Search NASA⌕ Search

SEARCH · Search NASA

Results for “equilibrium constant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Adsorption of humic acids and trace metals in natural waters

Studies concerning the interactions between suspended hydrous iron oxide and dissolved humic acids and trace metals are reported. As a major component of dissolved organic matters and its readiness for adsorption at the solid/water interface, humic acids may play a very important role in the organometallic geochemistry of suspended sediments and in determining the fate and distribution of trace metals, pesticides and anions in natural water systems. Most of the solid phases in natural waters contain oxides and hydroxides. The most simple promising theory to describe the interactions of hydrous iron oxide interface is the surface complex formation model. In this model, the adsorptions of humic acids on hydrous iron oxide may be interpreted as complex formation of the organic bases (humic acid oxyanions) with surface Fe ions. Measurements on adsorptions were made in both fresh water and seawater. Attempts have been made to fit our data to Langmuir adsorption isotherm. Adsorption equilibrium constants were determined.

Leung, W. H.↗

Measured ion-molecule reaction rates for modelling Titan's atmosphere

Rate coefficients for several two- and three-body ion-molecule reactions involving hydrocarbons have been determined at thermal energies and above using drift tube-mass spectrometer techniques. The measured rates for clustering and breakup reactions involving CH5(+) and C2H5(+) ions in methane are found to be strongly temperature dependent in the range from 80 to 240 K. The equilibrium constants determined for these reactions differ somewhat from those of Hiraoka and Kebarle (1975). Rate coefficients for two-body reactions of CH5(+), C2H5(+), N(+), H(+), and D(+) ions with methane and/or ethane have been measured. The results indicate that the product yields of several of the fast ion-molecule reactions depend strongly on ion energy (temperature), and therefore previous room-temperature results may be of limited value for model calculations of Titan's atmosphere.

Dheandhanoo, S.↗

Pressure and temperature dependence of the reaction NO2 + NO3 + M yields N2O5 + M

The pressure and temperature dependences of the reaction NO2 + NO3 + M which yields N2O5 + M are investigated by using the flash photolysis/visible absorption technique in which the pseudo-first-order decay of NO3 is monitored as a function of total pressure (20-700 torr), diluent gas (M = He and N2), and temperature (236-358 K). The reaction is found to be in the falloff region in the 20-700 torr pressure range with collision efficiencies increasing in the order He less than N2. Falloff parameters are obtained by fitting the experimental data to the falloff equation of Troe and co-workers. The expression for k1(N2 concentration, T) is obtained and compared with the evaluations presented in the NASA (DeMore, 1983) and CODATA (Baulch et al., 1982) reviews of kinetic data for atmospheric chemistry. Both evaluations are based on N2O5 thermal decomposition data coupled with estimates of the equilibrium constant. The significance of the reactions for atmospheric chemistry rests not only on their rates but on the extent to which they result in a permanent sink for NOX.

Kircher, C. C.↗

Review and analysis of high temperature chemical reactions and the effect of non-equilibrium conditions

Chemical reactions at high temperatures have been considered extensively because of their importance to the heating effects on re-entry of space vehicles. Data on these reactions however, are not abundant and even when found there are discrepancies in data collected by various investigators. In particular, data for recombination reactions are calculated from the dissociation reactions or vice versa through the equilibrium constant. This involves the use of the principle of detailed balancing. This principle is discussed in reference to conditions where it is valid as well as to those where it is not valid. Related topics that merit further study or for which applicable information was available are briefly mentioned in an appendix to this report.

Johnson, R. E.↗

Mechanisms and observations for isotope fractionation of molecular species in planetary atmospheres

Chemcial and physical processes which may give rise to isotope fractionation of molecular species in the atmospheres of both earth and other planets are reviewed, along with observations of isotopically substituted molecules in planetary atmospheres. Mechanisms for production of isotope fractionation considered include atmospheric escape and the effect of isotope substitution on equilibrium constants (including those of phase changes), photolysis rates, and chemical reaction rates. The isotopes considered for compounds in the terrestrial atmosphere include D, T, C-13, C-14, N-15, O-18, and S-34. Compounds for which data about isotopic composition in the terrestrial atmosphere are summarized include CO, CO2, O3, N2O, NH3, SO2, H2S, H2O, H, H2, and CH4. Planetary atmospheres discussed include those of Venus, Mars, Jupiter, Saturn, Uranus, and Titan; isotopes reviewed are D, C-13, N-15, and O-18. Suggestions for additional research in the area of isotopically substituted molecules in atmospheres are offered.

