Search NASA⌕ Search

SEARCH · Search NASA

Results for “high enthalpy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Mass spectrometric gas composition measurements associated with jet interaction tests in a high-enthalpy wind tunnel

Knowledge of test gas composition is important in wind-tunnel experiments measuring aerothermodynamic interactions. This paper describes measurements made by sampling the top of the test section during runs of the Langley 7-Inch High-Temperature Tunnel. The tests were conducted to determine the mixing of gas injected from a flat-plate model into a combustion-heated hypervelocity test stream and to monitor the CO2 produced in the combustion. The Mass Spectrometric (MS) measurements yield the mole fraction of N2 or He and CO2 reaching the sample inlets. The data obtained for several tunnel run conditions are related to the pressures measured in the tunnel test section and at the MS ionizer inlet. The apparent distributions of injected gas species and tunnel gas (CO2) are discussed relative to the sampling techniques. The measurements provided significant real-time data for the distribution of injected gases in the test section. The jet N2 diffused readily from the test stream, but the jet He was mostly entrained. The amounts of CO2 and Ar diffusing upward in the test section for several run conditions indicated the variability of the combustion-gas test-stream composition.

Lewis, B. W.↗
NASA NTRS1991

Mach 4 and Mach 8 axisymmetric nozzles for a high-enthalpy shock tunnel

The performance of two axisymmetric nozzles which were designed to produce uniform, parallel flow with nominal Mach numbers of 4 and 8 is examined. A free-piston-driven shock tube was used to supply the nozzle with high-temperature, high-pressure test gas. The inviscid design procedure treated the nozzle expansion in two stages. Close to the nozzle throat, the nozzle wall was specified as conical and the gas flow was treated as a quasi-one-dimensional chemically-reacting flow. At the end of the conical expansion, the gas was assumed to be calorically perfect, and a contoured wall was designed (using method of characteristics) to convert the source flow into a uniform and parallel flow at the end of the nozzle. Performance was assessed by measuring Pitot pressures across the exit plane of the nozzles and, over the range of operating conditions examined, the nozzles produced satisfactory test flows. However, there were flow disturbances in the Mach 8 nozzle flow that persisted for significant times after flow initiation.

Jacobs, P. A.↗
NASA NTRS1985

Experimental and analytical derivation of arc-heater scaling laws for simulating high-enthalpy environments for Aeroassisted Orbital Transfer Vehicle application

The computer code ARCFLO II was used as a guide to increase the performance of the Interaction Heating Facility at Ames Research Center. A closed-form scaling law relation was derived that provides an understanding of the factors that affect enthalpy in the constricted-arc heater. From a study of this scaling law, it is concluded that at constant pressure, enthalpy is proportional to current density raised to the 0.60 power for current densities from 80 to 150 A/sq cm. At constant current density, enthalpy is inversely proportional to pressure to the nth power, where n varies from 0.14 to 0.43, depending on the current density. Radiative heat losses are responsible for the falloff in performance at combinations of high current density and high pressure. An analytical, closed form scaling law based on a constant-temperature arc-core model agrees qualitatively with the scaling law deduced from ARCFLO II.

Winovich, W.↗
NASA NTRS1983

Developing mass spectrometric techniques for boundary layer measurement in hypersonic high enthalpy test facilities

Thermodynamic flow properties of gases in the boundary layer or the flowfield have been mainly deduced from pressures and temperatures measured on a model. However, further progress with respect to an understanding of these properties requires a more complete characterization of the layer including determination of the gas composition and chemistry. Most attempts to measure boundary layer chemistry involve the employment of a mass spectrometer and an associated gas sampling system. The three major limiting factors which must be addressed for species measurement in aerothermodynamic investigations on models at reentry stream velocities, are gas sampling effects, instrument limitations, and problems with data acquisition. The present investigation is concerned with a concentrated effort to quantitatively identify and correct for instrument and sampling system effects, and to develop a miniaturized high performance mass spectrometer for on-model real-time analysis of the boundary layer and its associated atmosphere.

