SEARCH · Search NASA

Results for “floating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Fixed-bias floating double-probe technique with simple Langmuir-probe characteristics.

A new floating double-probe method is presented which has advantages over other floated-probe systems heretofore described in the literature. The method utilizes two electrodes, one of constant area and the other with a variable area, and the two-electrode configuration is separated by a fixed bias voltage. The current-voltage characteristics of the new technique, which are generated by varying the area of one electrode, are identical to those of a simple Langmuir probe, thus coupling all the advantages of a floated-probe system with the simple analysis scheme generally applied to the Langmuir probe for the determination of plasma density and temperature.

Szuszczewicz, E. P.↗

NASA NTRS1974

Studies of liquid floating zones on SL-IV, the third Skylab mission

The behavior of liquid floating zones in a zero-gravity environment was studied by Dr. E. Gibson on SL-4. These experiments were designed from the results of previous work on floating zones in a simulated zero-gravity model. Molten floating zones are used on earth for the crystal growth and zone refining of reactive materials. The Skylab studies give some insight into the problems associated with the development of the technique for the future space processing of materials. Preliminary results are presented on the stability of the liquid zone surface under static, rotational and vibrational conditions without gravitational constraints.

Carruthers, J. R.↗

NASA NTRS1975

Geophysical studies of floating ice by remote sensing

This paper presents an overview of recent remote-sensing techniques as applied to geophysical studies of floating ice. The current increase in scientific interest in floating ice has occurred during a time of rapid evolution of both remote-sensing platforms and sensors. Mesoscale and macroscale studies of floating ice are discussed under three sensor categories: visual, passive microwave, and active microwave. The specific studies that are reviewed primarily investigate ice drift and deformation, and ice type and ice roughness identification and distribution.

Campbell, W. J.↗

NASA NTRS1976

Float-zone processing in a weightless environment

The results were reported of investigations to: (1) test the validity of analyses which set maximum practical diameters for Si crystals that can be processed by the float zone method in a near weightless environment, (2) determine the convective flow patterns induced in a typical float zone, Si melt under conditions perceived to be advantageous to the crystal growth process using flow visualization techniques applied to a dimensionally scaled model of the Si melt, (3) revise the estimates of the economic impact of space produced Si crystal by the float zone method on the U.S. electronics industry, and (4) devise a rational plan for future work related to crystal growth phenomena wherein low gravity conditions available in a space site can be used to maximum benefit to the U.S. electronics industry.

Fowle, A. A.↗

NASA NTRS1975

Investigation of field induced trapping on floating gates

The development of a technology for building electrically alterable read only memories (EAROMs) or reprogrammable read only memories (RPROMs) using a single level metal gate p channel MOS process with all conventional processing steps is outlined. Nonvolatile storage of data is achieved by the use of charged floating gate electrodes. The floating gates are charged by avalanche injection of hot electrodes through gate oxide, and discharged by avalanche injection of hot holes through gate oxide. Three extra diffusion and patterning steps are all that is required to convert a standard p channel MOS process into a nonvolatile memory process. For identification, this nonvolatile memory technology was given the descriptive acronym DIFMOS which stands for Dual Injector, Floating gate MOS.

Gosney, W. M.↗

NASA NTRS1977

Computation of the inviscid supersonic flow about cones at large angles of attack by a floating discontinuity approach

The technique of floating shock fitting is adapted to the computation of the inviscid flowfield about circular cones in a supersonic free stream at angles of attack that exceed the cone half-angle. The resulting equations are applicable over the complete range of free-stream Mach numbers, angles of attack and cone half-angles for which the bow shock is attached. A finite difference algorithm is used to obtain the solution by an unsteady relaxation approach. The bow shock, embedded cross-flow shock, and vortical singularity in the leeward symmetry plane are treated as floating discontinuities in a fixed computational mesh. Where possible, the flowfield is partitioned into windward, shoulder, and leeward regions with each region computed separately to achieve maximum computational efficiency. An alternative shock fitting technique which treats the bow shock as a computational boundary is developed and compared with the floating-fitting approach. Several surface boundary condition schemes are also analyzed.

