Search NASA⌕ Search

SEARCH · Search NASA

Results for “geophysical data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Vostok Subglacial Lake: A Review of Geophysical Data Regarding Its Discovery and Topographic Setting

Vostok Subglacial Lake is the largest and best known sub-ice lake in Antarctica. The establishment of its water depth (>500 m) led to an appreciation that such environments may be habitats for life and could contain ancient records of ice sheet change, which catalyzed plans for exploration and research. Here we discuss geophysical data used to identify the lake and the likely physical, chemical, and biological processes that occur in it. The lake is more than 250 km long and around 80 km wide in one place. It lies beneath 4.2 to 3.7 km of ice and exists because background levels of geothermal heating are sufficient to warm the ice base to the pressure melting value. Seismic and gravity measurements show the lake has two distinct basins. The Vostok ice core extracted >200 m of ice accreted from the lake to the ice sheet base. Analysis of this ice has given valuable insights into the lake s biological and chemical setting. The inclination of the ice-water interface leads to differential basal melting in the north versus freezing in the south, which excites circulation and potential mixing of the water. The exact nature of circulation depends on hydrochemical properties, which are not known at this stage. The age of the subglacial lake is likely to be as old as the ice sheet (approx.14 Ma). The age of the water within the lake will be related to the age of the ice melting into it and the level of mixing. Rough estimates put that combined age as approx.1 Ma.

Siegert, Martin J.↗

Investigation of Antarctic crust and upper mantle using Magsat and other geophysical data

The compatibility of Univac-formatted tapes with the in-house computer was investigated and a decision was made to switch to IBM-formatted tapes. A NASA software package was adapted for use with data when they become available. Auxiliary geophysical and geological data and literature continue to be compiled and studied so that when data tapes arrive, real analysis may begin.

Bentley, C. R.↗

Envision: An interactive system for the management and visualization of large geophysical data sets

Envision is a software project at the University of Illinois and Texas A&M, funded by NASA's Applied Information Systems Research Project. It provides researchers in the geophysical sciences convenient ways to manage, browse, and visualize large observed or model data sets. Envision integrates data management, analysis, and visualization of geophysical data in an interactive environment. It employs commonly used standards in data formats, operating systems, networking, and graphics. It also attempts, wherever possible, to integrate with existing scientific visualization and analysis software. Envision has an easy-to-use graphical interface, distributed process components, and an extensible design. It is a public domain package, freely available to the scientific community.

Searight, K. R.↗

A strategy for compression and analysis of massive geophysical data sets

This paper describes a method for summaraizing data in a way that approximately preserves high-resolution data structure while reducing data volume and maintaining global integrity of very large, remote sensing data sets. The method is under development for one of Terra's instruments, the Multi-angle Imaging SpectroRadiometer (MISR).

