SEARCH · Search NASA

Results for “flat”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Type-II Weyl nodes, flat bands, and evidence for a topological Hall-effect in the new ferromagnet FeCr 3 Te 6

The interplay between linearly dispersing, or Dirac-like, and flat electronic bands, for instance, in the kagome ferromagnets, has attracted attention due to a possible interplay between topology and electronic correlations. Here, we report the synthesis, structural, electrical, and magnetic properties of a single-crystalline ferromagnetic compound, namely Fe 1/3 ⁢CrTe 2 or FeCr 3 ⁢Te 6 , which crystallizes in the 𝑃$\overline{3}$⁢𝑚⁢1 space group instead of the 𝐼⁢2/𝑚 previously reported for FeCr 2 ⁢Te 4 . Electronic band structure calculations reveal type-II Dirac nodes and relatively flat bands near the Fermi level (ε 𝐹 ). This compound shows onset Curie temperature 𝑇 c ≃ 120K, followed by an additional ferromagnetic transition near 𝑇 c2 ∼ 92.5K. Below 𝑇 c , FeCr 3 ⁢Te 6 displays a pronounced anomalous Hall effect, as well as sizable coercive fields that exceed 𝜇 0 ⁢𝐻=1 T at low 𝑇⁢s. However, a scaling analysis indicates that the anomalous Hall effect results from a significant intrinsic contribution, as expected from the calculations, and also from the extrinsic mechanism, i.e., scattering. The extrinsic contribution probably results from occupational disorder at the 1b Fe-site within the van der Waals gap of the CrTe 2 host. We also observe evidence for a topological Hall component superimposed onto the overall Hall response, suggesting the presence of chiral spin textures akin to skyrmions in this centrosymmetric system. Their possible presence will require experimental confirmation.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Flat band driven itinerant magnetism in the Co-pnictides CaCo 2⁢ As 2 and LaCo 2 ⁢P 2

Flat bands can induce strong electron correlation effects that help stabilize both magnetic and superconducting states. Here, in this study, we carry out angle-resolved photoemission spectroscopy and density functional theory calculations to study the electronic structure of the Co-pnictides CaCo 2 ⁢As 2 and LaCo 2 ⁢P 2 . We find that the 𝑘 𝑧 Fermi topology of ferromagnetic LaCo 2 ⁢P 2 is markedly two-dimensional, while the antiferromagnetic CaCo 2 ⁢As 2 develops a 3D Fermi surface described by a zigzaglike band dispersion perpendicular to the Co-As plane. Furthermore, the magnetism is driven by the electronic correlations of the flat bands with 𝑑 𝑥⁢𝑦 and 𝑑 𝑧 2 orbital character at the Fermi level. Our results link the electronic dimensionality and the magnetic order and emphasize the critical role of the As-As and P-P bond strength along the 𝑐 direction to understand the electronic band structure and the rich phase diagram of transition metal pnictides.

36 MATERIALS SCIENCE↗

DOE OSTI2024

AmeriFlux FLUXNET-1F US-UTB UFLUX Bonneville Salt Flats

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-UTB UFLUX Bonneville Salt Flats. This is the FLUXNET version of the carbon flux data for the site US-UTB UFLUX Bonneville Salt Flats produced by applying the standard ONEFlux (1F) software. Site Description - Enclosed in fence; Piezometers nearby; Replaced smaller standard station BFLAT

Ladig, Kathryn↗

DOE OSTI2025

Existence of a flat band in highly correlated metal BaCo 2 P 2

We report on the observation of a flat band situated at the Fermi level E F along with the structural, electrical transport, and magnetic properties of BaCo 2 P 2 that crystallizes in the ThCr 2 Si 2 -type body-center tetragonal structure. This compound has the largest inter-layer pnictide (Pn) distance d Pn–Pn as well as the largest c/a ratio among all the known ACo 2 Pn 2 (A = alkaline earth metal) compounds, where a and c are the tetragonal lattice parameters. Hence, the magnetic and electronic properties of this compound are expected to have a quasi-two-dimensional character. Despite the evidence of the presence of sizable magnetic interactions, magnetic susceptibility χ(T) of BaCo 2 P 2 does not show magnetic ordering down to 1.8 K. The material shows good metallic conduction with a large residual resistivity ratio ρ 300 K /ρ 1.8 K ≈ 70 and a Fermi liquid behavior at low temperature. Kadowaki–Woods ratio R KW of BaCo 2 P 2 suggests the presence of sizable electronic correlations within this system. Additionally, a large many-body enhancement of 2.3 of the experimental density of states D γ (E F ) over the band-structure D band (E F ) is inferred to arise from sizable electron-electron and/or electron-phonon interactions leading to a substantial deviation from the free-electron behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

