Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron beam generated plasma”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Evidence of electron microbunching in laser-driven modulated downramp injection and prospects for beam-driven implementation

Plasma accelerators can generate high-energy, high-brightness electron beams over centimeter-scale distances, offering novel pathways to compact x-ray free-electron lasers. Generating beams pre-bunched at the desired radiation wavelength would significantly enhance longitudinal coherence and reduce saturation length. Plasma density-modulated downramp injection offers an in-situ way to generate such beams with nanometer-scale bunching. Here we report the first experimental evidence of this mechanism in a laser-driven wakefield accelerator, showing that modulated density downramps generate modulated electron energy spectra absent in unmodulated cases. Particle-in-cell simulations reproduce these observations and reveal bunching factors of 0.05 at 0.4 μm, with a compression factor of approximately 7. Building on this demonstration, we propose a beam-driven implementation for FACET-II to generate multi-GeV beams pre-bunched at hundreds of nanometers wavelength, with sub-micrometer emittance, kiloampere peak current, and sub-percent slice energy spread. Two-stage magnetic compression enables tunable bunching from optical to extreme ultraviolet wavelengths while achieving peak currents exceeding 100 kA. Coherent transition radiation calculations confirm diagnostic feasibility. This approach offers a promising path towards compact, high-energy pre-bunched electron sources for advanced photon science applications.

electron microbunching↗
DOE OSTI2023

Ion concentration ratio measurements of ion beams generated by a commercial microwave electron cyclotron resonance plasma source

A commercially available electron cyclotron resonance (ECR) plasma source (GenII Plasma Source, tectra GmbH) is widely used for surface processing. This plasma source is compatible with ultrahigh vacuum systems, and its working pressure is relatively low, around 10 –6 –10 –4 Torr even without differential pumping. Here, we report ion flux concentration ratios for each ion species in an ion beam from this source, as measured by a mass/energy analyzer that is a combination of a quadrupole mass spectrometer, an electrostatic energy analyzer, and focusing ion optics. In this study, the examined beams were those arising from plasmas produced from feed gases of H 2 , D 2 , N 2 , O 2 , Ar, and dry air over a range of input power and working pressures. H 2 (D 2 ) plasmas are widely used for nuclear fusion applications and, hence, the ion concentration ratios of H + , H 2 + , and H 3 + reported here will be useful information for research that applies this plasma source to well-controlled plasma-material interaction studies. Ion energy distributions, stability of operation, and impurity concentrations were also assessed for each of the plasma species investigated.

47 OTHER INSTRUMENTATION↗
NASA NTRS1987

Generation of plasma waves by thick-target electron beams, and the expected radiation signature

The production of plasma waves by a nonthermal beam of high-energy electrons injected into a background thermal plasma was investigated. The coupled kinetic equations for nonthermal electrons were solved, and the level of the plasma waves produced by the bump-on-tail instability arising as a result of the Coulomb collisions of nonthermal electrons with background plasma was estimated. In addition, the radiation signatures of these waves were examined. It is shown that the wave-particle interactions have a significant effect on the overall distribution of the electrons and that it is unlikely that such effects can be discerned in the observed bremsstrahlung or synchrotron radiation of the nonthermal electrons. However, a significant fraction of the energy lost by the beam is transferred to plasma waves and is then dissipated by the thermal plasma.

Hamilton, Russell J.↗
NASA NTRS1989

Electrostatic wave generation above and below the plasma frequency by electron beams

The unmagnetized electrostatic dispersion equation is solved numerically to study the growth of electrostatic waves near the plasma frequency resulting from a unstable electron beam. An attempt is made to find the dispersion relations, frequencies of maximum growth, and the resonant or nonresonant character of the waves for particular beam parameters. It is found that the unstable waves do not have the Langmuir dispersion relation except in the limit of a very dilute beam with growth on the connected mode of O'Neil and Malmberg. The properties of the unstable mode depend strongly on beam parameters such as beam density, speed, and temperature.

Cairns, Iver H.↗
NASA NTRSDate not supplied

Environmental and Polarization Characterizations of E-Beam Plasma-Based AlF 3 -Passivated Aluminum Mirrors for Astronomical Telescopes

