown to be coke resistant. Third, a composite anode was used consisting of bismuth ruthenate (BRO) and ESB that has been shown to have high performance (4). The inset of figure 1 shows the conceptual design of the tubular COG and the rest of the figure shows schematically the test apparatus. Figure 2 shows the microstructure of a COG tube prior to testing. During testing, current is applied across the cell and initially CuO is reduced to copper metal by electrochemical pumping. Then the oxygen source becomes the CO/CO2. This presentation details the results of testing the COG.

Bishop, s. R.↗
DOE OSTI2020

Mesoporous PdAg Nanospheres for Stable Electrochemical CO 2 Reduction to Formate

Palladium is a promising material for electrochemical CO 2 reduction to formate with high Faradaic efficiency near the equilibrium potential. It unfortunately suffers from problematic operation stability due to CO poisoning on surface. In this work, it is demonstrated that alloying is an effective strategy to alleviate this problem. Mesoporous PdAg nanospheres with uniform size and composition are prepared from the co-reduction of palladium and silver precursors in aqueous solution using dioctadecyldimethylammonium chloride as the structure-directing agent. The best candidate can initiate CO 2 reduction at zero overpotential and achieve high formate selectivity close to 100% and great stability even at <-0.2 V versus reversible hydrogen electrode. The high selectivity and stability are believed to result from the electronic coupling between Pd and Ag, which lowers the d-band center of Pd and thereby significantly enhances its CO tolerance, as evidenced by both electrochemical analysis and theoretical simulations.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Development of Electrolytic Oxygen Recovery System for Advanced Life Support

The oxygen (O2) recovery system for the International Space Station (ISS) can recover approximately 50 percent of O2 from metabolic carbon dioxide (CO2). Increasing the O2 recovery rate and closing the open loop for future long duration crewed missions in space beyond Low Earth Orbit (LEO) is essential. There are several developmental efforts underway to increase the recovery rate. However, most of these technologies result in a complex, heavy, and power consuming system. The desired exploration O2 recovery system would be reliable and efficient with maximum O2 recovery. Marshall Space Flight Center (MSFC) is currently investigating an electrolytic O2 recovery approach that will increase the O2 recovery to greater than 70 percent as well as lowering the complexity, mass, and power consumption than most other technologies currently under development. The electrolytic O2 recovery system consists of a Microfluidic Electrochemical Reactor (MFECR) that is based on the electrochemical reduction of CO2 to O2 and ethylene (C2H4) using water (H2O) as precursor and operates at standard condition with a theoretical recovery rate of 73 percent. In 2016, NASA’s Game Changing Development Program awarded the University of Texas Arlington (UTA) a grant to initiate the development of the MFECR. Since 2019, MSFC and UTA have been collaborating with the current goals of increasing the O2 recovery efficiency, advancing the technology readiness to a Technology Readiness Level (TRL) 4, and maturing the system to process CO2 of one crew-member. Based on the results from UTA’s initial efforts, the following were identified as key areas of improvement in order to maximize O2 recovery for the system: further development of the anode material and cathode catalyst, model-based cell design optimization, and the addition of a separation system and fuel cell. This paper will present the current developmental efforts of the electrolytic system including MFECR design and overall system enhancements as well as results from single cell stack testing.

Brittany R Brown↗
DOE OSTI2023

Fe-N 4 O-C Nanoplates Covalently Bonding on Graphene for Efficient CO 2 Electroreduction and Zn-CO 2 Batteries

Electrochemical carbon dioxide (CO 2 ) reduction into value-added products holds great promise in moving toward carbon neutrality but remains a grand challenge due to lack of efficient electrocatalysts. Herein, the nucleophilic substitution reaction is elaborately harnessed to synthesize carbon nanoplates with a Fe-N 4 O configuration anchored onto graphene substrate (Fe-N 4 O-C/Gr) through covalent linkages. Density functional theory calculations demonstrate the unique configuration of Fe-N 4 O with one oxygen (O) atom in the axial direction not only suppresses the competing hydrogen evolution reaction, but also facilitates the desorption of *CO intermediate compared with the commonly planar single-atomic Fe sites. The Fe-N 4 O-C/Gr shows excellent performance in the electroreduction of CO 2 into carbon monoxide (CO) with an impressive Faradaic efficiency of 98.3% at -0.7 V versus reversible hydrogen electrode (RHE) and a high turnover frequency of 3511 h -1 . Furthermore, as a cathode catalyst in an aqueous zinc (Zn)-CO 2 battery, the Fe-N 4 O-C/Gr achieves a high CO Faradaic efficiency (≈91%) at a discharge current density of 3 mA cm -2 and long-term stability over 74 h. Here this work opens up a new route to simultaneously modulate the geometric and electronic structure of single-atomic catalysts toward efficient CO 2 conversion.

