Search NASA⌕ Search

SEARCH · Search NASA

Results for “fourier expansion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Three-dimensional fully spectral numerical method for mantle convection with depth-dependent properties

A semi-implicit fully spectral collocation method for the simulation of three-dimensional mantle convection with depth-dependent thermo-dynamic and transport properties is presented. The variable property Navier-Stokes equation expressed in terms of the primitive variable velocity and pressure is solved with the mass continuity and temperature equations. The periodic horizontal boundary conditions allow a Fourier expansion for the two horizontal directions. The stress-free, impermeable isothermal boundary conditions along with the depth dependent coefficients are handled with a Chebyshev expansion in the vertical direction. In the limit of an infinite Prandtl number appropriate to mantle convection, the inertial terms in the momentum equation are unimportant. In this case an explicit solution of a Poisson equation for pressure can be avoided; instead a fourth-order equation for vertical velocity can be solved. Simultaneous imposition of both impermeable and continuity boundary conditions during the vertical velocity evaluation is discussed. The pressure distributions on the top and bottom bounding planes were determined by means of an influence matrix technique. The numerical method employed here avoids time-splitting errors and enforces velocity boundary conditions and continuity over the entire domain, including the boundaries, to machine accuracy. Strongly time-dependent three-dimensional solutions up to a surface Rayleigh number of 1 x 10(exp 7) have been obtained. Strong upwellings, pulsating chaotically, are formed by the collective merging of cylindrical plumes.

Balachandar, S.↗
NASA NTRS1996

Aeroacoustics of Turbulent High-Speed Jets

Aeroacoustic noise generation in a supersonic round jet is studied to understand in particular the effect of turbulence structure on the noise without numerically compromising the turbulence itself. This means that direct numerical simulations (DNS's) are needed. In order to use DNS at high enough Reynolds numbers to get sufficient turbulence structure we have decided to solve the temporal jet problem, using periodicity in the direction of the jet axis. Physically this means that turbulent structures in the jet are repeated in successive downstream cells instead of being gradually modified downstream into a jet plume. Therefore in order to answer some questions about the turbulence we will partially compromise the overall structure of the jet. The first section of chapter 1 describes some work on the linear stability of a supersonic round jet and the implications of this for the jet noise problem. In the second section we present preliminary work done using a TVD numerical scheme on a CM5. This work is only two-dimensional (plane) but shows very interesting results, including weak shock waves. However this is a nonviscous computation and the method resolves the shocks by adding extra numerical dissipation where the gradients are large. One wonders whether the extra dissipation would influence small turbulent structures like small intense vortices. The second chapter is an extensive discussion of preliminary numerical work using the spectral method to solve the compressible Navier-Stokes equations to study turbulent jet flows. The method uses Fourier expansions in the azimuthal and streamwise direction and a 1-D B-spline basis representation in the radial direction. The B-spline basis is locally supported and this ensures block diagonal matrix equations which are solved in O(N) steps. A very accurate highly resolved DNS of a turbulent jet flow is expected.

Rao, Ram Mohan↗
NASA NTRS1997

Large Scale Turbulent Structures in Supersonic Jets

Jet noise is a major concern in the design of commercial aircraft. Studies by various researchers suggest that aerodynamic noise is a major contributor to jet noise. Some of these studies indicate that most of the aerodynamic jet noise due to turbulent mixing occurs when there is a rapid variation in turbulent structure, i.e. rapidly growing or decaying vortices. The objective of this research was to simulate a compressible round jet to study the non-linear evolution of vortices and the resulting acoustic radiations. In particular, to understand the effect of turbulence structure on the noise. An ideal technique to study this problem is Direct Numerical Simulations (DNS), because it provides precise control on the initial and boundary conditions that lead to the turbulent structures studied. It also provides complete 3-dimensional time dependent data. Since the dynamics of a temporally evolving jet are not greatly different from those of a spatially evolving jet, a temporal jet problem was solved, using periodicity in the direction of the jet axis. This enables the application of Fourier spectral methods in the streamwise direction. Physically this means that turbulent structures in the jet are repeated in successive downstream cells instead of being gradually modified downstream into a jet plume. The DNS jet simulation helps us understand the various turbulent scales and mechanisms of turbulence generation in the evolution of a compressible round jet. These accurate flow solutions will be used in future research to estimate near-field acoustic radiation by computing the total outward flux across a surface and determine how it is related to the evolution of the turbulent solutions. Furthermore, these simulations allow us to investigate the sensitivity of acoustic radiations to inlet/boundary conditions, with possible appli(,a- tion to active noise suppression. In addition, the data generated can be used to compute, various turbulence quantities such as mean velocities, turbulent stresses, etc. which will aid in turbulence modeling. This report will be presented in two chapters. The first chapter describes some work on the linear stability of a supersonic round jet and the implications of this for the jet noise problem. The second chapter is an extensive discussion of numerical work using the spectral method which we use to solve the compressible Navier-Stokes equations to study turbulent jet flows. The method uses Fourier expansions in the azimuthal and streamwise direction and a 1-D B-spline basis representation in the radial direction. The B-spline basis is locally supported and this ensures block diagonal matrix equations which can be solved in O(N) steps. This is a modification of a boundary layer code developed by Robert Moser. A very accurate highly resolved DNS of a turbulent jet flow is produced.