Astronomical space telescopes to study astrophysical phenomena from the far ultraviolet (FUV) to the near infrared (NIR) will require mirror coatings with high reflectance over this entire spectral region. While coatings for the optical and NIR part of the spectrum are fairly well developed with proven performance, the FUV range has presented significant challenges, particularly below 120nm. Recent developments in electron-beam (e-Beam) generated plasma treatment in a SF 6 environments has enabled the effective passivation of aluminum (Al) coatings for applications in the FUV, by native oxide removal and the formation of a AlF 3 passivation layer which could be tuned to any desired AlF 3 thickness. These results have been produced through a collaboration between the Goddard Space Flight Center (GSFC) and the Naval Research Laboratory (NRL). The passivation experiments have been carried out using the Large Area Plasma Processing System (LAPPS) at NRL using bare aluminum samples and provided by the coating group at GSFC. This novel procedure has demonstrated improved Al mirrors with state-of-the-art FUV reflectivity (e.g. R=91% at 121.6nm). In this paper, we will be reporting on environmental testing, micro-roughness, as well as polarization studies of these E-beam treated samples. These characterizations are being done in order to advance the Technology Readiness Level (TRL) for these Al+AlF 3 mirror coatings produced at LAPPS. The ultimate goal is to demonstrate the promise of using this coating technology to deliver reflectance performance plus stability and uniformity over a large area for a future IR/O/UV space telescope observatory.

FUV reflectance↗
NASA NTRS1983

Electromagnetic radiation from beam-plasma instabilities

A computer simulation is developed for the generation of electromagnetic radiation in an electron beam-plasma interaction. The plasma is treated as a two-dimensional finite system, and effects of a continuous nonrelativistic beam input are accounted for. Three momentum and three field components are included in the simulation, and an external magnetic field is excluded. EM radiation generation is possible through interaction among Langmuir oscillations, ion-acoustic waves, and the electromagnetic wave, producing radiation perpendicular to the beam. The radiation is located near the plasma frequency, and polarized with the E component parallel to the beam. The scattering of Langmuir waves caused by ion-acoustic fluctuations generates the radiation. Comparison with laboratory data for the three-wave interactions shows good agreement in terms of the radiation levels produced, which are small relative to the plasma thermal energy.

Pritchett, P. L.↗
NASA NTRS1995

Mechanism for generation of 2-3 kHz radiation in the outer heliosphere

The question of how low-frequency non-thermal radio emissions at the boundary of the heliosphere might be generated is considered. The mechanism consists of two steps. First, the beam of energetic electrons generates a high level of electrostatic Langmuir plasma waves. Second, electromagnetic radiation results from the non-linear interaction between Langmuir waves. Intensity of radio emissions at 2 to 3 kHz detected by the Voyager plasma wave instrument in the outer heliosphere can be explained provided that the electron beams generating Langmuir waves exist also in the postshock plasma due to secondary shocks in the compressed solar wind beyond the termination shock. Modification of the heliospheric shocks by the cosmic ray pressure is also taken into account. The field strengths of Langmuir waves required to generate the second harmonic emissions are of 50 to 100 microvolts per meter. These waves may be observed in situ by Voyager 1 and 2 in the near future.

Macek, W. M.↗
NASA NTRS1972

A comparison of coupling efficiencies for a Stix coil and an m equals 1 coil

This theoretical and experimental study compares the ion-cyclotron wave generating characteristics of a Stix coil (which generates waves with azimuthal mode number m = 0) with those of a coil which produces primarily m = + or -1 ion-cyclotron modes. The theoretical work of J.E. Hipp, which predicted very good coupling for the m = 1 coil, was extended to determine the scaling laws for plasma column radius and coil wavelength. Experimentally, an m = 1 coil and an m = 0 coil were used to generate ion-cyclotron waves on a beam generated plasma column with electron density = 10 to the 12th power/cu cm. Coupling resonances with peak efficiencies of approximately 40 to 50 percent were measured for both coils in low power (approximately 10k W) experiments. For equal power transfer to the plasma, the m = 0 coil voltage was more than a factor of two greater than that for the m = 1 coil.

Sigman, D. R.↗
DOE OSTI2025

Optical Imaging of Laser-Driven Fast Electron Weibel-like Filamentation in Overcritical Density Plasma

We report on the measurement of filamented transport of laser-generated fast electron beams in near-critical density plasma. A relativistic intensity long-wave-infrared laser irradiated a hydrodynamically shaped helium gas flow at an electron density n e ≃ 10 25 m − 3 , generating a large flux of fast electrons that propagated beyond the critical surface. The beam-to-background electron density ratio was sufficiently high to drive growth of Weibel-like filamentation, which was measured by optical probing to extend up to 800 μ m with radii ∼ 10 μ m . Particle-in-cell simulations reproduce the main features of the filamentation generation, suggesting that collisionless processes are dominant in these interactions. Expansion of the filaments after formation infers a fast electron heated plasma temperature ∼ 400 eV in the overcritical density plasma. Published by the American Physical Society 2025

43 PARTICLE ACCELERATORS↗
NASA NTRS1990

VLF wave emissions by pulsed and dc electron beams in space. II - Analysis of Spacelab 2 results

Results are presented from experiments on the generation of radio frequency waves in space plasmas by the injection of artificial electron beams into ionospheric plasmas that were conducted on the Spacelab 2 Space Shuttle mission. The observations of narrow-band radiation (Reeves et al., 1988) are compared with the prediction of a theory of wave generation by pulsed electron beams (Harker and Banks, 1987). Good agreement is found between the observations and predictions for the s = 0, root 2 solutions representing Cerenkov radiation with wave normal angles less than the Gendrin angle. Also, for broadband emissions, predictions using a single-ion cold plasma theory are compared with the observed features. The broadband dc and pulsed electron beam emissions also have features that can be explained in terms of the characteristics of whistler mode waves produced by Cerenkov resonance.

