Search NASA⌕ Search

SEARCH · Search NASA

Results for “heterogeneous formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Was core formation violent enough to homogenize the early mantle?

The dynamics of iron, its thermal state and its phase in the accreting Earth probably played a major role in the Earth's early thermal evolution. Plausible impact thermal histories make it possible that pure iron was molten in the accreting Earth after it was about 10% grown. Hence, iron eutectic alloys (FeS, FeO) certainly were. Additionally, the initial temperature of the core is an important constraint on the secular cooling of the early Earth and on the strength of the early geodynamo. Whether iron is solid or molten would influence geochemical equilibria in the upper and lower mantle; the mode of core formation, by spherical or near-spherical blobs, stalk-like instabilities, or something more catastrophic would influence the partitioning of siderophiles between silicate and iron phases. Early descent of iron (during accretion) favors partitioning according to low-pressure phase equilibria, whereas late descent favors higher pressure. The later core formation occurs, the greater the heat pulse, due to the strong dependence of gravitational potential energy on planetary radius. The heat may homogenize the mantle if core formation is global; otherwise, heterogeneity of iron differentiation may leave some of the pre-archean mantle unaffected. The larger the chunks of proto-core (and hence smaller surface/volume ratios) the greater the heterogeneity.

Cooperman, S. A.↗
NASA NTRS2011

Long-Term Evolution of the Aerosol Debris Cloud Produced by the 2009 Impact on Jupiter

We present a study of the long-term evolution of the cloud of aerosols produced in the atmosphere of Jupiter by the impact of an object on 19 July 2009. The work is based on images obtained during 5 months from the impact to 31 December 2009 taken in visible continuum wavelengths and from 20 July 2009 to 28 May 2010 taken in near-infrared deep hydrogen-methane absorption bands at 2.1-2.3 micron. The impact cloud expanded zonally from approximately 5000 km (July 19) to 225,000 km (29 October, about 180 deg in longitude), remaining meridionally localized within a latitude band from 53.5 deg S to 61.5 deg S planetographic latitude. During the first two months after its formation the site showed heterogeneous structure with 500-1000 km sized embedded spots. Later the reflectivity of the debris field became more homogeneous due to clump mergers. The cloud was mainly dispersed in longitude by the dominant zonal winds and their meridional shear, during the initial stages, localized motions may have been induced by thermal perturbation caused by the impact's energy deposition. The tracking of individual spots within the impact cloud shows that the westward jet at 56.5 deg S latitude increases its eastward velocity with altitude above the tropopause by 5- 10 m/s. The corresponding vertical wind shear is low, about 1 m/s per scale height in agreement with previous thermal wind estimations. We found evidence for discrete localized meridional motions with speeds of 1-2 m/s. Two numerical models are used to simulate the observed cloud dispersion. One is a pure advection of the aerosols by the winds and their shears. The other uses the EPIC code, a nonlinear calculation of the evolution of the potential vorticity field generated by a heat pulse that simulates the impact. Both models reproduce the observed global structure of the cloud and the dominant zonal dispersion of the aerosols, but not the details of the cloud morphology. The reflectivity of the impact cloud decreased exponentially with a characteristic timescale of 15 days; we can explain this behavior with a radiative transfer model of the cloud optical depth coupled to an advection model of the cloud dispersion by the wind shears. The expected sedimentation time in the stratosphere (altitude levels 5-100 mbar) for the small aerosol particles forming the cloud is 45-200 days, thus aerosols were removed vertically over the long term following their zonal dispersion. No evidence of the cloud was detected 10 months after the impact.