Rao, Ram Mohan↗
NASA NTRS1997

Large Scale Turbulent Structures in Supersonic Jets

Jet noise is a major concern in the design of commercial aircraft. Studies by various researchers suggest that aerodynamic noise is a major contributor to jet noise. Some of these studies indicate that most of the aerodynamic jet noise due to turbulent mixing occurs when there is a rapid variation in turbulent structure, i.e. rapidly growing or decaying vortices. The objective of this research was to simulate a compressible round jet to study the non-linear evolution of vortices and the resulting acoustic radiations. In particular, to understand the effect of turbulence structure on the noise. An ideal technique to study this problem is Direct Numerical Simulations(DNS), because it provides precise control on the initial and boundary conditions that lead to the turbulent structures studied. It also provides complete 3-dimensional time dependent data. Since the dynamics of a temporally evolving jet are not greatly different from those, of a spatially evolving jet, a temporal jet problem was solved, using periodicity ill the direction of the jet axis. This enables the application of Fourier spectral methods in the streamwise direction. Physically this means that turbulent structures in the jet are repeated in successive downstream cells instead of being gradually modified downstream into a jet plume. The DNS jet simulation helps us understand the various turbulent scales and mechanisms of turbulence generation in the evolution of a compressible round jet. These accurate flow solutions will be used in future research to estimate near-field acoustic radiation by computing the total outward flux across a surface and determine how it is related to the evolution of the turbulent solutions. Furthermore, these simulations allow us to investigate the sensitivity of acoustic radiations to inlet/boundary conditions, with possible application to active noise suppression. In addition, the data generated can be used to compute various turbulence quantities such as mean velocities, turbulent stresses, etc. which will aid in turbulence modeling. This report will be presented in two chapters. The first chapter describes some work on the linear stability of a supersonic round jet and the implications of this for the jet noise problem. The second chapter is an extensive discussion of numerical work using the spectral method which we use to solve the compressible Navier-Stokes equations to study turbulent jet flows. The method uses Fourier expansions in the azimuthal and streamwise direction and a 1-D B-spline basis representation in the radial direction. The B-spline basis is locally supported and this ensures block diagonal matrix equations which can be solved in O(N) steps. This is a modification of a boundary layer code developed by Robert Moser. A very accurate highly resolved Direct Numerical Simulation (DNS) of a turbulent jet flow is produced.

Rao, Ram Mohan↗
NASA NTRS1997

Direct Numerical Simulation of Supersonic Turbulent Boundary Layers

The talk will present some initial results from the direct numerical simulation (DNS) of compressible turbulent boundary layers. We solve numerically the compressible Navier-Stokes equations using a method based on Spalart's transformation for the incompressible turbulent boundary layer. This allows the spatially developing boundary layer to be transformed to a calculation with periodic boundary conditions in the streamwise and spanwise directions. The equations are solved using Fourier expansions in the horizontal directions and B-splines in the wall-normal direction. The first simulation is at Mach 2.5 with a momentum thickness Reynolds number based on wall viscosity of R(sub theta(sup 1)) = 825. We are examining the physics of the compressible boundary layer using turbulence statistics and budget equations. The turbulence statistics include: rms (root mean square) and mean profiles, energy spectra, and two-point correlations. It is found that there are large density gradients which require significantly more resolution than the incompressible case.

