Search NASA⌕ Search

SEARCH · Search NASA

Results for “fermentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Rapid monitoring of fermentations: a feasibility study on biological 2,3-butanediol production

2,3-butanediol (2,3-BDO) is an economically important platform chemical that can be produced by the fermentation of sugars using an engineered strain of Zymomonas mobilis . These fermentations require continuous monitoring and modification of fermentation conditions to maximize 2,3-BDO yields and minimize the production of the undesired coproducts glycerol and acetoin. Because of the time required for sampling and off-line chromatographic measurement of fermentation samples, the ability of fermentation scientists to modify fermentation conditions in a timely manner is limited. The goal of this study was to test if near-infrared spectroscopy (NIRS) along with multivariate statistics could reduce the time needed for this analysis and enable real-time monitoring and control of the fermentation. In this work we developed partial least squares (PLS) calibration models to predict the concentrations of glucose, xylose, 2,3-BDO, acetoin, and glycerol in fermentations via NIRS using two different spectrometers and two different spectroscopy modalities. We first evaluated the feasibility of rapid NIRS monitoring through experiments where we measured the signals from each analyte of interest and built NIRS-based PLS models using spectra from synthetic samples containing uncorrelated concentrations of these analytes. All analytes showed unique spectral signatures, and this initial modeling showed that all analytes could be detected simultaneously. We then began work with samples from laboratory fermentation experiments and tested the feasibility of regression model development across two spectral collection modalities (at-line and on-line) and two instruments: a laboratory-grade instrument and a low-cost instrument with a more limited spectral range. All modalities showed promise in the ability to monitor Z. mobilis fermentations of glucose and xylose to 2,3-BDO. The low-cost instrument displayed a lower signal-to-noise ratio than the laboratory-grade instrument, which led to comparatively lower performance overall, but still provided sufficient accuracy to monitor fermentation trends. While the ease of use of on-line monitoring systems was favored as compared to at-line systems due to the lack of sampling required and potential for automated process control, we observed some decrease in performance due to the additional complexity of the sample matrix. We have demonstrated that NIRS combined with multivariate analysis can be used for at-line and on-line monitoring of the concentrations of glucose, xylose, 2,3-BDO, acetoin, and glycerol during Z. mobilis fermentations. The decrease in signal-to-noise ratio when using a low-cost spectrometer led to greater prediction error than the laboratory-grade spectrometer for at-line monitoring. The on-line monitoring modality showed great promise for real time process control via NIRS.

09 BIOMASS FUELS↗

NIR Dataset and Models (Near-Infrared Spectroscopy Calibration Dataset for Butanediol Fermentation and Multivariate Calibration Models) [SWR-22-60]

2,3-butanediol (2,3-BDO) is an economically important platform chemical that can be used in a variety of chemical feedstocks, liquid fuels, and biosynthetic building blocks. While 2,3-BDO can be efficiently produced by fermentation, the fermentation requires continuous monitoring and control to maximize 2,3-BDO yields and minimize inhibitory coproducts. Because of the time required for sampling and at-line measurement of fermentation samples with high pressure liquid chromatography (HPLC), the ability for operators to perform real-time modification to fermentation conditions is limited. To overcome this challenge, researchers from the National Renewable Energy Laboratory (NREL) have developed a calibration model which can predict the concentration of several analytes in real-time using near-infrared (NIR) spectra of the filtered fermentation broth. While significantly reducing the need for off-line sampling, NREL expects this technology to play a critical role in maximizing 2,3-BDO production. 2,3-butanediol (2,3-BDO) is a useful chemical platform that can be used to create a variety of products. For instance, 2,3-BDO can be (1) dehydrated and converted into methyl ethyl ketone, a liquid fuel additive or (2) deoxydehydrated into 1,3-butadiene for synthetic rubber, which can also be oligomerized in high yields to gasoline, diesel, and jet fuel. In order to maximize 2,3-BDO production, frequent measurement of fermentation samples is needed, as small changes in oxygen concentration can drive the fermentation to undesired products. For example, oxygen-deficient conditions result in glycerol production, while excess oxygen concentrations result in acetoin production. This results in the need for measuring dissolved oxygen, glucose, and xylose concentrations in order to optimize the aeration rate of the fermentation. Traditional monitoring methods occurs off-line and can take up to 30 minutes per sample. With multiple fermenters and high-pressure liquid chromatography (HPLC) injectors, resulting in the need for multiple samples, the sampling process can take hours to complete. NREL’s calibration model can predict the glucose, xylose, 2,3-BDO, acetoin, and glycerol concentrations from NIR spectra of filtered fermentation liquor samples. Using a partial least-squares (PLS) calibration model, NREL’s model can monitor the concentration of these analytes during subsequent fermentations at bench- and pilot-scale, demonstrating the utility of NIR spectroscopy combined with chemometrics for real-time, at-line monitoring of 2,3-BDO fermentations.

