SEARCH · Search NASA

Results for “heterogeneous formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Performance of Heterogeneous Sulfate Aerosol Formation Mechanisms Against Aircraft and Ground-Based Observations in Seoul, South Korea

Haze events are a common occurrence in East Asia, where local meteorology combines with anthropogenic emissions under certain conditions to create rapid increases in secondary aerosol. Often these events are driven by rapid production of secondary sulfate-nitrate-ammonium (SIA) aerosol. Models have typically included simple parameterizations of the production of sulfate during these events which vary widely in their magnitude. There are a range of different mechanistic descriptions of the chemical processes occurring during these events in large part due to poor constraints on aerosol pH and transition metal content, both of which are important to determining the key pathway(s) driving aerosol production. Here, we use the GEOS-Chem chemical transport model to interpret detailed ground and aircraft observations from May and June 2016 during the Korea-United States Air Quality (KORUS-AQ) field study to evaluate the mechanistic pathways governing sulfate production during a haze event. We apply our model of sulfate production mechanisms to ground-based speciated aerosol measurements in winter, summer, and fall in Seoul.

Katherine R Travis↗

DOE OSTI2024

Accelerating CO2 Storage Site Characterization through a New Understanding of Favorable Formation Properties and the Impact of Core-Scale Heterogeneities

CO2 sequestration in deep geologic formations can permanently reduce atmospheric CO2 emissions and help to abate climate change. Target formations must undergo a time- and resource-intensive site evaluation process, assessing storage capacity, environmental safety, and suitability for CO2 trapping via reactive transport models based on data from a limited number of core samples. As such, simulations are often simplified and omit heterogeneities in formation properties that may be significant but are not well understood. To facilitate more rapid site assessment, this work first defines the aquifer properties of favorable storage formations through the analysis of promising and active storage sites. Data show quartz is the most prevalent formation mineral with carbonate minerals, highly reactive with injected CO2, present in over 75% of formations. Porosity and permeability data are highly clustered at 10–30% and 10–1000 mD. Field-scale reactive transport simulations are then constructed and used to analyze CO2 trapping efficiency. The models consider porosity and carbonate mineral heterogeneity as well as the impacts of typical temperature gradients. Simulated sequestration efficiencies are compared to results from a comparable homogenous model to understand the implications of aquifer non-uniformities. The results show a lower sequestration efficiency in the homogeneous model during the injection phase. During the post-injection phase, the homogenization of porosity and carbonate mineralogy results in a higher sequestration efficiency. Incorporating the temperature gradient also increases the sequestration efficiency. Importantly, the maximum deviation between the homogeneous and heterogeneous simulations at the end of the 50-year study period is only ~10%. Larger impacts may be incurred for properties outside the defined, promising ranges suggested here.

Environmental Sciences & Ecology↗

DOE OSTI2022

Formation of a Strong Heterogeneous Aluminum Lewis Acid on Silica

Abstract Al(OC(CF 3 ) 3 )(PhF) reacts with silanols present on partially dehydroxylated silica to form well‐defined ≡SiOAl(OC(CF 3 ) 3 ) 2 (O(Si≡) 2 ) ( 1 ). 27 Al NMR and DFT calculations with a small cluster model to approximate the silica surface show that the aluminum in 1 adopts a distorted trigonal bipyramidal coordination geometry by coordinating to a nearby siloxane bridge and a fluorine from the alkoxide. Fluoride ion affinity (FIA) calculations follow experimental trends and show that 1 is a stronger Lewis acid than B(C 6 F 5 ) 3 and Al(OC(CF 3 ) 3 )(PhF) but is weaker than Al(OC(CF 3 ) 3 ) and i Pr 3 Si + . Cp 2 Zr(CH 3 ) 2 reacts with 1 to form [Cp 2 ZrCH 3 ][≡SiOAl(OC(CF 3 ) 3 ) 2 (CH 3 )] ( 3 ) by methide abstraction. This reactivity pattern is similar to reactions of organometallics with the proposed strong Lewis acid sites present on Al 2 O 3 .

