Search NASA⌕ Search

SEARCH · Search NASA

Results for “equilibrium constant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Amine functionalized supported ionic liquid membranes (SILMs) for CO 2 /N 2 separation

Supported ionic liquid membranes (SILMs), containing aprotic N-heterocyclic anion ionic liquids (AHA ILs) in an inorganic inert support, exhibit CO 2 /N 2 permselectivity values as high as 640 at 35.0 °C and 0.03 bar CO 2 , which represents conditions similar to post-combustion carbon capture (PCCC) from a natural gas power plant. A Fickian model fit to the experimental data estimates CO 2 permeability at direct air capture (DAC) conditions of 10,400 barrer and a CO 2 /N 2 permselectivity of 4000 for the best performing IL, triethyl(octyl)phosphonium 4-bromopyrazolide ([P 2228 ][4-BrPyra]). The most important criterion for high selectivity is a large equilibrium constant for binding between the IL and CO 2 , which results in high CO 2 solubility. ILs with smaller molar volumes and with no fluoroalkyl chains enhance N 2 rejection. As a result, low viscosity and high IL molar density also enhance CO 2 /N 2 permselectivity and CO 2 permeance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Parametric study and speciation analysis of rare earth precipitation using oxalic acid in a chloride solution system

Oxalic acid precipitation is a common step in the purification of rare earth elements (REE) from a concentrated pregnant leach solution (PLS). However, the presence of contaminants such as Al, Fe, and Ca in given amounts decreases the REE precipitation efficiency and product purity while also increasing the amount of oxalic acid needed to maximize recovery. As such, a statistically designed test program was performed to identify the optimal conditions necessary for a relatively low REE content PLS containing elevated concentrations of contaminant ions. The performance objective was maximization of REE precipitation efficiency while minimizing the oxalic acid dosage. A central composite design was utilized to quantify performance impacts and identify the ultimate set of parameter values for oxalic acid dosage, Fe(III) contamination concentration, solution pH, and reaction temperature. The resultant model suggested that oxalic acid dosage and reaction pH are the most significant factors for the REE precipitation efficiency, followed by the interaction of oxalic dosage and Fe concentration. Test results indicate that increasing the oxalic acid concentration from 0 g/L to 80 g/L improved the REE precipitation efficiency from approximately 4.2% to 95.0%. Furthermore, raising the solution pH from 0.5 to 2.5 considerably enhanced the precipitation efficiency from 0.0% to 98.9%. A solution temperature elevation decreased REE recovery, which indicated an exothermic reaction between REEs and oxalate anions. Finally, a high level of Fe contamination adversely impacted REE precipitation efficiency. Here, to further the understanding of the REE-oxalate system, a fundamental solution chemistry study was performed using the equilibrium constants of the reactions. The study resulted in the development of oxalate speciation diagrams and provided an analysis of the REE precipitation characteristics at various oxalate anion concentrations and Fe(III) contamination levels using MINTEQ software. The dominant Fe(III) species in the solution system were found to be Fe-(C 2 O 4 ) 3 3- , Fe-(C 2 O 4 ) 2- , and Fe-(C 2 O 4 ) + , which consume the majority of the oxalate anions. The simulated model was found to be in agreement with the experimental findings and helped to explain the adverse impact of increased iron concentrations on REE precipitation efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Prediction of alkaline earth metal ion adsorption on goethite for various background electrolytes with the CD-MUSIC model

