Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Light-induced electron dynamics of molecules in cavities: comparison of model Hamiltonians

The rapidly expanding field of polaritonic chemistry requires accurate theoretical simulations to understand new phenomena at the atomic scale. Computing the optoelectronic properties of molecules using established electronic structure methods is a careful balance of accuracy and computational expense, and expanding these methods to quantum electrodynamics to describe coupled cavity-molecule systems is an active topic of development. Key to these methods are the Hamiltonian operators representing the photon cavity modes. The recently introduced quantum electrodynamics time-dependent configuration interaction (QED-TDCI) method allows for the combination of electron dynamics simulations with quantum electrodynamics, enabling the simulation of time-dependent optoelectronic properties of cavity-molecule systems. Using this method, a comparison of two many-state QED Hamiltonians—the Pauli-Fierz and quantum Rabi model Hamiltonians—is presented, with a particular focus on time-dependent properties in applied electric fields.

Peyton, Benjamin G. (ORCID:0000000163190751)↗
DOE OSTI2025

The electronic structure, crystal fields, and magnetic anisotropy in RECo 5 magnets

The current progress in describing rare-earth-based magnets' electronic structure and magnetic properties is discussed. We use several currently popular electronic structure methods to show the typical values of critical parameters that define the physics of RECo 5 (RE = rare earth atom) materials. The magnetic moments and magnetic anisotropy of 4f atoms are obtained using several approaches, including anisotropic 4f-charge density-constrained DFT and DFT+HI methods. We also suggest the introduction of "penalty" functional for obtaining correct variational total energy in the traditional Hund's rule-constrained DFT-based techniques. The applicability and future extensions are discussed. The proposed combination of methods is potentially suitable for high-throughput computational searches of new rare-earth-containing magnetic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Computing Reaction Kinetics with MC-PDFT–OPESf: Combining Multireference Electronic Structure Theory and Enhanced Sampling

Accurate rate constants are crucial for understanding and optimizing catalytic reactions mediated by enzymes, metalloproteins, and heterogeneous catalysts. These systems frequently present a dual computational challenge. Multiconfigurational reaction sites require multireference techniques for the accurate treatment of the electronic structure, and high activation barriers prevent efficient sampling of unbiased reactive transitions. In this work, we combine multiconfiguration pair-density functional theory (MC-PDFT) as an accurate and efficient multireference electronic structure method with on-the-fly probability-enhanced sampling flooding (OPESf) as an enhanced sampling method capable of accelerating reactive transitions. We demonstrate the approach on the Diels–Alder [4+2] cycloaddition between cis-butadiene and ethene as a reaction characterized by a large activation barrier and multireference character. MC-PDFT–OPESf provides reaction rates in agreement with experiments at a fraction of the computational cost required by conventional unbiased ab initio calculations. Here, we propose MC-PDFT–OPESf as an efficient approach for computing kinetics in strongly correlated molecular systems.

Chemical calculations↗
DOE OSTI2025

Cartesian equivariant representations for learning and understanding molecular orbitals

Qualitative and quantitative orbital properties such as bonding/antibonding character, localization, and orbital energies are critical to how chemists understand reactivity, catalysis, and excited-state behavior. Despite this, representations of orbitals in deep learning models have been very underdeveloped relative to representations of molecular geometries and Hamiltonians. Here, we apply state-of-the-art equivariant deep learning architectures to the task of assigning global labels to orbitals, namely energies characterizations, given the molecular coefficients from Hartree–Fock or density functional theory. The architecture we have developed, the Cartesian Equivariant Orbital Network (CEONET), shows how molecular orbital coefficients are readily featurized as equivariant node features common to all graph-based machine-learned potentials. We find that CEONET performs well at predicting difficult quantitative labels such as the orbital energy and orbital entropy. Furthermore, we find that the CEONET representation provides an intuitive latent space for differentiating orbital character for the qualitative assignment of e.g. bonding or antibonding character. In addition to providing a useful representation for further integrating deep learning with electronic structure theory, we expect CEONET to be useful for automatizing and interpreting the results of advanced electronic structure methods such as complete active space self-consistent field theory. In particular, the ability of CEONET to infer multireference character via the orbital entropy paves the way toward the machine-learned selection of active spaces.