Samudrala, Kavyasripriya K.↗

DOE OSTI2022

Formation of a Strong Heterogeneous Aluminum Lewis Acid on Silica

Samudrala, Kavyasripriya K.↗

NASA NTRS1979

Crystallization, flow and thermal histories of lunar and terrestrial compositions

Contents: a kinetic treatment of glass formation; effects of nucleating heterogeneities on glass formation; glass formation under continuous cooling conditions; crystallization statistics; kinetics of crystal nucleation; diffusion controlled crystal growth; crystallization of lunar compositions; crystallization between solidus and liquidus; crystallization on reheating a glass; temperature distributions during crystallization; crystallization of anorthite and anorthite-albite compositions; effect of oxidation state on viscosity; diffusive creep and viscous flow; high temperature flow behavior of glass-forming liquids, a free volume interpretation; viscous flow behavior of lunar compositions; thermal history of orange soil material; breccias formation by viscous sintering; viscous sintering; thermal histories of breccias; solute partitioning and thermal history of lunar rocks; heat flow in impact melts; and thermal histories of olivines.

Uhlmann, D. R.↗

DOE OSTI2022

How Does Land Cover and Its Heterogeneity Length Scales Affect the Formation of Summertime Shallow Cumulus Clouds in Observations From the US Southern Great Plains?

This study investigates the effects of heterogeneous land covers on shallow cumulus (ShCu) clouds at the US Southern Great Plains using high-resolution satellite and land cover data. During late summer, ShCu occurs over cities the most frequently and over open waters the least frequently, and more often over forest than over grassland. The preferential occurrence of ShCu over forest relative to grassland is consistent with surface measurements showing larger heat fluxes over forests. This preferential occurrence also varies with the length scales of land patches with the largest cloud occurrence difference shifting from smaller length scales (<9 km) during midday to larger scales (>9 km) in the early afternoon. Consistent with theory, these signals are more pronounced under low wind conditions. The preferential length scale shift with time suggests the existence of secondary circulations that strengthen and promote convergence over larger spatial scales as the differential land surface heating intensifies.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2018

Sedimentation Efficiency of Condensation Clouds in Substellar Atmospheres

Condensation clouds in substellar atmospheres have been widely inferred from spectra and photometric variability. Up until now, their horizontally averaged vertical distribution and mean particle size have been largely characterized using models, one of which is the eddy diffusion-sedimentation model from Ackerman and Marley that relies on a sedimentation efficiency parameter, f(sub sed), to determine the vertical extent of clouds in the atmosphere. However, the physical processes controlling the vertical structure of clouds in substellar atmospheres are not well understood. In this work, we derive trends in f(sub sed) across a large range of eddy diffusivities (K (sub zz) ), gravities, material properties, and cloud formation pathways by fitting cloud distributions calculated by a more detailed cloud microphysics model. We find that f(sub sed) is dependent on K (sub zz), but not gravity, when K (sub zz) is held constant. f(sub sed) is most sensitive to the nucleation rate of cloud particles, as determined by material properties like surface energy and molecular weight. High surface energy materials form fewer, larger cloud particles, leading to large f(sub sed) (>1), and vice versa for materials with low surface energy. For cloud formation via heterogeneous nucleation, f(sub sed) is sensitive to the condensation nuclei flux and radius, connecting cloud formation in substellar atmospheres to the objects' formation environments and other atmospheric aerosols. These insights could lead to improved cloud models that help us better understand substellar atmospheres. For example, we demonstrate that f(sub sed) could increase with increasing cloud base depth in an atmosphere, shedding light on the nature of the brown dwarf L/T transition.

brown dwarfs; planets and satellites: atmospheres↗

DOE OSTI2022

Intrinsic Halide Immiscibility in 2D Mixed-Halide Ruddlesden–Popper Perovskites

Halide alloying of 3D and 2D Ruddlesden–Popper lead halide perovskites (RPPs) allows their bandgaps to be fine-tuned for optoelectronic applications. Many studies of mixed-halide RPPs assume that halide mixing yields homogeneous alloys like in 3D lead halide perovskites, with halide segregation only occurring under perturbations like light or heat. Here we carefully investigate the mixed I/Br phases in solution grown microplates of three representative n = 1 and n = 2 RPP phases to reveal heterogeneous halide microscale domains – even in absence of photoinduced phase separation. Such halide immiscibility is revealed by X-ray diffraction and heterogeneity is confirmed by secondary ion mass spectrometry (SIMS) imaging, however, comparison with photoluminescence (PL) imaging results show how PL information alone can falsely imply homogeneous alloy formation in heterogeneous RPPs. Finally, we then demonstrate the use of spectral imaging as an alternative high-throughput tool for accurate halide phase characterization in mixed-halide RPPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