Wolfrum, Edward↗

Physical Properties of Moist, Fermented Corn Kernels

A novel approach to producing corn stover biomass feedstock has been investigated. In this approach, corn grain and stover are co-harvested at moisture contents much less than typical corn silage. The grain and stover are conserved together by anaerobic storage and fermentation and then separated before end use. When separated from the stover, the moist, fermented grain had physical characteristics that differ from typical low-moisture, unfermented grain. A comprehensive study was conducted to quantify the physical properties of this moist, fermented grain. Six corn kernel treatments, either fermented or unfermented, having different moisture contents, were used. Moist, fermented kernels (26 and 36% w.b. moisture content) increased in size during storage. The fermented kernels’ widths and thicknesses were 10% and 15% greater, respectively, and their volume was 28% greater than the dry kernels (15% w.b.). Dry basis particle density was 9% less for moist, fermented kernels. Additionally, the dry basis bulk density was 29% less, and the dry basis hopper-discharged mass flow rate was 36% less. Moist, fermented grain had significantly greater kernel-to-kernel coefficients of friction and angles of repose compared to relatively dry grain. The friction coefficient on four different surfaces was also significantly greater for fermented kernels. Fermented corn kernels had lower individual kernel rupture strengths than unfermented kernels. These physical differences must be considered when designing material handling and processing systems for moist, fermented corn grain.

09 BIOMASS FUELS↗

Systems and methods for continuously fermenting C5 and C6 saccharides

This invention provides optimized fermentation of cellulosic and hemicellulosic sugars. Biomass-derived hemicellulosic and cellulosic sugars are independently conditioned and separately fermented, utilizing reuse and recycle of microorganisms, metabolic intermediates, and nutrients. Conditioned sugars can be fermented in separate vessels, where excess cells from glucose fermentation are conveyed to hemicellulose sugar fermentation along with raffinate from solvent recovery, to enhance productivity and product yield. Some variations provide a method of fermenting C5 and C6 sugars to fermentation products, the method comprising: fermenting a C6-rich sugar feed to a first fermentation product; fermenting a C5-rich sugar feed to a second fermentation product; removing microorganism cells from the first fermentor, to maintain a cell concentration within a selected range; conveying microorganism cells to a second fermentor; and removing microorganism cells from the second fermentor, to maintain a microorganism cell concentration that is greater than that in the C6-rich fermentor.

Survase, Shrikant↗

Fermentation metabolism and its evolution in algae

Fermentation or anoxic metabolism allows unicellular organisms to colonize environments that become anoxic. Free-living unicellular algae capable of a photoautotrophic lifestyle can also use a range of metabolic circuitry associated with different branches of fermentation metabolism. While algae that perform mixed-acid fermentation are widespread, the use of anaerobic respiration is more typical of eukaryotic heterotrophs. The occurrence of a core set of fermentation pathways among the algae provides insights into the evolutionary origins of these pathways, which were likely derived from a common ancestral eukaryote. Based on genomic, transcriptomic, and biochemical studies, anaerobic energy metabolism has been examined in more detail in Chlamydomonas reinhardtii (Chlamydomonas) than in any other photosynthetic protist. This green alga is metabolically flexible and can sustain energy generation and maintain cellular redox balance under a variety of different environmental conditions. Fermentation metabolism in Chlamydomonas appears to be highly controlled, and the flexible use of the different branches of fermentation metabolism has been demonstrated in studies of various metabolic mutants. Additionally, when Chlamydomonas ferments polysaccharides, it has the ability to eliminate part of the reductant (to sustain glycolysis) through the production of H 2 , a molecule that can be developed as a source of renewable energy.To date, little is known about the specific role(s) of the different branches of fermentation metabolism, how photosynthetic eukaryotes sense changes in environmental O 2 levels, and the mechanisms involved in controlling these responses, at both the transcriptional and post-transcriptional levels. In this review, we focus on fermentation metabolism in Chlamydomonas and other protists, with only a brief discussion of plant fermentation when relevant, since it is thoroughly discussed in other articles in this volume.

