Search NASA⌕ Search

SEARCH · Search NASA

Results for “hybrid cloud”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The effect of spatial resolution on satellite derived cloud cover

The effects of a varying sensor spatial resolution on the cloud fraction derived by reflectance threshold (RT), IR temperature threshold (IRT), hybrid bispectral threshold (HBT) and spatial coherence (SC) methods for cloud retrieval from remotely sensed data were examined experimentally. Eight subscenes from four scenes acquired with the Landsat Thematic Mapper (TM) in 1982, 1983 and 1985 were used in the trials. All cloud retrieval methods were applied to extract the cloud fraction in all the subscences for comparison with the total cloud amount determined from the TM band 4 data, which had 28.5 m resolution.

Wielicki, B. A.↗

Pattern recognition of clouds and ice in polar regions

The study is based on AVHRR imagery and results from Landsat high-spatial-resolution scenes. Among the textual features investigated are the gray level difference vector (GLDV), and sum and difference histogram (SADH) approaches as well as gray level run length, spatial-coherence, and spectral-histogram measures. The traditional stepwise discriminant analysis and neural-network analysis are used for the identification of 20 Arctic surface and cloud classes. A principal-component analysis and hybrid architecture employing a modularized competitive learning layer are utilized. It is pointed out that the cloud-classification accuracy comparable to that of back-propagation could be achieved with a training time two orders of magnitude faster.

Welch, R. M.↗

Enhanced current flow through a plasma cloud by induction of plasma turbulence

Electrodynamic tethers have been proposed as a means of generating power in low earth orbit. One of the limitations on the power generated is the relatively low electron current that can be collected. It is proposed that the electron current can be significantly enhanced by means of current induced plasma turbulence in a plasma cloud around the collecting anode. This is examined for the specific case of lower hybrid turbulence. An important conclusion is that the use of plasma clouds in the ionosphere will entail a high impedance (no instability) and a low impedance (lower hybrid instability) mode of operation depending on the current density.

Hastings, D. E.↗

How Cloud is Accelerating Research at NREL

This presentation coincides with AWS's announcement of their new Parallel Computing Service (PCS) which allows for easy creation of HPC-style clusters in their AWS cloud computing platform. I helped them beta test this service before it was made generally available in August. AWS asked if we would be interested in discussing our experience with the PCS service, and our experience with HPC workloads in the cloud in general, so this slideshow discusses a brief history of scientific computing at NREL and shares a bit of our experiences and approach to utilizing cloud services for HPC-style workloads.

97 MATHEMATICS AND COMPUTING↗

Hybrid Storage Solution

With the rise of artificial intelligence and machine learning, data sets used to train models have become increasingly large. The availability, accessibility and integrity of large data sets has become important to the research conducted at Los Alamos National Laboratory. Ceph is a storage solution suitable for use with critical data because of its distributed nature and ability to keep multiple copies of a file in different locations. The amount of data means that bandwidth, latency, and cost are important factors and the reason most storage solutions are on-premises. However, there are distinct advantages to hosting services in the cloud, namely scalability and ease-of-use. In this paper, we explore the possibility of provisioning a hybrid Ceph cluster that leverages the benefits of both cloud architectures and on-premise performance.

97 MATHEMATICS AND COMPUTING↗

Role of current driven instabilities in the operation of plasma contactors used with electrodynamic tethers

The collection of current to an electrodynamic tether in low LEO is enhanced by a plasma cloud surrounding the anode (called a plasma contactor). The main mechanism by which this is achieved is the scattering, perpendicular to the lines of the magnetic field, of the electrons which enter the plasma cloud. The scattering may be a result of the interaction between the electrons and unstable EM waves, one example being lower-hybrid waves. The boundaries of instability are found for the lower-hybrid waves in a parametric study where, for the cases of Ar and NH3 clouds, the density, the ratio of electron to ion temperature, and the composition of the electron population, are varied. The main conclusion is that the lower-hybrid waves will be confined to the outer regions of the cloud and have the right properties to scatter electrons.

Gioulekas, A.↗

Shifting institutional culture to develop climate solutions with Open Science

To address our climate emergency, “we must rapidly, radically reshape society”—Johnson & Wilkinson, All We Can Save. In science, reshaping requires formidable technical (cloud, coding, reproducibility) and cultural shifts (mindsets, hybrid collaboration, inclusion). We are a group of cross-government and academic scientists that are exploring better ways of working and not being too entrenched in our bureaucracies to do better science, support colleagues, and change the culture at our organizations. We share much-needed success stories and action for what we can all do to reshape science as part of the Open Science movement and 2023 Year of Open Science.

