Search NASA⌕ Search

SEARCH · Search NASA

Results for “exotic materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

P-ACTIVE Project Report

The Phase change material-based actively-tunable filter (P-ACTIVE, Dr. Hyun Jung Kim, the Principal Investigator / PI) project is a NASA Langley Research Center (LaRC)-led research endeavor that began as a NASA CIF (Center Innovation Fund) project in 2019. The goal of P-ACTIVE is to develop all-solid-state tunable optical filters that can serve as low-Size, Weight, and Power (SWaP) replacements to the ubiquitous filter wheel technology current in use, and serve as a starting point for completely new optical component technologies. By using materials commonly used in electronic memory devices, namely chalcogenide phase-change materials (PCMs), in conjunction with nanostructured surfaces with exotic, tailored optical responses (“metasurfaces”), the P-ACTIVE filters are able to tune their optical transmission/reflection behavior in real-time. Because of this new functionality, P-ACTIVE filters are highlighted for NASA science and space programs such as next generation Lidar, landing system (SLS) thermal monitoring, thermal imaging, imaging spectroscopy, and disaster monitoring (e.g., volcanic eruption observations from SmallSats). This document intends to serve as a compendium of the P-ACTIVE project. We begin by describing the project from background science and assume no prior knowledge of the subject. We then address experimental and theoretical results of P-ACTIVE device performance, as well as recent results obtained from the MISSE-14 mission related to space qualification of P-ACTIVE devices and constituent materials. We conclude with a prospective view of the P-ACTIVE technology, and discuss the potential for these filters and other similar metasurface devices to serve NASA’s mission.

metamaterial↗
NASA NTRS1989

Sand dune materials and polar layered deposits on Mars

The possible place of sand in the Martian polar layered deposits is examined. The erosional features in layered deposits and the morphologic relationship of dunes and the layered deposits are discussed. The colors of the polar dunes are shown to be similar to the colors of dunes at other latitudes, suggesting that the polar dunes can be explained without any special or exotic mechanism. Consideration is given to mixing and segregation of materials by eolian processes observed on Mars, showing that sand was probably carried to the polar regions during part of the formation of the layered deposits.

Thomas, Peter↗
NASA NTRS1990

Carbon in primitive meteorites

No meteorites are truly primitive, in the sense of being pristine collections of interstellar grains or solar-nebular condensates. Nonetheless, some chrondritic meteorites have been so little altered by secondary processing that they are commonly termed primitive and it is almost a definition of such chondrites that they contain significant quantities of carbon. Most of that carbon is of apparently local, i.e., solar-system, origin but a proportion that ranges from trace, in some cases, to minor, in others, is believed to be exotic, i.e., of circumstellar or interstellar origin, and it is upon such material that researchers focus here. The nature of the meteoritic samples and the techniques used to analyse them are briefly discussed and the observational record is surveyed. Clearly, the study of exotic carbon preserved in meteorites has been informative about sites of nucleosynthesis, processes of nucleation and growth of grains in stellar outflows, grain survival in the interstellar medium, and many other topics of astrophysical significance. Much more work, particularly of an interdisciplinary nature remains to be done, however.

Kerridge, John F.↗
NASA NTRS1988

Design of a lunar transportation system

The establishment of lunar bases is the next logical step in the exploration of space. Permanent lunar bases will support scientific investigation, the industrialization of space, and the development of self-sufficiency on the Moon. Scientific investigation and research and development would lead to applications utilizing lunar material resources. By utilizing these resources, the industrialization of space can become a reality. The above two factors coupled with the development of key and enabling technologies would lead to achievement of self-sufficiency of the lunar base. Attention was focused on specific design(s) to be pursued during subsequent stages in advanced courses. Some of the objectives in the project included: (1) minimizing the transportation of construction material and fuel from earth, or maximizing the use of the lunar material; (2) use of novel materials and light weight structures; (3) use of new manufacturing methods and technology such as magnetically levitated, or superconducting materials; and (4) innovative concepts of effectively utilizing the exotic lunar conditions, i.e. high thermal gradients, lack of atmosphere, zero wind forces, and lower gravity, etc.

