Search NASA⌕ Search

SEARCH · Search NASA

Results for “ether”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A New Class of Ionically Conducting Fluorinated Ether Electrolytes with High Electrochemical Stability

Increasing battery energy density is greatly desired for applications such as portable electronics and transportation. However, many next-generation batteries are limited by electrolyte selection because high ionic conductivity and poor electrochemical stability are typically observed in most electrolytes. For example, ether-based electrolytes have high ionic conductivity but are oxidatively unstable above 4 V, which prevents the use of high-voltage cathodes that promise higher energy densities. In contrast, hydrofluoroethers (HFEs) have high oxidative stability but do not dissolve lithium salt. Here, we synthesize a new class of fluorinated ether electrolytes that combine the oxidative stability of HFEs with the ionic conductivity of ethers in a single compound. We show that conductivities of up to 2.7 × 10 –4 S/cm (at 30 °C) can be obtained with oxidative stability up to 5.6 V. The compounds also show higher lithium transference numbers compared to typical ethers. Furthermore, we use nuclear magnetic resonance (NMR) and molecular dynamics (MD) to study their ionic transport behavior and ion solvation environment, respectively. Finally, we demonstrate that this new class of electrolytes can be used with a Ni-rich layered cathode (NMC 811) to obtain over 100 cycles at a C/5 rate. The design of new molecules with high ionic conductivity and high electrochemical stability is a novel approach for the rational design of next-generation batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Molecular engineering of ethereal electrolyte for ultrastable Si-based high voltage full cells

The successful application of Si-based high-energy Li-ion batteries (LIBs) depends on our ability to tailor electrolyte properties to achieve long-term stability and reliable performance. In this work, we demonstrate our rationale for the molecular design of ethereal solvents to address low anodic stability issues and produce a highly electrochemically stable electrolyte for Si‖LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) high-energy full cells. Unlike the trimethylsilyl group, the trifluoromethyl (–CF 3 ) group exerts a very strong electron-withdrawing effect on the glycol ether backbone, reducing the highest occupied molecular orbital (HOMO) energy level of the fluorinated glycol ether (FGE) and significantly enhancing its oxidation potential. The FGE-based electrolyte enables stable cycling of Si‖NMC811 full cells, delivering high specific capacity (900 mA h g −1 ) and coulombic efficiency (>99.78%) over extended (500) cycles. The improved electrochemical performance originates from the terminal fluorination of the diglyme backbone, which strengthens anion coordination in the solvation structure, leading to the preferential reduction of the FSI anion and the formation of robust solid electrolyte interphases (SEIs) on the Si surface. Through molecular engineering of ethereal solvents, we have discovered a promising candidate for a next-generation stable electrolyte, paving the way for the design of practical and commercially viable Si batteries.

Silicon anode↗
DOE OSTI2024

Self-terminating, heterogeneous solid–electrolyte interphase enables reversible Li–ether cointercalation in graphite anodes

Ether solvents are suitable for formulating solid-electrolyte interphase (SEI)-less ion-solvent cointercalation electrolytes in graphite for Na-ion and K-ion batteries. However, ether-based electrolytes have been historically perceived to cause exfoliation of graphite and cell failure in Li-ion batteries. In this study, we develop strategies to achieve reversible Li–solvent cointercalation in graphite through combining appropriate Li salts and ether solvents. Specifically, we design 1M LiBF 4 1,2-dimethoxyethane (G1), which enables natural graphite to deliver ~91% initial Coulombic efficiency and >88% capacity retention after 400 cycles. We captured the spatial distribution of LiF at various length scales and quantified its heterogeneity. The electrolyte shows self-terminated reactivity on graphite edge planes and results in a grainy, fluorinated pseudo-SEI. The molecular origin of the pseudo-SEI is elucidated by ab initio molecular dynamics (AIMD) simulations. The operando synchrotron analyses further demonstrate the reversible and monotonous phase transformation of cointercalated graphite. Our findings demonstrate the feasibility of Li cointercalation chemistry in graphite for extreme-condition batteries. The work also paves the foundation for understanding and modulating the interphase generated by ether electrolytes in a broad range of electrodes and batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Influence of Ether-Functionalized Pyrrolidinium Ionic Liquids on Properties and Li + Cation Solvation in Solvate Ionic Liquids