geophysical data sets compression↗

Deep learning to estimate permeability using geophysical data

Time-lapse electrical resistivity tomography (ERT) is a popular geophysical method to estimate three-dimensional (3D) permeability fields from electrical potential difference measurements. Traditional inversion and data assimilation methods are used to ingest this ERT data into hydrogeophysical models to estimate permeability. Due to ill-posedness and the curse of dimensionality, existing inversion strategies provide poor estimates and low resolution of the 3D permeability field. Recent advances in deep learning provide us with powerful algorithms to overcome this challenge. This paper presents a deep learning (DL) framework to estimate the 3D subsurface permeability from time-lapse ERT data. To test the feasibility of the proposed framework, we train DL-enabled inverse models on simulation data. Each measurement in both synthetic and field data is standardized by removing the mean and scaling the time-series to unit variance. This pre-processing step is necessary to bring simulation data closer to field observations. Subsurface process models based on hydrogeophysics are used to generate this synthetic data. Training performed on limited simulation data resulted in the DL model over-fitting. An advanced data augmentation based on mixup is implemented to generate additional training samples to overcome this issue. This mixup technique creates weakly labeled (low-fidelity) samples from strongly labeled (high-fidelity) data. The weakly labeled training data is then used to develop DL-enabled inverse models and reduce over-fitting. As both time-lapse ERT (1133048 features/realization) and 3D permeability (585453 features/realization) data samples are from a high-dimensional space, principal component analysis (PCA) is employed to reduce dimensionality. Encoded ERT and encoded permeability are generated using the trained PCA estimators. A deep neural network is then trained to map the encoded ERT to encoded permeability. This mixup training and unsupervised learning allowed us to build a fast and reasonably accurate DL-based inverse model under limited simulation data. Results show that proposed weak supervised learning can capture salient spatial features in the 3D permeability field. Quantitatively, the average mean squared error (in terms of the natural log) on the strongly labeled training, validation, and test datasets is less than 0.5. The R 2 -score (global metric) is greater than 0.75, and the percent error in each cell (local metric) is less than 10%. Finally, an added benefit in terms of computational cost is that the proposed DL-based inverse model is at least O(10 4 ) times faster than running a forward model once it is trained. Data generation, DL model training, and hyperparameter tuning to identify optimal neural network architectures utilized high-performance computing resources while the DL inference is performed on a standard laptop. Approximately, O(10 5 ) processor hours are used for generating data and DL tuning and training. We acknowledge that the data generation and DL model development are expensive. But once a DL model is trained, it can be re-used for inversion rapidly for the given system, with set physics and domain. Note that traditional inversion may require multiple forward model simulations (e.g., in the order of 10 to 1000), which are very expensive. This computational savings ≈ O(10 5 ) – O(10 7 )) makes the proposed DL-based inverse model attractive for subsurface imaging and real-time ERT monitoring applications due to fast and yet reasonably accurate estimations of permeability field.

58 GEOSCIENCES↗

Satellite Relaying of Geophysical Data

Data Collection Platforms (DCPs) for transmitting surface data to an orbiting satellite for relaying to a central data distribution center are being used in a number of geophysical applications. "Off-the-shelf" DCP's, transmitting through Landsat or GOES satellites, are fully capable of relaying data from low-data-rate instruments, such as tiltmeters or tide gauges. In cooperation with the Lamont-Doherty Geological Observatory, Goddard has successfully installed DCP systems on a tide gauge and tiltmeter array on Anegada, British Virgin Islands. Because of the high-data-rate requirements, a practical relay system capable of handling seismic information is not yet available. Such a system could become the basis of an operational hazard prediction system for reducing losses due to major natural catastrophies such as earthquakes, volcanic eruptions, landslides or tsunamis.

Allenby, R. J.↗

Imaging of a fluid injection process using geophysical data — A didactic example

In many subsurface industrial applications, fluids are injected into or withdrawn from a geologic formation. It is of practical interest to quantify precisely where, when, and by how much the injected fluid alters the state of the subsurface. Routine geophysical monitoring of such processes attempts to image the way that geophysical properties, such as seismic velocities or electrical conductivity, change through time and space and to then make qualitative inferences as to where the injected fluid has migrated. The more rigorous formulation of the time-lapse geophysical inverse problem forecasts how the subsurface evolves during the course of a fluid-injection application. Using time-lapse geophysical signals as the data to be matched, the model unknowns to be estimated are the multiphysics forward-modeling parameters controlling the fluid-injection process. Properly reproducing the geophysical signature of the flow process, subsequent simulations can predict the fluid migration and alteration in the subsurface. The dynamic nature of fluid-injection processes renders imaging problems more complex than conventional geophysical imaging for static targets. This work intents to clarify the related hydrogeophysical parameter estimation concepts.

58 GEOSCIENCES↗

Petrologic model of the northern Mississippi embayment based on satellite magnetic and ground based geophysical data

Magnetization, derived from gravity-seismic data from the northern Mississippi Embayment, is evaluated relative to magnetization values obtained from satellite magnetic data. A magnetization contrast of approximately -0.54 A/m determined from the geophysical model compares favorably to a value of approximately -0.47 A/m from MAGSAT United States Apparent Magnetization contrast map. The negative magnetization contrast, required by the MAGSAT data, is unusual as rift zones with the exception of those which are currently active are associated with positive magnetization. The model presented favors an intrusion of low Curie temperature mafic rock at the base of the crust. Alternate possibilities, a shallow Curie isotherm or remanence in a direction other than that of the current main field, seem less likely as reported regional heat flow values are too low and remanence is attenuated at depth.