Wood, G. M., Jr.↗
DOE OSTI2026

Boundary-layer receptivity to oblique freestream vorticity waves for a high-enthalpy hypersonic flow

The receptivity of a Mach 15 straight-cone boundary layer to oblique freestream vorticity waves is investigated using direct numerical simulation (DNS) alongside linear stability theory and the linear parabolized stability equations. A thermochemical nonequilibrium gas model is used. Oblique freestream vorticity waves at frequencies of 400, 800, and 1200 kHz are considered, with incident angles ranging from 0° to 29.4° at 400 kHz, 0° to 15.7° at 800 kHz, and 0° to 20.6° at 1200 kHz. The 400 kHz case is of primary interest due to the strong second-mode amplification at this frequency. Although the underlying base flow is axisymmetric, the oblique vorticity waves lead to a fully three-dimensional boundary-layer disturbance whose characteristics vary depending on the azimuthal ray relative to the freestream wave. Moving downstream within the second-mode instability region, some clear trends emerge in terms of the boundary-layer disturbance amplitudes; that is, disturbance amplitudes are highest at the leeward ray (relative to the freestream wave), but weakest about halfway between the windward and leeward rays. Increasing the incident angle causes the amplitudes to increase on the leeward ray and decrease on the windward ray. Moreover, the boundary-layer disturbance throughout contains a wide spectrum of azimuthal wavenumbers in which the disturbance energy falls off at higher wavenumbers. Increasing the incident angle causes the azimuthal spectrum of the boundary-layer disturbance to broaden overall. Qualitatively similar results are found for the two higher frequencies leading up to the peak-amplitude locations corresponding to the second-mode instability.

42 ENGINEERING↗
DOE OSTI2024

A Novel Standard Gibbs Energy of Formation Model for High-Enthalpy Water Systems

This work provides an advanced standard molar Gibbs energy of formation model, informed by molecular statistical thermodynamics (MST), and validated by mineral solubility and ion association reactions. This new model aligns with experimental data within uncertainties and highlights the role of specific MST interactions around the critical point. This work will provide a reliable tool for the optimization of industrial processes operating at the edges of the supercritical domain.

Hall, Derek↗
NASA NTRS1988

Downward-deployed tethered platforms for high enthalpy aerothermodynamic research

The data on aerothermodynamic and aerodynamic interactions at altitudes above 50 km is extremely limited because of the relative inaccessibility of the region to research vehicles of any sort. This paper addresses the practicability of using downward deployed satellites tethered to an orbiting host vehicle in order to obtain steady-state data in the upper reaches of the region above 80 or 90 km.

Wood, George M.↗
NASA NTRS1988

Heat transfer measurements on biconics at incidence in hypersonic high enthalpy air and nitrogen flows

Heat transfer rate measurements have been obtained at 0, 5, 15, and 21 deg angles-of-attack for a straight biconic scale model of an aeroassisted orbital vehicle proposed for planetary probe missions. Heat-transfer distributions were measured using palladium thin-film resistance gauges deposited on a glass-ceramic substrate. The windward heat transfer correlations were based on equilibrium flow in the shock layer of the model, although the flow may depart from equilibrium in the flow-field.

Gai, S. L.↗
NASA NTRS1991

High enthalpy, hypervelocity flows of air and argon in an expansion tube

An expansion tube with a free piston driver has been used to generate quasi-steady hypersonic flows in argon and air at flow velocities in excess of 9 km/s. Irregular test flow unsteadiness has limited the performance of previous expansion tubes, and it has been found that this can be avoided by attention to the interaction between the test gas accelerating expansion and the contact surface in the primary shock tube. Test section measurements of pitot pressure, static pressure and flat plate heat transfer are reported. An approximate analytical theory has been developed for predicting the velocities achieved in the unsteady expansion of the ionizing or dissociating test gas.

Neely, A. J↗