Ionic liquids are tunable solvents composed entirely of ions that have properties desirable as electrolytes for lithium batteries such as non-flammability and a large electrochemical stability window. Solvate ionic liquids are a subclass of ionic liquids that consist of a glyme-based solvent and lithium salt in an equimolar ratio, where Li + cation-glyme solvation interactions result in ionic liquid-like properties. LiG4TFSi is a well-studied solvate ionic liquid consisting of equimolar amounts of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and tetraglyme (G4). In this work, pyrrolidinium ionic liquids with ether-functionalized side chains were synthesized containing either one ether (EO1) moiety or three ether (EO3) moieties and mixed with LiG4TFSI to form a new class of electrolyte mixtures. Their physical and transport properties, as well as ion solvation structures, were characterized by electrochemical, thermal, rheological, and spectroscopic measurements. The conductivity of the electrolyte mixture composed of EO1:LiTFSI:G4 in a 1:1:1 molar ratio is 2.54 mS/cm at 30 °C, compared to 1.53 mS/cm for LiG4TFSI, an increase of 67%. A significant decrease in the conductivity to 0.279 mS/cm is observed for the EO3:LiTFSI:G4 mixture in a 1:1:0.4 molar ratio. Pulsed-field gradient nuclear magnetic resonance (PFG-NMR) measurements revealed that the EO1 cation diffuses significantly faster than the EO3 cation in their respective mixtures. Liquid-state 13 C NMR experiments indicate that Li + cations preferentially coordinate with tetraglyme. Li + cations do not coordinate with the EO1 cation and only coordinate with EO3 ether side chains at lower concentrations of tetraglyme. We hypothesize that the oligoether EO3 cation competes with G4 and TFSI - for lithium cation solvation in G4 deficient compositions, leading to a largely adverse effect on the mass transport properties of the electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Tunable Conversion of Poly(Acrylic Acid) to Vinyl Methyl Ether Copolymers via Electrochemical Decarboxylation

Recognizing the potential of polymer-to-polymer transformations for plastics valorization, a new electrochemical strategy for the decarboxylative functionalization of polyacrylates has been developed. In contrast to most electrochemical approaches to plastic waste valorization that use small-molecule mediators or only form deconstruction products, this report describes one of the first direct electrochemical redox upconversions of a commodity polymer and involves activation of poly(acrylic acid), a material commonly found in disposable diapers and other personal hygiene products. Via electrochemical decarboxylation, poly(acrylic acid) is converted to methyl ether-containing copolymers. Although methods to prepare the 1:1 regularly alternating poly(vinyl methyl ether-alt-maleic anhydride) are known, routes to generate copolymers with variable levels of vinyl methyl ether and acrylate moieties are unknown, but such polymers may have utility in similar applications, such as dentifrices. Tunable conversions with up to 62 mol% vinyl methyl ether content were achieved via controlled-current electrolyses at >100 mA. This approach enables efficient access to copolymers with broad range of comonomer content from a common waste polymer starting material.