Sanchez-Lavega, A.↗
NASA NTRS2023

Flexible Data Fusion for Air Quality Estimation and Forecasting in Google Earth Engine to support Global Health Management Needs

The assessment and forecasting of air quality around the world at high spatial and temporal resolution can be enhanced by integrating data from multiple sources including models, satellites, regulatory monitors, and low-cost sensors. Such integration is subject to numerous technical challenges, however, including heterogeneous data resolution and formatting, different levels of data availability and reliability, and computational and capacity challenges to developing data fusion tools and platforms. This presentation will provide an overview of a NASA-funded effort to develop a data fusion system within the Google Earth Engine platform which integrates these air quality data sources to produce comprehensive assessments and forecasts of key air pollutants at sub-daily and sub-city scales. The system is being developed in collaboration with city- and regional-level air quality managers, and will provide them with information to the assess and anticipate the health impacts of poor air quality, track local changes in air quality due to ongoing transportation and land use changes, and identify potential gaps in their current air quality monitoring strategies. The presentation will report advances achieved through the project, including bringing local air quality monitoring data into Google Earth Engine, quantifying uncertainties in air quality estimates and forecasts, and tailored communications tools providing integration into end-user processes to meet their needs.

Carl Malings↗
NASA NTRSDate not supplied

Flexible Data Fusion for Air Quality Estimation and Forecasting in Google Earth Engine to support Global Health Management Needs

The assessment and forecasting of air quality around the world at high spatial and temporal resolution can be enhanced by integrating data from multiple sources including models, satellites, regulatory monitors, and low-cost sensors. Such integration is subject to numerous technical challenges, however, including heterogeneous data resolution and formatting, different levels of data availability and reliability, and computational and capacity challenges to developing data fusion tools and platforms. This presentation will provide an overview of a NASA-funded effort to develop a data fusion system within the Google Earth Engine platform which integrates these air quality data sources to produce comprehensive assessments and forecasts of key air pollutants at sub-daily and sub-city scales. The system is being developed in collaboration with city- and regional-level air quality managers and will provide them with information to the assess and anticipate the health impacts of poor air quality, track local changes in air quality due to ongoing transportation and land use changes, and identify potential gaps in their current air quality monitoring strategies. The presentation will report advances achieved through the project, including bringing local air quality monitoring data into Google Earth Engine, quantifying uncertainties in air quality estimates and forecasts, and tailored communications tools providing integration into end-user processes to meet their needs.

Nathan R. Pavlovic↗
NASA NTRS2017

Oxychlorine Species in Gale Crater and Broader Implications for Mars

Of 15 samples analyzed to date, the Sample Analysis at Mars (SAM) instrument on the Mars Science Laboratory (MSL) has detected oxychlorine compounds (perchlorate or chlorate) in 12 samples. The presence of oxychlorine species is inferred from the release of oxygen at temperatures less than 600degC and HCl between 350-850degC when a sample is heated to 850degC. The O2 release temperature varies with sample, likely caused by different cations, grain size differences, or catalytic effects of other minerals. In the oxychlorine-containing samples, perchlorate abundances range from 0.06 +/- 0.03 to 1.15 +/- 0.5 wt% Cl2O7 equivalent. Comparing these results to the elemental Cl concentration measured by the Alpha Particle X-ray Spectrometer (APXS) instrument, oxychlorine species account for 5-40% of the total Cl present. The variation in oxychlorine abundance has implications for their production and preservation over time. For example, the John Klein (JK) and Cumberland (CB) samples were acquired within a few meters of each other and CB contained approximately1.2 wt% Cl2O7 equivalent while JK had approximately 0.1 wt%. One difference between the two samples is that JK has a large number of veins visible in the drill hole wall, indicating more post-deposition alteration and removal. Finally, despite Cl concentrations similar to previous samples, the last three Murray formation samples (Oudam, Marimba, and Quela) had no detectable oxygen released during pyrolysis. This could be a result of oxygen reacting with other species in the sample during pyrolysis. Lab work has shown this is likely to have occurred in SAM but it is unlikely to have consumed all the O2 released. Another explanation is that the Cl is present as chlorides, which is consistent with data from the ChemCam (Chemical Camera) and CheMin (Chemistry and Mineralogy) instruments on MSL. For example, the Quela sample has approximately1 wt% elemental Cl detected by APXS, had no detectable O2 released, and halite (NaCl) has been tentatively identified in CheMin X-ray diffraction data. These data show that oxychlorines are likely globally distributed on Mars but the distribution is heterogenous depending on the perchlorate formation mechanism (production rate), burial, and subsequent diagenesis

