Search NASA⌕ Search

SEARCH · Search NASA

Results for “fronts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Front-Surface Potential of Platinized p -InP Photocathodes Probed by Dual-Working-Electrode Measurements

The front-surface potential (E fr ) of p-InP/Pt photocathodes performing the hydrogen-evolution reaction has been probed under operating conditions using a dual-workingelectrode (DWE) method. The DWE data are consistent with expectations for proposed stability mechanisms for p-InP photocathodes. Specifically, E fr for Pt-modified p-InP adopts a value near the reversible hydrogen electrode (RHE) potential, consistent with kinetic suppression of metallic In 0 formation. The data provide a rapid, operando metric of interfacial catalyst activity, and indicate that E fr for the p-InP/Pt junction is governed by surface catalytic kinetics rather than by the applied back-contact potential (E b ).

Catalysts↗
DOE OSTI2025

Overview of the front-end electronics of CMS HGCal - including readout and powering

The end-cap calorimeters of CMS will be upgraded to a single High Granularity Calorimeter (HG-Cal) for the HL-LHC, including both silicon sensors and scintillator tiles with on-tile SiPMs as active elements. The readout of the active elements is performed by an ASIC (HGCROC in 130 nm CMOS technology) that measures the amplitude and arrival time of the signals. The amplitude is measured over a large dynamic range to allow calibration with single particles and the measurement of TeV showers. The time of arrival of high-energy showers will be measured with a precision of around 30 ps. A second pair of “concentrator” ASICs - ECON-T and ECON-D - takes the data from the HGCROC channels and packages them for transmission via optical links to the off-detector electronics. The ECON-T transmits trigger data at 40 MHz, to form part of the level-1 trigger. The ECON-D transmits concentrated data packets at up to 1 MHz, upon reception of a level-1 trigger signal. In addition to these ASICs, HGCal will use modified versions of common HL-LHC electronics developments, for the power chain and the optical control and readout. The dense nature of the HGCal provides additional challenges for the electronic boards and cabling. In this proceedings the overall HGCal front electronics scheme, including the latest performance of the HGCROC and ECON ASICs is presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Beyond leading twist: 𝜌 meson decay constants and distribution amplitudes in a self-consistent light-front quark model

In this study, we present a comprehensive analysis of decay constants and chiral-even and chiral-odd distribution amplitudes (DAs) up to twist 4 for the 𝜌 meson in the standard light-front quark model (LFQM) based on the Bakamjian-Thomas (BT) construction. For the 𝜌 meson, which possesses both longitudinal (ℎ=0) and transverse (ℎ =±1) polarizations, two types of decay constants, 𝑓$^{∥}_{𝜌}$ and 𝑓$^{⊥}_{𝜌}$, arises accordingly. We demonstrate that these decay constants can be self-consistently extracted from both local (𝑧𝜇 =0) and nonlocal (𝑧𝜇 ≠0) matrix elements ⟨0⁢|$\overline{𝑞}$(𝑧)⁢Γ⁢𝑞⁡(−𝑧)|⁢𝜌⁡(𝑃,ℎ)⟩, with Γ=(𝛾 𝜇 ,𝜎 𝜇⁢𝜈 ,𝛾 𝜇 ⁢𝛾 5 ,𝟏), in a manner independent of current components, polarizations, and reference frames. In particular, we emphasize the role of nonlocal matrix elements involving axial-vector and scalar currents, where mixing between 𝑓$^{∥}_{𝜌}$ and 𝑓$^{⊥}_{𝜌}$ occurs. We show that this mixing is consistently resolved through the BT construction, ensuring the proper extraction of these decay constants.

Electroweak interaction↗
DOE OSTI2024

Mixing effects on spectroscopy and partonic observables of heavy mesons with logarithmic confining potential in a light-front quark model

Using the variational principle, we systematically investigate the mass spectra and wave functions of both 1⁢𝑆 and 2⁢𝑆 state heavy pseudoscalar (𝑃) and vector (𝑉) mesons within the light-front quark model. This approach incorporates a Coulomb plus logarithmic confinement potential to accurately describe the constituent quark and antiquark dynamics. Additionally, spin hyperfine interactions are introduced perturbatively to compute the masses of pseudoscalar and vector mesons. The present analyses of the 1⁢𝑆 and 2⁢𝑆 states require the consideration of mixing between them to account for empirical constraints. These constraints include the mass gap Δ⁢𝑀 𝑃 >Δ⁢𝑀 𝑉 , where Δ⁢𝑀 𝑃⁡(𝑉) =𝑀$^{2⁢𝑆}_{𝑃⁡(𝑉)}$−𝑀$^{1⁢𝑆}_{𝑃⁡(𝑉)}$ and the hierarchy of the decay constants 𝑓 1⁢𝑆 >𝑓 2⁢𝑆 . We find the optimal value of the mixing angle to be 𝜃 =1⁢8°, significantly enhancing the consistency between our spectroscopic predictions and the experimental data compiled by the Particle Data Group. Furthermore, based on the predicted mass, the newly observed resonance 𝐵 𝐽⁡ (5840) could be assigned as a 2 1⁢ 𝑆 0 state in the 𝐵 meson family. The study also reports various pertinent observables, including twist-two distribution amplitudes, electromagnetic form factors, charge radii, 𝜉 moments, and transition form factors that are found to be consistent with both available lattice simulations and experimental data. In addition, our predicted branching ratios for the channels of 𝐵 + →𝜏 + ⁢𝜈 𝜏 as well as rare decays of 𝐵 0 and 𝐵$^0_𝑠$ appear in accordance with experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Efficient quantum simulation of QCD jets on the light front

