Search NASA⌕ Search

SEARCH · Search NASA

Results for “excitonic complex”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

pH-Dependent Vibrational Dynamics Drives Excited-State Quenching in the Phycobiliprotein Complex PC645

Phycocyanin 645 (PC645) is a closed-form lightharvesting complex found in the lumen of the photosynthetic membrane of cryptophyte algae. These peripheral antenna complexes contain bilin chromophores that absorb sunlight and transfer excitation energy to the core antenna complexes embedded in the thylakoid membrane. The location of cryptophyte antenna complex on the luminal side of the membrane is unusual. During photosynthetic activity, the pH of the lumen drops, by up to two pH units. There is little known about how this pH-change affects the light-harvesting complexes. In this study, we report multiscale simulations using a computationally efficient density functional tight-binding framework to investigate the spectroscopy and excitation energy transfer in the PC645 complex. Complementary experiments were conducted using both steady-state and time-resolved spectroscopic measurements at low, neutral, and high pH values. Our study shows that (de)protonation of specific bilin pigments, namely, the mesobiliverdins (MBVs), modulates the excitation energies, excitonic couplings, and spectral densities. These changes cause excitation transfer rates to increase by up to a factor of two to three, leading to pH-dependent energy transfer pathways in the complex. Using this model, we calculated the pH-dependent fluorescence quantum yield of the system, obtaining quantitative agreement with the experimental results. These computational simulations, supported by experiments, identify MBVs as a more prominent excitation sink than previously realized, and that this role is tuned by pH.

Maity, Sayan [Constructor Univ., Bremen (Germany);↗
DOE OSTI2025

High‐Temperature Single‐Photon Emission From Covalently Functionalized van der Waals Heterostructures

Two-dimensional (2D) transition metal dichalcogenides (TMDs) such as tungsten diselenide (WSe 2 ) are attractive nanomaterials for quantum information applications due to single-photon emission (SPE) from intrinsic atomic defects. Defect and strain engineering techniques have been developed to produce high purity, deterministically placed SPE in WSe 2 . However, a major challenge in the application of these techniques is the low temperature required to observe defect-bound TMD exciton emission, typically limiting SPE to T < 30 K. SPE at higher temperatures either loses purity or requires integration into complex devices such as optical cavities. Here, 2D heterostructure engineering and molecular functionalization are combined to achieve high purity (>90%) SPE in strained WSe 2 persisting to over T = 90 K. Covalent diazonium functionalization of graphite in layered WSe 2 /graphite heterostructures maintains high purity up to T = 90 K and single-photon source integrity up to T = 115 K. This method preserves the best qualities of SPE from WSe 2 while increasing working temperature to more than three times the typical range. This work demonstrates the versatility of surface functionalization and heterostructure design to synergistically improve the properties of quantum emission and offers new insights into the phenomenon of SPE from 2D materials.

2D materials↗
DOE OSTI2026

Alkali-Metal Interlocking of 2D V 4 O 10 Sheets Defines Discretized Interlayer Shear Relationships

Low-dimensional materials manifest structural anisotropy, quantum confinement, and tightly bound excitonic states, which make them attractive building blocks that can be assembled within three-dimensional laterally stitched heterostructures, stacked van der Waals solids, and complex moiré superlattices. Ion intercalation in the galleries between layered materials provides a means of modifying interlayer separation and coupling, but it is also known to drive the shearing of the layers. In this article, we explore the distinct ligand coordination environments afforded by vanadyl oxygens of singular [V 4 O 10 ] sheets and examine how the size, polarizability, and stoichiometry of Group I cations sandwiched between such layers determine the interlocking of the sheets in stacked structures. Based on the topochemical insertion of alkali-metal ions into the layered λ-V 2 O 5 , we identify seven types of guest ion coordination sites discretized into four distinct regimes of interlayer shear in units of half octahedral widths. The coordination preferences of intercalated cations govern how they interlock 2D [V 4 O 10 ] sheets and engender specific shear conformations. We present evidence that static and dynamic disorder in guest ion arrangement modulate the magnetic structure of the intercalated compounds based on electrostatic polarization, localization of charge and spin density, and lattice distortion. The results illustrate the use of topochemical ion insertion to modulate stacking relationships and magnetic transition characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Low Frequency Vibrational Modes of Two-Dimensional Lead-Free Metal Halide Double Perovskites