Kaye, Jack A.↗

Charge balancing of trivalent trace elements in olivine and low-Ca pyroxene - A test using experimental partitioning data

Charge-balancing substitution mechanisms are determined for the incorporation of the trivalent cations Al and Sc in low-Ca pyroxene and Al, Sc, Yb, and Cr in olivine. In low-Ca pyroxene, the substitution mechanism is determined by evaluating covariations of trivalent trace cations with Si, Mg, Fe, and Ca. In olivine, substitution mechanisms are determined by comparing the observed compositional dependence of partitioning to the compositional dependence theoretically expected for each substitution reaction. A realistic equilibrium constant is formulated for trace element exchanges between olivines, low-Ca pyroxenes, and melt, making possible improved modeling of the variations of trace element partitioning with temperature and phase composition.

Colson, R. O.↗

Efficient estimation of diffusion during dendritic solidification

A very efficient finite difference method has been developed to estimate the solute redistribution during solidification with diffusion in the solid. This method is validated by comparing the computed results with the results of an analytical solution derived by Kobayashi (1988) for the assumptions of a constant diffusion coefficient, a constant equilibrium partition ratio, and a parabolic rate of the advancement of the solid/liquid interface. The flexibility of the method is demonstrated by applying it to the dendritic solidification of a Pb-15 wt pct Sn alloy, for which the equilibrium partition ratio and diffusion coefficient vary substantially during solidification. The fraction eutectic at the end of solidification is also obtained by estimating the fraction solid, in greater resolution, where the concentration of solute in the interdendritic liquid reaches the eutectic composition of the alloy.

Yeum, K. S.↗

Low temperature measurement of the vapor pressures of planetary molecules

Interpretation of planetary observations and proper modeling of planetary atmospheres are critically upon accurate laboratory data for the chemical and physical properties of the constitutes of the atmospheres. It is important that these data are taken over the appropriate range of parameters such as temperature, pressure, and composition. Availability of accurate, laboratory data for vapor pressures and equilibrium constants of condensed species at low temperatures is essential for photochemical and cloud models of the atmospheres of the outer planets. In the absence of such data, modelers have no choice but to assume values based on an educated guess. In those cases where higher temperature data are available, a standard procedure is to extrapolate these points to the lower temperatures using the Clausius-Clapeyron equation. Last summer the vapor pressures of acetylene (C2H2) hydrogen cyanide (HCN), and cyanoacetylene (HC3N) was measured using two different methods. At the higher temperatures 1 torr and 10 torr capacitance manometers were used. To measure very low pressures, a technique was used which is based on the infrared absorption of thin film (TFIR). This summer the vapor pressure of acetylene was measured the TFIR method. The vapor pressure of hydrogen sulfide (H2S) was measured using capacitance manometers. Results for H2O agree with literature data over the common range of temperature. At the lower temperatures the data lie slightly below the values predicted by extrapolation of the Clausius-Clapeyron equation. Thin film infrared (TFIR) data for acetylene lie significantly below the values predicted by extrapolation. It is hoped to bridge the gap between the low end of the CM data and the upper end of the TFIR data in the future using a new spinning rotor gauge.

Kraus, George F.↗

Eleven-Species Thermochemical Model Of Air

SPECIES program computes thermodynamic and transport properties and equilibrium constants. Uses least-squares polynomial curve fits of most accurate data available to provide requested values more quickly than table-lookup methods. Subroutines computing transport coefficients and collision cross sections include additional code to correct for any electron pressure when working with ionic species. Species represented: diatomic nitrogen, diatomic oxygen, atomic nitrogen, atomic oxygen, nitric oxide, ionized nitric oxide, free electron, ionized atomic nitrogen, ionized atomic oxygen, ionized diatomic nitrogen, and ionized diatomic oxygen. Written in FORTRAN 77.

