Search NASA⌕ Search

SEARCH · Search NASA

Results for “frequency-modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Probing the local surface potential and quantum capacitance in single and multi-layer graphene

We report on local measurements of the surface potential and quantum capacitance in single layer graphene as well as multilayers thereof as a function of the carrier density by using frequency-modulated Kelvin probe force microscopy. We find excellent agreement to tight-binding calculations reported for graphene monolayers and extract the minimum quantum capacitance from density sweeps at room temperature. The surface potential of graphene multilayers is found to depend linearly on the carrier density, which suggests treating them as two-dimensional electron gases. In addition, we demonstrate that the simultaneously detected second harmonic of the Kelvin modulation, proportional to |∂{sup 2}C/∂z{sup 2}|, is directly sensitive to local changes in the quantum capacitance of graphene.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2014

Performance and data analysis aspects of the new DIII-D monostatic profile reflectometer system

A new frequency-modulated profile reflectometer system, featuring a monostatic antenna geometry (using one microwave antenna for both launch and receive), has been installed on the DIII-D tokamak, providing a first experimental test of this measurement approach for profile reflectometry. Significant features of the new system are briefly described in this paper, including the new monostatic arrangement, use of overmoded, broadband transmission waveguide, and dual-polarization combination/demultiplexing. Updated data processing and analysis, and in-service performance aspects of the new monostatic profile reflectometer system are also presented. By using a raytracing code (GENRAY) to determine the approximate trajectory of the probe beam, the electron density (n{sub e}) profile can be successfully reconstructed with L-mode plasmas vertically shifted by more than 10 cm off the vessel midplane. Specifically, it is demonstrated that the new system has a capability to measure n{sub e} profiles with plasma vertical offsets of up to ±17 cm. Examples are also presented of accurate, high time and spatial resolution density profile measurements made over a wide range of DIII-D conditions, e.g., the measured temporal evolution of the density profile across a L-H transition.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

New methodology for measuring electron density perturbations caused by plasma coherent modes using profile reflectometry: Magnitudes and radial profiles in DIII-D

New capabilities of fast-sweep frequency-modulated profile reflectometry are explored to measure electron density ne perturbation magnitudes and radial profiles due to plasma coherent modes in DIII-D. The first approach is based on the frequency analysis of phase perturbations associated with high frequency (~MHz) Alfvén eigenmodes (AEs). The measurement of ~5.5 MHz fast-ion-driven global Alfvén eigenmodes (GAEs) is demonstrated in a neutral beam-heated DIII-D plasma. The GAE induced a broad radial distribution of phase perturbations in the profile reflectometer data. Analysis of these data determined the effective cutoff location displacement and the estimated ne fluctuation profile. In the second approach, high resolution ne profiles are used directly to determine the radial structure of ne perturbations due to a neo-classical tearing mode. These new measurements broaden the application of profile reflectometry and advance the development of AE spectroscopy as a tool for non-invasive diagnosis of fast-ion-driven modes in DIII-D and burning plasmas such as ITER.

47 OTHER INSTRUMENTATION↗
DOE OSTI2013

Deformation dynamics and spallation strength of aluminium under a single-pulse action of a femtosecond laser

An interferometric method is developed and realised using a frequency-modulated pulse for diagnosing a dynamics of fast deformations with a spatial and temporal resolution under the action of a single laser pulse. The dynamics of a free surface of a submicron-thick aluminium film is studied under an action of the ultrashort compression pulse with the amplitude of up to 14 GPa, excited by a femtosecond laser heating of the target surface layer. The spallation strength of aluminium was determined at a record high deformation rate of 3 Multiplication-Sign 10{sup 9} s{sup -1}. (extreme light fields and their applications)

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2013

Difference-frequency generation in the field of a few-cycle laser pulse propagating in a GaAs crystal with a domain structure

Difference-frequency generation in a GaAs crystal with a periodic domain structure in the field of a few-cycle laser pulse is considered for the case of weakly pronounced material dispersion. The straight-line method is used to solve numerically the system of coupled nonlinear partial differential equations describing the evolution of the electric field of this laser pulse in GaAs crystals with periodic and chirped domain structures. It is shown that application of a GaAs crystal with a chirped domain structure makes it possible to control the frequency-modulation law for a broadband differencefrequency pulse. (nonlinear optical phenomena)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