Source record↗
NASA NTRS1989

Design of a lunar transportation system

The development of a good transportation infrastructure is a major requirement for the establishment of a permanent lunar base. Transportation is characterized by the technology available in a specific time frame and the need to transport personnel and cargo between Earth and Moon, and between lunar bases. In our study, attention was first focused on developing a transportation system for the first generation lunar base. As a first step, a tracked-type multipurpose lunar transportation vehicle was considered as a possible mode of transportation and a detailed study was conducted on the various aspects of the vehicle. Since the vehicle is composed of many moving parts, exposing it to the environment of the Moon, where fine dust particles are prevalent, can cause problems associated with lubrication and friction. The vehicle also posed problems concerning weight and power. Hence, several modifications were made to the above design ideas conceptually, and a Lunar Articulated Remote Transportation System (Lunar ARTS) is proposed as a more effective alternative with the following objectives: (1) minimizing the transportation of construction material and fuel from Earth or maximizing the use of the lunar material; (2) use of novel materials and light-weight structures; (3) use of new manufacturing methods and technology such as magnetic levitation using superconducting materials; and (4) innovative concepts of effectively utilizing the exotic lunar conditions, i.e., high thermal gradients, lack of atmosphere, lower gravity, etc. To achieve the above objectives of designing transportation systems from concept to operation, the project was planned in three phases: (1) conceptual design; (2) detailed analysis and synthesis; and (3) construction, testing, evaluation, and operation. In this project, both phases 1 and 2 have been carried out and work on phase 3 is in progress. In this paper, the details of the Lunar ARTS are discussed and the future work on the vehicle are also outlined.

Sankaravelu, A.↗
NASA NTRS1994

Near-Earth Asteroid Returned Sample (NEARS)

The concept of the Near-Earth Asteroid Returned Sample (NEARS) mission is to return to Earth 10-100 g from each of four to six sites on a near-Earth asteroid and to perform global characterization of the asteroid and measure mass, volume, and density to ten percent. The target asteroid for the mission is 4660 Nereus, probably a primitive C-type asteroid, with the alternate target being 1989ML, an extremely accessible asteroid of unknown type. Launch dates will be 1998, 2000, 2002, and 2004 on the Delta II-7925 launch vehicle. The mission objectives are three-fold. (1) Provide first direct and detailed petrological, chemical, age, and isotopic characterization of a near-Earth asteroid and relate it to terrestrial, lunar, and meteoritic materials. (2) Sample the asteroid regolith and characterize any exotic fragments. (3) Identify heterogeneity in the asteroid's isotopic properties, age, and elemental chemistry.

Shoemaker, Eugene M.↗
NASA NTRS2022

GRO 95577 (CR1) as a mineralogical analogue for asteroid (101955) Bennu

Orbital spectra of asteroid (101955) Bennu collected by NASA's Origins, Spectral Interpretation, Resource Identification, Security–Regolith Explorer (OSIRIS–REx) spacecraft have identified ungrouped C, CI, and CM meteorites having petrologic types 1, 1/2, and 2 as the best mineralogical analogues to Bennu to date. Here we present spectral evidence that Grosvenor Mountains (GRO) 95577, a CR1, is a better analogue for Bennu's bulk surface mineralogy. CR-like parent bodies are targets of interest because they contain some of the most pristine materials from the solar nebula and can contain substantial amounts of H2O and OH− in addition to exotic organics. Unfortunately, terrestrial weathering makes constraining their indigenous mineralogy and organics challenging. Analysis of samples retrieved directly from an asteroid would help us disentangle the effects of terrestrial weathering and asteroidal aqueous alteration and hence whether some of the exotic organics and large populations of presolar grains were affected by terrestrial processes in meteorites. If Bennu is comprised of CR1(−like) material, in whole or in part, the OSIRIS–REx returned sample represents a tremendous opportunity to explore in depth what is currently a unique material among carbonaceous chondrites.