Thomas, H. H.↗

An array processing system for lunar geochemical and geophysical data

A computerized array processing system has been developed to reduce, analyze, display, and correlate a large number of orbital and earth-based geochemical, geophysical, and geological measurements of the moon on a global scale. The system supports the activities of a consortium of about 30 lunar scientists involved in data synthesis studies. The system was modeled after standard digital image-processing techniques but differs in that processing is performed with floating point precision rather than integer precision. Because of flexibility in floating-point image processing, a series of techniques that are impossible or cumbersome in conventional integer processing were developed to perform optimum interpolation and smoothing of data. Recently color maps of about 25 lunar geophysical and geochemical variables have been generated.

Eliason, E. M.↗

Improved extraction of hydrologic information from geophysical data through coupled hydrogeophysical inversion

There is increasing interest in the use of multiple measurement types, including indirect (geophysical) methods, to constrain hydrologic interpretations. To date, most examples integrating geophysical measurements in hydrology have followed a three-step, uncoupled inverse approach. This approach begins with independent geophysical inversion to infer the spatial and/or temporal distribution of a geophysical property (e.g. electrical conductivity). The geophysical property is then converted to a hydrologic property (e.g. water content) through a petrophysical relation. The inferred hydrologic property is then used either independently or together with direct hydrologic observations to constrain a hydrologic inversion. We present an alternative approach, coupled inversion, which relies on direct coupling of hydrologic models and geophysical models during inversion. We compare the abilities of coupled and uncoupled inversion using a synthetic example where surface-based electrical conductivity surveys are used to monitor one-dimensional infiltration and redistribution.

54 ENVIRONMENTAL SCIENCES↗

Investigating Microtopographic and Soil Controls on a Mountainous Meadow Plant Community Using High-Resolution Remote Sensing and Surface Geophysical Data

Our study aims to explore the microtopographic controls that dictate the heterogeneity of plant communities in a mountainous floodplain-hillslope system, using remote sensing and surface geophysical techniques. Working within a lower montane floodplain-hillslope study site (750 m × 750 m) in the Upper Colorado River Basin, we developed a new data fusion framework, based on machine learning and feature engineering, that exploits remote sensing optical and light detection and ranging (LiDAR) data to estimate the distribution of key plant meadow communities at submeter resolution. We collected surface electrical resistivity tomography data to explore the variability in soil properties along a floodplain-hillslope transect at 0.50-m resolution and extracted LiDAR-derived metrics to model the rapid change in microtopography. Furthermore, we investigated the covariability among the estimated plant community distributions, soil information, and topographic metrics. Results show that our framework estimated the distribution of nine plant communities with higher accuracy (87% versus 80% overall; 85% versus 60% for shrubs) compared to conventional classification approaches. Analysis of the covariabilities reveals a strong correlation between plant community distribution, soil electric conductivity, and slope, indicating that soil moisture is a primary control on heterogeneous spatial distribution. At the same time, microtopography plays an important role in creating particular ecosystem niches for some of the communities. Such relationships could be exploited to provide information about the spatial variability of soil properties. This highly transferable framework can be employed within long-term monitoring to capture community-specific physiological responses to perturbations, offering the possibility of bridging local plot-scale observations with large landscape monitoring.