Quark and gluon jets provide one of the best ways to probe the matter produced in ultrarelativistic high-energy collisions, from cold nuclear matter to hot quark-gluon plasma. In this work, we propose a unified framework for efficient quantum simulation of many-body dynamics using the ( 3 + 1 )-dimensional QCD Hamiltonian on the light front, particularly suited for studying the scattering of quark and gluon jets on nuclear matter in heavy-ion collisions. We describe scalable methods for mapping physical degrees of freedom onto qubits and for simulating in-medium jet evolution. We then validate our framework by implementing an algorithm that directly maps second-quantized Fock states onto qubits and uses Trotterized simulation for simulating time dynamics. Using a classical emulator, we investigate the evolution of quark and gluon jets with up to three particles in Fock states, extending prior studies. These calculations enable the study of key observables, including jet momentum broadening, particle production, and parton distribution functions. Published by the American Physical Society 2025

Qian, Wenyang (ORCID:0000000155250996)↗
DOE OSTI2024

Cryogenic Front-End ASICs for Low-Noise Readout of Charge Signals

This paper presents design details and measurement results of LArASIC, a front-end application specific integrated circuit (ASIC) designed for low-noise readout of charge signals generated in neutrino study experiments within liquid argon time projection chambers. LArASIC comprises of 16-channels of programmable charge amplification and pulse shaping stages that provide a voltage readout proportional to the input charge and was optimized for operation at liquid argon temperature, i.e., 89 K. The chip was fabricated in a 180 nm CMOS process. Measurements at liquid nitrogen temperature, i.e., 77 K, indicate that the channel outputs have high linearity (INL < 0.1%) within the operating range, an equivalent noise charge of 534 electrons for a peaking time of 1 µs and a detector capacitance of 150 pF, and a worst-case inter-channel cross-talk of 0.35%. The paper also presents design choices made in the process of migrating LArASIC to CHARMS, an ASIC to be fabricated in a 65 nm process that includes all features provided by LArASIC, along with additional digital programmability for improved robustness and flexibility. CHARMS is intended for use in future high-energy physics experiments that require high-resolution charge or light readout with shorter pulse peaking times.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Front-end Only Chatbot Interface

This code is a web-based front-end only (HTML, CSS, JS) chatbot interface for any OpenAI compatible text completion API.

Biggs, BrandonS.↗
DOE OSTI2024

Assessment of Technical Information Needs and Considerations for Front-End Activities for Molten Salt Fuel Types

This report details an assessment of the hazards and safety impacts related to front-end operations of molten salt reactors (MSR) as well as an assessment of existing safety guidance. Publicly available information was evaluated to make recommendations to the U.S. Nuclear Regulatory Commission (NRC) for guidance development and information gathering needs. Five different MSR technologies were evaluated along with information from 1960’s about the Atomic Energy Commission programs for the Aircraft Reactor Experiment and Molten Salt Reactor Experiment. Primary areas of evaluation include fuel cycle facilities, transportation and at reactor fuel mixing operations up to reactor startup. In general, there was difficulty synthesizing publicly available information due to the early stage of the MSR development and proprietary information associated with the reactor technology companies analyzed. There are a few specific recommendations from this report. One overarching paradigm shift that the NRC needs to evaluate is the possibility of collocating fuel cycle facilities with operating MSRs. Although there is no specific prohibition to this in the NRC regulations, the collocation of the fuel cycle facilities with the operating MSR presents a novel approach compared to the light water reactor baseline. More guidance and research into thorium operations and regulation is needed. The hazards associated with the stability of stored fuel constituents need to be evaluated. Some reactor fuel cycles use beryllium, and its use and the associated hazards need further analysis. NRC-approved designs for transportation packages for shipping molten salt fuels and factory-built and fueled reactors are not available.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Technical Information Needs and Regulatory Considerations for Front-End Transportation Activities of HALEU Fuel Feed Material

This report fulfills task order number 31310022F0033 Task 1 Assessment of technical information needs and considerations for front-end transportation activities for HALEU fuel feed material. This assessment primarily focuses on the transportation outlook and packaging requirements for transporting high-assay low-enriched uranium (HALEU) fuel feed material. The regulatory framework is described in section 3.0. In section 4.0 the specific issues associated with reviewing HALEU feed material packages are discussed. The rest of the report discusses the need for new packages and Department of Energy progress on HALEU production. Through this evaluation it is shown that the 5% enrichment barrier between low-enriched uranium and HALEU is a significant challenge to transportation packaging. However, there are licensed designs and concepts that can be used to transport HALEU feedstock. No significant issues were identified through the HALEU range up to 20% enriched.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Deer Park Energy Center Natural Gas Combined Cycle Carbon Capture System Front-End Engineering Design Study (Final Scientific/Technical Report – Unlimited)