Daywitt, J.↗

NASA NTRS1979

Prediction of ion drift effects on spacecraft floating potentials

The plasma environment of high altitude spacecraft was observed to involve ion drift velocities which sometimes become comparable to ion mean thermal speeds. Such drifts may cause an electrically isolated spacecraft surface to float at a substantially increased negative potential if it is simultaneously shaded and downstream relative to the drift direction. The results showed that: (1) the ion speed ratio at which drift effects become important (i.e. change the floating potential by at least 10 percent) can be as low as 0.1, and may be decreased if the ambient electrons are non-Maxwellian; (2) the effects of ion speed ratio increase with increasing ion-to-electron temperature ratio; and (3) negative floating potentials for drifting Maxwellian ion velocity distributions with speed ratio unity are typically about twice as large as the corresponding potentials for nondrifting conditions.

Chang, J. S.↗

NASA NTRS1980

Science Requirements Working Group (SRWG) in float zone materials processing in space: A review

A summary and history of the Float Zone Working Group was presented. The functions of this working group are to: provide an informal forum of scientific investigators for the exchange of information and ideas in the approach of the solution of common problems in float zone processing, help plan the research and development necessary to place the float zone process on a firm base of scientific understanding and advanced technological development, establish the science requirements for the AFZES for Spacelab, and seek ways to maximize the advantages of the space environment in the pursuit of these goals.

Fowle, A. A.↗

NASA NTRS1980

Float zone experiments

The objectives of this work are: to determine if surface tension-driven convection in float zone experiments may be controlled by means of surface films; and if convection can be controlled, determine whether homogeneous solute distributions will be achieved in float zone solidification and whether accurate measurements of liquid diffusion coefficients may be obtained from float zone solidification experiments. Sn was chosen as a model material because it is a group IV element, chemically similar to Si and Ge and its low melting point and low vapor pressure allow Auger spectroscopy to be employed with liquid samples.

Verhoeven, J.↗

NASA NTRS1983

The control of float zone interfaces by the use of selected boundary conditions

The main goal of the float zone crystal growth project of NASA's Materials Processing in Space Program is to thoroughly understand the molten zone/freezing crystal system and all the mechanisms that govern this system. The surface boundary conditions required to give flat float zone solid melt interfaces were studied and computed. The results provide float zone furnace designers with better methods for controlling solid melt interface shapes and for computing thermal profiles and gradients. Documentation and a user's guide were provided for the computer software.

Foster, L. M.↗

NASA NTRS1984

Float zone experiments in space

The molten zone/freezing crystal interface system and all the mechanisms were examined. If Marangoni convection produces oscillatory flows in the float zone of semiconductor materials, such as silicon, then it is unlikely that superior quality crystals can be grown in space using this process. The major goals were: (1) to determine the conditions for the onset of Marangoni flows in molten tin, a model system for low Prandtl number molten semiconductor materials; (2) to determine whether the flows can be suppressed by a thin oxide layer; and (3) based on experimental and mathematical analysis, to predict whether oscillatory flows will occur in the float zone silicon geometry in space, and if so, could it be suppressed by thin oxide or nitride films. Techniques were developed to analyze molten tin surfaces in a UHV system in a disk float zone geometry to minimize buoyancy flows. The critical Marangoni number for onset of oscillatory flows was determined to be greater than 4300 on atomically clean molten tin surfaces.

Verhoeven, J. D.↗

NASA NTRS1985

Float Zone Experiments in Space

The objective of this work has been to evaluate whether or not Marangoni flow could be suppressed in molten metals by the presence of very thin oxide films. Experimental work has been carried out on molten Sn under UHV conditions. A disk floating zone arrangement was developed to allow in situ Auger examination of molten surfaces. An electron energy loss technique was developed which allows detection of continuous tin oxide films of 6 A or greater. Experiments were planned to detect the effects of oxide formation upon Marangoni flow by measuring: (1) temperature profiles, (2) solid liquid interface shapes, (3) macrosegregation, and (4) the onset of oscillatory Marangoni flow by detecting oscillating temperature variations. Work on (4) showed that oscillatory temperature variations of frequency or = 10 Hz were not present in the disk float zone geometry under conditions of Ma = 4300 with an oxide free molten surface. The disk float zone geometry was modeled with a finite element analysis and temperature and velocity profiles were determined.