Reeves, G. D.↗
DOE OSTI2020

Design of target irradiation and diagnostic chamber to study ps-laser generated plasma as a source of singly charged ions for external injection into an electron beam ion source

High repetition-rate (~10 kHz) ps-lasers are becoming available on the market with reasonable cost and may offer several advantages compared to ns-lasers by generating nearly continuous beams of singly charged ions appropriate for the “slow” injection mode into the Electron Beam Ion Source (EBIS). To evaluate these advantages, we will perform studies of a ps-laser generated plasma using a laser with a pulse duration of 8 ps and energy up to 5 mJ per pulse. A vacuum chamber equipped with a 3D target positioner, a focusing lens, and a Faraday Cup has been designed and built for this study. Lens-to-target distance variations have been measured using a laser tracker over the whole range of horizontal and vertical translation for all five targets we will use. The variations were found to be within ±150 µm. This level of “target flatness” should be acceptable for our experimental conditions. Ion currents and ion pulse durations of various elements (from Al to Ta) will be measured for different target irradiation conditions (focal spot size and laser pulse energy). The results obtained will allow us to specify all parameters and geometry of a laser ion source based on a ps-laser to provide external ion injection into the relativistic heavy ion collider EBIS

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Azimuthal and axial structures in 3D particle-in-cell simulation of Penning discharge

We report the results of a 3D particle-in-cell simulation of cylindrical Penning discharge with the axial magnetic field in the so-called reflex configuration, where the cathode and anti-cathode are biased to the same negative potential. The discharge is supported by thermal electron emission from the cathode. Electron and ion collisions, including ionization, are fully accounted for. The emphasis is on a specific regime in which the plasma potential at the center of the discharge is positive with respect to the chamber walls, serving as an anode. Spatial and temporal scales of the observed azimuthal and axial fluctuations and structures are characterized. It is suggested that azimuthal structures are caused by the dissipative gradient-drift instability. We find that the axial fluctuations related to the plasma-beam instabilities are weakly correlated with the azimuthal perturbations of the density, so that the azimuthal modes rotate as a whole and do not show any axial shear. The behavior of the electric potential is more involved, demonstrating intermittent standing wave and propagating structures in the axial direction that modulate the electron transport, producing the standing wave pattern (along the z-direction) in the radial electron flux.

3D PIC simulation of discharge↗
NASA NTRS1993

Plasma emission from isotropic Langmuir turbulence - Are radio microbursts structureless?

The brightness temperature of radio emission through the fundamental and second harmonic plasma processes is determined for isotropic Langmuir waves of low-energy density in order to account for the microbursts at meter-dekameter wavelengths. The probable cause for low levels of Langmuir turbulence is the presence of isotropic density fluctuations in the corona which isotropize the beam-generated Langmuir waves. We determined the energy density of Langmuir waves attainable from the beam-plasma instability in the presence of isotropic density fluctuations. Since the electron density fluctuations isotropize the beam-generated plasma waves, the head-on collision of plasma waves becomes efficient to produce the second harmonic plasma emission. For reasonable beam parameters, the brightness temmperature of the fundamental never exceeds 10 exp 6 K, while the second harmonic covers the observed range of microburst brightness temperatures. Thus, the microbursts are predominantly at second harmonic. This leads to an important conclusion that the microbursts are structureless, similar to a population of normal type III bursts of low polarization with no fundamental-harmonic structure.

Gopalswamy, N.↗
DOE OSTI2022

Stable electron beam propagation in a plasma column

The stability of plasma-based accelerators against transverse misalignments and asymmetries of the drive beam is crucial for their applicability. Without stabilizing mechanisms, even small initial offsets of the drive beam centroid can couple coherently to the plasma wake, grow, and ultimately lead to emittance degradation or beam loss for a trailing witness beam. In this work, we demonstrate the intrinsic stability of a beam propagating in a plasma column. This result is relevant in the context of plasma-based positron acceleration, where a wakefield suitable for the transport and acceleration of a positron witness beam is generated in a plasma column by means of an electron drive beam. The stable propagation of the drive beam is a necessary condition for the experimental implementation of this scheme. The differences and similarities of stabilizing mechanisms in a plasma column compared to a homogeneous plasma are identified via theory and particle-in-cell simulations. Experimental tolerances are given, demonstrating the experimental feasibility of the scheme.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