Search NASA⌕ Search

SEARCH · Search NASA

Results for “high-density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

EOS image data processing system definition study

The Image Processing System (IPS) requirements and configuration are defined for NASA-sponsored advanced technology Earth Observatory System (EOS). The scope included investigation and definition of IPS operational, functional, and product requirements considering overall system constraints and interfaces (sensor, etc.) The scope also included investigation of the technical feasibility and definition of a point design reflecting system requirements. The design phase required a survey of present and projected technology related to general and special-purpose processors, high-density digital tape recorders, and image recorders.

Gilbert, J.↗
NASA NTRS1974

Reusable Agena study. Volume 1: Executive summary

The shuttle Agena upper stage interim tug concept is based on a building block approach. These building block concepts are extensions of existing ascent Agena configurations. Several current improvements, have been used in developing the shuttle/Agena upper stage concepts. High-density acid is used as the Agena upper stage oxidizer. The baffled injector is used in the main engine. The DF-224 is a fourth generation computer currently in development and will be flight proven in the near future. The Agena upper stage building block concept uses the current Agena as a baseline, adds an 8.5-inch (21.6 cm) extension to the fuel tank for optimum mixture ratio, uses monomethyl hydrazine as fuel, exchanges a 150:1 nozzle extension for the existing 45:1, exchanges an Autonetics DF-224 for the existing Honeywell computer, and adds a star sensor for guidance update. These modifications to the current Agena provide a 5-foot (1.52m) diameter shuttle/Agena upper stage that will fly all Vandenberg Air Force Base missions in the reusable mode without resorting to a kick motor. The delta V velocity of the Agena is increased by use of a strap-on propellant tank option. This option provides a shuttle/Agena upper stage with the capability to place almost 3900 pounds (1769 kg) into geosynchronous orbit (24 hour period) without the aid of kick motors.

Source record↗
NASA NTRS1974

Experimental evaluation of compliant surfaces at low speeds

An experimental study was devised to determine the profile drag on a subsonic wind tunnel model partially covered with various compliant surface materials. The model consisted of a large section of constant thickness bounded fore and aft by symmetric airfoil fairings. A flat rigid plate, the control surface, could be exchanged for four contiguous complaint panels. The flexible media generally consisted of thin polyvinylchloride membranes stretched to various tensions over trapped fluid cavities of air, water, or polyethelene oxide solution, or over dry or flooded open-celled polyurethane foams. On the basis of very accurate direct-force cell measurements, all configurations were found to yield profile drags equal to or slightly higher than that obtained for the conventional rigid surface case. The results indicate that the potential for practical drag-reducing applications will be limited to either high-density or high-speed flows where more sensible pressure perturbations occur.

Mcalister, K. W.↗
NASA NTRS1974

Conduction in fully ionized liquid metals

Electron transport is considered in high-density fully ionized liquid metals. Ionic structure is described in terms of hard-sphere-correlation functions and the scattering is determined from self-consistently screened point ions. Applications to the physical properties of the deep interior of Jupiter are briefly considered.

Stevenson, D. J.↗
NASA NTRS1974

On the steady flow of gas from the nuclei of Seyfert galaxies

Heating of gas energy released during explosive events produces hot winds in Seyfert nuclei. Steady-state solutions indicate that supersonic velocities up to about 800 km per sec are obtainable. Lyman continuum radiation emitted by the wind ionizes and maintains temperature of cooler gas clouds seen in emission, and dominates energy losses during early stages of expansion. A study of stability of the thermal equilibrium state leads to a two-component model: a hot stable phase (the wind), in pressure equilibrium with a cooler stable phase (clouds). Extreme variations in cloud electron densities are a consequence of the steep decrease with radius of external pressure. Cloud dynamics are related to the radius of formation and internal parameters. Permitted lines of H are emitted by high-density clouds formed at the base of the wind, while forbidden lines arise in radially moving clouds, produced throughout the wind.