SRS generation of femtosecond pulses in a methane-filled revolver hollow-core optical fibre

The influence of the width of pump pulses (with λ{sub p} = 1.026 μm) on the SRS generation of femtosecond pulses in a methane-filled hollow-core fibre is investigated. The width of pump pulses is controlled by transmitting them through an optical dispersion-managed system and thus making them linear frequency-modulated (chirped). Regimes of both the preferred SRS generation of femtosecond pulses at the Stokes wavelength (λ{sub st} = 1.464 μm) and the generation of a multiband supercontinuum are experimentally demonstrated. A quantum efficiency of 41 % and a pulse width of 590 fs at the Stokes wavelength are obtained for the 1.026 → 1.464 nm Raman generation. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2013

LABORATORY CHARACTERIZATION AND ASTROPHYSICAL DETECTION OF VIBRATIONALLY EXCITED STATES OF ETHYL CYANIDE

Ethyl cyanide, CH{sub 3}CH{sub 2}CN, is an important interstellar molecule with a very dense rotational-vibrational spectrum. On the basis of new laboratory data in the range of 17-605 GHz and ab initio calculations, two new vibrational states, {nu}{sub 12} and {nu}{sub 20}, have been detected in molecular clouds of Orion. Laboratory data consist of Stark spectroscopy (17-110 GHz) and frequency-modulated spectrometers (GEM laboratory in Valladolid: 17-170, 270-360 GHz; Toyama: 26-200 GHz; Emory: 200-240 GHz; Ohio State: 258-368 GHz; and JPL: 270-318, 395-605 GHz). More than 700 distinct lines of each species were measured in J up to 71 and in K{sub a} up to 25. The states were fitted with Watson's S-reduction Hamiltonian. The two new states have been identified in the interstellar medium toward the Orion Nebula (Orion KL). The ground state, the isotopologues of CH{sub 3}CH{sub 2}CN, and the vibrationally excited states have been fitted to obtain column densities and to derive vibrational temperatures. All together, ethyl cyanide is responsible for more than 2000 lines in the observed frequency range of 80-280 GHz.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Electron density profile and associated fluctuation measurements using a microwave reflectometry diagnostic on Helically Symmetric eXperiment (HSX)

Abstract A dual-band frequency-modulated reflectometry is employed on the Helically Symmetric eXperiment (HSX) stellarator. This system equips a fast PIN switch to alternate the frequency source between two voltage-controlled oscillators, providing an operational frequency range from 14.5 GHz to 25.5 GHz. A monostatic antenna geometry and an ellipsoidal mirror are implemented in the vessel of HSX, where the polarization of the transmitted microwave can be switched between O- and X-mode to accommodate the magnetic field and plasma density. Although the original system was designed for density fluctuation measurement, significant efforts have been undertaken to improve the system performance and to realize the density profile inversion. Recent improvements of the system reported here include calibration of the dispersion in the transmission line, optimization of the waveform, and implementation of the Choi-Williams time–frequency distribution for spectral analysis. In this paper, we present the optimization of the reflectometry system along with first experimental measurements of the density profile and observations of fluctuations during gas puffing experiments.

Han, X. (ORCID:0000000184986433)↗
DOE OSTI2023

Angle-robust two-qubit gates in a linear ion crystal

In trapped-ion quantum computers, two-qubit entangling gates are generated by applying spin-dependent force which uses phonons to mediate interaction between the internal states of the ions. To maintain high-fidelity two-qubit gates under fluctuating experimental parameters, robust pulse-design methods are applied to remove the residual spin-motion entanglement in the presence of motional mode-frequency drifts. Here we propose an improved pulse-design method that also guarantees the robustness of the two-qubit rotation angle against uniform mode-frequency drifts by concatenating pulses with opposite sensitivity of the angle to mode-frequency drifts. Here we experimentally verify significantly improved robustness of the rotation angle against uniform mode-frequency drifts, as well as observe an improvement in gate fidelity from 97.84(10)% to 98.11(11)%, compared to a single frequency-modulated pulse.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2011