59 BASIC BIOLOGICAL SCIENCES↗

evaluation of the bioconversion of genetically modified switchgrass using simultaneous saccharification and fermentation ans a consolidated bioprocessing approach

Abstract Background: The inherent recalcitrance of lignocellulosic biomass is one of the major economic hurdles for the production of fuels and chemicals from biomass. Additionally, lignin is recognized as having a negative impact on enzymatic hydrolysis of biomass, and as a result much interest has been placed on modifying the lignin pathway to improve bioconversion of lignocellulosic feedstocks. Results: Previous results showed down-regulation of the caffeic acid 3-O-methyl transferase (COMT) gene in the lignin pathway yielded switchgrass (Panicum virgatum) that was more susceptible to bioconversion after dilute acid pretreatment. Here we examined the response of these plant lines to milder pretreatment conditions with yeast-based SSF, CBP with Clostridium thermocellum, and fermentations with the cellulolytic extreme thermophiles, Caldicellulosiruptor bescii and Caldicellulosiruptor obsidiansis. Unlike the S. cerevisiae SSF conversions, fermentations of pretreated down-regulated COMT transgenic switchgrass with C. thermocellum showed an apparent inhibition of fermentation not observed in the wild-type switchgrass. This inhibition can be eliminated by hot water extraction of the pretreated biomass which resulted in superior conversion yield with transgenic versus wild-type switchgrass for C. thermocellum, also exceeding the yeast-based SSF yield. Further fermentation evaluation of the transgenic switchgrass indicated differential inhibition for the Caldicellulosiruptor strains, which could not be rectified by additional processing conditions. Gas chromatography-mass spectrometry metabolite profiling was used to examine the fermentation broth to elucidate the relative abundance of lignin derived aromatic compounds. The types and abundance of fermentation-derived lignin constituents varied between C. thermocellum and each of the Caldicellulosiruptor strains. Conclusions: The down-regulation of the COMT gene improves the bioconversion of switchgrass relative to the wild-type regardless of the pretreatment condition or fermentation microorganism. However, bacterial fermentations demonstrated strain-dependent sensitivity to the COMT transgenic biomass, likely due to additional soluble lignin pathway-derived constituents resulting from the COMT gene disruption. Removal of these inhibitory constituents permitted completion of fermentation by C. thermocellum, but not by the Caldicellulosiruptor strains. The reason for this difference needs to be explored further.

Caldicellulosiruptor bescii↗

Scaleable production and separation of fermentation-derived acetic acid. Final CRADA report.