chemical reactions↗
DOE OSTI2025

Advances and Challenges of SCAN and r 2 SCAN Density Functionals in Transition‐Metal Compounds

ABSTRACT Transition‐metal compounds (TMCs) with open‐shell d ‐electrons are characterized by a complex interplay of lattice, charge, orbital, and spin degrees of freedom, giving rise to various fascinating applications. Often exhibiting exotic properties, these compounds are commonly classified as correlated systems due to strong inter‐electronic interactions called Hubbard U . This inherent complexity presents significant challenges to Kohn‐Sham density functional theory (KS‐DFT), the most widely used electronic structure method in condensed matter physics and materials science. While KS‐DFT is, in principle, exact for the ground‐state total energy, its exchange‐correlation energy must be approximated in practice. The mean‐field nature of KS implementations, combined with the limitations of current exchange‐correlation density functional approximations, has led to the perception that DFT is inadequate for correlated systems, particularly TMCs. Consequently, a common workaround involves augmenting DFT with an on‐site Hubbard‐like U correction. In recent years, the strongly constrained and appropriately normed (SCAN) density functional, along with its refined variant r 2 SCAN, has achieved remarkable progress in accurately describing the structural, energetic, electronic, magnetic, and vibrational properties of TMCs, challenging the traditional perception of DFT's limitations. This review explores the design principles of SCAN and r 2 SCAN, highlights their key advancements in studying TMCs, explains the mechanisms driving these improvements, and addresses the remaining challenges in this evolving field.

Zhang, Yubo [Minjiang Collaborative Center for The↗
DOE OSTI2024

Machine learning for accuracy in density functional approximations

Machine learning techniques have found their way into computational chemistry as indispensable tools to accelerate atomistic simulations and materials design. In addition, machine learning approaches hold the potential to boost the predictive power of computationally efficient electronic structure methods, such as density functional theory, to chemical accuracy and to correct for fundamental errors in density functional approaches. In this paper, recent progress in applying machine learning to improve the accuracy of density functional and related approximations is reviewed. Promises and challenges in devising machine learning models transferable between different chemistries and materials classes are discussed with the help of examples applying promising models to systems far outside their training sets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Excited state electronic structure of dimethyl disulfide involved in photodissociation at ∼200 nm

Dimethyl disulfide (DMDS), one of the smallest organic molecules with an S–S bond, serves as a model system for understanding photofragmentation in polypeptides and proteins. Prior studies of DMDS photodissociation excited at ∼266 nm and ∼248 nm have elucidated the mechanisms of S–S and C–S bond cleavage, which involve the lowest excited electronic states S 1 and S 2 . Far less is known about the dissociation mechanisms and electronic structure of relevant excited states of DMDS excited at ∼200 nm. Herein we present calculations of the electronic structure and properties of electronic states S 1 –S 6 accessed when DMDS is excited at ∼200 nm. Our analysis includes a comparison of theoretical and experimental UV spectra, as well as theoretically predicted one-dimensional cuts through the singlet and triplet potential energy surfaces along the S–S and C–S bond dissociation coordinates. Finally, we present calculations of spin–orbit coupling constants at the Franck–Condon geometry to assess the likelihood of ultrafast intersystem crossing. We show that choosing an accurate yet computationally efficient electronic structure method for calculating the S 0 –S 6 potential energy surfaces along relevant dissociation coordinates is challenging due to excited states with doubly excited character and/or mixed Rydberg-valence character. Our findings demonstrate that the extended multi-state complete active space second-order perturbation theory (XMS-CASPT2) balances this computational efficiency and accuracy, as it captures both the Rydberg character of states in the Franck–Condon region and multiconfigurational character toward the bond-dissociation limits. In conclusion, we compare the performance of XMS-CASPT2 to a new variant of equation of motion coupled cluster theory with single, double, and perturbative triple corrections, EOM-CCSD(T)(a)*, finding that EOM-CCSD(T)(a)* significantly improves the treatment of doubly excited states compared to EOM-CCSD, but struggles to quantitatively capture asymptotic energies along bond dissociation coordinates for these states.