25 ENERGY STORAGE↗
DOE OSTI2026

Site-Selective Doping and Oxidation State Control of Copper in Gold Nanorods

We report the synthesis of plasmonic gold–copper nanostructures with tunable copper spatial distribution and oxidation state. Au–Cu alloy shells were deposited in aqueous solution onto colloidal gold nanorods that functioned as seeds, and the resulting shell morphology was found to depend strongly on the nanorod aspect ratio. For relatively fat gold nanorods (16 x 31 nm), Au–Cu growth was preferentially localized near the rod midsections, forming belt-like structures, whereas for skinnier nanorods (9 x 32 nm), Au–Cu growth produced patchy surface coverage around the entire rod. The shell thickness was tuned from 1 to 4 nm; upon air exposure, thicker shells exhibited a higher Cu(I) fraction compared to the initial shell. Incorporation of the Au–Cu shell led to pronounced shifts in the plasmonic features of the gold nanorods. These tunable plasmonic Au–Cu nanorods provide a materials basis for Cu-based plasmonic materials in the context of electrochemical CO₂ reduction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Effect of Gold Catalyst Surface Morphology on Wetting Behavior and Electrochemical CO 2 Reduction Performance in a Large-Area Zero-Gap Gas Diffusion Electrolyzer

We report catalyst surface area and wetting behavior are key factors in determining the performance of gas diffusion electrode (GDE) electrolyzers for electrochemical CO 2 reduction. In this work, we report the integration of sub-1 μm thick nanoporous gold (npAu) catalyst coatings into a large-area (25 cm 2 ) zero-gap electrolyzer. The npAu coatings were prepared by magnetron sputtering (MS) of thin AgAu alloy films on the microporous carbon layer of a gas diffusion layer (GDL) followed by Ag leaching. Compared to MS Au films of the same thickness, npAu catalyst coatings enable higher Faradaic efficiencies and improved catalyst stability for CO 2 -to-CO reduction with Faradaic efficiencies of up to 88% at 100 mA/cm 2 . For a 800 nm npAu coating, the device level energy efficiency for CO 2 to CO conversion reaches 45% (52% for CO + H 2 ) at 100 mA/cm 2 with a single pass CO 2 conversion efficiency of ~12%. Contact angle measurements reveal that npAu coatings provide a more hydrophobic electrode interface compared to MS Au coatings, suggesting that the more hydrophobic interfacial environment of npAu coatings helps mitigating electrode flooding which is associated with performance deterioration over time.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

A Bifunctional Ionic Liquid for Capture and Electrochemical Conversion of CO 2 to CO over Silver

Electrochemical conversion of CO 2 requires selective catalysts and high solubility of CO 2 in the electrolyte to reduce the energy requirement and increase the current efficiency. In this study, the CO 2 reduction reaction (CO 2 RR) over Ag electrodes in acetonitrile-based electrolytes containing 0.1 M [EMIM][2-CNpyr] (1-ethyl-3-methylimidazolium 2-cyanopyrolide), a reactive ionic liquid (IL), is shown to selectively (>94%) convert CO 2 to CO with a stable current density (6 mA·cm –2 ) for at least 12 h. The linear sweep voltammetry experiments show the onset potential of CO 2 reduction in acetonitrile shifts positively by 240 mV when [EMIM][2-CNpyr] is added. This is attributed to the pre-activation of CO 2 through the carboxylate formation via the carbene intermediate of the [EMIM] + cation and the carbamate formation via binding to the nucleophilic [2-CNpyr] – anion. The analysis of the electrode–electrolyte interface by surface-enhanced Raman spectroscopy (SERS) confirms the catalytic role of the functionalized IL where the accumulation of the IL-CO 2 adduct between –1.7 and –2.3 V vs Ag/Ag + and the simultaneous CO formation are captured. Furthermore, this study reveals the electrode surface species and the role of the functionalized ions in lowering the energy requirement of CO 2 RR for the design of multifunctional electrolytes for the integrated capture and conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Scalable Gas Diffusion Electrode Fabrication for Electrochemical CO 2 Reduction Using Physical Vapor Deposition Methods