Half of U.S. acetic acid production is used in manufacturing vinyl acetate monomer (VAM) and is economical only in very large production plants. Nearly 80% of the VAM is produced by methanol carbonylation, which requires high temperatures and exotic construction materials and is energy intensive. Fermentation-derived acetic acid production allows for small-scale production at low temperatures, significantly reducing the energy requirement of the process. The goal of the project is to develop a scaleable production and separation process for fermentation-derived acetic acid. Synthesis gas (syngas) will be fermented to acetic acid, and the fermentation broth will be continuously neutralized with ammonia. The acetic acid product will be recovered from the ammonium acid broth using vapor-based membrane separation technology. The process is summarized in Figure 1. The two technical challenges to success are selecting and developing (1) microbial strains that efficiently ferment syngas to acetic acid in high salt environments and (2) membranes that efficiently separate ammonia from the acetic acid/water mixture and are stable at high enough temperature to facilitate high thermal cracking of the ammonium acetate salt. Fermentation - Microbial strains were procured from a variety of public culture collections (Table 1). Strains were incubated and grown in the presence of the ammonium acetate product and the fastest growing cultures were selected and incubated at higher product concentrations. An example of the performance of a selected culture is shown in Figure 2. Separations - Several membranes were considered. Testing was performed on a new product line produced by Sulzer Chemtech (Germany). These are tubular ceramic membranes with weak acid functionality (see Figure 3). The following results were observed: (1) The membranes were relatively fragile in a laboratory setting; (2) Thermally stable {at} 130 C in hot organic acids; (3) Acetic acid rejection > 99%; and (4) Moderate ammonia flux. The advantages of producing acetic acid by fermentation include its appropriateness for small-scale production, lower cost feedstocks, low energy membrane-based purification, and lower temperature and pressure requirements. Potential energy savings of using fermentation are estimated to be approximately 14 trillion Btu by 2020 from a reduction in natural gas use. Decreased transportation needs with regional plants will eliminate approximately 200 million gallons of diesel consumption, for combined savings of 45 trillion Btu. If the fermentation process captures new acetic acid production, savings could include an additional 5 trillion Btu from production and 7 trillion Btu from transportation energy.

03 NATURAL GAS↗

A unifying equation for fermentation sustainability across the titer-rate-yield landscape

Industrial fermentation is central to the sustainable production of fuels and chemicals, yet commercial viability of emerging technologies hinges on improving fermentation titer, rate, and yield (TRY). How these metrics shape system cost remains difficult to generalize due to complex interactions among feedstocks, fermentation, separations, catalytic upgrading, waste management, and facility design. Here, we systematically map theoretical fermentation performance spaces (formed by all potential TRY combinations) for 32 representative biomanufacturing facilities—spanning distinct choices for feedstocks, fermentation regimes and products, separations, and catalytic upgrading—by simulating and evaluating them (via techno-economic analysis, TEA) under uncertainty (600,000 Monte Carlo simulations) and across TRY combinations (7500 TRY combinations for each of 32 configurations). Across this wide design and thermodynamic simulation space, we find the relationship between fermentation TRY and system cost is captured by a simple, generalizable mathematical equation (R 2 of 0.992 − 1.000 across our simulations; 0.954 − 1.000 when validated against prior studies that used different tools). We use this equation to elucidate key drivers that shape cost sensitivity to fermentation performance, generating widely applicable insights. By demonstrating a unifying relationship governs the impact of fermentation on biomanufacturing economics, this work establishes a foundation for agile, holistically predictive, resource-efficient strategies to prioritize fermentation research and development needs and accelerate commercialization of emerging biomanufacturing technologies.

applied mathematics↗

Rheological properties of corn stover slurries during fermentation by Clostridium thermocellum

Background: Milling during fermentation, termed cotreatment, has recently been proposed as an alternative to thermochemical pretreatment as a means to increase the accessibility of lignocellulosic biomass to biological attack. A central premise of this approach is that partial solubilization of biomass changes the slurry’s physical properties such that milling becomes more impactful and more feasible. A key uncertainty is the energy required to mill partially fermented biomass. To inform both of these issues, we report rheological characterization of small-particle, corn stover slurries undergoing fermentation by Clostridium thermocellum . Results: Fermented and unfermented corn stover slurries were found to be shear-thinning and well described by a power law model with an exponent of 0.10. Plastic viscosity of a slurry, initially at 16 wt.% insoluble solids, decreased as a result of fermentation by a factor of 2000, with the frst eightfold reduction occurring in the frst 10% of carbohydrate conversion. Large amplitude oscillatory shear experiments revealed only minor changes to the slurry’s rheological fngerprint as a result of fermentation, with the notable change being a reduction in the critical strain amplitude needed for the onset of nonlinearity. All slurries were found to be elastoviscoplastic, with the elastic/viscous crossover at roughly 100% strain amplitude. Conclusions: Whereas prior biomass rheology studies have involved pretreated feedstocks and solubilization mediated by fungal cellulase, we report results for feedstocks with no pretreatment other than autoclaving and for solubilization mediated by C. thermocellum . As observed in prior studies, C. thermocellum fermentation results in a dramatic decrease in viscosity. The magnitude of this decrease, however, is much larger starting with unpretreated feedstock than previously reported for pretreated feedstocks. LAOS measurements provide a detailed picture of the rheological fngerprint of the material. Viscosity measurements confrm the hypothesis that the physical character of corn stover slurries changes dramatically during fermentation by C. thermocellum , and indicate that the energy expended on overcoming slurry viscosity will be far less for partially fermented corn stover than for unfermented corn stover.