Rishi, Varun↗
DOE OSTI2026

Low-cost calculation and analysis of 2D IR spectra of model diiron trinitrosyl complexes in the NO stretch region with vibrational perturbation theory

Two-dimensional infrared spectroscopy offers unique capabilities for probing vibrational coupling in complex metal–ligand systems. In this paper, we combine two-dimensional infrared spectroscopy with vibrational perturbation theory to investigate vibrational coupling in a diiron trinitrosyl complex across three stable redox states. Although these systems are challenging for electronic structure methods, we demonstrate that key features of experimental 2D IR spectra can be accurately reproduced using reduced-dimensional anharmonic calculations with a small harmonic frequency scaling. Analysis reveals that N–O stretching modes maintain high locality across all redox states, with coupling patterns that directly reflect variations in Fe–N bond strength. Using curvilinear coordinate analysis, we demonstrate these differences result from systematic changes in cubic anharmonic force constants rather than mode delocalization. Our results establish N–O stretches as sensitive probes of metal–ligand bonding strength, expanding the toolkit for studying biologically relevant nitrosyl complexes.

Moran, Hayden A. [Texas A&M University, College St↗
DOE OSTI2026

Strong field ionization and dissociation dynamics of vinyl bromide (C 2 H 3 Br) initiated by few-cycle pulses

Photoelectron-photoion (PEPICO) and photoion-photoion (PIPICO) coincidence measurements, coupled with a few-cycle intense laser field, were employed to investigate strong field ionization/dissociation dynamics of vinyl bromide (C₂H₃Br). The angular streaking technique was used to map the recoil-frame angle-dependent ionization rates to identify ionizing orbitals. Dissociative single ionization was mainly attributed to ionizing the lower lying molecular orbitals, suggesting that direct ionization dominates with few-cycle pulses. Three dissociative double ionization channels, both prompt and delayed fragmentation, were identified. Theoretical analysis using time-dependent configuration interaction with complex absorbing potential (TDCI-CAP) and high-level electronic structure methods was performed to elucidate the underlying ionization and dissociation mechanisms.

Olowolafe, Temitayo A. [Wayne State University, De↗
DOE OSTI2025

Taming the virtual space for incremental full configuration interaction

Incremental full configuration interaction (iFCI) closely approximates the FCI limit with polynomial cost through a many-body expansion of the correlation energy, providing highly accurate total energies within a given basis set. To extend iFCI beyond previous basis set limitations, this work introduces a novel natural orbital (NO) screening approach, incremental NO full configuration interaction (iNO-FCI). By consideration of the importance of virtual orbital selection in the convergence of iFCI, iNO-FCI maximizes the consistency between orbitals selected for each correlated body. iNO-FCI employs a principle of cancellation of errors and ensures that the same set of virtual NOs is used for interdependent terms. Here, this strategy significantly reduces computational cost without compromising precision. Computational savings of up to 95% are demonstrated, allowing access to larger basis sets that were previously computationally prohibitive. iNO-FCI is herein introduced and benchmarked for several difficult test cases involving double-bond dissociation, biradical systems, conjugated π systems, and the spin gap of a Cu-based transition metal complex.

Correlation energy↗
DOE OSTI2026

Ground and excited state gradients with end-to-end differentiable semiempirical quantum chemistry

Accurate and efficient gradients of molecular energy with respect to nuclear degrees of freedom are essential for geometry optimization and molecular dynamics, including simulations that go beyond the Born–Oppenheimer regime. A common approach involves deriving analytical formulas for new electronic structure methods, which is often conceptually difficult and requires tedious coding. Here, we implement analytical, semi-numerical, and automatic differentiation (AD)-based gradient pathways for semiempirical Hamiltonian models in the PYSEQM software package, leveraging both graphics processing unit (GPU) and central processing unit (CPU) architectures. We further extend these capabilities to excited states calculated using the configuration interaction singles and time-dependent Hartree–Fock ansätze. We benchmark wall time, peak memory usage, and accuracy across three molecular families of varying chemical complexity, including systems of up to a thousand atoms. For ground-state simulations, analytical and AD gradients achieve near-identical GPU runtimes, while semi-numerical gradients are slower on GPU but remain competitive on CPU. For excited states, both analytical and custom AD approaches using implicit differentiation show similar performance and low memory requirements, whereas gradients with full AD are memory-limited. AD gradients match analytical ones in accuracy across all tested systems, aided by a quaternion-based diatomic frame rotation for two-center quantities that ensures smooth energy surfaces. Overall, automatic differentiation emerges as a practical alternative to analytical gradients in semiempirical quantum chemistry, offering high accuracy while allowing seamless integration in AI-driven workflows and popular packages, such as PyTorch and JAX. Our results provide actionable guidance for selecting optimal gradient strategies in large-scale ground- and excited-state molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Uncertainty Quantification for Electronic Hamiltonian