Ming, Douglas W.↗
NASA NTRS2009

Impact of Land Surface Heterogeneity on Mesoscale Atmospheric Dispersion

Prior numerical modelling studies show that atmospheric dispersion is sensitive to surface heterogeneities, but past studies do not consider the impact of a realistic distribution of surface heterogeneities on mesoscale atmospheric dispersion. While these focussed on dispersion in the convective boundary layer, the present work also considers dispersion in the nocturnal boundary layer and above. Using a Lagrangian particle dispersion model (LPDM) coupled to the Eulerian Regional Atmospheric Modeling System (RAMS), the impact of topographic, vegetation, and soil moisture heterogeneities on daytime and nighttime atmospheric dispersion is examined. In addition, the sensitivity to the use of Moderate Resolution Imaging Spectroradiometer (MODIS)-derived spatial distributions of vegetation characteristics on atmospheric dispersion is also studied. The impact of vegetation and terrain heterogeneities on atmospheric dispersion is strongly modulated by soil moisture, with the nature of dispersion switching from non-Gaussian to near- Gaussian behaviour for wetter soils (fraction of saturation soil moisture content exceeding 40%). For drier soil moisture conditions, vegetation heterogeneity produces differential heating and the formation of mesoscale circulation patterns that are primarily responsible for non-Gaussian dispersion patterns. Nighttime dispersion is very sensitive to topographic, vegetation, soil moisture, and soil type heterogeneity and is distinctly non-Gaussian for heterogeneous land-surface conditions. Sensitivity studies show that soil type and vegetation heterogeneities have the most dramatic impact on atmospheric dispersion. To provide more skillful dispersion calculations, we recommend the utilisation of satellite-derived vegetation characteristics coupled with data assimilation techniques that constrain soil-vegetation-atmosphere transfer (SVAT) models to generate realistic spatial distributions of surface energy fluxes.

Wu, Yuling↗
NASA NTRS1981

Lead isotopic studies of the Samail ophiolite, Oman

The isotopic composition of Pb and the concentrations of U, Th, and Pb are determined for samples from massive sulfides and lithologic units of the Samail ophiolite. It is shown that the magma that formed the ophiolite was probably derived from a depleted mantle, similar in Pb isotopic composition to the source area of mid-ocean ridge basalt. The gross geochemical characteristics of the mantle sources have remained almost unchanged for the last 100 million years. It is also shown that the U-Th-Pb systematics of the Samail formation indicate that local vertical heterogeneity in the oceanic crust can result from crystal fractionation and metasomatism at, and near, an oceanic spreading center.

Chen, J. H.↗
NASA NTRS1991

Version 0 EOSDIS - An overview

Attention is given to NASA's Earth Observing System Data and Information System (EOSDIS), which is to be a single, distributed but internally consistent evolutionary system to support the planning and execution of EOS data acquisitions and to process, archive, and distribute EOS data products and selected non-EOS data to enable interdisciplinary studies of the earth. V0 EOSDIS, a logical step in this evolutionary process, is to address both technical and managerial challenges. Technical challenges include developing a multidiscipline, distributed system for searching and ordering data in a heterogeneous environment, and standardizing data formats and distribution techniques among differing communities and organizations. Managerial challenges include establishing and maintaining a structure consisting of geographically distributed entities such that cooperative development is carried out effectively despite organizational differences, maintaining interactions with the scientific community to ensure its close involvement despite its size and diversity, and keeping the expectations for V0 consistent with its schedules and resources.

Ramapriyan, H. K.↗
NASA NTRS1999

A Review of Spatial and Seasonal Changes in Condensation Clouds Observed During Aerobraking by MGS TES

Successful operation of the Mars Global Surveyor spacecraft beginning in September 1997, has permitted extensive infrared observations of condensation clouds during the martian southern summer and fall seasons (184 deg<L(sub s)<28 deg). Initially, thin (normal optical depth<0.06 at 825/cm) ice clouds and hazes were widespread, showing a latitudinal gradient. With the onset of a regional dust storm at L(sub s) = 224 deg, ice clouds essentially vanished in the southern hemisphere, to reappear gradually after the decay of the storm. The thickest clouds (optical depth approximately 0.6) were associated with major volcanic features. At L(sub s) =318 deg, the cloud at Ascraeus Mons was observed to disappear between 21:30 and 09:30, consistent with historically recorded diurnal behavior for clouds of this type. Limb observations showed extended optically thin (depth<0.04) stratiform clouds at altitudes up to 55 km. A water ice haze was present in the north polar night at altitudes up to 40 km; this probably provided heterogeneous nucleation sites for the formation of CO2 clouds at altitudes below the 1 mbar pressure level, where atmospheric temperatures dropped to the condensation point Of CO2.