Guarini, Stephen↗
NASA NTRS2015

Improved Discrete Ordinate Solutions in the Presence of an Anisotropically Reflecting Lower Boundary: Upgrades of the DISORT Computational Tool

A successor version 3 of DISORT (DISORT3) is presented with important upgrades that improve the accuracy, efficiency, and stability of the algorithm. Compared with version 2 (DISORT2 released in 2000) these upgrades include (a) a redesigned BRDF computation that improves both speed and accuracy, (b) a revised treatment of the single scattering correction, and (c) additional efficiency and stability upgrades for beam sources. In DISORT3 the BRDF computation is improved in the following three ways: (i) the Fourier decomposition is prepared "off-line", thus avoiding the repeated internal computations done in DISORT2; (ii) a large enough number of terms in the Fourier expansion of the BRDF is employed to guarantee accurate values of the expansion coefficients (default is 200 instead of 50 in DISORT2); (iii) in the post processing step the reflection of the direct attenuated beam from the lower boundary is included resulting in a more accurate single scattering correction. These improvements in the treatment of the BRDF have led to improved accuracy and a several-fold increase in speed. In addition, the stability of beam sources has been improved by removing a singularity occurring when the cosine of the incident beam angle is too close to the reciprocal of any of the eigenvalues. The efficiency for beam sources has been further improved from reducing by a factor of 2 (compared to DISORT2) the dimension of the linear system of equations that must be solved to obtain the particular solutions, and by replacing the LINPAK routines used in DISORT2 by LAPACK 3.5 in DISORT3. These beam source stability and efficiency upgrades bring enhanced stability and an additional 5-7% improvement in speed. Numerical results are provided to demonstrate and quantify the improvements in accuracy and efficiency of DISORT3 compared to DISORT2.

Lin, Z.↗
NASA NTRS2020

Spectral Spherical Harmonics Discrete Ordinate Method

A new method for modeling the radiative transfer in inhomogeneous three-dimensional media illuminated by a Gaussian beam is described. This approach, called the Spectral Spherical Harmonics Discrete Ordinate Method (SSHDOM), uses the Fourier expansion method to transform the three-dimensional radiative transfer into an one-dimensional equation in the spectral domain, and the Spherical Harmonics Discrete Ordinate Method (SHDOM) for its solution. Specifically, (i) the source function is represented in the spectral domain through a spherical harmonic expansion, (ii) the spectral one-dimensional radiative transfer equation is integrated along discrete ordinates through a spatial grid, and (iii) the solution method is based on the Picard iteration. Both SSHDOM and SHDOM algorithms are implemented in a common computer code.

Gaussian beam↗
NASA NTRS1987

Nonlinear diffusion in the solid phase

A Fourier series expansion method has been used to develop simple and relatively accurate solutions for nonlinear Fickian diffusion in the solid phase. For the fundamental harmonic, the first term in the Fourier expansion is qualitatively similar but quantitatively quite different from the conventional exponential function. In contrast, the Fourier coefficients of the higher order harmonics are combinations of fast-decay and slow-decay components. The simple analytical results agree well with numerical solutions for one sample calculation.

Tsang, Tung↗
NASA NTRS1977

Plasma oscillations and Landau damping

The Fourier-Hermite expansion is used to follow the time development of a non-analytic initial perturbation of the linearized Vlasov-Poisson system. The calculations differ from some previous applications of the Fourier-Hermite expansion in that they relax certain symmetry conditions on the distribution functions and in that many coefficients are required to describe the initial conditions. The results confirm Weitzner's prediction of the asymptotic t to the -3rd time dependence for this problem, and exhibit the way in which this behavior develops. An appendix outlines the way in which the initial conditions are expanded in Hermite functions.

Crownfield, F. R., Jr.↗
DOE OSTI2021

Fourier Neural Networks as Function Approximators and Differential Equation Solvers

We present a Fourier neural network (FNN) that can be mapped directly to the Fourier decomposition. The choice of activation and loss function yields results that replicate a Fourier series expansion closely while preserving a straightforward architecture with a single hidden layer. The simplicity of this network architecture facilitates the integration with any other higher-complexity networks, at a data pre- or postprocessing stage. We validate this FNN on naturally periodic smooth functions and on piecewise continuous periodic functions. We showcase the use of this FNN for modeling or solving partial differential equations with periodic boundary conditions. The main advantages of the current approach are the validity of the solution outside the training region, interpretability of the trained model, and simplicity of use.