Calpine Texas CCUS Holdings, LLC (Calpine), Shell Catalysts & Technologies (SCT), Technip Energies (TEN), and Sargent & Lundy, LLC (S&L) have conducted a Front-End Engineering Design (FEED) Study to integrate a new carbon capture system at Calpine’s Deer Park Energy Center (DKEC). The DKEC facility is a nominal 1200 MW gas-fired co-generation power plant situated at the Shell Chemical Manufacturing (Shell) Facility located in Deer Park, Texas. Steam is produced for use by the adjacent Shell Chemical Manufacturing Facility as well as by the onsite steam turbine for electrical generation. The power output from DKEC is provided to the Electric Reliability Council of Texas (ERCOT) operated power grid. DKEC provides power to industrial and commercial customers via this interconnection.

03 NATURAL GAS↗
DOE OSTI2024

Multiscale Dynamics of Reactive Fronts in the Subsurface

Understanding and predicting flow and reactive transport in rocks (i.e. geologic porous media) is critical to many technologies at the heart of the energy transition, including CO 2 sequestration and H2 storage. However, accurate modeling and prediction of these systems is very complex because physico-chemical processes that occur at very small spatial scales, i.e. in the pores of the rocks, can dramatically control the system performance at the field scale (km). For example, precipitation reactions at the pore-scale can lead to large permeability changes at the field scale and dramatically alter the migration of stored gases. Properly accounting for multi-scale coupling effects is critical to achieve predictivity and confidence in model outputs, which then can guide design and optimization at the system-scale. This can be achieved through the development of rigorous mathematical models that can appropriately account for fine-scale effects at the large scale. The final report of the Early Career award DE-SC0019075 “Multiscale dynamics of reactive fronts in the subsurface” summarizes the mathematical, numerical and experimental advancements to study and predict reactive transport in geologic porous media across scales.

58 GEOSCIENCES↗
DOE OSTI2025

Warm Front End Upgrade for the PIP-II Linac

The warm front end for the PIP-II Linac consists of an Ion-source, an RFQ, and four buncher cavities. The LLRF systems for these were the first ones developed more than a decade ago for use at the test stands. Some were VXI crate based, and others used early generation FPGA boards that are light in resources. These LLRF systems and the one for the first superconducting cryomodule, the HWR will be upgraded with the ARRIA 10 SOC-FPGA chassis with EPICS interfaces like the rest of the PIP-II Linac. The RFQ and the HWR have unique resonance control systems which are integrated into the LLRF controller hardware. The results of the initial testing with a cavity emulator will be presented.

Reyes, Lennon [Fermilab] (ORCID:0009000891155652)↗
DOE OSTI2026

Carbon Capture Plant Front-End Engineering Design Study for Cement Manufacturing

The objective of this project was to conduct a Front-End Engineering Design (FEED) study for capturing carbon dioxide (CO₂) from cement plant flue gas using non-aqueous solvents (NAS) with a 95% capture efficiency. The study aimed to develop AACE (Association for the Advancement of Cost Engineering) Class 3 cost estimates for a commercial-scale CO₂ capture system with a capacity of 2.4 million tonnes of CO₂ per year (t-CO₂/yr). The results will provide Cemex and the U.S. Department of Energy with reliable data to support investment decisions, evaluate economic feasibility, and guide future project development and implementation.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

28nm front end ASIC and 12” LGADs for 3D integration

The 3DIntSenS Collaboration—a joint effort between SLAC, Fermilab, and LLNL—is developing enabling technologies for next-generation radiation imaging detectors that combine ultra-fine spatial resolution (≈10 μm) with precision timing (<20 ps), while maintaining low power <1 W/cm2 and high data throughput. The approach leverages 3D integration between advanced CMOS readout ASICs and finely pixelated LGAD sensors to achieve the performance and scalability required for large-area, high-rate applications. High-granularity, precision-timing detectors are essential for scientific advances in HEP, NP, BES, and FES, but widespread adoption is limited by the cost and complexity of 3D integration. To close this gap, the collaboration is developing LGAD sensors compatible with 12-inch commercial CMOS processes, enabling cost-effective integration with high-performance ASICs under development. We present the design and results from a 28 nm CMOS ASIC prototype, including a low-jitter front end, and in-pixel TDC demonstrating sub-10 ps timing resolution. We also report on the co-design and characterization of reticle-scale LGAD sensors with 50 μm and 100 μm pixels and introduce the next 10k-pixel ASIC designed for full 3D integration. These advances represent a critical step toward scalable, high-resolution radiation imaging systems for future scientific instrumentation.

England, Troy [Fermilab] (ORCID:0000000154405255)↗