Asteroids↗
NASA NTRS2017

Interstellar and Solar Nebula Materials in Cometary Dust

Laboratory studies of cometary dust collected in the stratosphere and returned from comet 81P/Wild 2 by the Stardust spacecraft have revealed ancient interstellar grains and molecular cloud organic matter that record a range of astrophysical processes and the first steps of planetary formation. Presolar materials are rarer meteorites owing to high temperature processing in the solar nebula and hydrothermal alteration on their asteroidal parent bodies. The greater preservation of presolar materials in comets is attributed to their low accretion temperatures and limited planetary processing. Yet, comets also contain a large complement of high temperature materials from the inner Solar System. Owing to the limited and biased sampling of comets to date, the proportions of interstellar and Solar System materials within them remains highly uncertain. Interstellar materials are identified by coordinated isotopic, mineralogical, and chemical measurements at the scale of individual grains. Chondritic porous interplanetary dust particles (CP IDPs) that likely derive from comets are made up of 0.1 - 10 micron-sized silicates, Fe-Ni-sulfides, oxides, and other phases bound by organic material. As much as 1% of the silicates are interstellar grains that have exotic isotopic compositions imparted by nucleosynthetic processes in their parent stars. Crystalline silicates in CP IDPs dominantly have normal isotopic compositions and probably formed in the Solar System. 81P samples include isotopically normal refractory minerals that resemble Ca-Al rich inclusions and chondrules common in meteorites. The origins of sub-micron amorphous silicates in IDPs are not certain, but at least a few % of them are interstellar grains. The remainder have isotopic compositions consistent with Solar System origins and elemental compositions that are inconsistent with interstellar grain properties, thus favoring formation in the solar nebula [4]. The organic component in comets and primitive meteorites has large enrichments in D/H and N-15/N-14 relative to terrestrial materials. These isotopic signatures are probably due to low temperature chemical processes in cold molecular clouds or the outermost reaches of the protoplanetary disk. The greatest isotopic anomalies are found in sub-micron organic nanoglobules that show chemical signatures of interstellar chemistry. The observation that cometary dust is mostly composed of isotopically normal minerals within isotopically anomalous organic matter is difficult to reconcile with the formation models of each component. The mineral component likely formed in high temperature processes in the inner Solar System, while the organic fraction shows isotopic and chemical signatures of formation near 10 K. Studying more primitive remnants of the Solar System starting materials would help in resolving this paradox. Comets formed across a vast expanse of the outer disk under differing thermal and collisional regimes, and some are likely to be better preserved than others. Finding truly pristine aggregates of presolar materials may require return of a pristine sample of comet nucleus material.

Messenger, Scott↗
NASA NTRS1987

A potpourri of regolith breccias - 'New' samples from the Apollo 14, 16, and 17 landing sites

Compositional (by INAA) and petrographic studies were performed among the smaller rocks (not analyzed previously) from the Apollo 14, 16, and 17 sites as part of a search for regolith samples exotic to the small traverse areas associated with these missions. Of the 40 samples studied, 31 were regolith breccias. Among these, three of the Apollo 14 samples proved to be compositionally unique, particularly the 14315 sample, which is radically different from all other Apollo 14 regolith materials (lower Mg and Fe, far higher Al and far lower REE abundances), and is probably exotic to the Apollo 14 traverse area. Among 10 samples from Apollo 17, all but one proved to be typical Apollo 17 regolith breccia. However, the 72504,10 sample is more than 99 percent pure pyroclastic glass, compositionally identical to the Apollo 17 orange glass obtained at a location 4 km away, attesting to the widespread distribution of orange glass deposits.

Jerde, Eric A.↗
NASA NTRS2018

Can Silicon-Smelting Contribute to the Low O/Si Ratio on the Surface of Mercury?

The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft collected data that provided important insights into the structure, chemical makeup, and compositional diversity of Mercury. Among the many discoveries about Mercury made by MESSENGER, several surprising compositional characteristics of the surface were observed. These discoveries include elevated sulfur abundances (up to 4 wt.%), elevated abundances of graphitic carbon (0-4.1 wt.% across the surface with an additional 1-3 wt.% graphite above the global average in low reflectance materials), low iron abundances (less than 2 wt.%), and low oxygen abundances (O/Si weight ratio of 1.20+/-0.1). These exotic characteristics likely have important implications for the thermochemical evolution of Mercury and point to a planet that formed under highly reducing conditions. In the present study, we focus specifically on the low O/Si ratio of Mercury, which is anomalous compared to all other planetary materials. A recent study that considered the geochemical implications of the low O/Si ratio reported that 12-20% of the surface materials on Mercury are composed of Si-rich, Si-Fe alloys. They further postulated that the origin of the metal is best explained by a combination of space weathering and graphite-induced smelting that was facilitated by interaction of graphite with boninitic and komatiitic parental liquids. The goal of the present study is to assess the plausibility of smelting on Mercury through experiments run at the conditions that McCubbin et al. indicated would be favorable for Si-smelting.