09 BIOMASS FUELS↗

Declining carbohydrate solubilization with increasing solids loading during fermentation of cellulosic feedstocks by Clostridium thermocellum: documentation and diagnostic tests

Abstract Background For economically viable 2nd generation biofuels, processing of high solid lignocellulosic substrate concentrations is a necessity. The cellulolytic thermophilic anaerobe Clostridium thermocellum is one of the most effective biocatalysts for solubilization of carbohydrate harbored in lignocellulose. This study aims to document the solubilization performance of Clostridium thermocellum at increasing solids concentrations for two lignocellulosic feedstocks, corn stover and switchgrass, and explore potential effectors of solubilization performance. Results Monocultures of Clostridium thermocellum demonstrated high levels of carbohydrate solubilization for both unpretreated corn stover and switchgrass. However, fractional carbohydrate solubilization decreases with increasing solid loadings. Fermentation of model insoluble substrate (cellulose) in the presence of high solids lignocellulosic spent broth is temporarily affected but not model soluble substrate (cellobiose) fermentations. Mid-fermentation addition of cells ( C. thermocellum ) or model substrates did not significantly enhance overall corn stover solubilization loaded at 80 g/L, however cultures utilized the model substrates in the presence of high concentrations of corn stover. An increase in corn stover solubilization was observed when water was added, effectively diluting the solids concentration mid-fermentation. Introduction of a hemicellulose-utilizing coculture partner, Thermoanaerobacterium thermosaccharolyticum, increased the fractional carbohydrate solubilization at both high and low solid loadings. Residual solubilized carbohydrates diminished significantly in the presence of T. thermosaccharolyticum compared to monocultures of C. thermocellum, yet a small fraction of solubilized oligosaccharides of both C 5 and C 6 sugars remained unutilized. Conclusion Diminishing fractional carbohydrate solubilization with increasing substrate loading was observed for C. thermocellum -mediated solubilization and fermentation of unpretreated lignocellulose feedstocks. Results of experiments involving spent broth addition do not support a major role for inhibitors present in the liquid phase. Mid-fermentation addition experiments confirm that C. thermocellum and its enzymes remain capable of converting model substrates during the middle of high solids lignocellulose fermentation. An increase in fractional carbohydrate solubilization was made possible by (1) mid-fermentation solid loading dilutions and (2) coculturing C. thermocellum with T. thermosaccharolyticum , which ferments solubilized hemicellulose. Incomplete utilization of solubilized carbohydrates suggests that a small fraction of the carbohydrates is unaffected by the extracellular carbohydrate-active enzymes present in the culture.

09 BIOMASS FUELS↗

Techno-Economic Case Study: Fermentation Cost Impacts from Selected Critical Material Attributes

This report summarizes analysis conducted to support a case study under the Feedstock-Conversion Interface Consortium (FCIC) focused on techno-economic analysis (TEA) modeling to quantify the economic implications of biomass hydrolysate substrate variability on fermentation performance and resultant biorefinery fuel yields. It is known that fermentation inhibitors or byproducts, as may either come from constituents in the biomass feedstock or imparted through biorefinery processing operations, can detrimentally impact fermentation rates and yields. However, it is often difficult to isolate fermentation impacts to individual components given the complex nature of biomass varying simultaneously in multiple attributes from one lot to another. For this study, we worked with FCIC researchers to obtain data on key fermentation performance metrics, namely productivity rates and conversion yields, across a number of material attribute species previously selected by the researchers as "critical" attributes which may be found in hydrolysate used as microbial carbon sources during fermentation. These data were run through TEA models to estimate resultant impacts on biorefinery economics, reported as minimum fuel selling price (MFSP). Overall, the trends in MFSP closely followed fuel yields, in turn tied to fermentation process yields and selectivity, with minimal economic impact from variations in fermentation productivity.