54 ENVIRONMENTAL SCIENCES↗

Lessons Learned From Evaluation and Mitigation of Space Charging Threat Due to Use of Isolated (Hybrid) Bearings on the Pace Ocean Color Instrument

A high precision, high resolution Ocean Color Instrument (OCI) was developed for the Plankton, Aerosol, Cloud ocean Ecosystem (PACE) mission which required the use of electrically isolated Hybrid Bearings (silicon nitride balls). While desirable for technical performance of the instrument, this application caused portions of the instrument to become electrically isolated and come under threat of space charging effects from charged particles and the resultant differential charging. An evaluation of the environment, susceptibility of the components, such as bearings and electronics, and mitigation strategies were performed. As part of that process, simulations of the charging environment, analysis of internal mechanism charging and prediction of most likely discharge paths, testing of the bearings for susceptibility as well as resulting damage were performed and analyzed. Additionally, a novel method to deal with charging was developed. Considerations for dealing with electrically isolated mechanisms, results of the above-mentioned efforts as well as lessons learned are presented.

space charging↗

A cloud and radiation model-based algorithm for rainfall retrieval from SSM/I multispectral microwave measurements

A hybrid statistical-physical retrieval scheme is explored which combines a statistical approach with an approach based on the development of cloud-radiation models designed to simulate precipitating atmospheres. The algorithm employs the detailed microphysical information from a cloud model as input to a radiative transfer model which generates a cloud-radiation model database. Statistical procedures are then invoked to objectively generate an initial guess composite profile data set from the database. The retrieval algorithm has been tested for a tropical typhoon case using Special Sensor Microwave/Imager (SSM/I) data and has shown satisfactory results.

Xiang, Xuwu↗

Diurnal and seasonal variations of clouds from geostationary satellite data

Hourly 8-km visible (0.55-0.75 micron) and infrared (10.5-12.5 microns) data from the eastern Geostationary Operational Environmental Satellite were analyzed with a hybrid bispectral threshold method to yield total, low, middle, and high level cloud fractions and cloud radiative parameters for 250 x 250 sq km regions. These data were analyzed for the area between 45 deg N and 45 deg S, and longitudes 30 deg W and 125 deg W for the autumn of 1978 and the winter of 1979. Preliminary results for winter are presented in the present study. It is shown that diurnal variations of clouds may reveal diurnal variability in regional and large-scale circulation patterns. These diurnal cloud cycles may also have substantial effects on regional and large-scale radiation budgets and, therefore, influence circulation patterns at various spatial scales.

Minnis, P.↗

Diurnal variability of regional cloud and clear-sky radiative parameters derived from GOES data. I - Analysis method. II - November 1978 cloud distributions. III - November 1978 radiative parameters

Cloud cover is one of the most important variables affecting the earth radiation budget (ERB) and, ultimately, the global climate. The present investigation is concerned with several aspects of the effects of extended cloudiness, taking into account hourly visible and infrared data from the Geostationary Operational Environmental Satelite (GOES). A methodology called the hybrid bispectral threshold method is developed to extract regional cloud amounts at three levels in the atmosphere, effective cloud-top temperatures, clear-sky temperature and cloud and clear-sky visible reflectance characteristics from GOES data. The diurnal variations are examined in low, middle, high, and total cloudiness determined with this methodology for November 1978. The bulk, broadband radiative properties of the resultant cloud and clear-sky data are estimated to determine the possible effect of the diurnal variability of regional cloudiness on the interpretation of ERB measurements.