A new parameterization of ice heterogeneous nucleation coupled to aerosol chemistry in WRF-Chem model version 3.5.1: evaluation through ISDAC measurements

In the Arctic, during polar night and early spring, ice clouds are separated into two leading types of ice clouds (TICs): (1) TIC1 clouds characterized by a large concentration of very small crystals and TIC2 clouds characterized by a low concentration of large ice crystals. Using a suitable parameterization of heterogeneous ice nucleation is essential for properly representing ice clouds in meteorological and climate models and subsequently understanding their interactions with aerosols and radiation. Here, we describe a new parameterization for ice crystal formation by heterogeneous nucleation in water-subsaturated conditions coupled to aerosol chemistry in the Weather Research and Forecasting model coupled with chemistry (WRF-Chem). The parameterization is implemented in the Milbrandt and Yau (2005a, b) two-moment cloud microphysics scheme, and we assess how the WRF-Chem model responds to the run-time interaction between chemistry and the new parameterization. Well-documented reference cases provided us with in situ data from the spring 2008 Indirect and Semi-Direct Aerosol Campaign (ISDAC) over Alaska. Our analysis reveals that the new parameterization clearly improves the representation of the ice water content (IWC) in polluted or unpolluted air masses and shows the poor performance of the reference parameterization in representing ice clouds with low IWC. The new parameterization is able to represent TIC1 and TIC2 microphysical characteristics at the top of the clouds, where heterogenous ice nucleation is most likely occurring, even with the known bias of simulated aerosols by WRF-Chem over the Arctic.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Titanium and chromium isotopic compositions of calcium-aluminum-rich inclusions: Implications for the sources of isotopic anomalies and the formation of distinct isotopic reservoirs in the early Solar System

As the earliest-dated solids in our Solar System, calcium-aluminum-rich inclusions (CAIs) provide a record of their formation environment near the young Sun and hold clues to the formation of planetary-scale isotopic reservoirs in the solar protoplanetary disk. Although CAIs from several CV, CK, CM, CO, and ordinary chondrites have been analyzed previously for their Ti isotopic compositions, CAIs from just three CV chondrites have been analyzed for their Cr isotopic compositions, and only a handful of CAIs have been measured for both their Ti and Cr isotopic compositions. We report mass-independent Ti and Cr isotopic anomalies in several CAIs from CV and CK chondrites; this is the first report of the Cr isotopic composition of a CAI from a CK chondrite. With this data, we aim to better constrain the compositional range of CAIs in ε 50 Ti versus ε 54 Cr space, thereby facilitating the isotopic characterization of the material inherited by the solar protoplanetary disk and the role of CAIs in the formation of distinct planetary-scale isotopic reservoirs in our early Solar System. The narrow range in isotopic anomalies in CAIs when compared to other early-formed refractory inclusions such as platy hibonite crystals (PLACs) and spinel-hibonite inclusions (SHIBs) suggests that CAIs record the mixing of these precursor materials and the averaging of their larger isotopic anomalies. The isotopic composition of CAIs is therefore likely the result of a combination of factors, including mixing of material inherited from their formation region, heterogeneous carrier phase distribution, and thermal processing in the disk. The ε 50 Ti and ε 54 Cr isotopic compositions of CAIs are not correlated, further demonstrating that these isotopic anomalies have different carrier phases. The Ti and Cr isotopic compositions of CAIs additionally show that CAIs alone cannot be responsible for the compositional difference between the non-carbonaceous chondritic (NC) and carbonaceous chondritic (CC) isotopic reservoirs but nevertheless do play a role in the formation of these large-scale isotopic reservoirs in the early Solar System.