As water scarcity drives the use of more saline water sources, contaminant fate and transport models must capture the impact of high concentrations of alkaline earth metal ions (AEMs) and background electrolytes in these more complex waters. By utilizing macroscopic adsorption data from various electrolyte systems, a Charge Distribution – Multisite Complexation (CD-MUSIC) model, capable of incorporating electrolyte adsorption, was able to accurately simulate the adsorption behavior of alkaline earth metal ions onto goethite. The modeling effort was guided by previous spectroscopic and surface complexation modeling of alkaline earth metal adsorption and built on previous CD-MUSIC modeling that accounted for changes in crystal face contributions to the surface site density as a function of specific surface area. Further, the model was constrained to consider only two dominant surface complex species for each metal ion adsorption reaction. These two species were selected from 44 possible species through objective curve fitting of single-solute macroscopic adsorption data. While most of the alkaline earth metal surface complexes formed outer-sphere complexes at the goethite surface, an inner-sphere species was utilized for Mg 2+ . With the surface complex species and equilibrium constants obtained from this study, the calibrated model successfully predicted alkaline earth metal ion adsorption over a wide range of solution and surface conditions; the model predictions encompassed a wide range of pH (5–11), solute/solid ratio (1.37 × 10 -5 – 8.33 × 10 -4 mol -solute /g -solid ), ionic strengths (0.01 M – 0.7 M), and background electrolytes (Na + , Cs + , Rb + , Cl - , and NO 3 - ) using the same crystal face contribution methodology for site density, capacitance values, and surface acidity constants adopted for proton and cadmium adsorption in previous work (Han and Katz, 2019). Model simulations for a range of background water chemistries demonstrated the potential for Mg 2+ to reduce Cd 2+ adsorption to goethite in model seawater and oil- and gas-produced waters.

42 ENGINEERING↗
DOE OSTI2023

Lewis Acids and Electron-Withdrawing Ligands Accelerate CO Coordination to Dinuclear Cu I Compounds

A series of dinuclear molecular copper complexes were prepared and used to model the binding and Lewis acid stabilization of CO in heterogeneous copper CO 2 reduction electrocatalysts. Experimental studies (including measurement of rate and equilibrium constants) and electronic structure calculations suggest that the key kinetic barrier for CO binding may be a σ-interaction between CuI and the incoming CO ligand. The rate of CO coordination can be increased upon the addition of Lewis acids or electron-withdrawing substituents on the ligand backbone. Conversely, K eq for CO coordination can be increased by adding electron density to the metal centers of the compound, consistent with stronger π-backbonding. Lastly, the electrochemically measured kinetic results were mapped onto an electrochemical zone diagram to illustrate how these system changes enabled access to each zone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Thermochemical Properties of a Water-Soluble Zr(IV)-Flavonolate Complex for Fluoride Sensing

Detection of fluoride in water samples is critical for monitoring many chemical, environmental, and biological processes, however, these measurements often rely on costly instrumentation. Here, this situation has motivated the design of simple to use, fieldable fluoride sensors. Previously, a fluorometric sensor based on (EDTA)­Zr­(H 2 O) 2 (EDTA = ethylenediamine-N,N,N′,N′-tetraacetate) and 3-hydroxyflavone (FlvH) was reported for fluoride detection in ethanol-H 2 O mixtures. Herein, we report the synthesis and characterization of the previously proposed Zr­(IV)-flavonolate complex as the dimethylammonium salt, [(EDTA)­Zr­(Flv)]­[NMe 2 H 2 ] (Flv = 3-hydroxyflavonolate), and detail its utility for aqueous fluoride sensing. This species exhibits an intense blue fluorescence upon excitation with near-UV light (λ ex = 390 nm; λ em = 460 nm) that is quenched in the presence of NaF (100 mM acetate buffer, pH = 5) with good sensitivity (LOD = 20.9 nM; [F – ] from 10 –8 to 10 –4 M) under neat aqueous conditions. The equilibrium constant (K eq = 1.26 ± 0.00184 × 10 8 M –2 ) and free energy (Δ$G^°_{\textrm{rxn}}$ = –11.0 kcal mol –1 ) were determined under the conditions used for fluoride sensing, indicating a highly favorable reaction with F – in water. Finally, we developed paper-based sensing strips for qualitative fluoride sensing by immobilizing the sensor in a deposited gel enabling good selectivity and reduced interference due to slower ion diffusion.

aqueous chemistry↗
DOE OSTI2023

Permittivity Threshold and Thermodynamics of Integer Charge-Transfer Complexation for an Organic Donor–Acceptor Pair