An infrared on-shell action and its implications for soft charge fluctuations in asymptotically flat spacetimes

We study the infrared on-shell action of Einstein gravity in asymptotically flat spacetimes (AFSs), obtaining an effective, gauge-invariant boundary action for memory and shockwave spacetimes. We show that the phase space is in both cases parameterized by the leading soft variables in AFSs, thereby extending the equivalence between shockwave and soft commutators to spacetimes with non-vanishing Bondi mass. We then demonstrate that our on-shell action is equal to three quantities studied separately in the literature: (i) the soft supertranslation charge; (ii) the shockwave effective action, or equivalently the modular Hamiltonian; and (iii) the soft effective action. Finally, we compute the quantum fluctuations in the soft supertranslation charge and, assuming the supertranslation parameter may be promoted to an operator, we obtain an area law, consistent with earlier results showing that the modular Hamiltonian has such fluctuations.

asymptotically flat spacetimes↗

DOE OSTI2026

Flat-band driven Kondo breakdown and reentrant effects in heavy-fermion moiré superlattices

Moiré superlattices (MSLs) in van der Waals heterostructures have demonstrated their incredible power in driving emergent electronic phenomena, some of which are reminiscent of those usually only observed in bulk strongly correlated quantum materials. With the recent discovery of van der Waals 𝑓-electron materials, the design of novel MSLs of intrinsic strong correlation is now within the reach. Here we study the novel electron phases of two-dimensional heavy-fermion MSL with increasingly diluted 𝑓-electron local moments. By applying dynamical mean-field theory with numerical renormalization group as an impurity solver, we demonstrate the appearance of a different energy scale and a reentrant Kondo breakdown in connection with the emergence of a flat band in the system. We further compare our numerical findings with predictions derived from the Lieb-Mattis theorem and show the necessity of this energy scale to consistently reconcile the predictions with the conventional single-impurity limit for exceedingly large unit cells.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Observation of multiple flat bands and Van Hove singularities in the distorted kagome metal NdTi 3 Bi 4

Kagome materials have attracted enormous research interest recently owing to their diverse topological phases and manifestation of electronic correlation. Here, in this study, we present the electronic structure of a distorted ferromagnetic kagome metal, NdTi 3 ⁢Bi 4 , exhibiting a transition temperature of 9 K. Our investigation employs a combination of angle-resolved photoemission spectroscopy (ARPES) measurements and density functional theory (DFT) calculations. We discover the presence of two “flat” bands which are found to originate from the kagome structure formed by Ti atoms with a major contribution from Ti 𝑑 𝑥⁢𝑦 and Ti 𝑑 𝑥 2 −𝑦 2 orbitals. We also observed multiple Van Hove singularities (VHSs) in its electronic structure, with one VHS lying near the Fermi level. The ARPES data reveal the existence of Dirac cone at the $\overline{𝐾}$ point, a finding which is corroborated by our DFT calculations. These findings present a detailed electronic structure capable of hosting correlation-driven phenomenon in this novel ferromagnetic kagome metal.

Fermi surface↗

DOE OSTI2025

Symmetry breaking forms split-off flat bands in quantum oxides controlling metal versus insulator phases

The crystal structure used as input to electronic structure calculation of conventionally bonded solids consists primarily of the standard crystallographic degrees of freedom. Quantum solids sometimes have additional microscopic degrees of freedom (m-DOF) nested within the crystallographic structure. These might include local motifs including positional (Peierls dimers, deformed octahedra, Jahn-Teller distortions), magnetic (local moment configurations) and dipolar (local ferroelectric configurations). Such motifs can be observed experimentally via local probes that avoid averaging, and theoretically as distinct total energy lowering features relative to more simplified “average crystallographic structures”. Here we examine the ability of electronic structure methods independent of strong correlation physics to explain the broad phenomenology of metal-insulator selectivity in quantum oxides by energy-lowering symmetry breaking. We do this by avoiding the restriction of considering only (i) electron-electron interactions in a fixed unresponsive lattice—as done in Mott strong correlation explanations—allowing, however, (ii) local positional and magnetic motifs that coexist within a crystallographic landscape. We find in a broad range of quantum oxides with different symmetry breaking modes the formation of split-off flat bands that can also control metallic versus insulating characteristics. The split-off band effect is common to magnetic and non-magnetic materials, including both binary and ternary oxides. One finds that when such local symmetry breaking motifs are considered in mean-field-like (e.g. density functional theory) electronic structure calculations of quantum oxides, they explain many of the observed trends in metal vs insulator phases discussed otherwise in prior literature via strong correlation in symmetry unbroken view.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Flat nonlinear optics with intersubband polaritonic metasurfaces