58 GEOSCIENCES↗

NASA NTRS1994

Effects of a polar stratosphere cloud parameterization on ozone depletion due to stratospheric aircraft in a two-dimensional model

A parameterization of Type 1 and 2 polar stratospheric cloud (PSC) formation is presented which is appropriate for use in two-dimensional (2-D) photochemical models of the stratosphere. The calculations of PSC frequency of occurrence and surface area density uses climatological temperature probability distributions obtained from National Meteorological Center data to avoid using zonal mean temperatures, which are not good predictors of PSC behavior. The parameterization does not attempt to model the microphysics of PSCs. The parameterization predicts changes in PSC formation and heterogeneous processing due to perturbations of stratospheric trace constituents. It is therefore useful in assessing the potential effects of a fleet of stratospheric aircraft (high speed civil transports, or HSCTs) on stratospheric composition. the model calculated frequency of PSC occurrence agrees well with a climatology based on stratospheric aerosol measurement (SAM) 2 observations. PSCs are predicted to occur in the tropics. Their vertical range is narrow, however, and their impact on model O3 fields is small. When PSC and sulfate aerosol heterogeneous processes are included in the model calculations, the O3 change for 1980 - 1990 is in substantially better agreement with the total ozone mapping spectrometer (TOMS)-derived O3 trend than otherwise. The overall changes in model O3 response to standard HSCT perturbation scenarios produced by the parameterization are small and tend to decrease the model sensitivity to the HSCT perturbation. However, in the southern hemisphere spring a significant increase in O3 sensitivity to HSCT perturbations is found. At this location and time, increased PSC formation leads to increased levels of active chlorine, which produce the O3 decreases.

Considine, David B.↗

DOE OSTI2023

Engineering the fracture resistance of 2H-transition metal dichalcogenides using vacancies: An in-silico investigation based on HRTEM images

Vacancy engineering of 2H-transition metal dichalcogenides (2H-TMDs) has recently attracted great attention due to its potential to fine-tune the phonon and opto-electric properties of these materials. From a mechanical perspective, this symmetry-breaking process typically reduces the overall crack resistance of the material and adversely affects its reliability. However, vacancies can trigger the formation of heterogeneous phases that synergistically improve fracture properties. In this study, using MoSe2 as an example, we characterize the types and density of vacancies that can emerge under electron irradiation and quantify their effect on fracture. Molecular dynamic (MD) simulations, employing a re-parameterized Tersoff potential capable of accurately capturing bond dissociation and structural phase changes, reveal that isolated transition metal monovacancies or chalcogenide divacancies tend to arrest the crack tip and hence enhance the monolayer toughness. In contrast, isolated chalcogenide monovacancies do not significantly affect toughness. The investigation further reveals that selenium vacancy lines, formed by high electron dose rates, alter the crack propagating direction and lead to multiple crack kinking. Using atomic displacements and virial stresses together with a continuum mapping, displacement, strain, and stress fields are computed to extract mechanistic information, e.g., conditions for crack kinking and size effects in fracture events. The study also reveals the potential of specific defect patterns, “vacancy engineering,” to improve the toughness of 2H-TMDs materials.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Experimental Determination of the Relationship Between Organic Aerosol Viscosity and Ice Nucleation at Upper Free Tropospheric Conditions

Abstract This work presents measurements of the ice nucleating ability of secondary organic material recorded between −40 and −70°C and relative humidity with respect to ice (RH ice ) between 150% and 220%. For a subset of systems, temperature and humidity dependence of particle viscosity as well as dry glass transition temperature were characterized using the dual tandem differential mobility analyzer method. Eleven unique monoterpene, sesquiterpene and aromatic precursors were used to generate secondary organic material (SOM) using either an oxidation flow reactor (OFR) or an environmental chamber (EC). For the SOM for which viscosity was measured, the particle glass transition temperatures varied between 6 and 23°C ( n = 8). Measurements were performed to verify that increased relative humidity did not plasticize the particles below −10°C at residence times similar to those in the ice nucleation instrument. No heterogeneous ice nucleation was observed at the ∼0.5% onset threshold for any of the materials generated. The ice nucleation occurs by the freezing of SOM solution droplets consistent with homogeneous freezing indicating that they form an aqueous solution, or the SOM particles required water saturation to freeze, indicating that they were hydrophobic. Experiments exploring the influence of functional groups and mass loading did not reveal any obvious influence of particle chemistry or generation conditions on the results. Close structural matches between known organic ice nucleating particles as precursor or formed products did not yield materials that promoted freezing. These experiments suggest that heterogeneous ice formation of glassy secondary organic materials is likely uncommon under upper free tropospheric conditions.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Deep Learning for Subsurface Flow: A Comparative Study of U‐Net, Fourier Neural Operators, and Transformers in Underground Hydrogen Storage