Broadband cavity electromagnetically induced transparency

Cavity electromagnetically induced transparency (EIT) is created in a three-level atomic system confined in a cavity and coupled to a free-space control laser and is manifested as a narrow transmission peak of a probe laser coupled into the cavity mode and tuned to the two-photon Raman resonance with the control laser. Cavity EIT can be observed with a control laser detuned from the atomic transition frequency in a range limited by the vacuum Rabi splitting of two cavity-atom normal modes. This leads to the broadband cavity EIT obtained in the coupled-cavity-atom system with a free-space, broadband control laser. We report an experimental observation of broadband cavity EIT in cold Rb atoms with a frequency-modulated control laser and discuss its application in multichannel and multifrequency light memory.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2015

Spectrum of quasistable states in a strong infrared field

The quasistability of highly excited H and He atoms in a strong infrared (IR) field is studied based on three-dimensional quantum calculations. The spectra of atoms that survive the IR field show a series of IR- frequency-modulated peaks that extend from deeply bound states all the way to the ionization threshold and above. Here, the atoms that survive mainly consist of highly excited Rydberg states, even after hundreds of the intense IR cycles. Also, they tend to have initial energies that allow emission or absorption of an integer number of IR photons to reach these quasistable states. Peaks above the ionization threshold in the survival spectra indicate the existence of multiphoton-assisted recombination in the intense IR field.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2019

Simulating noncontact atomic force microscopy images

A scanning probe with an atomically sharp tip is used in atomic force microscopy. As the probe is rastered over the specimen of interest, changes in its vibration mode can be ascribed to changes in the interatomic forces between the specimen and the tip. Various modes for implementing atomic force measures exist. One of the most successful modes is frequency-modulation noncontact atomic force microscopy. Here we address the role of replicating accurate forces on the probe tip to simulate images within this mode. In this work, we examine several approaches. One involves the use of classical force fields based on interatomic potentials, where the potentials are often fit to experiment. Other approaches center on the use of forces generated from quantum-based calculations. We consider the development of a “virtual tip” approximation wherein the probe tip senses electrostatic forces generated by the specimen. This approach treats the specimen quantum mechanically, while the tip is treated as a classical object. We also consider the use of an embedding approximation to avoid direct computations of the specimen in the presence of the tip. In this method, the tip and specimen are treated quantum mechanically. However, the electronic structure of the specimen is computed in the absence of the probe tip. The electronic density of the specimen is then fixed and the electronic structure of the tip is then computed in the presence of the fixed density. As a general approach, we outline new methods for the full computation of quantum forces between the tip and specimen. We note that quantum-based forces are particularly important as they directly contain the chemical nature of the forces present without the use of any adjustable parameters. We illustrate recent algorithmic developments to computing quantum forces that can produce accurate simulations of atomic force microscopy images for large and complex molecular species. We also suggest new pathways to overcome current challenges in this rapidly evolving field.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Evaluating the coherence and time-domain profile of quantum cascade laser frequency combs

Recently, much attention has been focused on the generation of optical frequency combs from quantum cascade lasers. We discuss how fast detectors can be used to demonstrate the mutual coherence of such combs, and present an inequality that can be used to quantitatively evaluate their performance. We discuss several technical issues related to shifted wave interference Fourier Transform spectroscopy (SWIFTS), and show how such measurements can be used to elucidate the time-domain properties of such combs, showing that they can possess signatures of both frequency-modulation and amplitude-modulation.

42 ENGINEERING↗
DOE OSTI2020

Recovery and Calibration of Legacy Underground Nuclear Test Seismic Data from the Leo Brady Seismic Network