Nonlinear intersubband polaritonic metasurfaces produce some of the strongest second- and third-order nonlinear optical responses reported for condensed matter systems at infrared frequencies. These metasurfaces are fabricated as two-dimensional arrays of nanoresonators from multi-quantum-well semiconductor heterostructures, designed to produce strong nonlinear responses associated with intersubband transitions. By optimally coupling the optical modes of the nanoresonators to vertically polarized intersubband transitions in semiconductor heterostructures, one can boost the nonlinear response associated with intersubband transitions, make intersubband transitions interact with free-space radiation at normal incidence, and hence produce optically thin flat nonlinear optical elements compatible with free-space optical setups. As a result of the strong nonlinear response in these systems, significant nonlinear conversion efficiencies (>0.1 %) can be attained in deeply subwavelength optical films using modest pumping intensities of only 10–100 kW/cm 2 . Subwavelength metasurface thickness relaxes phase-matching constraints limiting the operation of bulk nonlinear crystals. Furthermore, the amplitude and phase of the nonlinear optical response in intersubband polaritonic metasurfaces can be tailored for a specific pump wavelength and a nonlinear process of interest through the co-optimization of quantum engineering of electron states in semiconductor heterostructures and photonic engineering of the metasurface nanoresonators design. Additionally, an applied voltage can dynamically control the amplitude and phase of the nonlinear optical response at a nanoresonator level. Here, we review the current state of the art in this rapidly expanding field, focusing on nonlinear processes supporting second-harmonic generation, saturable absorption, and optical power limiting.

flat optics↗

DOE OSTI2025

Innovative Symmetrical Electrolyte Architecture Enables Ultra-Flat and Thermal Resilient Protonic Ceramic Electrochemical Cells

Protonic ceramic electrochemical cells (PCECs) represent a promising class of solid‐state energy conversion devices capable of high‐efficiency hydrogen production and power generation. However, the practical deployment of planar PCECs is fundamentally constrained by severe structural deformation and mechanical failure during fabrication, stemming from asymmetric shrinkage between the thin electrolyte and the thick NiO‐based support layer. Here, in this work, a functionally integrated, symmetry‐engineered double‐sided electrolyte (DE) design is unveiled, which not only suppresses thermally induced curvature but also unlocks significant gains in electrochemical performance and stability. This architecture intrinsically balances shrinkage dynamics across the cell bilaterally, enabling the fabrication of ultra‐flat 5 × 5 cm 2 cells with sub‐100 µm thickness variation. A numerical solid mechanics simulation is introduced to investigate and interpret this achievement. Beyond structural advantages, the DE configuration enhances the cell operational stability, delivering a low open‐circuit voltage degradation of 9.5 mV/100 h across 80 thermal cycles. This work establishes a compelling paradigm wherein architectural symmetry directly translates to both mechanical fidelity and functional enhancement, offering a promising route toward PCECs scale‐up.

08 - HYDROGEN↗

DOE OSTI2024

Singular Hall Response from a Correlated Ferromagnetic Flat Nodal‐Line Semimetal

Abstract Topological quantum phases are largely understood in weakly correlated systems, which have identified various quantum phenomena, such as the spin Hall effect, protected transport of helical fermions, and topological superconductivity. Robust ferromagnetic order in correlated topological materials particularly attracts attention, as it can provide a versatile platform for novel quantum devices. Here, a singular Hall response arising from a unique band structure of flat topological nodal lines in combination with electron correlation in a van der Waals ferromagnetic semimetal, Fe 3 GaTe 2 , with a high Curie temperature ofT c = 347 K is reported. High anomalous Hall conductivity violating the conventional scaling, resistivity upturn at low temperature, and a large Sommerfeld coefficient are observed in Fe 3 GaTe 2 , which implies heavy fermion features in this ferromagnetic topological material. The scanning tunneling microscopy, circular dichroism in angle‐resolved photoemission spectroscopy, and theoretical calculations support the original electronic features of the material. Thus, low‐dimensional Fe 3 GaTe 2 with electronic correlation, topology, and room‐temperature ferromagnetic order appears to be a promising candidate for robust quantum devices.