Wolfe, A. M.↗
NASA NTRS1974

New design and operating techniques for improved terminal area compatibility

Current aircraft operating problems that must be alleviated for future high-density terminal areas are safety, dependence on weather, congestion, energy conservation, noise, and atmospheric pollution. The microwave landing system (MLS) under development by FAA provides increased capabilities over the current ILS. It is, however, necessary and urgent to develop the airborne system's capability to take maximum advantage of the MLS capabilities in order to solve the terminal area problems previously mentioned. A major limiting factor in longitudinal spacing for capacity increase is the trailing vortex hazard. Promising methods for causing early dissipation of the vortices are being explored. Also, flight procedures for avoiding the hazard will be explored.

Reeder, J. P.↗
NASA NTRS1975

High-temperature, reusable surface insulation system

System is capable of withstanding extreme temperature environments ranging from -250 to 2300 F (116 K to 1543 K). System includes impervious, high-density, high-thermal-emittance outer coating which has low coefficient of thermal expansion matching that of insulation.

Source record↗
NASA NTRS1974

New design and operating techniques and requirements for improved aircraft terminal area operations

Current aircraft operating problems that must be alleviated for future high-density terminal areas are safety, dependence on weather, congestion, energy conservation, noise, and atmospheric pollution. The Microwave Landing System (MLS) under development by FAA provides increased capabilities over the current ILS. The development of the airborne system's capability to take maximum advantage of the MLS capabilities in order to solve terminal area problems are discussed. A major limiting factor in longitudinal spacing for capacity increase is the trailing vortex hazard. Promising methods for causing early dissipation of the vortices were explored. Flight procedures for avoiding the hazard were investigated. Terminal configured vehicles and their flight test development are discussed.

Reeder, J. P.↗
NASA NTRS1974

Thermoelectric Outer Planets Spacecraft (TOPS) electronic packaging and cabling development summary report

Electronic packaging and cabling activities performed in support of the Thermoelectric Outer Planets Spacecraft (TOPS) Advanced Systems Technology (AST) project are detailed. It describes new electronic compartment, electronic assembly, and module concepts, and a new high-density, planar interconnection technique called discrete multilayer (DML). Development and qualification of high density cabling techniques, using small gage wire and microminiature connectors, are also reported.

Dawe, R. H.↗
NASA NTRS1975

Landing impact studies of a 0.3-scale model air cushion landing system for a Navy fighter airplane

An experimental study was conducted in order to determine the landing-impact behavior of a 0.3-scale, dynamically (but not physically) similar model of a high-density Navy fighter equipped with an air cushion landing system. The model was tested over a range of landing contact attitudes at high forward speeds and sink rates on a specialized test fixture at the Langley aircraft landing loads and traction facility. The investigation indicated that vertical acceleration at landing impact was highly dependent on the pitch angle at ground contact, the higher acceleration of approximately 5g occurring near zero body-pitch attitude. A limited number of low-speed taxi tests were made in order to determine model stability characteristics. The model was found to have good pitch-damping characteristics but stability in roll was marginal.

Leland, T. J. W.↗
NASA NTRS1974

Physical properties of solar chromospheric plages. II - Chromospheric plage models

Chromospheric models of plages are proposed to explain profiles of the Ca II H, K, 8498-A, 8542-A, and 8662-A lines. These models are consistent with boundary conditions imposed by the photosphere and the Lyman continuum. It is found that increasing emission in these lines is consistent with a picture of increasing temperature gradient in the low chromosphere and the resulting increase in pressure and electron density at similar line optical depths. With this picture it is shown how the distribution of chromospheric parameters across the solar disk can be empirically determined directly from Ca II filtergrams. It is also proposed that the high-density aspects of solar activity are produced by steep temperature gradients in the low chromosphere and thus by the enhanced heating mechanisms that steepen these gradients.