Pearl, J. C.↗
NASA NTRS1999

A Review of Spatial and Seasonal Changes in Condensation Clouds Observed During Aerobraking by MGS TES

Successful operation of the Mars Global Surveyor spacecraft, beginning in September 1997, has permitted extensive infrared observations of condensation clouds during the martian southern summer and fall seasons (184 deg less than L(sub s) less than 28 deg). Initially, thin (normal optical depth less than 0.06 at 825/ cm) ice clouds and hazes were widespread, showing a latitudinal gradient. With the onset of a regional dust storm at L(sub s) = 224 deg, ice clouds essentially vanished in the southern hemisphere, to reappear gradually after the decay of the storm. The thickest clouds (optical depth approx. 0.6) were associated with major volcanic features. At L(exp s) = 318 deg, the cloud at Ascraeus Mons was observed to disappear between 21:30 and 09:30, consistent with historically recorded diurnal behavior for clouds of this type. Limb observations showed extended optically thin (depth less than 0.04) stratiform clouds at altitudes up to 55 km. A water ice haze was present in the north polar night at altitudes up to 40 km; this probably provided heterogeneous nucleation sites for the formation of CO2 clouds at altitudes below the 1 mbar pressure level, where atmospheric temperatures dropped to the condensation point of CO2.

Pearl, J. C.↗
NASA NTRS2001

Science Desk: General Overview

This viewgraph presentation discusses information sharing and other management procedures between related groups of scientists. ScienceOrganizer is an information repository and digital library for use by distributed scientific project teams which enables the storage and retrieval of heterogeneous project information in multiple formats. Over time, usage by persons results in the development of an increasingly information-rich knowledge base and network. Some of the engineering details include the determination of useful navigation hubs by which users can most easily navigate the information management system.

Keller, Richard M.↗
NASA NTRS2001

Investigating Type I Polar Stratospheric Cloud Formation Mechanisms with POAM Satellite Observations

Type Ia PSCs are believed to be composed of nitric acid hydrate particles. Recent results from the SOLVE/THESEO 2000 campaign showed evidence that this type of PSC was composed of a small number of very large particles capable of sedimentary denitrification of regions of the stratosphere. It is unknown whether homogeneous or heterogeneous nucleation is responsible for the formation of these PSCs. Arctic winters are tending to be colder in response to global tropospheric warming. The degree to which this influences ozone depletion will depend on the freezing mechanism of nitric acid hydrate particles. If nucleation is homogeneous it implies that the freezing process is an inherent property of the particle, while heterogeneous freezing means that the extent of PSCs will depend in part on the number of nuclei available. The Polar Ozone and Aerosol Measurement (POAM)II and III satellites have been making observations of stratospheric aerosols and Polar Stratospheric Clouds (PSCs) since 1994. Recently, we have developed a technique that can discriminate between Type Ia and Ib PSCs using these observations. A statistical approach is employed to demonstrate the robustness of this approach and results are compared with lidar measurements. The technique is used to analyze observations from POAM II and II during Northern Hemisphere winters where significant PSC formation occurred with the objective of exploring Type I PSC formation mechanisms. The different PSCs identified using this method exhibit different growth curve as expressed as extinction versus temperature.

Strawa, Anthony W.↗
NASA NTRS1983

Glass formation - A contemporary view

The process of glass formation is discussed from several perspectives. Particular attention is directed to kinetic treatments of glass formation and to the question of how fast a given liquid must be cooled in order to form a glass. Specific consideration is paid to the calculation of critical cooling rates for glass formation, to the effects of nucleating heterogeneities and transients in nucleation on the critical cooling rates, to crystallization on reheating a glass, to the experimental determination of nucleation rates and barriers to crystal nucleation, and to the characteristics of materials which are most conducive to glass formation.