Chemistry↗

DOE OSTI2025

2-loop scattering on superstring and supermembrane in flat space

We consider the S-matrix of transverse scalar excitations on an infinite D = 10 GS superstring and D = 11 supermembrane in flat target space. We compute the 4-particle scattering amplitude in the 2-loop approximation and demonstrate that, like in the Nambu string case, the D = 10 GS string S-matrix does not contain non-trivial 2d UV divergences (UV pole not accompanied by terms with logarithms of momenta is an artifact of dimensional regularization). This is consistent with underlying integrability of this model which is maintaining by adding appropriate local counterterms. In the supermembrane case there are no 1-loop divergences but we find a genuine 2-loop UV pole. This demonstrates non-finiteness of the world-volume S-matrix of the M2 brane theory.

AdS-CFT Correspondence↗

DOE OSTI2026

Hygrothermal aging effects on polyimide and acrylate-based adhesive materials in high-performance flat-flex cable assemblies

Flat-flex assemblies are widely used across a diverse range of technologies, including consumer electronics, automotive systems, aerospace and defense applications, and medical devices, due to their compact form factor and flexibility. However, environmental stressors like temperature and humidity are known to degrade performance over time, though the main mechanisms for degradation remain unknown. Here, in this work, we examined the aging behavior of copper/polyimide/adhesive laminate systems under varying temperature and humidity conditions, focusing on material degradation and its effects on mechanical and dielectric properties. Results show that peel strength and breakdown voltage decrease with exposure time, temperature, and humidity; spectroscopic characterization revealed that the adhesive, and not the polyimide, is the weak link in the material stack-up. The adhesive, identified as a butyl acrylate-acrylonitrile (BA-AN) copolymer, exhibited age-related spectral changes that correlated with exposure severity and duration. Hydrolysis at BA ester and AN nitrile groups was identified as the primary degradation mechanism, producing amides, acids, and alcohols. We developed a mechanistic model that connects kinetic parameters for BA-AN spectral band decay to peel strength and breakdown voltage, and implicates hydrolysis at the AN moiety, not BA, in performance decrements. Modeling predictions at ambient conditions indicate faster decline in peel strength than dielectric strength at early times, followed by plateauing of both properties at longer times. These findings provide critical insights into laminate aging mechanisms and highlight the importance of addressing BA-AN degradation to improve the long-term reliability of these systems in high-humidity environments.

organic↗

DOE OSTI2025

Application of soot carbonization kinetics to deduce meaningful soot formation rates in premixed flat flames

Soot formation rates measured in fuel-rich premixed flat flames are frequently used to calibrate or validate chemical kinetic models of soot formation. Unfortunately, these flames feature an extended region of soot precursor particle inception and carbonization that complicates interpretation of soot measurements and leads to a fundamental inconsistency in the nature of the soot material that is modeled versus what is being measured when using non-intrusive, optical techniques. In the work presented here, previously reported data on two canonical sooting ethylene-air premixed flames at 1 atm pressure are interpreted via a new analysis approach that combines soot optical dispersion coefficient measurements with soot carbonization kinetics. This analytical approach explicitly accounts for the production of poorly ordered soot precursor particle mass and its carbonization over time in the flames, providing a clear distinction between the formation rate of precursor particles and their transformation into ordered, solid soot particulate mass. In particular, the results of the analysis show that the precursor particles form much earlier in the flame than the majority of the carbonized soot and their formation rate is two to three times faster than that of ordered soot. The results also show that particle agglomeration begins when the particles are at an intermediate state of carbonization. In conclusion, these results offer a valuable new interpretation of these important datasets and should lead to substantial improvements in the development and calibration of quantitative soot models.