2D layered double perovskites of (S-MPA) 4 AgBiI 8 (MPA-AgBiI 8 ) and (S-MPA) 4 CuBiI 8 (MPA-CuBiI 8 ) (S-MPA, S-β-methylphenethylammonium) were synthesized with a hydrothermal method. The crystal structure of MPA-AgBiI 8 was determined using single-crystal X-ray diffraction (scXRD). Powder XRD (pXRD) data suggest that the crystal structure of MPA-CuBiI 8 is more complex than that of MPA-AgBiI 8 . UV-Vis electronic absorption spectra of these perovskites reveal a bandgap of 2.03 eV for both. Short exciton lifetime from time-resolved photoluminescence (TRPL) results and low PL intensity of the Cu-based perovskite suggest a high density of trap states within the bandgap. Low frequency Raman spectra of both materials show distinct peaks and a slightly higher frequency for the Cu-based perovskite than the Ag-based perovskite. Density functional theory (DFT) calculations were conducted to simulate the low frequency Raman spectra and help explain the different phonon modes, which are collective vibrations of metal halide bond bending and stretching within the Ag- and Cu-centered octahedra coupled with MPA libration and twisting within the inorganic layer. The DFT theory also quantified octahedral distortions in the two perovskites. Furthermore, this combined experimental and computational study provides new insights into the low frequency vibrations of 2D perovskites.

Halogens↗
DOE OSTI2024

Identification of large polarons and exciton polarons in rutile and anatase polymorphs of titanium dioxide

Titanium dioxide (TiO 2 ) is a wide-gap semiconductor with numerous applications in photocatalysis, photovoltaics, and neuromorphic computing. The unique functional properties of this material critically depend on its ability to transport charge in the form of polarons, namely narrow electron wavepackets accompanied by local distortions of the crystal lattice. It is currently well established that the most important polymorphs of TiO 2 , the rutile and anatase phases, harbor small electron polarons and small hole polarons, respectively. However, whether additional polaronic species exist in TiO 2 , and under which conditions, remain open questions. Here, we provide definitive answers to these questions by exploring the rich landscape of polaron quasiparticles in TiO 2 via recently developed ab initio techniques. In addition to the already known small polarons, we identify three species, namely a large hole polaron in rutile, a large quasi-two-dimensional electron polaron in anatase, and a large exciton polaron in anatase. These findings complete the puzzle on the polaron physics of TiO 2 and pave the way for systematically probing and manipulating polarons in a broad class of complex oxides and quantum materials.

Dai, Zhenbang↗
DOE OSTI2025

Twists and turns: stacking and structure-dependent optical response in MoS 2 nanoscrolls

Transition metal dichalcogenide (TMD) nanoscrolls (NSs), specifically MoS 2 NSs, present unique structural and optical properties, exhibiting prominent photoluminescence (PL) signals despite their multilayer nature. Here, this study investigates the structural and spectroscopic characteristics of MoS 2 NSs, correlating them to show the effects of reduced interlayer interactions on excitons of MoS 2 NSs. The reduction in interlayer interaction arises from two main factors: (1) symmetry-broken mixed stacking due to misalignment between layers and (2) a highly inhomogeneous strain profile generated by the Archimedean spiral geometry with positive eccentricity. Transmission electron microscopy, field emission scanning electron microscopy, atomic force microscopy, Raman spectroscopy, and second harmonic generation measurements confirm these findings. Low-temperature PL spectroscopy explores the impact of reduced interlayer interactions on exciton properties such as exciton–phonon coupling and oscillator strength. This study provides crucial insights into the structure, stacking and unique optical properties of TMD NSs, advancing the understanding of interlayer interactions and their impacts in complex quasi-one-dimensional nanostructures.

25 ENERGY STORAGE↗
DOE OSTI2015

Crossover from quantum to classical transport

Understanding the crossover from quantum to classical transport phenomena has become of fundamental importance not only for technological applications due to the creation of sub-10nm transistors – an important building block of our modern life – but also for elucidating the role played by quantum mechanics in the evolutionary fitness of biological complexes. This article provides a basic introduction into the nature of charge and energy transport in the quantum and classical regimes. Here, it will identify the characteristic transport properties in both limits, and demonstrate how they can be connected through the loss of quantum mechanical coherence. I will identify the salient features of the crossover physics, and demonstrate their importance in opening new transport regimes and for understanding efficient and robust energy transport in biological complexes.

charge↗
DOE OSTI2024

Mid-infrared photodetection with 2D metal halide perovskites at ambient temperature