Thompson, Richard A.↗

Application of physical adsorption thermodynamics to heterogeneous chemistry on polar stratospheric clouds

Laboratory isotherms for the binding of several nonheterogeneously active atmospheric gases and for HCl to water ice are translated into adsorptive equilibrium constants and surface enthalpies. Extrapolation to polar conditions through the Clausius Clapeyron relation yields coverage estimates below the percent level for N2, Ar, CO2, and CO, suggesting that the crystal faces of type II stratospheric cloud particles may be regarded as clean with respect to these species. For HCl, and perhaps HF and HNO3, estimates rise to several percent, and the adsorbed layer may offer acid or proton sources alternate to the bulk solid for heterogeneous reactions with stratospheric nitrates. Measurements are lacking for many key atmospheric molecules on water ice, and almost entirely for nitric acid trihydrate as substrate. Adsorptive equilibria enter into gas to particle mass flux descriptions, and the binding energy determines rates for desorption of, and encounter between, potential surface reactants.

Elliott, Scott↗

Computer program for calculating and fitting thermodynamic functions

A computer program is described which (1) calculates thermodynamic functions (heat capacity, enthalpy, entropy, and free energy) for several optional forms of the partition function, (2) fits these functions to empirical equations by means of a least-squares fit, and (3) calculates, as a function of temperture, heats of formation and equilibrium constants. The program provides several methods for calculating ideal gas properties. For monatomic gases, three methods are given which differ in the technique used for truncating the partition function. For diatomic and polyatomic molecules, five methods are given which differ in the corrections to the rigid-rotator harmonic-oscillator approximation. A method for estimating thermodynamic functions for some species is also given.

Mcbride, Bonnie J.↗

Determination of monomer concentrations in crystallizing lysozyme solutions

We have developed a non-optical technique for the study of aggregation in lysozyme and other protein solutions. By monitoring the rate at which lysozyme traverses a semipermeable membrane it was possible to quantitate the degree of aggregation in supersaturated solutions. Using this technique, we have measured the concentration of monomers and larger aggregates in under- and oversaturated lysozyme solutions, and in the presence of crystals, at pH 4.0 and 3 percent NaCl (0.1M NaAc). Comparison of these concentration profiles with (110) face growth rate data supports the theory that tetragonal lysozyme crystals grow by addition of preformed aggregates and not by monomer addition. The data suggest that a considerable population of aggregates larger than dimers are present at lysozyme concentrations above 22 mg/ml. Determination of dimer concentrations, and equilibrium constants for subsequent aggregation levels, are currently underway.

Wilson, L. J.↗

Computation of iodine species concentrations in water

During an evaluation of the use of iodine as a water disinfectant and the development of methods for measuring various iodine species in water onboard Space Freedom, it became necessary to compute the concentration of the various species based on equilibrium principles alone. Of particular concern was the case when various amounts of iodine, iodide, strong acid, and strong base are added to water. Such solutions can be used to evaluate the performance of various monitoring methods being considered. The authors of this paper present an overview of aqueous iodine chemistry, a set of nonlinear equations which can be used to model the above case, and a computer program for solving this system of equations using the Newton-Raphson method. The program was validated by comparing results over a range of concentrations and pH values with those previously presented by Gottardi for a given pH. Use of this program indicated that there are multiple roots to many cases and selecting an appropriate initial guess is important. Comparison of program results with laboratory results for the case when only iodine is added to water indicates the program gives high pH values for the iodine concentrations normally used for water disinfection. Extending the model to include the effects of iodate formation results in the computer pH values being closer to those observed, but the model with iodate does not agree well for the case in which base is added in addition to iodine to raise the pH. Potential explanations include failure to obtain equilibrium conditions in the lab, inaccuracies in published values for the equilibrium constants, and inadequate model of iodine chemistry and/or the lack of adequate analytical methods for measuring the various iodine species in water.

Schultz, John R.↗

Atmospheric chemistry of the reaction ClO + O2 reversible reaction ClO (center dot) O2: Where it stands, what needs to be done, and why?