Molecular or chemical-based charge doping provides a means to change the properties (e.g. conductivity) of a material through a complete or partial transfer of charge between its constituents. Understanding how local material environment impacts this process is thus important for controlling the properties of organic materials. This paper presents spectroscopic investigations of molecular charge transfer interactions between a pair of common charge-doping and -transporting materials (2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane, F4TCNQ, and N,N’-Diphenyl-N-N’-di-p-tolylbenzene-1,4-diamine, MPDA). Equilibrium constants associated with charge transfer were determined for donor-acceptor pairs dissolved in a series of solvents covering a range of values of permittivity. A threshold for highly favorable charge separation was observed to occur at a permittivity of ~8-9, with more and less favorable charge separation observed in solvents of higher and lower permittivity, respectively, but with chloroform (permittivity=4.81) exhibiting an anomalously favorable charge separation. Temperature-dependent studies were undertaken to assess the thermodynamics of charge separation. In 1,2- dichloroethane (permittivity=10.36) and chlorobenzene (permittivity=5.62), charge transfer was observed to be both enthalpically and entropically favorable. Charge separation in chloroform is exothermic and entropically disfavored, indicating that specific, inner-shell solvent-solute interactions stabilize the charge-separated complex and result in a net increase in local solution structure. Furthermore, our results provide insight on how modification to the chemical environment may be utilized to support stable charge transfer for molecular doping applications and requiring only modest changes in local permittivity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Probing the Solvation Shells of Lithium Ions in Glyme-Based Electrolytes

Glymes have been extensively studied as solvents for Li-battery electrolytes, most recently in equimolar mixtures with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), due to their ability to form stable solvates. However, directly quantifying free and coordinated glyme molecules in the liquid state has been challenging due to several experimental limitations. Here, in this work, new vibrational probes are demonstrated for studying the solvation structures of diglyme and triglyme in LiTFSI electrolytes. These IR probes make use of an amine group to report the solvation state of glymes at salt-to-solvent molar ratios ranging from 1:5 to 1:10. Characterization of the thermodynamic properties of the solvent exchange occurring in the first solvation shell of lithium ions (Li + ) showed an equilibrium constant for these probes close to unity at room temperature. This result demonstrates that the probes exhibit a similar solvation behavior to their glyme analogue. Concentration dependence studies also revealed a lack of significant amounts of contact ion pairs at the studied concentrations. Moreover, the first solvation shell of Li + appears to be formed by two partially chelating glyme molecules, establishing that even triglyme with multiple chelation sites does not fully coordinate the cation. Complementary molecular dynamics (MD) simulations agree with the experimental results and suggest that at these concentrations, TFSI – predominantly forms solvent-separated ion pairs. However, the simulations do not properly capture the partial solvation structure of the glyme molecules in the solvation shell of Li + as derived from the experiments.

electrolytes↗
DOE OSTI2025

Adsorption Studies of Dilute Krypton and Xenon from Nitrogen on SBMOF-1 and Activated Charcoal for Applications in Isotope Harvesting

Adsorptive partitioning of dilute krypton (Kr) and xenon (Xe) onto Stony Brook Metal–Organic Framework (SBMOF-1) and activated charcoal (AC) from carrier nitrogen was experimentally measured at temperatures ranging from 195 to 293 K. For this purpose, a closed-loop system for gas adsorption experiments was developed. From the Kr adsorption measurements, the adsorption equilibrium constant for Kr on SBMOF-1 was calculated, yielding a value for the enthalpy of adsorption of −19 ± 1 kJ·mol –1 . The partition coefficients were utilized to estimate the extraction rates of 76 Kr, 77 Kr, and 122 Xe isotopes during isotope harvesting at the Facility for Rare Isotope Beams (FRIB). We conclude that both materials showed promising results for the extraction of noble gases from FRIB effluents using temperature swing adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Raman Microscopy Investigation of GLP-1 Peptide Association with Supported Phospholipid Bilayers