The detection of mid-infrared (MIR) light is technologically important for applications such as night vision, imaging, sensing, and thermal metrology. Traditional MIR photodetectors either require cryogenic cooling or have sophisticated device structures involving complex nanofabrication. Here, we conceive spectrally tunable MIR detection by using two-dimensional metal halide perovskites (2D-MHPs) as the critical building block. Leveraging the ultralow cross-plane thermal conductivity and strong temperature-dependent excitonic resonances of 2D-MHPs, we demonstrate ambient-temperature, all-optical detection of MIR light with sensitivity down to 1 nanowatt per square micrometer, using plastic substrates. Through the adoption of membrane-based structures and a photonic enhancement strategy unique to our all-optical detection modality, we further improved the sensitivity to sub–10 picowatt-per-square-micrometer levels. The detection covers the mid-wave infrared regime from 2 to 4.5 micrometers and extends to the long-wave infrared wavelength at 10.6 micrometers, with wavelength-independent sensitivity response. Our work opens a pathway to alternative types of solution-processable, long-wavelength thermal detectors for molecular sensing, environmental monitoring, and thermal imaging.

Li, Yanyan [Yale University, New Haven, CT (United↗
NASA NTRSDate not supplied

Ab initio ground states of strongly-correlated materials on quantum computers

The accurate first-principles description of strongly-correlated materials is an important and challenging problem in condensed matter physics. Ab initio downfolding has emerged as a way of deriving accurate many-body Hamiltonians including strong correlations, representing a subspace of interest of a material, using density functional theory calculations as a starting point. However, the solution of these material-specific models can scale exponentially on classical computers, constituting a challenge. Here we propose that utilizing quantum computers for obtaining the properties of downfolded Hamiltonians yields an accurate description of the ground state properties of strongly-correlated systems, while circumventing the exponential scaling problem. We benchmark the solution of Hubbard-like models obtained through downfolding by utilizing a classical tensor network implementation of variational quantum eigensolvers (VQE), and we reveal a strategy for driving the optimization through a hybrid minimization of the energy and maximization of the overlap with an approximate solution obtained through low-cost computational methods. This results in a reduction of the energy error by orders of magnitude compared to conventional VQE approaches, and allows us to reproduce long-range correlations for the first time. We demonstrate our first-principles approach for diverse strongly-correlated materials, correctly predicting the antiferromagnetic state of one-dimensional cuprate Ca 2 CuO 3 , the excitonic ground state of monolayer WTe2, and the charge-ordered state of correlated metal SrVO 3 . Our efficient computational implementation allows us to simulate large systems with up to 54 qubits and encompassing up to four correlated bands, which is indicative of the complexity that our framework can address.

Antonios M Alvertis↗
DOE OSTI2026

Biosynthesis of Minimal C-Phycocyanin Chromophore Assemblies in E. coli Provides a Platform to Dissect Protein-Mediated Tuning of Exciton Transfer

Cyanobacteria are arguably among the most evolutionarily successful organisms on Earth, inhabiting a wide range of ocean, freshwater, soil, and even desert environments on every continent. The cyanobacterial phycobilisome consists of stacks of disk-like light-collecting moieties, allophycocyanin (APC) and phycocyanin (CPC), with covalently bound phycocyanobilin (PCB) pigments. The ways in which the energies of the specific chromophores in these complexes are tuned by the protein to achieve its highly efficient and directional energy transfer are not fully understood, as complex combinations of decay pathways are occurring simultaneously and competitively through this elaborate light-harvesting system. This makes it difficult to extract information about isolated protein-pigment interactions. We provide herein a description of a useful new experimental platform in which we have recombinantly expressed a fully functioning CPC complex and selectively created minimal chromophore sets to study their individual contributions to the overall CPC spectra. Structural and computational analysis of this protein system have provided a greater understanding of how the protein environment serves to alter the photophysics of each of these chromophores. Introduction of a quencher into various positions within CPC confirmed the ability of the protein environment to tune the directionality of energy transport in this assembly. Further mutational analysis suggested the roles of key amino acids surrounding the chromophores, showcasing the utility of heterologous expression techniques for understanding the effects of structure on EET mechanisms in the phycobilisome.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Isolating the Vibrational Spectra of the Red Chlorophylls in Photosystem I with Multispectral Two-Dimensional Spectroscopy