Dauzvardis, Fabian [University of Delaware, Newark↗
DOE OSTI2023

Exploration of Fuel Property Impacts on the Combustion of Late Post Injections Using Binary Blends and High-Reactivity Ether Bioblendstocks

In this study, the impacts of fuel volatility and reactivity on com- bustion stability and emissions were studied in a light-duty single- cylinder research engine for a three-injection catalyst heating oper- ation strategy with late post-injections. N-heptane and blends of farnesane/2,2,4,4,6,8,8-heptamethylnonane were used to study the im- pacts of volatility and reactivity. The effect of increased chemical reac- tivity was also analysed by comparing the baseline #2 diesel operation with a pure blend of mono-ether components (CN > 100) representa- tive of potential high cetane oxygenated bioblendstocks and a 25 vol.% blend of the mono-ether blend and #2 diesel with a cetane number (CN) of 55. At constant reactivity, little to no variation in combustion performance was observed due to differences in volatility, whereas in- creased reactivity improved combustion stability and efficiency at late injection timings. Fuels with higher reactivity were found to reduce engine-out hydrocarbon and carbon monoxide emissions while also achieving stable combustion at post-injection timings later than those achievable with #2 diesel fuel. The pure ether blend had the latest achievable post-injection timing of +30.5 CAD while still maintaining stable combustion (coefficient of variation of gross-indicated mean ef- fective pressure < 5%). With post-injection timing adjusted to achieve a matched exhaust temperature of 300 °C, the ether-diesel CN 55 blend was observed to have slightly higher thermal efficiency in comparison to the baseline #2 diesel fuel. The results also indicate that cetane num- ber may serve as a good indicator of combustion characteristics at late injection timings used for aftertreatment thermal management opera- tion.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Catalytic upgrading of ethanol to C8+ distillate range ethers via Guerbet coupling and etherification

In this presentation we describe the catalytic approaches for conversion of ethanol into diesel fuel ethers. This involves first alcohol oligomerization, followed by acid-catalyzed dehydration. As we will show in this presentation, ethanol can be converted to higher linear and α-branched alcohols by C-C coupling reactions (ethanol oligomerization) as well as to high molecular weight esters by C-O coupling reactions with Cu/MgxAlOy (CuHT) catalysts. Alcohols may be converted to ethers via bimolecular dehydration in a subsequent step. We have identified more than 160 number of species in the products including alcohols, esters, aldehydes, ketones, and olefins. Alcohols range from C4 to C10. Both alcohols and esters follow a Schulz-Flory chain growth model. We show the relationship between the catalyst properties (BET surface area, acid and base site count and Cu loading and synthesis method) and the performance in the reactions. We also show that physical mixtures of CuHT and HT can have similar product selectivity of low loading CuHT catalysts. The selectivity towards diesel fuel precursor compounds (hereafter ‘DFPC’) increased with conversion until reaching a plateau at high ethanol conversion (~70%). Alcohol selectivity follows a Schultz-Flory distribution at all studied conversions, and that adsorbed ethanol-derived species may undergo surface oligomerization into 1-butanol and higher alcohols before desorbing in a chain-growth mechanism. Zeolite catalysts convert the C4+ alcohols into C8+ ethers in both batch and continuous flow reactors. Selectivities of up to 80% to C8+ ethers at around 70% conversion using a single pass continuous flow system are achieved. The final product feedstocks obtained from etherification have been used in technoeconomic (TEA) and lifecycle analysis (LCA), which indicate a reduction in greenhouse gas (GHG) emissions of 50% relative to conventional diesel and diesel fuel prices that are lower than biodiesel. These final feedstocks are undergoing engine testing to elucidate the physiochemical properties and compare well to diesel #2 ASTM standards.

Huber, George↗
DOE OSTI2023

Exploration of Fuel Property Impacts on the Combustion of Late Post Injections Using Binary Blends and High-Reactivity Ether Bioblendstocks

