Search NASA⌕ Search

SEARCH · Search NASA

Results for “frequency shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Deviation-free Bragg cell frequency-shifting

A method is described of applying a variable frequency-shift to a laser beam, by means of Bragg cells, in which the direction of the output diffracted beam is unaffected by the magnitude of the applied shift. Applications of the technique to reference-beam and Doppler-difference forms of laser anemometry are discussed together with methods of obtaining increased dynamic range.

Abbiss, J. B.↗
DOE OSTI2021

New Fracture Diagnostic Tool for Unconventionals: High-Resolution Distributed Strain Sensing via Rayleigh Frequency Shift during Production in Hydraulic Fracture Test 2

Fiber Optic monitoring in unconventional reservoirs has proven to be an invaluable diagnostic tool for assessing both near-wellbore stimulation effectiveness and to help describe the far-field frac geometries created by hydraulic fracture stimulation. Unfortunately, gaining any detailed qualitative and quantitative understanding of the near-wellbore frac geometry or cluster/stage productivity during production via Fiber Optic (FO) has proven to be more difficult, particularly in wells producing liquids. A new FO diagnostic method, Distributed Strain Sensing based on Rayleigh Frequency Shift (DSS-RFS), first demonstrated for oil and gas applications in the Hydraulic Test Site 2 (HFTS2) provides new insights about the characteristics of near-wellbore-region (NWR) during production. DSS-RFS is different from other FO strain measurements because it relies on accurate measurement of frequency shifts of Rayleigh backscattered spectrum obtained by scanning the fiber with a coherent optical time-domain reflectometer with a range of laser frequencies using a tunable-wavelength laser system. Changes in strain are measured with an extremely high spatial resolution of 20 cm and with high signal-to-noise ratios over long distances. In HFTS2, strain changes for the entire wellbore have been measured twice during scheduled shut-in and reopening operations (February 2020 and September 2020). After removing temperature effects, consistent strain changes have been observed at the location of most perforation clusters. These are caused by near wellbore fracture aperture changes due to pressure increases during shut-in within the near-wellbore fracture network. The strain-change patterns from the DSS-RFS during shut-in correlate very well with the location of clusters and allow for the definition of extending intervals with positive strain signals at each cluster and slightly compressing intervals with negative strain signals between the clusters and in the non stimulated intervals. The locations of the measured positive strain peaks also show good correspondence to DAS acoustic intensity measurements acquired during the stimulation. The geometry and magnitude of the strain changes differ significantly between the two tested completion designs in the same well. During shut in and reopening each cluster exhibit its own strain-change / pressure path. In addition, the September 2020 dataset also revealed the existence of small but measurable strain changes as consequence of pressure decline during production. These strain changes also correlate well with the presence of producing clusters, but the strain-rate signals are opposite to that obtained during shut-in and reopening operations. Although Downloaded from http://onepetro.org/URTECONF/proceedings-pdf/21URTC/2-21URTC/D021S031R002/2477551/urtec-2021-5408-ms.pdf/1 by Carol Worster on 28 February 2022 URTeC 5408 2 we are still in the early stages of exploring the potential of this novel FO technique, we believe that the highly detailed information contained in the measurement of strain changes using DSS-RFS during production can significantly improve our understanding of near-wellbore hydraulic fracture characteristics and the relationships between stimulation and production from unconventional oil and gas wells.

04 OIL SHALES AND TAR SANDS↗
NASA NTRS1974

Relaxation and frequency shifts in the ground state of Rb-85

Results are presented on the relaxation and frequency shifts measured for the 0-0 transition of the ground state of Rb-85 at 3.03 GHz in various physical environments. These results include data on spin-exchange, buffer-gas, and wall interactions.

Vanier, J.↗
NASA NTRS1971

Ionospheric nf sub H resonances: Frequency shifts versus plasma conditions

The Alouette 2 resonances observed near the harmonics of the electron cyclotron frequency f sub H reveal frequency shifts (relative to the n(f sub H) values derived from model field calculations) which can be interpreted in terms of plasma wave dispersion effects. These effects are observed on the 2(f sub H) resonance when it is near the resonance observed close to the upper hybrid frequency f sub T. The observations suggest that an oblique echo model may be required to give a proper interpretation of the 2(f sub H) resonance. Cyclotron damping can be ignored only when the angle between the propagation vector and the direction perpendicular to the earth's magnetic field B is less than a few degrees for the 2(f sub H) wave, and less than a few tenths of a degree for the n(f sub H) waves with n 2. The negative offset of the absolute value of B inferred from the plasma resonance observations is consistent with expectations based on recent OGO 3 and OGO 5 rubidium magnetometer observations at higher altitudes in the equatorial regions.

Benson, R. F.↗
NASA NTRS2012

Frequency Shift During Mass Properties Testing Using Compound Pendulum Method

During mass properties testing on the X-48B Blended Wing Body aircraft (The Boeing Company, Chicago, Illinois) at the National Aeronautics and Space Administration Dryden Flight Research Center, Edwards, California, large inertia measurement errors were observed in results from compound pendulum swings when compared to analytical models. By comparing periods of oscillations as measured from an average over the test period versus the period of each oscillation, it was noticed that the frequency of oscillation was shifting significantly throughout the test. This phenomenon was only noticed during compound pendulum swings, and not during bifilar pendulum swings. The frequency shift was only visible upon extensive data analysis of the frequency for each oscillation, and did not appear in averaged frequency data over the test period. Multiple test articles, test techniques, and hardware setups were used in attempts to eliminate or identify the cause of the frequency shift. Plotting the frequency of oscillation revealed a region of minimal shift that corresponded to a larger amplitude range. This region of minimal shift provided the most accurate results compared to a known test article; however, the amplitudes that produce accurate inertia measurements are amplitudes larger than those generally accepted in mass properties testing. This paper examines two case studies of the frequency shift, using mass properties testing performed on a dummy test article, and on the X-48B Blended Wing Body aircraft.

Wolfe, David↗
DOE OSTI2022

Light-Induced Dynamic Frequency Shifting of Microwave Photons in a Superconducting Electro-Optic Converter

Hybrid superconducting-photonic microresonators are a promising platform for realizing microwave-to-optical transduction. However, the absorption of scattered photons by the superconductors leads to unintended microwave resonance-frequency variation and line-width broadening. Here, we experimentally study the dynamics of this effect and its impact on microwave-to-optics conversion in an integrated lithium niobate–superconductor hybrid-resonator platform. Here, we unveil an adiabatic frequency shifting of the intracavity microwave photons induced by the fast photoresponses of the thin-film superconducting resonator. As a result, the temporal and spectral responses of electro-optics transduction are modified and well described by our theoretical model. This work provides insights into the light-induced conversion dynamics that must be considered in future designs of hybrid superconducting-photonic system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1994

Vibration Test Force Limits Derived From Frequency Shift Method

The two-degree-of-freedom system (TDFS) method used to derive force specifications for force limited vibration tests at JPL is reviewed and some of the limitations of the method and of the simple TDFS model are discussed. A new improved frequency shift force prediction method is developed and applied to a more complex model where the load and source have both residual and modal masses.

force↗
NASA NTRS1986

Effects of fibril magnetic fields on solar p-modes. II - Calculation of mode frequency shifts

The effect of magnetic flux tubes in the solar convection zone on p-mode oscillations is investigated analytically using WKB ray theory, extending the results of Bogdan and Zweibel (1985) to the case of propagation not perpendicular to the tubes. Results for the frequency shift in polytropic slabs with vertical or horizontal flux tubes are presented in graphs and discussed.

Zweibel, E. G.↗