Possible existence and chemistry of ClO (center dot) O2 was originally proposed to explain the Norrish-Neville effect that O2 suppresses chlorine photosensitized loss of ozone. It was also thought that ClO (center dot) O2 might have some atmospheric chemistry significance. Recently, doubts have been cast on this proposal, because certain laboratory data seem to imply that the equilibrium constant of the title reaction is so small that ClO (center dot) O2 may be too unstable to matter. However, those data create only a superficial illusion to that effect, because on a closer analysis they do not disprove a moderately stable and chemically significant ClO (center dot) O2. Furthermore, our state-of-the-science accurate computational chemistry calculations also suggest that ClO (center dot) O2 may be a weakly bound ClOOO radical with a reactive (2)A ground electronic state. There is therefore a need to design and perform definitive experimental tests of the existence and chemistry of the ClO (center dot) O2 species, which we discuss and which have the potential to mediate the chlorine-catalyzed stratospheric ozone depletion.

Prasad, Sheo S.↗

Surface acoustic wave oxygen sensor

A surface acoustic wave (SAW) device that responds to oxygen pressure was developed by coating a 158 MHz quartz surface acoustic wave (SAW) device with an oxygen binding agent. Two types of coatings were used. One type was prepared by dissolving an oxygen binding agent in a toluene solution of a copolymer containing the axial ligand. A second type was prepared with an oxygen binding porphyrin solution containing excess axial ligand without a polymer matrix. In the polymer based coatings, the copolymer served to provide the axial ligand to the oxygen binding agent and as a coating matrix on the surface of the SAW device. The oxygen sensing SAW device has been shown to bind oxygen following a Langmuir isotherm and may be used to measure the equilibrium constant of the oxygen binding compound in the coating matrix.

Collman, James P.↗

Thermochemistry and Kinetics of the Cl+O2 Association Reaction

Laser flash photolysis of Cl2/O2 mixtures has been employed in conjunction with Cl((sup 2)P(sub 3/2)) detection by time-resolved fluorescence spectroscopy to investigate equilibration kinetics for the reactions Cl + O2 + O is in equilibrium with ClOO + O2 at temperatures of 181-200 K and O2 pressures of 15-40 Torr. The third-order rate coefficient for the association reaction at 186.5 +/- 5.5 K is (8.9 +/- 2.9) x 10(exp -33) cm(exp 6) molecule(exp -2) s(exp -1) and the equilibrium constant (K(p)) at 185.4 K is 18.9 atm(exp -1) (factor of 1.7 uncertainty). A third law analysis of our data leads to a value for the Cl-OO bond dissociation energy of 4.76 +/- 0.49 kcal mol(exp -1).

Nicovich, J. M.↗

Hydrolysis of Dihydrouridine and Related Compounds

Dihydrouridine is absent from the tRNA of almost all hyperthermophiles and most Archaea but is ubiquitous in the tRNA of Eubacteria and Eukaryotes. In order to investigate whether this could be due to instability, the rate of ring opening of dihydrouridine was measured between 25 and 120 C. The dihydrouridine ring is stable at 25 C, but the half-life at 100 C and pH 7 is 9.1 h, which is comparable to the doubling time of hyperthermophiles. This suggests an explanation for the absence of dihydrouridine from the tRNA of hyperthermophiles. The rates of ring opening of dihydrouracil, dihydrothymine, and 1-N-methyldihydrouracil were measured at 100 C and pH 6-9, as were the equilibrium constants for ring closure of the ureido acids to the dihydrouracils. The pH rate profiles for ring opening and ring closing were calculated from the data. Possible roles for dihydrouracils in the pre-RNA world are discussed.

House, Christopher H.↗

Methods for Determining the Optimum Design of Structures Protected from Aerodynamic Heating and Application to Typical Boost-Glide or Reentry Flight Paths

General equations are developed for the design of efficient structures protected from thermal environments typical of those encountered in boost-glide or atmospheric-reentry conditions. The method is applied to insulated heat-sink stressed-skin structures and to internally cooled insulated structures. Plates loaded in compression are treated in detail. Under limited conditions of plate buckling, high loading, and short flight periods, and for aluminum structures only, the weights of both configurations are nearly equal. Load parameters are found and are similar to those derived in previous investigations for the restricted case of a constant equilibrium temperature at the outside surface of the insulation.

Harris, Robert S., Jr.↗