In this study, the impacts of fuel volatility and reactivity on combustion stability and emissions were studied in a light-duty single-cylinder research engine for a three-injection catalyst heating operation strategy with late post-injections. Here, N-heptane and blends of farnesane/2,2,4,4,6,8,8-heptamethylnonane were used to study the impacts of volatility and reactivity. The effect of increased chemical reactivity was also analysed by comparing the baseline #2 diesel operation with a pure blend of mono-ether components (CN > 100) representative of potential high cetane oxygenated bioblendstocks and a 25 vol.% blend of the mono-ether blend and #2 diesel with a cetane number (CN) of 55. At constant reactivity, little to no variation in combustion performance was observed due to differences in volatility, whereas increased reactivity improved combustion stability and efficiency at late injection timings. Fuels with higher reactivity were found to reduce engine-out hydrocarbon and carbon monoxide emissions while also achieving stable combustion at post-injection timings later than those achievable with #2 diesel fuel. The pure ether blend had the latest achievable post-injection timing of +30.5 CAD while still maintaining stable combustion (coefficient of variation of gross-indicated mean effective pressure < 5%). With post-injection timing adjusted to achieve a matched exhaust temperature of 300 °C, the ether-diesel CN 55 blend was observed to have slightly higher thermal efficiency in comparison to the baseline #2 diesel fuel. The results also indicate that cetane number may serve as a good indicator of combustion characteristics at late injection timings used for aftertreatment thermal management operation.

09 BIOMASS FUELS↗
DOE OSTI2024

Constructing Crown Ether-Based Supramolecular Adhesives with Ambient-Temperature Applicable and Durable Adhesion

Supramolecular adhesives are attracting considerable attentions owing to their dynamic and reversible bonding, while the complex curing conditions and poor performance under extreme conditions severely restrict their applicability. Herein, a series of tetra-crown ether-terminated polyethylene glycol (TCE-PEG) adhesives are presented in which plenty of supramolecular interactions, including Van der Waals, hydrogen bonding, π–π staking, metal coordination, and electrostatic ones, provide strong adhesion on multiple types of substrates. Highly relevant for practical applications, ultra-strong adhesivity of TCE-PEG can be achieved without requiring additional ultraviolet radiation, heat, or chemical treatment at ambient temperature. It also exhibits durable adhesive behavior, excellent underwater stability, and low-temperature tolerance. Especially, by incorporating ionic polymer fragments of polyethyleneimine hydrochloride, additional hydrogen bonding between secondary amines and crown ether rings can be induced to enhance the lap-shear strength to 7.21 MPa due to the formation of supramolecular cross-linked network. Finally, this work pioneers a rather unique supramolecular approach for easily formed, ultra-strong crown-ether-based adhesives bearing great potential for applications in critical environments of limited heat source and unallowed solvent usage.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Insight Into Sulfur‐Containing Additive to Boost Anti‐Oxidation Ability of the Ether‐Based Electrolyte for Sodium‐Ion Full Batteries

Ether-based electrolytes are considered as promising candidates for sodium-ion batteries (SIBs) due to their high ionic conductivity and good compatibility with hard carbon (HC) anode. However, they suffer from poor anti-oxidative ability with unstable cathode electrolyte interface, inducing successive electrolyte decomposition and rapid capacity fading. Herein, the sulfur-containing additive (1,3-propanediol cyclic sulfate, PCS) is introduced to boost the stability of the electrode-electrolyte interface (EEI) in ether-based electrolyte. PCS largely participates in the inner Na + sheath, causing more diglyme (G2) molecules and fewer PF 6 - anions to occupy the inner Na + solvation sheath, avoiding the decomposition of G2 molecules at high operation voltage. Moreover, PCS is beneficial for simultaneously constructing thin and robust sulfur-containing EEI on both Prussian blue (PB) cathode and HC anode, maintaining the structural stability of PB and alleviating the dissolution of transition metals. These enable PB||HC pouch cells to deliver a capacity retention of 60.3% after 400 cycles, significantly higher than the 32.1% in PCS-free electrolytes. In conclusion, this work discloses the underlying mechanism of PCS to evoke the anti-oxidation ability of ether-based electrolyte and provides a promising method for realizing advanced sodium-ion full cells.

anti-oxidation ability↗
DOE OSTI2021

Chemical insights into the multi-regime low-temperature oxidation of di-n-propyl ether: Jet-stirred reactor experiments and kinetic modeling