The Leo Brady Seismic Network (LBSN, originally the Sandia Seismic Network) was established in 1960 by Sandia National Laboratories to monitor underground nuclear tests (UGTs) at the Nevada National Security Site (NNSS, formerly named the Nevada Test Site). The LBSN has been in various configurations throughout its existence, but it has generally been comprised of four to six stations at regional distances (~150–400 km) from the NNSS with approximately evenly spaced azimuthal coverage. Between 1962 and the end of nuclear testing in 1992, the LBSN—and a sister network operated by Lawrence Livermore National Laboratories—was the most comprehensive United States source of regional seismic data of UGTs. Approximately 75% of all UGTs performed by the United States occurred in the predigital era. At that time, LBSN data were transmitted as frequency-modulated (FM) audio over telephone lines to a central location and recorded as analog waveforms on high-fidelity magnetic audio tapes. These tapes have been in dry temperature-stable storage for decades and contain the sole record of this irreplaceable data; full waveforms of LBSN-recorded UGTs from this era were not routinely digitized or otherwise published. We have developed a process to recover and calibrate data from these tapes. First, we play back and digitize the tapes as audio. Next, we demodulate the FM “audio” into individual waveforms. We then estimate the various instrument constants through careful measurement of “weight-lift” tests performed prior to each UGT on each instrument. Finally, these coefficients allow us to scale and shape the derived instrument response of the seismographs and compute poles and zeros. Finally, the result of this process is a digital record of the recorded seismic ground motion in a modern data format, stored in a searchable database. To date, we have digitized tapes from 592 UGTs.

58 GEOSCIENCES↗
DOE OSTI2019

Recovery and calibration of legacy analog data from the Leo Brady Seismic Network for the Source Physics Experiment

The Leo Brady Seismic Network (LBSN) was established in 1960 by Sandia National Laboratories for monitoring underground nuclear tests (UGTs) at the Nevada Test Site— renamed in 2010 to the Nevada National Security Site (NNSS). The LBSN has been in various configurations throughout its existence, but it has been generally comprised of four to six stations at regional distances from the NNSS with evenly spaced azimuthal coverage. Between 1962 and the early 1980s, the LBSN—and a sister network operated by Lawrence Livermore National Laboratory—were the most comprehensive U.S. source of regional seismic data of UGTs. During the pre-digital era, LBSN data were transmitted as frequency-modulated (FM) audio over telephone lines to the NTS and recorded in analog on hi-fi 8-track AMPEX tapes. These tapes have been stored in temperature-stable buildings or bunkers on the NNSS and Kirtland Air Force Base in Albuquerque, NM for decades and contain the sole record of this irreplaceable data from the analog era; full waveforms of UGTs during this time were never routinely converted to digital form. We have been developing a process over the past few years to recover and calibrate data from these tapes, converting them from FM audio to digital waveforms in ground motion units. The calibration of legacy data from the LBSN is still ongoing. To date, we have digitized tapes from 592 separate UGTs. As a proof-of-concept, we calibrated data from the BOXCAR event.

58 GEOSCIENCES↗
DOE OSTI2022

Detecting the Presence of Intrusive Drilling in Secure Transport Containers Using Non-Contact Millimeter-Wave Radar

We employ a 77–81 GHz frequency-modulated continuous-wave (FMCW) millimeter-wave radar to sense anomalous vibrations during vehicle transport at highway speeds for the first time. Secure metallic containers can be breached during transport by means of drilling into their sidewalls but detecting a drilling signature is difficult because the large vibrations of transport drown out the small vibrations of drilling. For the first time, we demonstrate that it is possible to use a non-contact millimeter-wave radar sensor to detect this micron-scale intrusive drilling while highway-speed vehicle movement shakes the container. With the millimeter-wave radar monitoring the microdoppler signature of the container’s vibrating walls, we create a novel signal-processing pipeline consisting of range–angle tracking, time–frequency analysis, horizontal stripe image convolution, and principal component analysis to create a robust and powerful detection statistic to alarm if drilling is present. To support this pipeline, we develop a statistical model combining the vibrating container and the random vibrations induced by vehicle movement to explore the robustness of the sensor’s detection capabilities. The presented results strongly support the inclusion of a millimeter-wave radar vibration sensor into a transport security system.

Wagner, Samuel↗
DOE OSTI2017

Rotational Spectra in 29 Vibrationally Excited States of Interstellar Aminoacetonitrile

We report a detailed spectroscopic investigation of the interstellar aminoacetonitrile, a possible precursor molecule of glycine. Using a combination of Stark and frequency-modulation microwave and millimeter wave spectroscopies, we observed and analyzed the room-temperature rotational spectra of 29 excited states with energies up to 1000 cm{sup −1}. We also observed the {sup 13}C isotopologues in the ground vibrational state in natural abundance (1.1%). The extensive data set of more than 2000 new rotational transitions will support further identifications of aminoacetonitrile in the interstellar medium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