Electrochemical CO 2 reduction (ECR) promises the replacement of fossil fuels as the source of feedstock chemicals and seasonal storage of renewable energy. While much progress has been made in catalyst development and electrochemical reactor design, few studies have addressed the effect of catalyst integration on device performance. Using a microfluidic gas diffusion electrolyzer, we systematically studied the effect of thickness and the morphology of electron beam (EB) and magnetron-sputtered (MS) Cu catalyst coatings on ECR performance. We observed that EB-Cu outperforms MS-Cu in current density, selectivity, and energy efficiency, with 400 nm thick catalyst coatings performing the best. Additionally, the superior performance of EB-Cu catalysts is assigned to their faceted surface morphology and sharper Cu/gas diffusion layer interface, which increases their hydrophobicity. Tests in a large-scale zero-gap electrolyzer yielded similar product selectivity distributions with an ethylene Faradaic efficiency of 39% at 200 mA/cm 2 , demonstrating the scalability for industrial ECR applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Defective Sn-Zn perovskites through bio-directed routes for modulating CO 2 RR

Sn and Zn oxides can catalyze electrochemical CO 2 reduction reactions (CO 2 RR) to produce useful chemicals. Herein, we report on perovskite-type tin-zinc oxides (TZO) synthesized by a biomineralization approach under benign aqueous conditions. The resulting TZO catalysts are disordered and possess a high quantity of defects, which serve as highly reactive active sites in CO 2 RR. Selectively toward formate or CO is tunable toward the relative amounts of Sn and Zn and their associated O defects. In-situ X-ray absorption spectroscopy measurements reveal electronic and structural transformations consistent with oxygen vacancy formation at Sn-O-Zn bridges as a function of cathodic potential that strongly correlates to CO2RR selectivity. Further, Density functional theory (DFT) calculations demonstrate that introducing an oxygen vacancy in TZO influences drastically influences formate/CO selectivity, consistent with our in-situ XAS findings and catalytic performance. Overall, these findings demonstrate the potential of biomineralization to fabricate perovskite-type metal oxides for energy conversion reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Direct Air Capture-Compatible Azolate and Amino Acid Ionic Liquids for Electrochemical CO 2 Reduction to CO on a Silver Cathode

Direct air capture (DAC) compatible ionic liquids (ILs) are attractive for integrating CO 2 capture and conversion due to their high CO 2 solubility at low partial pressures, tunable chemisorption mechanisms, low volatility, and wide electrochemical windows. However, very few ILs have high CO 2 uptake at DAC conditions (420 ppm CO 2 ), and even fewer have been evaluated for chemical compatibility and mechanistic continuity for combined capture and electrochemical CO 2 reduction (eCO 2 RR). We demonstrate that two representative DAC-capable ILs, [P 4444 ][Val] (amino acid-based) and [P 66614 ][5-Me-Imd] (azolate-based), exhibit favorable electrochemical reduction behavior. CO and H 2 were the dominant gas-phase products by GC, while 1 H and 13 C NMR confirmed negligible liquid-phase HCOOH. Chronoamperometry at moderate applied potentials (−2.0 to −2.5 V vs Ag/AgCl) in a two-compartment H-cell with a Ag coated carbon paper as the working electrode yielded steady-state current densities of ∼10 mA cm −2 with CO FE of 96% for [P 4444 ][Val] and 95% for [P 66614 ][5-Me-Imd], highlighting the role of viscosity and chemically absorbed CO 2 -IL species to provide highly selective CO formation while suppressing H 2 evolution.

amino acid ionic liquid↗
DOE OSTI2021

Scalable fabrication of high activity nanoporous copper powders for electrochemical CO 2 reduction via ball milling and dealloying

Electrochemical CO 2 reduction (ECR) is a promising technology to close the anthropic CO 2 circle using renewable energy to achieve carbon neutrality. Future commercialization of ECR will require the development of new catalyst synthesis routes that will allow significant upscaling of catalyst production from current research-level milligram quantities to the kilogram scale and beyond while maintaining the activity and selectivity demonstrated at the research level. Here, we report on generating and testing submicron-sized nanoporous copper (npCu) particles by using a scalable approach consisting of ball milling brittle Cu-based intermetallics followed by dealloying to add nanoporosity for high surface area. The resulting npCu particles have been tested in an industry-relevant large area (25 cm 2 ) electrolyzer platform and showed Faraday efficiencies (FE) for ethylene up to 34 % at current densities of 75–100 mA/cm 2 while keeping FE for hydrogen less than 30 %. Our results demonstrate that a combination of ball milling and dealloying is a promising approach to generate large quantities of high activity and high surface area npCu particles for ECR at an industry-relevant scale.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Restructuring of Benzimidazole-Based Copper Complexes during Electrochemical CO 2 Reduction