To further understand the combustion characteristics and the reaction pathways of acyclic ethers, in this work the oxidation of di-n-propyl ether (DPE) was investigated in a jet-stirred reactor (JSR) combined with a photoionization molecular-beam mass spectrometer. The experiments were carried out at near-atmospheric pressure (700 Torr) and over a temperature range of 425–850 K. Based on the experimental data and previous studies on ether oxidation, a new kinetic model was constructed and used to interpret the oxidation chemistry of DPE. In DPE oxidation, a high reactivity at low temperatures and two negative temperature coefficient (NTC) zones were observed. These behaviors are explained in this work by taking advantage of the obtained species information and the modeling analyses: the two NTC zones are caused by the competition of chain branching and termination reactions of the fuel itself and specific oxidation intermediates, respectively. Furthermore, the general requirements to have double-NTC behavior are discussed. A variety of crucial fuel-specific C 6 species, such as ketohydroperoxides and diones, were detected in the species pool of DPE oxidation. Their formation pathways are illuminated based on rate-of-production (ROP) analyses. Propanal was identified as the most abundant small molecule intermediate, and its related reactions have an important impact on the oxidation process of DPE. Both acetic acid and propionic acid were detected in high concentrations. A new formation pathway of propionic acid is proposed and incorporated into the kinetic model to achieve a more accurate prediction for propionic acid mole fractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Phase Transfer‐Mediated Degradation of Ether‐Based Localized High‐Concentration Electrolytes in Alkali Metal Batteries

Abstract Localized high‐concentration electrolytes (LHCEs) have attracted interest in alkali metal batteries due to the advantages of forming stable solid‐electrolyte interphases (SEIs) on anodes and good chemical/electrochemical stability. Herein, a new degradation mechanism is revealed for ether‐based LHCEs that questions their compatibility with alkali metal anodes (Li, Na, and K). Specifically, the ether solvent reacts with alkali metals to generate solvated electrons (e s − ) that attack hydrofluoroether co‐solvents to form a series of byproducts. The ether solvent essentially acts as a phase‐transfer reagent that continuously transfers electrons from solid‐phase metals into the solution phase, thus inhibiting the formation of stable SEI and leading to continuous alkali metal corrosion. Switching to an ester‐based solvating solvent or intercalation anodes such as graphite or molybdenum disulfide has been shown to avoid such a degradation mechanism due to the absence of e s − .

Chen, Xiaojuan↗
DOE OSTI2022

Phase Transfer‐Mediated Degradation of Ether‐Based Localized High‐Concentration Electrolytes in Alkali Metal Batteries

Abstract Localized high‐concentration electrolytes (LHCEs) have attracted interest in alkali metal batteries due to the advantages of forming stable solid‐electrolyte interphases (SEIs) on anodes and good chemical/electrochemical stability. Herein, a new degradation mechanism is revealed for ether‐based LHCEs that questions their compatibility with alkali metal anodes (Li, Na, and K). Specifically, the ether solvent reacts with alkali metals to generate solvated electrons (e s − ) that attack hydrofluoroether co‐solvents to form a series of byproducts. The ether solvent essentially acts as a phase‐transfer reagent that continuously transfers electrons from solid‐phase metals into the solution phase, thus inhibiting the formation of stable SEI and leading to continuous alkali metal corrosion. Switching to an ester‐based solvating solvent or intercalation anodes such as graphite or molybdenum disulfide has been shown to avoid such a degradation mechanism due to the absence of e s − .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Isomer-Dependent Reaction Mechanisms of Cyclic Ether Intermediates: cis -23-Dimethyloxirane and trans -23-Dimethyloxirane.