Uhlmann, D. R.↗
NASA NTRS1994

Heterogeneous Chemistry Important in the Polar Stratosphere

Aircraft emissions have been thought to enhance the formation of polar stratospheric clouds in the Arctic winter, and therefore heterogeneous reactions on the surfaces of these clouds may accelerate the polar ozone depletion.

polar stratosphere heterogeneous chemistry ozone d↗
NASA NTRS1986

Dynamic crystallization of chondrule melts of porphyritic and radial pyroxene composition

Dynamic crystallization experiments in which heterogeneous nucleation is an important variable have been completed on four melts of chondrule composition. Compositions were chosen to best represent chondrules with porphyritic pyroxene and radial pyroxene textures. Experimental results show that heterogeneous nucleation is essential for the formation of porphyritic textures. Without preexisting nuclei, too much supercooling is established before crystallization is initiated and the textures are more likely to be dendritic or radial. In the near total absence of nuclei, radial textures can form at cooling rates as slow as 5 C/hr in this study. By varying the heterogeneous nucleation conditions and having a melt in which the appropriate phases are stable or metastable, analogs to most of the recognized chondrule textures can be produced in a single melt composition.

Lofgren, G.↗
NASA NTRS1993

An overview of the cosmic dust analogue material production in reduced gravity: the STARDUST experience

The formation, properties and chemical dynamics of microparticles are important in a wide variety of technical and scientific fields including synthesis of semiconductor crystals from the vapour, heterogeneous chemistry in the stratosphere and the formation of cosmic dust surrounding the stars. Gravitational effects on particle formation from vapors include gas convection and buoyancy and particle sedimentation. These processes can be significantly reduced by studying condensation and agglomeration of particles in microgravity. In addition, to accurately simulate particle formation near stars, which takes place under low gravity conditions, studies in microgravity are desired. We report here the STARDUST experience, a recent collaborative effort that brings together a successful American program of microgravity experiments on particle formation aboard NASA KC-135 Reduced Gravity Research Aircraft and several Italian research groups with expertise in microgravity research and astrophysical dust formation. The program goal is to study the formation and properties of high temperature particles and gases that are of interest in astrophysics and planetary science. To do so we are developing techniques that are generally applicable to study particle formation and properties, taking advantage of the microgravity environment to allow accurate control of system parameters.

NASA Discipline Exobiology↗
NASA NTRSDate not supplied

The Nucleosynthetic Heritage of Bennu

The OSIRIS-REx mission sampled the B-type asteroid Bennu and delivered 121.6 g of material to Earth in September 2023. Nucleosynthetic isotope variations are powerful tracers that can be used to establish relationships between different meteorite groups and the returned samples. They can also constrain the samples’ nucleosynthetic heritage, as well as mixing and reservoir formation in the protoplanetary disk. Nucleosynthetic variations reflect the heterogeneous distribution of isotopically distinct dust in the disk, and as such, they provide evidence for the formation of meteorite parent bodies from isotopically distinct dust reservoirs. They are thus also a means to identify exogenous clasts in Bennu materials. Here, we report Ti and Fe isotope data obtained from Bennu samples and carbonaceous chondrites. We also present Ti isotope data for hand-picked matrix from CV and CR chondrites. An isotopic dataset was obtained on aggregate sample OREX-803015-100 consisting of particles typically <500 μm; therefore, its composition represents an average for Bennu materials. A 20.66 mg aliquot was dissolved at Washington University, St. Louis. From this, 5 mg was analysed for Ti and Fe isotopes on a NeptunePlus MC-ICPMS at ETH Zurich; data from a separate aliquot, analysed at Lawrence Livermore National Laboratory, are reported in a companion abstract. Our results demonstrate a close relationship of Bennu to CI and Ryugu samples and therefore a formation outside the snowline, as hypothesized by the mission. Furthermore, the 50 Ti data from the CV and CR matrix fall consistently below the CI and Bennu values, indicating the presence of a uniform matrix mixed with ⁓0.1–0.7% of refractory inclusions in CIs and Bennu.