09 BIOMASS FUELS↗

Leveraging transcription factors to speed cellobiose fermentation by Saccharomyces cerevisiae

Saccharomyces cerevisiae, a key organism used for the manufacture of renewable fuels and chemicals, has been engineered to utilize non-native sugars derived from plant cell walls, such as cellobiose and xylose. However, the rates and efficiencies of these non-native sugar fermentations pale in comparison with those of glucose. Systems biology methods, used to understand biological networks, hold promise for rational microbial strain development in metabolic engineering. Here, we present a systematic strategy for optimizing non-native sugar fermentation by recombinant S. cerevisiae, using cellobiose as a model. Differences in gene expression between cellobiose and glucose metabolism revealed by RNA deep sequencing indicated that cellobiose metabolism induces mitochondrial activation and reduces amino acid biosynthesis under fermentation conditions. Furthermore, glucose-sensing and signaling pathways and their target genes, including the cAMP-dependent protein kinase A pathway controlling the majority of glucose-induced changes, the Snf3-Rgt2-Rgt1 pathway regulating hexose transport, and the Snf1-Mig1 glucose repression pathway, were at most only partially activated under cellobiose conditions. To separate correlations from causative effects, the expression levels of 19 transcription factors perturbed under cellobiose conditions were modulated, and the three strongest promoters under cellobiose conditions were applied to fine-tune expression of the heterologous cellobiose-utilizing pathway. Of the changes in these 19 transcription factors, only overexpression of SUT1 or deletion of HAP4 consistently improved cellobiose fermentation. SUT1 overexpression and HAP4 deletion were not synergistic, suggesting that SUT1 and HAP4 may regulate overlapping genes important for improved cellobiose fermentation. Transcription factor modulation coupled with rational tuning of the cellobiose consumption pathway significantly improved cellobiose fermentation. We used systems-level input to reveal the regulatory mechanisms underlying suboptimal metabolism of the non-glucose sugar cellobiose. By identifying key transcription factors that cause suboptimal cellobiose fermentation in engineered S. cerevisiae, and by fine-tuning the expression of a heterologous cellobiose consumption pathway, we were able to greatly improve cellobiose fermentation by engineered S. cerevisiae. Our results demonstrate a powerful strategy for applying systems biology methods to rapidly identify metabolic engineering targets and overcome bottlenecks in performance of engineered strains.

09 BIOMASS FUELS↗

Red Wine Fermentation Alters Grape Seed Morphology and Internal Porosity

During wine fermentation, grape berry components, including seeds, undergo extensive physical and chemical changes that result in the release of flavonoids, such as tannins, from seeds into wine. Understanding changes in seed morphology during fermentation is crucial for aiding the development of accurate prediction models for flavonoid extraction during winemaking, which enhances fermentation management and ensures consistency in wines from year to year. High-resolution x-ray microcomputed tomography (x-ray μCT) was used to investigate the effect of red wine fermentation on changes in grape seed morphology. Using a PyTorch-based implementation of a fully convolutional network with a Resnet-101 backbone for semantic segmentation of x-ray μCT images, we quantified extensive alteration to grape seed structure during fermentation. Image analyses revealed the development of a pore network breaking apart the seed endosperm by the end of fermentation, leading to an increase in surface area. Fermentation significantly altered grape seed morphology. Such alterations could enable transport of seed flavonoids from inside the endosperm and integument to outside the seed. Further research on the physical processes occurring in seeds during wine fermentation is necessary to build better physiochemical models.