This program will generate random points for electrons within the dimensions given by a parameter input file. Based on these randomly generated electron positions and the nuclear positions given by a position input file it will generate a value for the total electronic energy of an isolated system. This total electronic energy is calculated using the electronic Hamiltonian for a monoatomic system with atoms having the same number of protons and neutrons. The size of the system is defined by the parameter input file. The program will do this many times to generate a distribution of theoretically possible electronic total energies of the system. A user can then compare the total electronic energy given by their electronic structure method to make sure it falls within the distribution of theoretically possible values.

Savchick, JuniperC↗
DOE OSTI2026

Quantum Computing Algorithms and Applications for Coherent and Strongly Correlated Chemical Systems

This project advanced quantum algorithms, quantum information theory, strongly correlated electronic structure methods, molecular quantum materials, and exciton transport imaging in coherent condensed phase systems. Across the award period, the team developed new methods for open-quantum-system simulation, Hamiltonian learning, state tomography, reduced-density-matrix and contracted-quantum eigensolver approaches, and quantum diagnostics for device capability and openness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

Ab initio characterization of ClOOH - Implications for atmospheric chemistry

The equilibrium structure, dipole moment, harmonic vibrational frequencies, and infrared intensities of ClOOH are determined using the CCSD(T) (singles and doubles coupled-cluster theory plus a perturbational estimate of the effects of connected triple excitations) electronic structure method in conjunction with a TZ2P (triple xi plus double polarization) basis set. The heat of formation of CIOOH is determined (using two different isodesmic reactions) to be +1.5 +/- 1 kcal/mol at 0 K or +0.2 +/- 1 kcal/mol at 298.15 K. Using the computed heat of formation, we examined the stability of ClOOH with respect to the ClO + OH, ClOO + H, and HOO + Cl dissociation limits. Since ClOOH is found to be quite stable, it is argued that the chemistry of ClOOH should be included in any accurate modeling of the stratosphere.

Lee, Timothy J.↗
NASA NTRS1993

The (FHCl)- molecular anion - Structural aspects, global surface, and vibrational eigenspectrum

State of the art ab initio electronic structure methods have been used to investigate the (FHCl)- molecular anion. It is proposed that the geometric structure and binding energies of the complex are r(e)(H-F) = 0.963 +/- 0.003 A, R(e)(H-Cl) = 1.925 +/- 0.015 A, and D0(HF + Cl(-)) = 21.8 +/- 0.4 kcal/mol. A Morokuma decomposition of the ion-molecular bonding give the following electrostatic, polarization, exchange repulsion, dispersion, and charge-transfer plus higher-order mixing components of the vibrationless complexation energy: -27.3, -5.2, +18.3, -4.5, and -5.0 kcal/mol, respectively. A couples cluster single and doubles global surface is constructed from 208 and 228 energy points for linear and bent configurations, respectively, these being fit to rms errors of only 3.9 and 9.3/cm, respectively, below 8000/cm. Converged J = 0 and J = 1 variational eigenstates of the (FHCl)- surface to near the HF + Cl(-) dissociation threshold are determined. The fundamental vibrational frequencies are found to be nu1 = 247/cm, nu2 = 876/cm, and nu3 = 2884/cm. The complete vibrational eigenspectrum is analyzed.