Copper-based molecular catalysts have been widely used for the electrochemical reduction of carbon dioxide (ERCO 2 ). However, establishing a correlation between structure and catalytic performance has been challenging due to the dynamic nature of these materials under ERCO 2 working conditions. Here, we report on the restructuring of the copper complexes [Cu(bzimpy)Cl 2 ] and [Cu(pyrben) 2 (NO 3 )]NO 3 during ERCO 2 in an acidic medium, evidencing its effects on the observed activity, selectivity, and stability. In situ X-ray absorption spectroscopy (XAS) suggested that, at sufficiently negative potentials, the Cu 2+ centers of both complexes are reduced to undercoordinated Cu 0 species. Pb underpotential deposition of post-ERCO 2 samples indicated that such Cu 0 species also present a dominant contribution of the (100) domain, which is in line with the high Faradaic efficiency toward C 2 products (∼45%) shown by both complexes at −1.24 V vs RHE. By combining online electrochemical mass spectrometry, in situ XAS, electron paramagnetic resonance (EPR), and quantitative product analysis, we found that [Cu(bzimpy)Cl 2 ] exhibits a partially reversible restructuring, regenerating the main complex moiety, [Cu(bzimpy)] 2+ , and its geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Net-Zero Ethylene: On the Sustainability, Economics, and Scalability of Synthetic and Fossil Production Pathways

The ethylene industry has contributed over 260 million tons of CO 2 annually, warranting a more sustainable approach. The conversion of CO 2 and H 2 O into ethylene is an appealing technology capable of decoupling chemical production from fossil fuels. However, the large energy demand from this process can potentially lead to adverse environmental impacts. Here, in this article, we critically analyze the economic viability, environmental impact, and scalability of the conversion of CO 2 to ethylene via electrochemical reduction (CO 2 R) and compare this with those of CO 2 -neutral fossil routes utilizing carbon capture and direct air capture. Ethylene derived from CO 2 may be economically competitive under optimistic conditions; however, its large energy requirements pose environmental and scalability challenges. Meeting forecast 2050 ethylene demand using CO 2 R would require half of all electricity produced globally today, and, if powered by solar PV, may have greater CO 2 emissions than current petrochemical ethylene production, negating the purpose of this technology. Using Carbon Capture and Storage and Direct Air Capture to decarbonize petrochemical pathways would require roughly an order of magnitude less energy but would have disproportionate health and climate impacts. Lastly, the analysis highlights the importance of low-carbon energy sources to ensure sustainable CO 2 R ethylene production.

CO2R↗
DOE OSTI2026

CO (2) Electroreduction on Borated Copper Surfaces: Boron Active Sites, Not Copper

Boron-doped copper has recently emerged as an active and stable catalyst for the electrochemical reduction of CO 2 to value-added C 2 products. Here, in this work, we develop a realistic model of CO electroreduction on surface borides of copper under operational conditions, taking into account the effects of electrode potential, electrolyte environment, and pH. We study the possible reconstruction of the electrocatalyst surface using grand canonical DFT and global optimization to obtain a potential-dependent grand canonical ensemble description of metastable, hydrogen-covered catalyst surfaces. Two key surface configurations, low H coverage (LC, −0.6 V SHE ) and high H coverage (HC, −0.8 V SHE ), dominate this ensemble, with the former being kinetically persistent and C 2 selective under strongly reducing conditions. Nonmetallic boron sites on the surface copper boride are found to bind CO more strongly than copper sites, and mechanistic investigation of CO electroreduction pathways presents a surprisingly unconventional case of boron-centered reactivity in contrast to typical copper-centered reactivity. Neighboring boron sites present along boron chains on the surface copper boride are found to facilitate C−C coupling, thereby driving the high C 2 selectivity of this electrocatalyst.

boron-doped copper↗
DOE OSTI2020

Performance and long-term stability of CO 2 conversion to formic acid using a three-compartment electrolyzer design