A wide range of important biological processes occur at phospholipid membranes including cell signaling, where a peptide or small molecule targets a membrane-localized receptor protein. In this work, we report the adaptation of confocal-Raman microscopy to quantify populations of unlabeled glucagon-like peptide-1 (GLP-1), a membrane-active 30-residue incretin peptide, in supported phospholipid bilayers deposited on the interior surfaces of wide-pore porous silica particles. Quantification of lipid bilayer-associated peptide is achieved by measuring the Raman scattering intensity of the peptide relative to that of the supported-lipid bilayer, which serves as an internal standard. The dependence of the bilayer-associated GLP-1 population on the solution-concentration of GLP-1 produces an isotherm used to determine the equilibrium constant for peptide-bilayer association and the maximum peptide surface coverage. The maximum coverage of GLP-1 in the lipid bilayer was found to be only 1/5th of a full monolayer based on its hydrodynamic radius. The saturation coverage, therefore, is not limited by the size of GLP-1 but by the ability of the bilayer to accommodate the peptide at high concentrations within the bilayer. Raman spectra show that GLP-1 association with the supported bilayer is accompanied by structural changes consistent with the intercalation of the peptide into bilayer, where the observed increase in acyl-chain order would increase the lipid density and provide free volume needed to accommodate the peptide. Furthermore, these results were compared with previous measurements of the association of fluorescently-labeled GLP-1 with a planar-supported bilayer; the unlabeled peptide exhibits a 3-fold greater affinity for the lipid-bilayer on the porous-silica support suggesting that the fluorescent label alters GLP-1 lipid-bilayer association.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Designing Stress-Adaptive Dense Suspensions Using Dynamic Covalent Chemistry

The non-Newtonian behaviors of dense suspensions are central to their use in technological and industrial applications and arise from a network of particle–particle contacts that dynamically adapt to imposed shear. Reported herein are studies aimed at exploring how dynamic covalent chemistry between particles and the polymeric solvent can be used to tailor such stress-adaptive contact networks, leading to their unusual rheological behaviors. Specifically, a room temperature dynamic thia-Michael bond is employed to rationally tune the equilibrium constant (K eq ) of the polymeric solvent to the particle interface. It is demonstrated that low Keq leads to shear thinning, while high K eq produces antithixotropy, a rare phenomenon where the viscosity increases with shearing time. It is proposed that an increase in K eq increases the polymer graft density at the particle surface and that antithixotropy primarily arises from partial debonding of the polymeric graft/solvent from the particle surface and the formation of polymer bridges between particles. Thus, the implementation of dynamic covalent chemistry provides a new molecular handle with which to tailor the macroscopic rheology of suspensions by introducing programmable time dependence. These studies open the door to energy-absorbing materials that not only sense mechanical inputs and adjust their dissipation as a function of time or shear rate but also can switch between these two modalities on demand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Configuration Space Integration for Adsorbate Partition Functions: The Effect of Anharmonicity on the Thermophysical Properties of CO–Pt(111) and CH 3 OH–Cu(111)

A method for computing anharmonic thermophysical properties for adsorbates on metal surfaces has been extended to include libration, or frustrated rotation. Classical phase space integration is used with Monte Carlo sampling of the configuration space to obtain the partition function of CO on Pt(111) and CH 3 OH on Cu(111). A minima-preserving neural network potential energy surrogate is used within the integration routines. Direct state counting using discrete variable representation is used to benchmark the results. We find that the phase space integration approach is in excellent agreement with the direct state counting results. Comparison with standard models such as the harmonic oscillator indicates that anharmonicity contributes significantly to the thermodynamic properties of CH 3 OH on Cu(111). We find that there is also a considerable difference between the harmonic oscillator and phase space integration for CO on Pt(111), although the discrepancy can largely be attributed to the presence of multiple binding sites within the unit cell. We demonstrate that a multisite harmonic oscillator model might be sufficient for CO-Pt(111). A more thorough description of the potential energy surface, which can be achieved with phase space integration, is necessary for weakly bound adsorbates such as CH 3 OH. In conclusion, the thermophysical properties were used to calculate free energies of adsorption on the respective metals, and subsequently the equilibrium constants and Langmuir isotherms in relevant temperature ranges. The results show that the choice of model to obtain partition functions greatly affects the resulting surface coverages in kinetic models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Impact of Particle Size on the Vapor-Phase Oxidative Coupling of Methanol and Dimethylamine over Palladium–Gold Nanoparticles