Subsurface flow research is essential for the sustainable management of natural resources and the environment. Deep learning (DL) has significantly advanced this field by developing efficient and accurate surrogate models to replace computationally expensive physics‐based simulations. These surrogate models are commonly used to predict the spatiotemporal evolution of state variables, such as gas saturation and reservoir pressure, in heterogeneous geological formations. Despite the various DL models applied to this task, there is a lack of studies systematically comparing their performance. This absence of comparative analysis leads to somewhat arbitrary DL model selection in subsurface flow research, resulting in suboptimal performance and potentially inaccurate predictions. To bridge this gap, we conduct a systematic comparison study of three popular DL architectures—U‐Net, Fourier Neural Operators (FNO), and Segmentation Transformer (SETR)—in surrogate modeling of underground hydrogen storage (UHS). We focus on UHS due to its promise of enhancing clean energy resilience and its cyclic operational conditions that represent common scenarios in various subsurface applications. We evaluate the models based on accuracy, training cost, and inference speed. The comparison shows that U‐Net achieves the highest accuracy, followed by SETR and FNO. Despite its lower accuracy, FNO has the highest inference speed. SETR offers competitive accuracy with the least training memory usage, demonstrating the potential of transformers in learning subsurface flow. Our results provide guidance for selecting DL models for surrogate modeling in a wide range of subsurface flow problems.

42 ENGINEERING↗

DOE OSTI2022

Chemical characterisation of degraded nuclear fuel analogues simulating the Fukushima Daiichi nuclear accident

The Fukushima Daiichi accident generated degraded nuclear fuel material, mixed with other reactor components, known as molten core-concrete interaction (MCCI) material. Simulant MCCI material was synthesised, excluding highly radioactive fission products, containing depleted U, and incorporating Ce as a surrogate for Pu. Multi-modal µ-focus X-ray analysis revealed the presence of the expected suite of U-Zr-O containing minerals, in addition to crystalline silicate phases CaSiO 3 , SiO 2 -cristobalite and Ce-bearing percleveite, (Ce,Nd) 2 Si 2 O 7 . The formation of perclevite resulted from reaction between the U-Zr-O-depleted Ce-Nd-O melt and the silicate (SiO 2 ) melt. It was determined that the majority of U was present as U 4 , whereas Ce was observed to be present as Ce 3+ , consistent with the highly reducing synthesis conditions. A range of Fe-containing phases characterised by different average oxidation states were identified, and it is hypothesised that their formation induced heterogeneity in the local oxygen potential, influencing the oxidation state of Ce.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Interactive Web Application for Traffic Simulation Data Management and Visualization

As traffic simulation software becomes more effective for realistically simulating and analyzing traffic dynamics and vehicle interactions on the mesoscopic and microscopic level, the management, dissemination, and collaborative visualization of traffic simulation results produced by individual transportation planners presents a significant challenge. Existing online content management systems have a very limited capability in allowing users to query specific traffic simulation scenarios and geospatially visualize simulation results through shareable and interactive web interfaces. This paper presents a web-based application for promoting the archiving, sharing, and visualization of large-scale traffic simulation outputs. The application is developed to enhance cyber-physical controls, communications, and public education for collaborative transportation planning. Unique features of the web application include: (a) allowing users to upload their new traffic simulation scenarios (parameters and outputs), as well as search existing scenarios using easily accessible interfaces; (b) optimizing simulation output files with heterogeneous data formats and projected coordinate systems for web-based storage and management using a scalable and searchable data/metadata standard; (c) standardizing user-uploaded simulation outputs using web interfaces and data processing libraries with parallel computing capacity; and (d) providing shareable web visual interfaces for visualizing the traffic flow and signal information stored in simulation outputs (e.g., regional traffic patterns and individual vehicle interactions) and visually comparing multiple simulation outputs both spatially and temporally. Furthermore, the paper presents the conceptual design and implementation of this application, and demonstrates the application’s performance for sharing, comparing, and visualizing simulation outputs from VISSIM and SUMO, two commonly used traffic simulation software programs.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