Fourier decomposition↗
DOE OSTI2023

Quantum algorithm for the linear Vlasov equation with collisions

The Vlasov equation is a nonlinear partial differential equation that provides a first-principles description of the dynamics of plasmas. Its linear limit is routinely used in plasma physics to investigate plasma oscillations and stability. In this paper, we present a quantum algorithm that simulates the linearized Vlasov equation with and without collisions, in the one-dimensional electrostatic limit. Rather than solving this equation in its native spatial and velocity phase space, we adopt an efficient representation in the dual space yielded by a Fourier-Hermite expansion. For a given simulation time, the Fourier-Hermite representation is exponentially more compact, thus yielding a classical algorithm that can match the performance of a previously proposed quantum algorithm for this problem. Further, this representation results in a system of linear ordinary differential equations (ODEs) which can be solved with well-developed quantum algorithms: a Hamiltonian simulation in the collisionless case, and quantum ODE solvers in the collisional case. In particular, we demonstrate that a quadratic speedup in system size is attainable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1974

Derivation of transformation formulas between geocentric and geodetic coordinates for nonzero altitudes

Four formulas, for the nonzero altitude transformation from geodetic coordinates (geodetic latitude and altitude) to geocentric coordinates (geocentric latitude and geocentric distance) and vice versa, are derived. The set of four formulas is expressed in each of the three useful forms: series expansion in powers of the earth's flattening; series expansion in powers of the earth's eccentricity; and Fourier series expansion in terms of the geodetic latitude or the geocentric latitude. The error incurred in these series expansions is of the order of one part in 3 x 10 to the 7th power.

Long, S. A. T.↗
NASA NTRS1991

Characteristic eddy decomposition of turbulence in a channel

The proper orthogonal decomposition technique (Lumley's decomposition) is applied to the turbulent flow in a channel to extract coherent structures by decomposing the velocity field into characteristic eddies with random coefficients. In the homogeneous spatial directions, a generaliztion of the shot-noise expansion is used to determine the characteristic eddies. In this expansion, the Fourier coefficients of the characteristic eddy cannot be obtained from the second-order statistics. Three different techniques are used to determine the phases of these coefficients. They are based on: (1) the bispectrum, (2) a spatial compactness requirement, and (3) a functional continuity argument. Results from these three techniques are found to be similar in most respects. The implications of these techniques and the shot-noise expansion are discussed. The dominant eddy is found to contribute as much as 76 percent to the turbulent kinetic energy. In both 2D and 3D, the characteristic eddies consist of an ejection region straddled by streamwise vortices that leave the wall in the very short streamwise distance of about 100 wall units.

Moin, Parviz↗
NASA NTRS1991

A finite element conjugate gradient FFT method for scattering

Validated results are presented for the new 3D body of revolution finite element boundary integral code. A Fourier series expansion of the vector electric and mangnetic fields is employed to reduce the dimensionality of the system, and the exact boundary condition is employed to terminate the finite element mesh. The mesh termination boundary is chosen such that is leads to convolutional boundary operatores of low O(n) memory demand. Improvements of this code are discussed along with the proposed formulation for a full 3D implementation of the finite element boundary integral method in conjunction with a conjugate gradiant fast Fourier transformation (CGFFT) solution.

Collins, Jeffery D.↗
DOE OSTI2023

Toward extracting $$\gamma $$ from $$B\rightarrow DK$$ without binning

Abstract $$B^\pm \rightarrow DK^\pm $$ B ± → D K ± transitions are known to provide theoretically clean information about the CKM angle $$\gamma $$ γ , with the most precise available methods exploiting the cascade decay of the neutral D into CP self-conjugate states. Such analyses currently require binning in the D decay Dalitz plot, while a recently proposed method replaces this binning with the truncation of a Fourier series expansion. In this paper, we present a proof of principle of a novel alternative to these two methods, in which no approximations at the level of the data representation are required. In particular, our new strategy makes no assumptions about the amplitude and strong phase variation over the Dalitz plot. This comes at the cost of a degree of ambiguity in the choice of test statistic quantifying the compatibility of the data with a given value of $$\gamma $$ γ , with improved choices of test statistic yielding higher sensitivity. While our current proof-of-principle implementation does not demonstrate optimal sensitivity to $$\gamma $$ γ , its conceptually novel approach opens the door to new strategies for $$\gamma $$ γ extraction. More studies are required to see if these can be competitive with the existing methods.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1962

One-Dimensional Heat Conduction Through the Skin of a Vehicle upon Entering a Planetary Atmosphere at Constant Velocity and Entry Angle

Closed-form solutions of the one-dimensional heat-conduction equations for the flow of heat into a plate with a laminar boundary layer have been obtained for a configuration entering a planetary atmosphere with constant velocity and negative entry angle. The atmospheric density was assumed to obey an exponential law and the temperature was assumed constant initially. The solution is in the form of a Fourier series expansion which, for most practical applications, can be approximated by retaining only one term of the expression. The solution applies to the initial part of the entry before the maximum heating conditions are encountered.

SKIN TEMPERATURE↗