Photosystem I (PSI) uses an antenna of chlorophyll (Chl) molecules to create a charge separated state with high quantum efficiency. Understanding the charge separation mechanism is currently hindered by spectral overlap between the antenna and reaction center (RC) Chls and the fact that energy transfer and electron transfer occur with similar time scales. Here, we characterize the antenna excited states by applying two-dimensional electronic (2DES) and two-dimensional electronic-vibrational (2DEV) spectroscopy to PSI complexes with closed RCs. Comparison of the 2DES and 2DEV spectra, which evolve with the same kinetics, enabled characterization of the vibrational modes of the antenna during energy equilibration between spectrally distinct Chls. Through global analysis, we learn how energy transfer between the Bulk and Red Chls presents in the 2DEV spectra and we definitively identify vibrations of the cationic components of the mixed exciton and intermolecular charge transfer states associated with the Red Chls. This work enables future studies of the initial charge separation mechanism of PSI by 2DEV spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interplay between Mixed and Pure Exciton States Controls Singlet Fission in Rubrene Single Crystals

Singlet fission (SF) is a multielectron process in which one singlet exciton S converts into a pair of separated triplet excitons T. SF is widely studied as it may help overcome the Shockley−Queisser efficiency limit for semiconductor photovoltaic cells. To elucidate and control the SF mechanism, great attention has been given to the identification of intermediate states in SF materials, which often appear elusive due to the complexity and fast time scales of the SF process. Here, we apply 14 fs-1 ms transient absorption techniques to high-purity rubrene single crystals to disentangle the intrinsic fission dynamics from the effects of defects and grain boundaries and to identify reliably the fission intermediates. Our data demonstrates that above-gap excitation directly generates a hybrid vibronically assisted mixture of singlet state and triplet-pair multiexciton [S/TT], which rapidly (<100 fs) and coherently branches into pure singlet or triplet excitations. The relaxation of [S/TT] to S is followed by a relatively slow and temperature-activated (48 meV activation energy) incoherent fission process. The SF competing pathways and intermediates revealed here unify the observations and models presented in previous studies of SF in rubrene and offer alternative strategies for the development of SF-enhanced photovoltaic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Carbon-nitrogen complex as an alternative to the 𝑇 center in Si

A first-principles study of a carbon-nitrogen (CN) impurity complex in silicon is presented as an isoelectronic alternative to the T center [(CCH) Si ]. The latter has been pursued for applications in quantum information science, yet its sensitivity to the presence of hydrogen is still problematic. Our proposed complex has no hydrogen, thereby eliminating this issue. First, we show that the CN complex is stable against decomposition into substitutional and interstitial defects. Next, we show that due to being isoelectronic to the T center, the CN complex has a similar electronic structure, and therefore could be used in similar applications. We assess several low-energy configurations of the CN complex, finding (CN) Si to be stable and have the largest Debye-Waller factor. We predict a zero-phonon line (ZPL) of 828 meV (in the telecom S-band) and a radiative lifetime of 4.2 μs, comparable to the T center. Due to the presence of a bound exciton, choice of the exchange-correlation functional and also supercell-size scaling of the ZPL and transition dipole moment require special scrutiny; we rigorously justify our extrapolation schemes that allow computing values in the dilute limit.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Exploring the Structural Origins of Optically Efficient One-Dimensional Lead Halide Perovskite Nanostructures

Metal halide perovskites have excellent optoelectronic properties. This study aims to determine how the optoelectronic properties of a model perovskite, cesium lead bromide (CsPbBr3), change with length and thickness in one dimension (1D). By examining the photophysics of CsPbBr3 quantum dots (QDs), nanowires (NWs), and nanorods (NRs), we observe the influence of confinement, exciton diffusion, and trapping on their optical properties. Our findings reveal that exciton diffusion to trap states limits the photoluminescence quantum yield (PLQY) of 1D CsPbBr3 in the weakly confined regime (8-14 nm) and explains their long-lived exciton dynamics, while enhanced radiative rates contribute to achieving near-unity PLQY in the strongly confined regime (<7 nm). Consequently, blue-emitting, 2.4 nm-thick CsPbBr3 NRs were 3.6X more emissive than the conventional CsPbBr3 QDs. This study underscores how structural optimization can improve the optoelectronic performance of CsPbBr3 and provides insight into the complex interplay of radiative and nonradiative processes in 1D ionic semiconductors.