Soot formation↗

DOE OSTI2025

Discrepant wear behavior of carbon nanotubes (CNTs) and dispersant in four-ball unidirectional and ball-on-flat reciprocating sliding tests

Carbon nanotubes (CNTs), basically rolled graphene sheets, have been studied lately as oil additives in the literature. However, we observed discrepant impact of CNTs on wear protection from two common tribological tests, four-ball unidirectional sliding and high frequency reciprocating rig (HFRR) ball-on-flat reciprocating sliding. To gain a stable suspension and dispersion of the CNTs in the oil, the CNT surface was functionalized with a phenyl ligand and a dispersant, polyisobutylene succinimide (PIBSI), was added. In the four-ball test, PIBSI alone failed to protect the surface but the CNTs effectively reduced the wear loss. The observations in the HFRR test however were the opposite: the PIBSI alone provided strong wear reduction but the CNTs had no positive impact. Here, such a discrepancy was hypothetically attributed to the different wear protection mechanisms by the PIBSI and CNTs which responded distinctively under different testing conditions. Additional unidirectional and reciprocating sliding tests with matching Hertzian contact pressures were able to validate the hypothesis. Worn surface morphological examination and tribofilm chemical analysis further supported the proposed wear mechanisms. Fundamental understanding gained in this study provides insights into the potential benefits and limitations of using CNTs in lubrication.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Ab Initio Structures and Energetics of Hydrated Flat and Terrace-Step Surfaces of Forsterite (Mg 2 SiO 4 )

Forsterite (Mg 2 SiO 4 ), a model divalent metal silicate mineral, has been extensively studied in the context of mineral carbonation. Although dissolution is a key step in this process, the mechanisms by which forsterite dissolves under high CO 2 conditions remain poorly understood. Atomistic simulations could aid in exploring these mechanisms, but it is essential first to understand the structures and energetics of the relevant forsterite surfaces. We present an ab initio study of the structure and surface energy at 0 K of the flat $(010), (110), (001), (111), (021), (101)$ and $(120)$ faces of forsterite using the density functional PBE Hamiltonian and a plane-wave basis set. Dry surfaces became stabilized upon hydration through the formation of bonds between surface Mg and O from water, as well as by the formation of hydrogen bonds. According to surface energy values, the stability order of the hydrated forsterite faces was found to be $(120) < (101) < (021) < (111) < (001) < (110) < (010)$. We also investigated the energetics of the terrace-step $(0\bar{41})$ surface as a model site for forsterite dissolution. Among all the facets, the $(0\bar{41})$ surface is the least stable termination in water. Hydration of Mg atoms on the $(0\bar{41})$ surface increases their susceptibility to dissolution. The presence of a step and its hydration destabilizes the terraces, making step retreat more likely than a dissolution front advancing along the [010] direction. This research will support future simulations to investigate forsterite dissolution in water under CO 2 -rich conditions.

PBE Hamiltonian↗

DOE OSTI2025

Spin excitations and flat electronic bands in a Cr-based kagome superconductor

In the quest for topology- and correlation-driven quantum states, kagome lattice materials have garnered significant interest for their band structures, featuring flat bands (FBs) from the quantum destructive interference of the electronic wavefunction. Tuning an FB to the chemical potential could induce electronic instabilities and emergent orders. Despite extensive studies, direct evidence of FBs tuned to the chemical potential and their role in emergent orders in bulk materials remains lacking. Using angle-resolved photoemission spectroscopy, resonant inelastic X-ray scattering, and density functional theory, we show that the low-energy structure of the Cr-based kagome metal superconductor CsCr 3 Sb 5 is dominated by FBs at the Fermi level. We also observe low-energy magnetic excitations evolving across the low-temperature transition, largely consistent with the FB shift. Our results suggest that the low-temperature order contains a magnetic origin and that the kagome FBs may play a role in the emergence of this order.

electronic properties and materials↗

DOE OSTI2026

Engineering phase-frustration-induced flat bands in an aza-triangulene covalent kagome lattice

π-Conjugated covalent organic frameworks provide a versatile molecular scaffold for the realization of designer quantum nanomaterials. Strong electron–electron correlation within these artificial lattices can give rise to exotic phases of matter. Their experimental realization, however, requires precise control over orbital symmetry, charge localization and band dispersion, all arising from the effective hybridization between molecular linkers and nodes. Here we present a modular strategy for constructing diatomic kagome lattices from aza-[3]triangulene nodes, in which a D 3h -symmetric ground state is stabilized through resonance contributions from a cumulenic linker. First-principles density functional theory and scanning tunnelling spectroscopy reveal that the hybridization of a sixfold-degenerate set of edge-localized Wannier functions in the unit cell gives rise to orbital-phase-frustration-induced non-trivial flat bands. These results establish a general design principle for engineering orbital interactions in organic lattices and open a pathway towards programmable covalent-organic-framework-based quantum materials with correlated electronic ground states.

conjugated polymers↗