McCubbin, F. M.↗
NASA NTRS1975

Development of the mare regolith - Some model considerations

This investigation uses results obtained in an earlier Monte Carlo study by Oberbeck et al. (1973) to shed light on the consequences of mare-regolith origin by impact comminution of primarily local basaltic rocks by evaluating regolith growth and mixing as a function of time. The study demonstrates that regolith growth is self-regulated and has the same trend and nearly the same terminal growth rates whatever the history of bombardment: rapid initial accumulation followed by diminishing rates of growth. Mixing and all other processes investigated are growth regulated. Mixing increases as growth slows, but never to the extent that the regolith is homogenized. Because the average regolith is never homogenized, products of growth-regulated processes are preserved in the stratigraphy. This model indicates that deeper levels contain thinner depositional units, lesser quantities of meteoritic and exotic components, and more debris derived from shallow levels in the mare basalts than material in near-surface layers.

Quaide, W.↗
NASA NTRS1987

On the presolar origin of the 'normal planetary' noble gas component in meteorites

Several components of planetary noble gases, including CCFXe (Xe-X), s-process Kr and Xe, and Ne-E, are now thought to have had a presolar origin. It is proposed that the 'normal planetary' noble gas component, which contains most of the planetary Ar, Kr, and Xe, is also presolar. This component was trapped in carbonaceous mantles as the mantles formed on grain surfaces in the molecular cloud. The presolar dust grains and their carbonaceous mantles were then incorporated into primitive meteorites. This model naturally explains: (1) the affinity of 'normal planetary' noble gases for carbonaceous material in primitive chondrites; (2) the near absence of He and Ne in the 'normal planetary' component; (3) the elemental fractionation patterns of the 'exotic' and 'normal planetary' components; (4) the similarity of the isotopic compositions of 'normal planetary' and trapped solar Ar, Kr, and Xe; (5) the high noble gas content of the 'normal planetary' gas carrier; (6) several aspects of the chemistry of the 'normal planetary' gas carrier; (7) the correlation of planetary noble gases with the fine-grained material in primitive chondrites; and (8) the widespread occurrence of the planetary fractionation pattern throughout the solar system.

Huss, Gary R.↗
NASA NTRS1975

Grown organic matter as a fuel raw material resource

An extensive search was made on biomass production from the standpoint of climatic zones, water, nutrients, costs and energy requirements for many species. No exotic species were uncovered that gave hope for a bonanza of biomass production under culture, location, and management markedly different from those of existing agricultural concepts. A simulation analysis of biomass production was carried out for six species using conventional production methods, including their production costs and energy requirements. These estimates were compared with data on food, fiber, and feed production. The alternative possibility of using residues from food, feed, or lumber was evaluated. It was concluded that great doubt must be cast on the feasibility of producing grown organic matter for fuel, in competition with food, feed, or fiber. The feasibility of collecting residues may be nearer, but the competition for the residues for return to the soil or cellulosic production is formidable.

Roller, W. L.↗
NASA NTRS2002

Evidence of Spin and Energy Extraction in a Galactic Black Hole Candidate: The XMM-NEWTON/EPIC SPECTRUM of XTE 11650-500

We observed the Galactic black hole candidate XTE J1650-500 early in its fall of 2001 outburst with the XMM-Newton European Photon Imaging pn Camera (EPIC-pn). The observed spectrum is consistent with the source having been in the very high state. We h d a broad, skewed Fe Kar emission line that suggests the primary in this system may be a Kerr black hole and that indicates a steep disk emissivity profile that is hard to explain in terms of a standard accretion disk model. These results are quantitatively and qualitatively similar to those from an XMM-Newton observation of the Seyfert galaxy MCG -6-30-15. The steep emissivity in MCG -6-30-15 may be explained by the extraction and dissipation of rotational energy from a black hole with nearly maximal angular momentum or from material in the plunging region via magnetic connections to the inner accretion disk. If this process is at work in both sources, an exotic but fundamental general relativistic prediction may be confirmed across a factor of l0(exp 6) in black hole mass. We discuss these results in terms of the accretion flow geometry in stellar-mass black holes and the variety of enigmatic phenomena often observed in the very high state.