59 BASIC BIOLOGICAL SCIENCES↗

Crabtree/Warburg-like aerobic xylose fermentation by engineered Saccharomyces cerevisiae

Bottlenecks in the efficient conversion of xylose into cost-effective biofuels have limited the widespread use of plant lignocellulose as a renewable feedstock. The yeast Saccharomyces cerevisiae ferments glucose into ethanol with such high metabolic flux that it ferments high concentrations of glucose aerobically, a trait called the Crabtree/Warburg Effect. In contrast to glucose, most engineered S. cerevisiae strains do not ferment xylose at economically viable rates and yields, and they require respiration to achieve sufficient xylose metabolic flux and energy return for growth aerobically. Here, we evolved respiration-deficient S. cerevisiae strains that can grow on and ferment xylose to ethanol aerobically, a trait analogous to the Crabtree/Warburg Effect for glucose. Through genome sequence comparisons and directed engineering, we determined that duplications of genes encoding engineered xylose metabolism enzymes, as well as TKL1, a gene encoding a transketolase in the pentose phosphate pathway, were the causative genetic changes for the evolved phenotype. Reengineered duplications of these enzymes, in combination with deletion mutations in HOG1, ISU1, GRE3, and IRA2, increased the rates of aerobic and anaerobic xylose fermentation. Importantly, we found that these genetic modifications function in another genetic background and increase the rate and yield of xylose-to-ethanol conversion in industrially relevant switchgrass hydrolysate, indicating that these specific genetic modifications may enable the sustainable production of industrial biofuels from yeast. We propose a model for how key regulatory mutations prime yeast for aerobic xylose fermentation by lowering the threshold for overflow metabolism, allowing mutations to increase xylose flux and to redirect it into fermentation products.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of dietary fiber fermentation on short‐chain fatty acid production and microbial composition in vitro

Abstract BACKGROUND The efficient utilization of fiber‐rich co‐products is important for optimizing feed resource utilization and animal health. This study was conducted to evaluate the fermentation characteristics of fiber‐rich co‐products, which had equal quantities of total dietary fiber (TDF), at different time points using batch in vitro methods. It considered their gas production, short‐chain fatty acid (SCFA) production, and microbial composition. RESULTS The fermentation of wheat bran (WB) and oat bran (OB) showed higher and faster ( P < 0.05) gas and SCFA production than corn bran (CB), sugar beet pulp (SBP), and soybean hulls (SH). The α ‐diversity was higher in the CB, SBP, and SH groups than in the WB and OB groups ( P < 0.05). At the phylum level, OB and WB fermentation showed lower ( P < 0.05) relative abundance of Actinobacteria than the CB, SBP, and SH groups. At the genus level, OB and WB fermentation increased the Enterococcus population in comparison with the CB, SBP, and SH groups, whereas CB and SBP fermentation improved the relative abundance of the Christensenellaceae R‐7 group more than the WB, OB, and SH groups ( P < 0.05). CONCLUSION Overall, WB and OB were rapidly fermented by fecal microbiota, in contrast with SBP, SH, and CB. Fermentation of different fiber‐rich co‐products with an equal TDF content gives different responses in terms of microbial composition and SCFA production due to variations in their physicochemical properties and molecular structure. © 2020 Society of Chemical Industry

Bai, Yu↗

Expression of Gre2p improves tolerance of engineered xylose-fermenting Saccharomyces cerevisiae to glycolaldehyde under xylose metabolism

Engineered S. cerevisiae employing the xylose reductase pathway enables efficient xylose valorization to fuels and chemicals. However, toxicity of thermochemically pretreated biomass hydrolysate on S. cerevisiae is one of the key technical challenges to upgrade biomass-derived sugars including xylose and glucose into high-value products. We investigated the effect of glycolaldehyde, one of the biomass-derived highly toxic aldehyde compounds, and its combinatorial inhibitory effect with other major fermentation inhibitors commonly found in plant hydrolysate such as methylglyoxal, 5-HMF, furfural, vanillin, and acetic acid on engineered xylose-fermenting S. cerevisiae in xylose and/or glucose media. We elucidated that glycolaldehyde and methylglyoxal are the key inhibitory short-aliphatic aldehydes on engineered xylose-fermenting S. cerevisiae in xylose-containing medium. Indeed, the degree of toxicity of these tested fermentation inhibitors varies with the sole carbon source of the medium. We demonstrate that genome integration of an extra copy of autologous GRE2 with its native promotor substantially improved the toxic tolerance of engineered xylose-fermenting S. cerevisiae to major inhibitory compounds including glycolaldehyde in the xylose-containing medium, and xylose-rich, lignocellulosic hydrolysate derived from Miscanthus giganteus, and concurrently improved the ethanol fermentation profile. In conclusion, outcomes of this study will aid the development of next-generation robust S. cerevisiae strains for efficient fermentation of hexose and pentose sugars found in biomass hydrolysate.