Oxidative coupling of methanol and dimethylamine in the presence of O 2 in the vapor phase over dilute Pd in Au bimetallic catalysts occurs via the dissociation of O 2 on Pd and selective oxidation of methanol on Au. Here, we synthesize a series of silica-supported PdAu alloy nanoparticle catalysts of varied Pd:Au ratios with ~5 nm particle diameter and show that these catalysts have increased selectivity to dimethylformamide across all Pd:Au ratios (~95%), distinct from observations over larger PdAu nanoparticles (~15–25 nm diameter) of similar Pd:Au ratios. Small monometallic Pd particles are more selective than large monometallic Pd particles, and small Au nanoparticles are reactive and selective for oxidative coupling (while large Au nanoparticles are inactive). Rates per surface metal atom were similar over PdAu nanoparticles of all sizes and increased monotonically with increasing Pd content for the small nanoparticles. Further, apparent reaction kinetics demonstrate distinct apparent methanol reaction order and apparent activation energy relative to those reported over larger nanoparticles of similar Pd:Au ratios. Unlike larger PdAu nanoparticles, the rate of dimethylformamide formation is not promoted by cofed water over small PdAu nanoparticles. The results of the kinetic studies are used to propose a series of elementary steps, derive a plausible rate expression, and regress rate and equilibrium constants. These results suggest high coverages of surface methoxy species and low coverages of adsorbates derived from dimethylamine. Taken together, these results demonstrate the sensitivity of the rates, selectivities, and kinetics of oxidative coupling reactions to the size of bimetallic nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Adsorption of REEs to Kaolinite via Ion Exchange and Surface Complexation as a Function of Water Chemistry

Rare earth elements (REEs) are critical components of modern technology behind renewable energy, transportation, and electronics but have a limited current supply. A substantial portion of global REE production relies on ion adsorption deposits. A high abundance of kaolinite in REE enrichment zones within these deposits suggests that kaolinite controls the subsurface migration of REEs. This study aimed to improve the current understanding of REE binding to kaolinite under varying water chemistry conditions. We conducted batch experiments with kaolinite (KGa-2) and three REEs (Nd, Dy, and Yb) at varying pH, electrolyte concentration, dissolved inorganic carbon (DIC), low molecular weight organic acids (citric and oxalic acids), and total REE concentration conditions. Increasing electrolyte concentration inhibits REE adsorption at pH < 7, suggesting that ion exchange contributes to adsorption at these pH values. DIC affects adsorption above pH 7–8 by forming strong aqueous complexes with heavy REEs. Citric acid decreases REE adsorption via aqueous complexation of REEs at pH > 5 but does not affect adsorption at pH < 5. The surface complexation model captures the main adsorption trends with two mechanisms: ion exchange on basal planes at pH < ∼6 and inner-sphere surface complexation to edge sites at pH > ∼6. Equilibrium constants for surface complexation increase in the order of Yb > Dy > Nd, indicating a higher strength of adsorption for heavy REEs. This study demonstrates how water chemistry conditions control the adsorption mechanisms that may determine the mobility of REEs in subsurface environments rich in kaolinite.