54 ENVIRONMENTAL SCIENCES↗

Aquifer recharge, depletion, and connectivity: Inferences from GRACE, land surface models, and geochemical and geophysical data

We used data from the Gravity Recovery and Climate Experiment (GRACE) and outputs of the CLM4.5 model to estimate recharge and depletion rates for large aquifers, investigate the connectivity of an aquifer's subbasins, and identify barriers and preferred pathways for groundwater flow within an aquifer system. The Nubian Sandstone Aquifer System and its subbasins (Dakhla, Northern Sudan Platform, and Kufra) in northeast Africa were used for demonstration purposes, and findings were tested and verified against geological, geophysical, remote sensing, geochronologic, and geochemical data. There are four major findings. (1) The average annual precipitation data over recharge areas in the southern Kufra section and the Northern Sudan Platform subbasin were estimated at 54.8 km 3 , and 32.8 km 3 , respectively, and knowing the annual extraction rates over these two areas (similar to 0.40 ± 0.20 km 3 ), recharge rates were estimated at 0.78 ± 0.49 km 3 /yr and 1.44 ± 0.42 km 3 /yr, respectively. (2) GRACEderived groundwater depletion rates over the Dakhla subbasin and the Northern Kufra section were estimated at 4.44 ± 0.42 km 3 /yr and 0.48 ± 0.32 km 3 /yr, respectively. (3) The observed depletion in the southern parts of the Dakhla subbasin is apparently caused by the presence of the east- west- trending Uweinat-Aswan basement uplift, which impedes the south-to-north groundwater flow and hence reduces replenishment from recharge areas in the south. (4) A major northeast- southwest- trending shear zone (Pelusium shear system) is apparently providing a preferred groundwater flow pathway from the Kufra to the Dakhla subbasin. Thus, inte-grated approach provides a replicable and cost-effective model for better understanding of the hydrogeologic setting of large aquifers worldwide and for optimum management of these groundwater resources.

58 GEOSCIENCES↗

Microwave spectrometer on the Nimbus 5 satellite - Meteorological and geophysical data

The Nimbus 5 microwave spectrometer has been used to measure thermal radiation in five frequency bands between 22.235 and 58.8 gigahertz, and has yielded both the temperature profile and, over ocean, the vapor and liquid water content of the terrestrial atmosphere, even in overcast conditions. Information has also been obtained on geophysical parameters that affect the surface emissivity, such as ice type, sea roughness, and snow cover. The experiment demonstrates the considerable potential of passive microwave sensing of meteorological and geophysical parameters.

Staelin, D. H.↗

Solar-geophysical data number 496, December 1985. Part 2: (Comprehensive reports). Data for June 1985, January-May 1985 and miscellanea

Contents include the detailed index for 1985; data for June 1985 (solar flares, solar radio bursts at fixed frequencies, solar X-ray radiation from GOES satellite graphs, mass ejections from the sun, and active prominences and filaments); data for January to May 1985 (solar flares January 1985, solar flares February 1985, solar flares March 1985, solar flares April 1985, solar flares May 1985, and number of flares August 1966 to June 1985); and the international geophysical calendar 1986.

Coffey, H. E.↗

CT and Geophysical Data of Clinton Sandstone Cores from Ohio

Collection of computed tomography and multi-sensor core logger data of 12 wells in Ohio that intersect the Clinton Sandstone formation. This data is described along with well information in a technical report series document: Paronish, T.; Holleran, A.; Pohl, M.; Crandall, D.; Jarvis, K.; Workman, S.; Drosche, J.; McKisic, T.; Collins, C.; Thomas, M.; McDonald, J. Computed Tomography Scanning and Geophysical Measurements of the Clinton Sandstone in Ohio; DOE.NETL-2025.4949; NETL Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory, Morgantown, WV, 2025; p 68. https://doi.org/10.2172/2589262

AS↗

Time-lapse Joint Inversion of Geophysical Data and its Applications to Geothermal Prospecting - GEODE

The objectives of this project were to develop new algorithms to decrease the cost of drilling for geothermal targets during the exploration phase of a hydrothermal field and to improve the monitoring of a geothermal field to better understand its plumbing system and keep the resource renewable. We developed both new software and algorithms for geothermal explorations (that can also be used in other areas of interest to the DOE) and we applied the methods to a geothermal field of interest to ORMAT in Nevada.

15 GEOTHERMAL ENERGY↗