09 BIOMASS FUELS↗

Effects of Saccharomyces cerevisiae quorum sensing signal molecules on ethanol production in bioethanol fermentation process

Here in this study, the concentrations of Saccharomyces cerevisiae quorum sensing signal molecules (QSMs) were determined, not to mention the exploration of the effects of exogenous S. cerevisiae QSMs on the sole fermentation of S. cerevisiae and co-fermentation of S. cerevisiae and Lactobacillus plantarum. The results showed that the concentrations of three signal molecules (2-phenylethanol (2-PE), tyrosol and tryptophan) produced by S. cerevisiae increased with a higher bacteria density, which tends to become stable up to 118.02, 32.05 and 1.93 mg/L respectively when cultivating for 144 h. Among the three signaling molecules, only 2-PE promoted the ethanol production capacity of S. cerevisiae. The ethanol concentration of the sole fermentation of S. cerevisiae loaded with 120 mg/L 2-PE reached 3.2 g/L in 9 h, which was 58.7% higher than that of the group without 2-PE addition. Moreover, 2-PE reduced the negative impact of L. plantarum on S. cerevisiae. Within 12 h of the co-fermentation of L. plantarum and S. cerevisiae, the ethanol concentration in the co-fermentation group loaded with 2-PE reached 5.6 g/L, similar to that in the group fermenting with sole S. cerevisiae, and the yeast budding rate was also restored to 28.51%. qRT-PCR results of S. cerevisiae which was in sole fermentation with 2-PE addition for 9 h showed that the relative expression levels of ethanol dehydrogenase gene ADH1 in S. cerevisiae decreased by 25% and the relative expression levels of MLS1, CIT2, IDH1,CIT1 decreased by 26%, 30%, 22%,18%, respectively, meant that the glyoxylic and tricarboxylic acid cycles were greatly inhibited, which promotes the accumulation of ethanol. The results of this study provide basic data for using QSMs more than antibiotics in the the prevention of contamination during the industrialized bioethanol production.

2-phenylethanol↗

PKA and HOG signaling contribute separable roles to anaerobic xylose fermentation in yeast engineered for biofuel production

Lignocellulosic biomass offers a sustainable source for biofuel production that does not compete with food-based cropping systems. Importantly, two critical bottlenecks prevent economic adoption: many industrially relevant microorganisms cannot ferment pentose sugars prevalent in lignocellulosic medium, leaving a significant amount of carbon unutilized. Furthermore, chemical biomass pretreatment required to release fermentable sugars generates a variety of toxins, which inhibit microbial growth and metabolism, specifically limiting pentose utilization in engineered strains. Here we dissected genetic determinants of anaerobic xylose fermentation and stress tolerance in chemically pretreated corn stover biomass, called hydrolysate. We previously revealed that loss-of-function mutations in the stress-responsive MAP kinase HOG1 and negative regulator of the RAS/Protein Kinase A (PKA) pathway, IRA2, enhances anaerobic xylose fermentation. However, these mutations likely reduce cells’ ability to tolerate the toxins present in lignocellulosic hydrolysate, making the strain especially vulnerable to it. We tested the contributions of Hog1 and PKA signaling via IRA2 or PKA negative regulatory subunit BCY1 to metabolism, growth, and stress tolerance in corn stover hydrolysate and laboratory medium with mixed sugars. We found mutations causing upregulated PKA activity increase growth rate and glucose consumption in various media but do not have a specific impact on xylose fermentation. In contrast, mutation of HOG1 specifically increased xylose usage. We hypothesized improving stress tolerance would enhance the rate of xylose consumption in hydrolysate. Surprisingly, increasing stress tolerance did not augment xylose fermentation in lignocellulosic medium in this strain background, suggesting other mechanisms besides cellular stress limit this strain’s ability for anaerobic xylose fermentation in hydrolysate.

09 BIOMASS FUELS↗