DOE OSTI2025

Characterization of Gramicidin A in Triblock and Diblock Polymersomes and Hybrid Vesicles via Continuous Wave Electron Paramagnetic Resonance Spectroscopy

Studying membrane proteins in a native environment is crucial to understanding their structural and/or functional studies. Often, widely accepted mimetic systems have limitations that prevent the study of some membrane proteins. Micelles, bicelles, and liposomes are common biomimetic systems but have problems with membrane compatibility, limited lipid composition, and heterogeneity. To overcome these limitations, polymersomes and hybrid vesicles have become popular alternatives. Polymersomes form from amphiphilic triblock or diblock copolymers and are considered more robust than liposomes. Hybrid vesicles are a combination of lipids and block copolymers that form vesicles composed of a mixture of the two. These hybrid vesicles are appealing because they have the native lipid environment of bilayers but also the stability and customizability of polymersomes. Gramicidin A was incorporated into these polymersomes and characterized using continuous wave electron paramagnetic resonance (CW-EPR) and transmission electron microscopy (TEM). EPR spectroscopy is a powerful biophysical technique used to study the structure and dynamic properties of membrane proteins in their native environment. Spectroscopic studies of gramicidin A have been limited to liposomes; in this study, the membrane peptide is studied in both polymersomes and hybrid vesicles using CW-EPR spectroscopy. Lineshape analysis of spin-labeled gramicidin A revealed linewidth broadening, suggesting that the thicker polymersome membranes restrict the motion of the spin label more when compared to liposome membranes. Statement of Significance: Understanding membrane proteins’ structures and functions is critical in the study of many diseases. In order to study them in a native environment, membrane mimetics must be developed that can be suitable for obtaining superior biophysical data quality to characterize structural dynamics while maintaining their native functions and structures. Many currently widely accepted methods have limitations, such as a loss of native structure and function, heterogeneous vesicle formation, restricted lipid types for the vesicle formation for many proteins, and experimental artifacts, which leaves rooms for the development of new biomembrane mimetics. The triblock and diblock polymersomes and hybrid versicles utilized in this study may overcome these limitations and provide the stability and customizability of polymersomes, keeping the biocompatibility and functionality of liposomes for EPR studies of membrane proteins.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1994

The global distribution of ozone destruction rates obtained from 13 years of Nimbus/TOMS data (1979-1991)

Long-term ozone trends (percentage change) have been computed from 13 years of Nimbus/TOMS (Total Ozone Mapping Spectrometer) data as a function of latitude, longitude, and month for the period January 1, 1979 to December 31, 1991. In both hemispheres, the ozone column content has decreased at latitudes above 30 deg by amounts that are larger than predicted by homogeneous chemistry models for the 13-year time period. The largest rates of ozone decrease occur in the Southern Hemisphere during winter and spring, with recovery during the summer and autumn. The large winter ozone loss rates are consistent with observed low stratospheric temperatures, ice-cloud formation, and heterogeneous chemistry at middle and high latitudes. There are similar, but smaller changes observed in the Northern Hemisphere. At midlatitudes, (40 deg N to 50 deg N) there are increased zonal average ozone depletion rates that correspond to 5 geographically localized regions of increased ozone depletion rates. Only the equatorial band between plus or minus 20 deg shows little or no long-term ozone change since January, 1979. The long-term winter ozone depletion rate data for both hemispheres suggests that heterogeneous chemistry processes may operate over a wide range of latitudes during half of the year.

Herman, Jay R.↗