Oddo, Alexander M↗
DOE OSTI2025

Compressing Hamiltonians with ab initio downfolding for simulating strongly-correlated materials on quantum computers

The accurate first-principles description of strongly correlated materials is an important and challenging problem in condensed matter physics. Ab initio downfolding has emerged as a way of deriving compressed many-body Hamiltonians that maintain the essential physics of strongly correlated materials. The solution of these material-specific models is still exponentially difficult to generate on classical computers, but quantum algorithms allow for a significant speed-up in obtaining the ground states of these compressed Hamiltonians. Here, we demonstrate that using quantum algorithms to obtain the properties of downfolded Hamiltonians can indeed yield high-fidelity solutions. By combining ab initio downfolding and variational quantum eigensolvers, we correctly predict the antiferromagnetic state of one-dimensional cuprate Ca 2 Cu O 3 , the excitonic ground state of monolayer W Te 2 , and the charge-ordered state of correlated metal Sr VO 3 . Numerical simulations using a classical tensor network implementation of variational quantum eigensolvers allow us to simulate large models with up to 54 qubits and encompassing up to four bands in the correlated subspace, which is indicative of the complexity that our framework can address. Through these methods we demonstrate the potential of classical preoptimization and downfolding techniques for enabling efficient materials simulation using quantum algorithms.

Alvertis, Antonios M. [NASA, Ames; LBNL, Berkeley]↗
DOE OSTI2025

Toward improved property prediction of 2D materials using many-body quantum Monte Carlo methods

The field of 2D materials has grown dramatically in the past two decades. 2D materials can be utilized for a variety of next-generation optoelectronic, spintronic, clean energy, and quantum computing applications. These 2D structures, which are often exfoliated from layered van der Waals materials, possess highly inhomogeneous electron densities and can possess short- and long-range electron correlations. The complexities of 2D materials make them challenging to study with standard mean-field electronic structure methods such as density functional theory (DFT), which relies on approximations for the unknown exchange-correlation functional. To overcome the limitations of DFT, highly accurate many-body electronic structure approaches such as diffusion Monte Carlo (DMC) can be utilized. In the past decade, DMC has been used to calculate accurate magnetic, electronic, excitonic, and topological properties in addition to accurately capturing interlayer interactions and cohesion and adsorption energetics of 2D materials. Here, this approach has been applied to 2D systems of wide interest, including graphene, phosphorene, MoS 2 , CrI 3 , VSe 2 , GaSe, GeSe, borophene, and several others. In this review article, we highlight some successful recent applications of DMC to 2D systems for improved property predictions beyond standard DFT.

2D materials↗
DOE OSTI2025

Enhanced spectral purity of WSe 2 quantum emitters via conformal organic adlayers

Quantum emitters in solid-state materials are typically embedded in the bulk of their hosts, making their electronic transitions inaccessible to surface modification. In contrast, two-dimensional materials, with their all-surface nature, offer a platform for tuning quantum emitters via chemical functionalization. Because of its semiconducting properties that enable electrical addressability, monolayer WSe 2 is a promising candidate for quantum emission, although the complex interplay between point defects and the localized strain needed to activate quantum emission leads to poor spectral purity. Here, we demonstrate that functionalizing monolayer WSe 2 with conformal adlayers of 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) improves quantum emission spectral purity. Optical spectroscopy reveals that PTCDA functionalization lowers defect activation energies by 10 meV and induces a 30 nm redshift in quantum emission wavelength, while preserving the bright and dark exciton energies of monolayer WSe 2 . First-principles calculations corroborate these findings, thus providing molecular-level insight into the underlying mechanism of enhanced spectral purity.

Ananth, Riddhi [Northwestern Univ., Evanston, IL (↗
DOE OSTI2026

Radiative Defects in Chloride-Activated CdSe Thin Films

Defect recombination limits wide-gap Se-based chalcogenide devices, yet how chloride activation reshapes radiative pathways remains unclear. Here we show that a 40 min CdCl 2 anneal converts evaporated CdSe from porous nanograins into dense micrometer-scale polycrystals and sharpens the optical band edge, reducing the Urbach energy from 85 to 17 meV at 300 K. Combining temperature- and fluence-dependent photoluminescence (PL), time-resolved PL, hyperspectral mapping, and hybrid-DFT, we resolve three emissive channels and identify their mechanisms. The near-edge band is excitonic at low temperature and evolves into free-carrier emission at elevated temperature. A sub-gap band at E g −0.45 eV requires above-gap carriers and thermally quenches with a 0.16 eV activation energy. A broad ∼1.05 eV infrared band is excited by above- and below-gap photons and retains microsecond lifetimes at room temperature; patial mapping links it to edge-rich microstructure. Calculations suggest selenium-vacancy and cadmium-vacancy−chlorine complexes, pointing to routes to suppress defect-related losses in wide-gap chalcogenide devices.

Abudulimu, Abasi [Univ. of Toledo, OH (United Stat↗