Oxiranes are a class of cyclic ethers formed in abundance during low-temperature combustion of hydrocarbons and biofuels, either via chain-propagating steps that occur from unimolecular decomposition of β-hydroperoxyalkyl radicals (β-˙QOOH) or from reactions of HÒO with alkenes. The cis- and trans-isomers of 2,3-dimethyloxirane are intermediates of n-butane oxidation, and while rate coefficients for β-˙QOOH → 2,3-dimethyloxirane + OH are reported extensively, subsequent reaction mechanisms of the cyclic ethers are not. As a result, chemical kinetics mechanisms commonly adopt simplified chemistry to describe the consumption of 2,3-dimethyloxirane by convoluting several elementary reactions into a single step, which may introduce mechanism truncation error—uncertainty derived from missing or incomplete chemistry. The present research examines the isomerdependence of 2,3-dimethyloxirane reaction mechanisms in support of ongoing efforts to minimize mechanism truncation error. Reaction mechanisms are inferred via the detection of products from Cl-initiated oxidation of both cis-2,3-dimethyloxirane and trans-2,3-dimethyloxirane using multiplexed photoionization mass spectrometry (MPIMS). The experiments were conducted at 10 Torr and temperatures of 650 K and 800 K. To complement the experiments, the enthalpies of stationary points on the ˙R + O 2 surfaces were computed at the ccCA-PS3 level of theory. In total, 28 barrier heights were computed on the 2,3-dimethyloxiranylperoxy surfaces. Two notable aspects are low-lying pathways that form resonance-stabilized ketohydroperoxide-type radicals caused by ˙QOOH ring-opening when the unpaired electron is localized adjacent to the ether group, and cis-trans isomerization of ˙R and ˙QOOH radicals, via inversion, which enable reaction pathways otherwise restricted by stereochemistry. Several species were identified in the MPIMS experiments from ring opening of 2,3-dimethyloxiranyl radicals. Neither of the two conjugate alkene isomers prototypical of ˙R + O 2 reactions were detected. Products were also identified from decomposition of ketohydroperoxide-type radicals. The present work provides the first analysis of 2,3-dimethyloxirane oxidation chemistry and reveals that consumption pathways are complex and require the expansion of submechanisms in chemical kinetics mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synthesis, Isolation, and Study of Heterobimetallic Uranyl Crown Ether Complexes

Although crown ethers can selectively bind many metal cations, little is known regarding the solution properties of crown ether complexes of the uranyl dication, UO 2 2+ . Here, in this work, the synthesis and characterization of isolable complexes in which the uranyl dication is bound in an 18-crown-6-like moiety are reported. A tailored macrocyclic ligand, templated with a Pt(II) center, captures UO 2 2+ in the crown moiety, as demonstrated by results from single-crystal X-ray diffraction analysis. The U(V) oxidation state becomes accessible at a quite positive potential (E 1/2 ) of –0.18 V vs Fc +/0 upon complexation, representing the most positive U VI /U V potential yet reported for the UO 2 n+ core. Isolation and characterization of the U(V) form of the crown complex are also reported here; there are no prior reports of reduced uranyl crown ether complexes, but U(V) is clearly stabilized by crown chelation. Joint computational studies show that the electronic structure of the U(V) form results in significant weakening of U–O oxo bonding despite the quite positive reduction potential at which this species can be accessed, underscoring that crown-ligated uranyl species could demonstrate unique reactivity under only modestly reducing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Non-polar ether-based electrolyte solutions for stable high-voltage non-aqueous lithium metal batteries

The electrochemical instability of ether-based electrolyte solutions hinders their practical applications in high-voltage Li metal batteries. To circumvent this issue, here, we propose a dilution strategy to lose the Li + /solvent interaction and use the dilute non-aqueous electrolyte solution in high-voltage lithium metal batteries. We demonstrate that in a non-polar dipropyl ether (DPE)-based electrolyte solution with lithium bis(fluorosulfonyl) imide salt, the decomposition order of solvated species can be adjusted to promote the Li + /salt-derived anion clusters decomposition over free ether solvent molecules. This selective mechanism favors the formation of a robust cathode electrolyte interphase (CEI) and a solvent-deficient electric double-layer structure at the positive electrode interface. When the DPE-based electrolyte is tested in combination with a Li metal negative electrode (50 μm thick) and a LiNi 0.8 Co 0.1 Mn 0.1 O 2 -based positive electrode (3.3 mAh/cm 2 ) in pouch cell configuration at 25 °C, a specific discharge capacity retention of about 74% after 150 cycles (0.33 and 1 mA/cm 2 charge and discharge, respectively) is obtained.