Klepeis, Neil E.↗
NASA NTRS1999

Nano-Plasticity of Single-Wall Carbon Nanotubes Under Uniaxial Compression

Nano-plasticity of thin single-wall carbon nanotubes under uniaxial compression is investigated through generalized tight-binding molecular dynamics (GTBMD) and ab-initio electronic structure methods. A novel mechanism of nano-plasticity of carbon nanotubes under uniaxial compression is observed in which bonding geometry collapses from a graphitic (sp(sup 2)) to a localized diamond like (sp(sup 3)) reconstruction. The computed critical stress (approximately equals 153 G Pa) and the shape of the resulting plastic deformation is in good agreement with recent experimental observation of collapse and fracture of compressed carbon nanotubes in polymer composites.

Srivastava, Deepak↗
NASA NTRS2001

Ab Initio and Improved Empirical Potentials for the Calculation of the Anharmonic Vibrational States and Intramolecular Mode Coupling of N-Methylacetamide

The second-order Moller-Plesset ab initio electronic structure method is used to compute points for the anharmonic mode-coupled potential energy surface of N-methylacetamide (NMA) in the trans(sub ct) configuration, including all degrees of freedom. The vibrational states and the spectroscopy are directly computed from this potential surface using the Correlation Corrected Vibrational Self-Consistent Field (CC-VSCF) method. The results are compared with CC-VSCF calculations using both the standard and improved empirical Amber-like force fields and available low temperature experimental matrix data. Analysis of our calculated spectroscopic results show that: (1) The excellent agreement between the ab initio CC-VSCF calculated frequencies and the experimental data suggest that the computed anharmonic potentials for N-methylacetamide are of a very high quality; (2) For most transitions, the vibrational frequencies obtained from the ab initio CC-VSCF method are superior to those obtained using the empirical CC-VSCF methods, when compared with experimental data. However, the improved empirical force field yields better agreement with the experimental frequencies as compared with a standard AMBER-type force field; (3) The empirical force field in particular overestimates anharmonic couplings for the amide-2 mode, the methyl asymmetric bending modes, the out-of-plane methyl bending modes, and the methyl distortions; (4) Disagreement between the ab initio and empirical anharmonic couplings is greater than the disagreement between the frequencies, and thus the anharmonic part of the empirical potential seems to be less accurate than the harmonic contribution;and (5) Both the empirical and ab initio CC-VSCF calculations predict a negligible anharmonic coupling between the amide-1 and other internal modes. The implication of this is that the intramolecular energy flow between the amide-1 and the other internal modes may be smaller than anticipated. These results may have important implications for the anharmonic force fields of peptides, for which N-methylacetamide is a model.

Gregurick, Susan K.↗
DOE OSTI2024

Defect Equilibria from First Principles: From Widegap Oxides to Topological Semimetals

Materials functionality and performance is rarely determined by the ideal crystal alone but is usually affected by formation of imperfections and the solution of impurities. In some applications, such as solar thermochemical hydrogen generation, defect formation is the fundamentally enabling mechanism of the desired functionality. In other cases, such as Cd3As2 topological semimetals, unintentional self-doping presents an obstacle to the access to the unique electronic properties. In either case, a quantitative understanding of the relevant defect mechanism is essential for developing design strategies. This presentation will touch upon numerous aspects in the computational simulation of defect equilibria, including non-equilibrium design strategies, the coupling of solid state and gas-phase reactions, dopant-defect and defect-defect interactions, both attractive and repulsive, the accuracy of total energy functionals and electronic structure methods, and the role of the shape of the density of states for the charge balance condition and Fermi level position, as well as machine-learning prediction of defect energies (1). Specific materials systems include Ga2O3 (2), Cd3As2 (3), and (Sr,Ce)MnO3 (4). (1) M.D. Witman, A. Goyal, T. Ogitsu, A.H. McDaniel, S. Lany, Nat. Comput. Sci. 3, 675 (2023). (2) A. Goyal, A. Zakutayev, V. Stevanovic, S. Lany, J. Appl. Phys. 129, 245704 (2021). (3) C. Brooks, M. van Schilfgaarde, D. Pashov, J.N. Nelson, K. Alberi, D.S. Dessau, S. Lany, Phys. Rev. B 107, 224110 (2023). (4) A. Goyal, M.D. Sanders, R.P. O'Hayre, S. Lany, PRX Energy 3, 013008 (2024).

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,M↗