Verhoeven, J. D.↗

NASA NTRS1986

Convective effects in float-zone and Czochralski melts

The hydrodynamics of crystal-growth melts is a relatively new research area. Numerical modeling of these processes is necessary. The work discussed herein is in two parts: numerical simulations of the flow in a Czochralski melt, and also of that in a float zone. In addition, for the float-zone case, energy stability theory will be used to determine stability bounds for the onset of oscillatory thermo-capillary flow. Convective effects in crystal-growth melts arise from a variety of mechanisms. Temperature gradients both in the direction of gravity and normal to it give rise to convection due to buoyancy effects. Rotation of the crucible and/or crystal causes a forced convection which may augment or oppose the buoyancy-driven flow. Finally, thermo-capillary forces (due to the variation of surface tension with temperature) drive surface motions which in turn generate convection in the bulk fluid. All of these mechanisms are present in either Czochralski or float-zone growth. The objective of the Czochralski modeling is to develop an accurate numerical simulation of the flow in a Czochralski silicon melt and to investigate the effects of various parameters on the flow properties. Like some earlier investigations, the intent is to simulate the effects of buoyancy, forced and thermo-capillary convection, including unsteady effects. Unlike earlier work, the aim is to include the effects of a variable free surface and freezing interface and, possibly incorporate nonaxisymmetric effects.

Neitzel, G. P.↗

NASA NTRS1987

Floating emitter solar cell

A front surface contact floating emitter solar cell transistor is provided in a semiconductor body (n-type), in which floating emitter sections (p-type) are diffused or implanted in the front surface. Between the emitter sections, a further section is diffused or implanted in the front surface, but isolated from the floating emitter sections, for use either as a base contact to the n-type semiconductor body, in which case the section is doped n+, or as a collector for the adjacent emitter sections.

Chih, Sah↗

NASA NTRS1988

Liquid encapsulated float zone process and apparatus

The process and apparatus for growing crystals using float zone techniques are described. A rod of crystalline materials is disposed in a cylindrical container, leaving a space between the rod and container walls. This space is filled with an encapsulant, selected to have a slightly lower melting point than the crystalline material. The rod is secured to a container end cap at one end and to a shaft at its other end. A piston slides over the rod and provides pressure to prevent loss of volatile components upon melting of the rod. Prior to melting the rod the container is first heated to melt the encapsulant, with any off-gas from this step being vented to a cavity behind the piston. The piston moves slightly forward owing to volume change upon melting of the encapsulant, and the vent passageway is closed. The container is then moved longitudinally through a heated zone to progressively melt sections of the rod as in conventional float zone processes. The float zone technique may be used in the microgravity environment of space.

Naumann, Robert J.↗

NASA NTRS1989

Floating point arithmetic in future supercomputers

Considerations in the floating-point design of a supercomputer are discussed. Particular attention is given to word size, hardware support for extended precision, format, and accuracy characteristics. These issues are discussed from the perspective of the Numerical Aerodynamic Simulation Systems Division at NASA Ames. The features believed to be most important for a future supercomputer floating-point design include: (1) a 64-bit IEEE floating-point format with 11 exponent bits, 52 mantissa bits, and one sign bit and (2) hardware support for reasonably fast double-precision arithmetic.

Bailey, David H.↗

NASA NTRS1989

On the dynamic singularities in the control of free-floating space manipulators

It is shown that free-floating space manipulator systems have configurations which are dynamically singular. At a dynamically singular position, the manipulator is unable to move its end effector in some direction. This problem appears in any free-floating space manipulator system that permits the vehicle to move in response to manipulator motion without correction from the vehicle's attitude control system. Dynamic singularities are functions of the dynamic properties of the system; their existence and locations cannot be predicted solely from the kinematic structure of the manipulator, unlike the singularities for fixed base manipulators. It is also shown that the location of these dynamic singularities in the workplace is dependent upon the path taken by the manipulator in reaching them. Dynamic singularities must be considered in the control, planning and design of free-floating space manipulator systems. A method for calculating these dynamic singularities is presented, and it is shown that the system parameters can be selected to reduce the effect of dynamic singularities on a system's performance.

Papadopoulos, E.↗

NASA NTRS1991

The Application of a Cylindrical-spherical Floating Ring Bearing as a Device to Control Stability of Turbogenerators

The development of a new device to control stability of turbogenerators is described. The device comprises a floating ring installed between the journal and bearing housing of a fluid film bearing. The journal and the inner surface of the ring are cylindrical while the outer surface of the ring and bearing surface are spherical providing axial location of the ring and self-alignment of the bearing. The employment of this device would lead to a consistent machine performance. System stability may be controlled by changing a number of bearing and floating ring parameters. This device also offers an additional advantage of having a very low frictional characteristic. A feasibility study was carried out to investigate the suitability of the new device to turbogenerator applications. Both theoretical analysis and experimental observations were carried out. Initial results suggest that the new floating ring device is a competitive alternative to other conventional arrangements.

Leung, P. S.↗