M. Schönbächler↗
NASA NTRS1995

Supporting technology for the development of Controlled Ecological Life Support Systems (CELSS)

To support the development of Controlled Ecological Life Support Systems (CELSS) in the space program, a metabolic simulator has been selected for use in a closed chamber to test functions of the CELSS. This metabolic simulator is a catalytic reactor which oxidizes the methyl acetate to produce carbon dioxide and water vapor. In this project, kinetic studies of catalytic oxidation of methyl acetate were conducted using monolithic and pellet catalysts with 0.5% (by weight) platinum (Pt) on aluminum oxide (Al2O3). The reaction was studied at a pressure of one atmosphere and at temperatures varying from 160 C to 420 C. By-products were identified at the exit of the preheater and reactor. For the kinetic study with the monolithic catalyst, a linear regression method was used to correlate the kinetic data with zero-order, first-order and Langmuir-Hinshelwood models. Results indicate that the first-order model represents the data adequately at low concentrations of methyl acetate. For higher concentrations of methyl acetate, the Langmuir-Hinshelwood model best represents the kinetic data. Both rate constant and adsorption equilibrium constants were estimated from the regression. A Taguchi orthogonal array (L(sub 9)) was used to investigate the effects of temperature, flow rate, and concentration on the catalytic oxidation of methyl acetate. For the monolithic catalyst, temperature exerts the most significant effect, followed by concentration of methyl acetate. For the pellet catalyst, reaction temperature is the most significant factor, followed by gas flow rate and methyl acetate concentration. Concentrations of either carbon dioxide or oxygen were seen to have insignificant effect on the methyl acetate conversion process. Experimental results indicate that the preheater with glass beads can accomplish thermal cracking and catalytic reaction of methyl acetate to produce acetic acid, methanol, methyl formate, and 1-propanol. The concentration of all by-products was measured in ppmv (parts per million by volume). At higher temperatures, greater amounts of these products are produced, as expected. In all cases, methanol was the predominant concentration detected, followed by methyl formate. At temperatures lower than 320 C for the P-type monolithic catalyst, methanol, acetic acid, and acetone were detected, whereas, for the E-type monolithic catalyst, only methanol was detected at 160 C. Both P and E types of the monolithic catalyst were specified with the same substrates (ceramic), washcoat (Al2O3), and promoter (Pt). However, the manufacturing and treatment procedures were quite different. It was therefore concluded that the performance of the E-type monolithic catalyst is superior to that of the P-type for oxidation of methyl acetate. At higher reaction temperatures, e.g., above 420 C, all reactants and byproducts were completely oxidized using these two types of monolithic catalyst to produce carbon dioxide and water vapor. A complex heterogenous catalytic reaction mechanism was proposed to explain the formation of the byproducts (methanol, acetic acid, and methyl formate) as the methyl acetate traveled through the preheater packed with glass beads. The by-product, 1-propanol, may be formed only through a homogeneous reaction, since it is difficult to develop a reasonable sequence of heterogeneous reaction steps to explain its formation. The homogeneous thermal decomposition of methyl acetate to form free radicals was proposed to explain the formation of 1-propanol, and also methanol, in the preheater. A dual-site catalytic reaction mechanism was proposed for the oxidation of methyl acetate over Pt/Al2O3 monolithic catalyst. The dual-site mechanism describes the chemisorption of oxygen molecules as well as a physical adsorption of methyl acetate on the active sites. On the active sites, methyl acetate is oxidized rapidly to form carbon dioxide and water vapor. A rate equation derived from this mechanism gives the Langmuir-Hinshelwood rate formula which has been observed from the experimental data obtained in this project for high methyl acetate concentration (greater than 1000 ppmv) over a monolithic catalyst. If the oxygen concentration is very high and methyl acetate concentration is very low, the reaction rate equation is then reduced to a first-order with respect to methyl acetate concentration. The first-order model has also been observed from the experimental data obtained in this project for low methyl acetate concentration (less than 1000 ppmv).

Li, Ku-Yen↗