58 GEOSCIENCES↗
DOE OSTI2024

An Explainable Classification Framework for Determining and Understanding the Suitability of Solvent Extraction for Bioproduct Recovery

Lignocellulosic biomass is an abundant feedstock for producing sustainable fuels and chemicals. However, a key challenge in most biomass utilization strategies is the recovery of products from a dilute, typically aqueous, phase. In this respect, liquid–liquid extraction, which relies on a solvent to transfer a product of interest from one liquid phase to another (solvent-rich) phase, is a technology that can reduce the energy requirements for product recovery. To reduce solvent consumption, liquid–liquid extraction needs to be combined with another separation method (e.g., distillation) to recycle the solvent. Despite the research on solvent extraction, there are limited system-wide methods that allow us to determine when extraction is well suited to carry out a specific separation. Accordingly, we present a classification framework to predict whether extraction, coupled with distillation, is feasible and more economical than distillation. Our framework is based on features such as feed composition, liquid–liquid equilibrium constants, relative volatilities, and solvent price, and leads to trained classifiers that show good prediction accuracy. We further study how specific features influence the suitability of extraction. Furthermore, to showcase the applicability of the framework, we use it to analyze the separation of acetic acid from water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Stabilizing Ru-Formyl CO 2 Reduction Intermediates by Formation of Lewis Acid–Base Adducts: A Combined 2DIR and NMR Study

This work demonstrates how the stability of a Ru(II) formyl complex (cis-[Ru(bpy) 2 (CO)(CHO)][PF 6 ]), which is known to decarbonylate to form the metal hydride complex, is greatly enhanced by the addition of a Lewis acidic cation (Li + or Mg 2+ ). Multinuclear NMR is used to measure equilibrium constants of adduct formation, and then ultrafast 2DIR spectroscopy is applied to determine how the electronic structure and local molecular dynamics change upon complexation of the formyl ligand with the Lewis acid. We attribute the stabilization of the complex to the formation of a carbene-like structure where the bond strength between the Ru and the formyl group increases. The change in electronic structure is evidenced by steady-state NMR spectroscopy and DFT calculations. 2DIR measurements further confirm both the complexation of the formyl ligand with the Lewis acid and the change in electronic structure, where changes in vibrational frequency, relaxation kinetics, and a slowdown in the time scale of rotation about the metal-formyl bond are observed in the presence of Lewis acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Free energy difference to create the M-OH* intermediate of the oxygen evolution reaction by time-resolved optical spectroscopy

Theoretical descriptors differentiate the catalytic activity of materials for the oxygen evolution reaction by the strength of oxygen binding in the reactive intermediate created upon electron transfer. Recently, time-resolved spectroscopy of a photo-electrochemically driven oxygen evolution reaction followed the vibrational and optical spectra of this intermediate, denoted M-OH*. However, these inherently kinetic experiments have not been connected to the relevant thermodynamic quantities. Here we discover that picosecond optical spectra of the Ti-OH* population on lightly doped SrTiO 3 are ordered by the surface hydroxylation. A Langmuir isotherm as a function of pH extracts an effective equilibrium constant relatable to the free energy difference of the first oxygen evolution reaction step. Thus, time-resolved spectroscopy of the catalytic surface reveals both kinetic and energetic information of elementary reaction steps, which provides a critical new connection between theory and experiment by which to tailor the pathway of water oxidation and other surface reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Graphical Gaussian Process Regression Model for Aqueous Solvation Free Energy Prediction of Organic Molecules in Redox Flow Battery

The solvation free energy of organic molecules is a critical parameter in determining emergent properties such as solubility, liquid-phase equilibrium constants, and pKa and redox potentials in an organic redox flow battery. In this work, we present a machine learning (ML) model that can learn and predict the aqueous solvation free energy of an organic molecule using Gaussian process regression method based on a new molecular graph kernel. To investigate the performance of the ML model on electrostatic interaction, the nonpolar interaction contribution of solvent and the conformational entropy of solute in solvation free energy, three data sets with implicit or explicit water solvent models, and contribution of conformational entropy of solute are tested. We demonstrate that our ML model can predict the solvation free energy of molecules at chemical accuracy with a mean absolute error of less than 1 kcal/mol for subsets of the QM9 dataset and the Freesolv database. To solve the general data scarcity problem for a graph-based ML model, we propose a dimension reduction algorithm based on the distance between molecular graphs, which can be used to examine the diversity of the molecular data set. It provides a promising way to build a minimum training set to improve prediction for certain test sets where the space of molecular structures is predetermined.

25 ENERGY STORAGE↗