The electrochemical reduction of CO 2 to formate and formic acid has attracted a great amount of academic and commercial interest over the past five years. A number of experimental studies have generated data on the Faradaic performance and stability of various candidate catalyst materials in producing formate or formic acid. However, most of the data has been conducted at low current densities and over short time periods, typically hours to days. There is a critical need in providing long-term catalyst stability as well as electrolyzer-based operating data, which are needed for the commercial scale-up and operation of this technology, especially at high current densities. In this paper, the electrochemical CO 2 conversion to pure formic acid was conducted using a three-compartment design electrolyzer, demonstrating electrolyzer catalyst and performance stability for over 1000 h at current densities up to 200 mA cm -2 . Depending on the operation conditions, the electrolyzer directly produced a 6.03 to 12.92 wt% (1.3 to 2.8 M) formic acid product at Faradaic efficiencies ranging between 73.0 to 91.3%. Data on electrolyzer performance, including formic acid product generation rate, energy efficiency, and energy consumption are reported at three different current densities, 100, 200, and 250 mA cm -2 . Finally, a long term 1000 h electrolyzer stability run at 200 mA cm -2 is presented, providing information on the operating conditions required in obtaining stable electrolyzer performance. All the data will be extremely useful in the commercial scale-up of this technology.

10 SYNTHETIC FUELS↗
DOE OSTI2023

Mechanistic Insights into Aldehyde Production from Electrochemical CO 2 Reduction on CuAg Alloy via Operando X-ray Measurements

CO 2 electrolysis converts the greenhouse gas CO 2 into valuable fuels and chemicals, such as carbon monoxide, ethylene, ethanol, etc. Currently, Cu is the only known monometallic catalyst capable of producing multicarbon products from electrochemical CO 2 reduction reaction (eCO2RR), while the poor selectivity limits its further use. It has been found that introducing Ag atoms into the Cu lattice can modulate product preference. However, the synergistic effects between Cu and Ag, and thus, the catalytic performance, are strongly influenced by catalyst morphology, electrolyzer configuration, reaction conditions, etc. Operando measurements can provide explicit information on the catalyst dynamic variation during the reaction, but their operation and analysis are challenging. Herein, we prepared CuAg multiphase alloy catalysts by magnetron sputtering, which allowed for investigating the intrinsic interaction between Cu and Ag. eCO2RR performance exhibited an improved selectivity toward carbonyls at the expense of hydrogen and hydrocarbons. The partially alloyed Cu and Ag phases were confirmed by operando X-ray diffraction. By means of combining operando X-ray measurements and density functional theory (DFT) calculations, the preferred carbonyl production is attributed to the reduced electron density and compressive strain of Cu due to Ag incorporation, which leads to a deeper d-band center and therefore weakened intermediate adsorption and oxophilicity. In conclusion, this work provides evidence of the intrinsic structural and electronic interaction between Cu and Ag during eCO2RR. The obtained information will facilitate the design of bi/multi-phase metallic or alloy electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cu Based Dilute Alloys for Tuning the C 2+ Selectivity of Electrochemical CO 2 Reduction

Electrochemical CO 2 reduction is a promising technology for replacing fossil fuel feedstocks in the chemical industry but further improvements in catalyst selectivity need to be made. So far, only copper-based catalysts have shown efficient conversion of CO 2 into the desired multi-carbon (C 2+ ) products. This work explores Cu-based dilute alloys to systematically tune the energy landscape of CO 2 electrolysis toward C 2+ products. Selection of the dilute alloy components is guided by grand canonical density functional theory simulations using the calculated binding energies of the reaction intermediates CO*, CHO*, and OCCO* dimer as descriptors for the selectivity toward C 2+ products. Here, a physical vapor deposition catalyst testing platform is employed to isolate the effect of alloy composition on the C 2+ /C 1 product branching ratio without interference from catalyst morphology or catalyst integration. Six dilute alloy catalysts are prepared and tested with respect to their C 2+ /C 1 product ratio using different electrolyzer environments including selected tests in a 100-cm 2 electrolyzer. Consistent with theory, CuAl, CuB, CuGa and especially CuSc show increased selectivity toward C 2+ products by making CO dimerization energetically more favorable on the dominant Cu facets, demonstrating the power of using the dilute alloy approach to tune the selectivity of CO 2 electrolysis.

36 MATERIALS SCIENCE↗