Minnis, P.↗

Cloud model-based simulation of spaceborne radar observations

Simulations of observations from potential spaceborne radars are made based on storm structure generated from the three-dimensional (3D) Goddard cumulus ensemble model simulation of an intense overland convective system. Five frequencies of 3, 10, 14, 35, and 95 GHz are discussed, but the Tropical Rainfall Measuring Mission precipitation radar sensor frequency (14 GHz) is the focus of this study. Radar reflectives and their attenuation in various atmospheric conditions are studied in this simulation. With the attenuation from cloud and precipitation in the estimation of reflectivity factor (dBZ), the reflectivities in the lower atmosphere in the convective cores are significantly reduced. With spatial resolution of 4 km X 4 km, attenuation at 14 GHz may cause as large as a 20-dBZ difference between the simulated measurements of the peak, Z(sub mp) and near-surface reflectivity, Z(sub ms) in the most intense convective region. The Z(sub mp) occurs at various altitudes depending on the hydrometeor concentrations and their vertical distribution. Despite the significant attenuation in the intense cores, the presence of the rain maximum is easily detected by using information of Z(sub mp). In the stratiform region, the attenuation is quite limited (usually less than 5 dBZ), and the reduction of reflectivity is mostly related to the actual vertical structure of cloud distribution. Since Z(sub ms) suffers severe attenuation and tends to underestimate surface rainfall intensity in convective regions. Z(sub mp) can be more representative for rainfall retrieval in the lower atmosphere in these regions. In the stratiform region where attenuation is negligible, however, Z(sub mp) tends to overestimate surface rainfall and Z(sub ms) is more appropriate for rainfall retrieval. A hybrid technique using a weight between the two rain intensities is tested and found potentially usefull for future applications. The estimated surface rain-rate map based on this hybrid approach captures many of the details of the cloud model rain field but still slightly underestimates the rain-rate maximum.

Yeh, H.-Y. M.↗

NASA Tech Briefs, October 2006

Topics covered include: Protein Sensors Based on Optical Ring Resonators; Phase Sensor for Aligning a Segmented Telescope Mirror; Control Software for Advanced Video Guidance Sensor; Generating Control Commands From Gestures Sensed by EMG; Multiple-Flat-Panel System Displays Multidimensional Data; 3D X-Ray Luggage-Screening System; Probe Station and Near-Field Scanner for Testing Antennas; Photodetector Arrays for Multicolor Visible/Infrared Imaging; Semiconductor Bolometers Give Background-Limited Performance; Multichannel X-Band Dielectric-Resonator Oscillator; Automatic Alignment of Displacement-Measuring Interferometer; Earth Observing System Data Gateway; Power User Interface; Mercury Shopping Cart Interface; Cassini Archive Tracking System; Architecture Adaptive Computing Environment; Computing Fault Displacements from Surface Deformations; Oxygen-Permeable, Hydrophobic Membranes of Silanized alpha-Al2O3; SiC Composite Turbine Vanes; Retaining Device for the Interior Structure of a Spacecraft Payload; Tool for Torquing Circular Electrical-Connector Collars; System for Continuous Deaeration of Hydraulic Oil; Solar-Powered Cooler and Heater for an Automobile Interior; Improved Oxygen-Beam Texturing of Glucose-Monitoring Optics; Tool for Two Types of Friction Stir Welding; Stationary Apparatus Would Apply Forces of Walking to Feet; Instrument Would Detect and Collect Biological Aerosols; Boundary Condition for Modeling Semiconductor Nanostructures; Miniature Distillation Column for Producing LOX From Air; Even Illumination from Fiber-Optic-Coupled Laser Diodes; Optically Driven Deformable Mirrors; Algorithm for Automated Detection of Edges of Clouds; Exploiting Quantum Resonance to Solve Combinatorial Problems; Hybrid Terrain Database; On Release of Microbe-Laden Particles from Mars Landers; A Concept for Run-Time Support of the Chapel Language; Thermoelectric Inhomogeneities in (Ag(sub 1-y)SbTe2)(sub x)(PbTe)(sub 1-x); and Spacecraft Escape Capsule.

Source record↗

Summary of Data from the Fifth AIAA CFD Drag Prediction Workshop

Results from the Fifth AIAA CFD Drag Prediction Workshop (DPW-V) are presented. As with past workshops, numerical calculations are performed using industry-relevant geometry, methodology, and test cases. This workshop focused on force/moment predictions for the NASA Common Research Model wing-body configuration, including a grid refinement study and an optional buffet study. The grid refinement study used a common grid sequence derived from a multiblock topology structured grid. Six levels of refinement were created resulting in grids ranging from 0.64x10(exp 6) to 138x10(exp 6) hexahedra - a much larger range than is typically seen. The grids were then transformed into structured overset and hexahedral, prismatic, tetrahedral, and hybrid unstructured formats all using the same basic cloud of points. This unique collection of grids was designed to isolate the effects of grid type and solution algorithm by using identical point distributions. This study showed reduced scatter and standard deviation from previous workshops. The second test case studied buffet onset at M=0.85 using the Medium grid (5.1x106 nodes) from the above described sequence. The prescribed alpha sweep used finely spaced intervals through the zone where wing separation was expected to begin. Some solutions exhibited a large side of body separation bubble that was not observed in the wind tunnel results. An optional third case used three sets of geometry, grids, and conditions from the Turbulence Model Resource website prepared by the Turbulence Model Benchmarking Working Group. These simple cases were intended to help identify potential differences in turbulence model implementation. Although a few outliers and issues affecting consistency were identified, the majority of participants produced consistent results.