25 ENERGY STORAGE↗
DOE OSTI2022

Co-intercalation-free ether electrolytes for graphitic anodes in lithium-ion batteries

Carbonate-based electrolytes are widely used in Li-ion batteries but are limited by a small operating temperature window and poor cycling with silicon-containing graphitic anodes. The lack of non-carbonate electrolyte alternatives such as ether-based electrolytes is due to undesired solvent co-intercalation that occurs with graphitic anodes. Here, we show that fluoroethers are the first class of ether solvents to intrinsically support reversible lithium-ion intercalation into graphite without solvent co-intercalation at conventional salt concentrations. In full cells using a graphite anode, they enable 10-fold higher energy densities compared to conventional ethers, and better thermal stability over carbonate electrolytes (operation up to 60 °C) by producing a robust solvent-derived solid electrolyte interphase (SEI). As single-solvent–single-salt electrolytes, they remarkably outperform carbonate electrolytes with fluoroethylene carbonate (FEC) and vinylene carbonate (VC) additives when cycled with graphite–silicon composite anodes. In conclusion, our molecular design strategy opens a new class of electrolytes that can enable next generation Li-ion batteries with higher energy density and a wider working temperature window.

25 ENERGY STORAGE↗
DOE OSTI2022

Catalytic Upgrading of Ethanol to C8+ Distillate Range Ethers via Guerbet Coupling and Etherification

Guerbet coupling followed by etherification is a two step process for conversion of ethanol into distillate range molecules. This involves first alcohol oligomerization, followed by acid-catalyzed dehydration. As we will show in this presentation, ethanol can be converted to higher linear and α-branched alcohols by C-C coupling reactions (ethanol oligomerization) as well as to high molecular weight esters by C-O coupling reactions with Cu/MgxAlOy (CuHT) catalysts. Alcohols may be converted to ethers via bimolecular dehydration in a subsequent step. We have identified more than 160 number of species in the products including alcohols, esters, aldehydes, ketonces, and olefins. Alcohols range from C4 to C10. Both alcohols and esters follow a Schulz-Flory chain growth model. We show the relationship between the catalyst properties (BET surface area, acid and base site count and Cu loading and synthesis method) and the performance in the reactions. We also show that physical mixtures of CuHT and HT can have similar product selectivity of low loading CuHT catalysts. The selectivity towards diesel fuel precursor compounds (hereafter ‘DFPC’) increased with conversion until reaching a plateau at high ethanol conversion (~70%). Alcohol selectivity follows a Schultz-Flory distribution at all studied conversions, and that adsorbed ethanol-derived species may undergo surface oligomerization into 1-butanol and higher alcohols before desorbing in a chain-growth mechanism. Zeolite catalysts convert the C4+ alcohols into C8+ ethers in both batch and continuous flow reactors. Selectivities of up to 80% to C8+ ethers at around 70% conversion using a single pass continuous flow system are able to be achieved. The final product feedstocks obtained from etherification have been used in technoeconomic (TEA) and lifecycle analysis (LCA), which indicate a reduction in greenhouse gas (GHG) emissions of 50% relative to conventional diesel. These final feedstocks are undergoing engine testing to elucidate the physiochemical properties and will be compared to diesel #2 ASTM standards as a reference and will serve as a basis to improve the final bio-diesel blendstocks from etherification.

Huber, George↗