Miller, J. M.↗
NASA NTRS2006

Electrically Conductive Anodized Aluminum Surfaces

Anodized aluminum components can be treated to make them sufficiently electrically conductive to suppress discharges of static electricity. The treatment was conceived as a means of preventing static electric discharges on exterior satin-anodized aluminum (SAA) surfaces of spacecraft without adversely affecting the thermal-control/optical properties of the SAA and without need to apply electrically conductive paints, which eventually peel off in the harsh environment of outer space. The treatment can also be used to impart electrical conductivity to anodized housings of computers, medical electronic instruments, telephoneexchange equipment, and other terrestrial electronic equipment vulnerable to electrostatic discharge. The electrical resistivity of a typical anodized aluminum surface layer lies between 10(exp 11) and 10(exp 13) Omega-cm. To suppress electrostatic discharge, it is necessary to reduce the electrical resistivity significantly - preferably to < or = 10(exp 9) Omega-cm. The present treatment does this. The treatment is a direct electrodeposition process in which the outer anodized surface becomes covered and the pores in the surface filled with a transparent, electrically conductive metal oxide nanocomposite. Filling the pores with the nanocomposite reduces the transverse electrical resistivity and, in the original intended outer-space application, the exterior covering portion of the nanocomposite would afford the requisite electrical contact with the outer-space plasma. The electrical resistivity of the nanocomposite can be tailored to a value between 10(exp 7) and 10(exp 12) Omega-cm. Unlike electrically conductive paint, the nanocomposite becomes an integral part of the anodized aluminum substrate, without need for adhesive bonding material and without risk of subsequent peeling. The electrodeposition process is compatible with commercial anodizing production lines. At present, the electronics industry uses expensive, exotic, electrostaticdischarge- suppressing finishes: examples include silver impregnated anodized, black electroless nickel, black chrome, and black copper. In comparison with these competing finishes, the present nanocomposite finishes are expected to cost 50 to 20 percent less and to last longer.

Nguyen, Trung Hung↗
NASA NTRS2017

Oriented Mineral Transformation in a Dark Inclusion from the Leoville Meteorite

Dark inclusions (DIs) in chondrites and achondrites are dark gray to black fragments that include a wide variety of materials that have experienced very different petrologic histories. Based on the law of inclusions, they are rocks that accreted prior to and are older than their host meteorites and possibly rep-resent an earlier generation of material. The origin of these inclusions and their relationship to their host meteorites is not always clear. They are interesting in that they represent lithologies that experienced different parent body histories than their host meteorites and are either exotic components or originated from different regions of the meteorite parent body. In many cases, DIs in CV chondrites have been altered to greater degrees than their host meteorites suggesting pre accretionary alteration [e.g., 1,2,3]. There is debate concerning whether or not these DIs record an earlier era of aqueous alteration and subsequent thermal metamorphism, and how these processes may have also affected the host CV materials. The present study is a description of a dark inclusion found in the Leoville meteorite (specifically, thin section USNM 3535-1). This inclusion has some interesting features that have considerable relevance for this discussion.

Buchanan, P. C.↗
NASA NTRS1973

Batteries for storage of wind-generated energy

Cost effectiveness characteristics of conventional-, metal gas-, and high energy alkali metal-batteries for wind generated energy storage are considered. A lead-acid battery with a power density of 20 to 30 watt/hours per pound is good for about 1500 charge-discharge cycles at a cost of about $80 per kilowatt hour. A zinc-chlorine battery that stores chlorine as solid chlorine hydrate at temperatures below 10 C eliminates the need to handle gaseous chlorine; its raw material cost are low and inexpensive carbon can be used for the chlorine electrode. This system has the best chance to replace lead-acid. Exotic alkali metal batteries are deemed too costly at the present stage of development.

Schwartz, H. J.↗
NASA NTRS1998

Hybrid Titanium Composite Laminates: A New Aerospace Material

In the realm of aerospace design and performance, there are few boundaries in the never-ending drive for increased performance. This thirst for ever-increased performance of aerospace equipment has driven the aerospace and defense industries into developing exotic, extremely high-performance composites that are pushing the envelope in terms of strength-to-weight ratios, durability, and several other key measurements. To meet this challenge of ever-increasing improvement, engineers and scientists at NASA-Langley Research Center (NASA-LaRC) have developed a high-temperature metal laminate based upon titanium, carbon fibers, and a thermoplastic resin. This composite, known as the Hybrid Titanium Composite Laminate, or HTCL, is the latest chapter in a significant, but relatively short, history of metal laminates.

Johnson, W. S.↗