Levy, David W.↗

The analysis of polar clouds from AVHRR satellite data using pattern recognition techniques

The cloud cover in a set of summertime and wintertime AVHRR data from the Arctic and Antarctic regions was analyzed using a pattern recognition algorithm. The data were collected by the NOAA-7 satellite on 6 to 13 Jan. and 1 to 7 Jul. 1984 between 60 deg and 90 deg north and south latitude in 5 spectral channels, at the Global Area Coverage (GAC) resolution of approximately 4 km. This data embodied a Polar Cloud Pilot Data Set which was analyzed by a number of research groups as part of a polar cloud algorithm intercomparison study. This study was intended to determine whether the additional information contained in the AVHRR channels (beyond the standard visible and infrared bands on geostationary satellites) could be effectively utilized in cloud algorithms to resolve some of the cloud detection problems caused by low visible and thermal contrasts in the polar regions. The analysis described makes use of a pattern recognition algorithm which estimates the surface and cloud classification, cloud fraction, and surface and cloudy visible (channel 1) albedo and infrared (channel 4) brightness temperatures on a 2.5 x 2.5 deg latitude-longitude grid. In each grid box several spectral and textural features were computed from the calibrated pixel values in the multispectral imagery, then used to classify the region into one of eighteen surface and/or cloud types using the maximum likelihood decision rule. A slightly different version of the algorithm was used for each season and hemisphere because of differences in categories and because of the lack of visible imagery during winter. The classification of the scene is used to specify the optimal AVHRR channel for separating clear and cloudy pixels using a hybrid histogram-spatial coherence method. This method estimates values for cloud fraction, clear and cloudy albedos and brightness temperatures in each grid box. The choice of a class-dependent AVHRR channel allows for better separation of clear and cloudy pixels than does a global choice of a visible and/or infrared threshold. The classification also prevents erroneous estimates of large fractional cloudiness in areas of cloudfree snow and sea ice. The hybrid histogram-spatial coherence technique and the advantages of first classifying a scene in the polar regions are detailed. The complete Polar Cloud Pilot Data Set was analyzed and the results are presented and discussed.

Smith, William L.↗

Pattern recognition analysis of polar clouds during summer and winter

A pattern recognition algorithm is demonstrated which classifies eighteen surface and cloud types in high-latitude AVHRR imagery based on several spectral and textural features, then estimates the cloud properties (fractional coverage, albedo, and brightness temperature) using a hybrid histogram and spatial coherence technique. The summertime version of the algorithm uses both visible and infrared data (AVHRR channels 1-4), while the wintertime version uses only infrared data (AVHRR channels 3-5). Three days of low-resolution AVHRR imagery from the Arctic and Antarctic during January and July 1984 were analyzed for cloud type and fractional coverage. The analysis showed significant amounts of high cloudiness in the Arctic during one day in winter. The Antarctic summer scene was characterized by heavy cloud cover in the southern ocean and relatively clear conditions in the continental interior. A large region of extremely low brightness temperatures in East Antarctica during winter suggests the presence of polar stratospheric cloud.

Ebert, Elizabeth E.↗

The role of global cloud climatologies in validating numerical models

The net upward longwave surface radiation is exceedingly difficult to measure from space. A hybrid method using General Circulation Model (GCM) simulations and satellite data from the Earth Radiation Budget Experiment (ERBE) and the International Satellite Cloud Climatology Project (ISCCP) was used to produce global maps of this quantity over oceanic areas. An advantage of this technique is that no independent knowledge or assumptions regarding cloud cover for a particular month are required. The only information required is a relationship between the cloud radiation forcing (CRF) at the top of the atmosphere and that at the surface, which is obtained from the GCM simulation. A flow diagram of the technique and results are given.

HARSHVARDHAN↗

Advances Towards Ingestion of Multi-Instrument Cloud-Cleared Infrared Radiances in a Global Data Assimilation and Forecast Framework

The progress towards the assimilation of hyperspectral infrared radiances affected by clouds in the NASA GEOS system is presented. After positive published results describing the assimilation of adaptively thinned AIRS cloud-cleared radiances in the 3DVAR GEOS, this team has then successfully tested adaptively thinned CrIS and IASI data as well, and then moved to assimilation in a hybrid 4DEnVAR configuration. The latest effort is focused on the creation of a portable, customizable version of the cloud-clearing algorithm that is being tailored for the hybrid 4DEnVAR system.

Reale, Oreste↗