Shine, R. A.↗
NASA NTRS1975

Advanced short haul systems in high density markets

The design requirements, performance, economics, and noise aspects of STOL and VTOL conceptual aircraft developed for short haul air transportation are reviewed, along with the characteristics of areas of high-density annual passenger flow in which the aircraft are intended to operate. It is shown that aircraft of 100 to 200 passenger capacity provide the best return on investment in high density markets. The various STOL propulsive lift concepts have the same general trends with field length; their wing loadings are 20 to 30 pounds per square foot higher than the nonpropulsive lift concepts. A comparison of the aircraft under consideration shows that no one aircraft concept will be optimum for all future operational environments.

Galloway, T. L.↗
NASA NTRS1975

Creep behavior of uranium carbide-based alloys

The present work gives the results of experiments on the influence of zirconium carbide and tungsten on the creep properties of uranium carbide. The creep behavior of high-density UC samples follows the classical time-dependence pattern of (1) an instantaneous deformation, (2) a primary creep region, and (3) a period of steady-state creep. Creep rates for unalloyed UC-1.01 and UC-1.05 are several orders of magnitude greater than those measured for carbide alloys containing a Zr-C and/or W dispersoid. The difference in creep strength between alloyed and unalloyed materials varies with temperature and applied stress.

Seltzer, M. S.↗
NASA NTRS1975

The effect of suprathermal protons on the physical conditions in Seyfert galaxy nuclei

Physical conditions in a high-density hydrogen gas heated and ionized by suprathermal protons are investigated, and the results are applied to the gas in the nuclear region of Seyfert galaxies. The gas is assumed to be optically thick to Lyman and Balmer line radiation. Mechanisms by which the radiation from the gas can balance the heating by the fast protons are investigated, and minimum values for the mass of gas are estimated. Under certain conditions, the suprathermal atoms themselves can cool the ambient gas by rescattering the line radiation into the optically thin region in the wings of the line. This mechanism, optical reverberation, can enhance the broad component of the hydrogen lines produced by inelastic atomic collisions and yield line widths consistent with those observed in Seyfert and quasar spectra. If this mechanism is important, the Lyman decrement can depend strongly on the temperature and density of the ambient hydrogen. The possibility is discussed of achieving dynamic equilibrium of the ambient gas by balancing the momentum transfer from the suprathermals with gravitational attraction of a massive central source.

Ptak, R.↗
NASA NTRS1975

Plasma flow and fast particles in a hypervelocity accelerator - A color presentation

A new concept for particle acceleration for micrometeoroid simulation was developed at NASA Marshall Space Flight Center, using a high-density self-luminescent fast plasma flow to accelerate glass beads (with a diameter up to 1.0 mm) to velocities between 15-20 km/sec. After a short introduction to the operation of the hypervelocity range, the eight-converter-camera unit used for the photographs of the plasma flow and the accelerated particles is described. These photographs are obtained with an eight-segment reflecting pyramidal beam splitter. Wratten filters were mounted between the beam splitter and the converter tubes of the cameras. The photographs, which were recorded on black and white film, were used to make the matrices for the dye-color process, which produced the prints shown.

Igenbergs, E. B.↗
NASA NTRS1975

Aircraft concepts for advanced short haul systems

The results of recent NASA-sponsored high-density and medium-density short-haul (less than 500 miles) air transportation systems studies are summarized. Trends in vehicle characteristics, in particular of RTOL and STOL concepts, are noted, and their economic suitability and impact on the community are examined.

Galloway, T. L.↗
NASA NTRS1975

Automatic categorization of land-water cover types of the Green Swamp, Florida, using Skylab multispectral scanner (S-192) data

The techniques used and the results achieved in the successful application of Skylab Multispectral Scanner (EREP S-192) high-density digital tape data for the automatic categorizing and mapping of land-water cover types in the Green Swamp of Florida were summarized. Data was provided from Skylab pass number 10 on 13 June 1973. Significant results achieved included the automatic mapping of a nine-category and a three-category land-water cover map of the Green Swamp. The land-water cover map was used to make interpretations of a hydrologic condition in the Green Swamp. This type of use marks a significant breakthrough in the processing and utilization of EREP S-192 data.

Coker, A. E.↗