Search NASA⌕ Search

SEARCH · Search NASA

Results for “implausibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Verification of the surrogate ratio method

Effects of difference in the spin and parity distributions for the surrogate and neutron-induced reactions are investigated. Without assuming specific (schematic) spin-parity distributions, it was found that the surrogate ratio method can be employed to determine neutron fission and capture cross sections if (1) weak Weisskopf-Ewing condition (defined in this paper) is satisfied, (2) there exist two surrogate reactions whose spin-parity distributions of the decaying nuclei are almost equivalent, and (3) difference of the representative spin values between the neutron-induced and surrogate reactions is no much larger than 10(Planck constant/2pi). If these conditions are satisfied, we need not know the spin-parity distributions populated by the surrogate method. Instead, we should just select a pair of surrogate reactions which will populate the similar spin-parity distributions, using targets having similar structure and reactions having the similar reaction mechanisms. Achievable accuracy is estimated to be around 5% and 10% for fission and capture channels, respectively, for nuclei of the Uranium region. The surrogate absolute method may be applicable to determination of fission cross sections with a caution. However, there will be little hope to apply this method for capture cross section measurements unless the spin-parity distributions in the neutron-induced and surrogate reactions are fairly close to each other (which is implausible) or the difference can be corrected theoretically. The surrogate ratio method was shown also to be a robust method in the presence of breakup reactions without assuming specific breakup reaction mechanisms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Inference of gravitational field superposition from quantum measurements

Experiments are beginning to probe the interaction of quantum particles with gravitational fields beyond the uniform-field regime. In nonrelativistic quantum mechanics, the gravitational field in such experiments can be written as a superposition state. We empirically demonstrate that semiclassical theories of gravity can avoid gravitational superposition states only by decoupling the gravitational field energy from the quantum particle’s time evolution. Furthermore, such theories must specify a preferred quantum reference frame in which the equations of motion are valid. To the extent that these properties are theoretically implausible, recent experiments provide indirect evidence that gravity has quantum features. Proposed experiments with superposed gravitational sources would provide even stronger evidence that gravity is nonclassical.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lattice dynamics and elasticity in thermoelectric Mg 2 Si 1 - x Sn x

Lattice dynamics and elastic constants in Mg 2 Si 1-x Sn x were investigated using resonant ultrasound spectroscopy, Mossbauer spectroscopy, nuclear inelastic scattering, and inelastic x-ray scattering. Increasing the Sn content x results in smaller elastic constants, lower Sn specific Debye temperature, lower speed of sound, and a softening of acoustic Sn specific phonons. However, close to band convergence at about x = 0.6, the shear modulus is well below the expected value, which suggests a pronounced connection between band convergence and lattice dynamics in this system. Based on the determined speed of sound and average phonon group velocity, the importance of optical phonons for lattice thermal conductivity is discussed, as the significant reduction in both velocities would yield an implausibly low lattice thermal conductivity of only about 60% of the experimental value. Sn specific thermodynamic quantities calculated from the Sn specific density of phonon states substantiate the general softening of lattice vibrations upon substitution of Si by Sn. A major contribution to the vibrational entropy is thus due to Sn specific vibrational modes. The generalized density of phonon states in Mg 2 Si 1-x Sn x derived from inelastic x-ray scattering for one composition shows that vibrational modes related to lightweight Mg and Si set in above 12.5 meV, whereas Sn specific modes are concentrated around 11 meV.

36 MATERIALS SCIENCE↗

Solid phase epitaxial regrowth of (001) anatase titanium dioxide

The growing interest in metal oxide based semiconductor technologies has driven the need to produce high quality epitaxial films of one metal oxide upon another. Largely unrecognized in synthetic efforts is that some metal oxides offer strongly polar surfaces and interfaces that require electrostatic stabilization to avoid a physically implausible divergence in the potential. The present work examines these issues for epitaxial growth of anatase TiO{sub 2} on strontium titanate (001). Solid phase epitaxial regrowth yields only the (001) facet, while direct crystalline growth by atomic layer deposition yields both the (112) and (001). The presence of amorphous TiO{sub 2} during regrowth may provide preferential stabilization for formation of the (001) facet.

36 MATERIALS SCIENCE↗

Comparison of SUSY spectra generators for natural SUSY and string landscape predictions

Models of natural supersymmetry give rise to a weak scale m weak ~ m W,Z,h ~ 100 GeV without any (implausible) finetuning of independent contributions to the weak scale. These models, which exhibit radiatively driven naturalness (RNS), are expected to arise from statistical analysis of the string landscape wherein large soft terms are favored, but subject to a not-too-large value of the derived weak scale in each pocket universe of the greater multiverse. The string landscape picture then predicts, using the Isajet SUSY spectra generator Isasugra, a statistical peak at m h ~ 125 GeV with sparticles generally beyond current LHC search limits. In this paper, we investigate how well these conclusions hold up using other popular spectra generators: SOFTSUSY, SPHENO and SUSPECT (SSS). We built a computer code DEW4SLHA which operates on SUSY Les Houches Accord files to calculate the associated electroweak naturalness measure Δ EW . The SSS generators tend to yield a Higgs mass peak ~125–127 GeV with a superparticle mass spectra rather similar to that generated by Isasugra. In an Appendix, we include loop corrections to Δ EW in a more standard notation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Method to Estimate the Chronic Health Impact of Air Pollutants in U.S. Residences

Background: Indoor air pollutants (IAPs) cause multiple health impacts. Prioritizing mitigation options that differentially affect individual pollutants and comparing IAPs with other environmental health hazards require a common metric of harm. Objectives: Our objective was to demonstrate a methodology to quantify and compare health impacts from IAPs. The methodology is needed to assess population health impacts of large-scale initiatives—including energy efficiency upgrades and ventilation standards—that affect indoor air quality (IAQ). Methods: Available disease incidence and disease impact models for specific pollutant–disease combinations were synthesized with data on measured concentrations to estimate the chronic heath impact, in disability-adjusted life-years (DALYs) lost, due to inhalation of a subset of IAPs in U.S. residences. Model results were compared with independent estimates of DALYs lost due to disease. Results: Particulate matter ≤ 2.5 μm in aerodynamic diameter (PM2.5), acrolein, and formaldehyde accounted for the vast majority of DALY losses caused by IAPs considered in this analysis, with impacts on par or greater than estimates for secondhand tobacco smoke and radon. Confidence intervals of DALYs lost derived from epidemiology-based response functions are tighter than those derived from toxicology-based, interspecies extrapolations. Statistics on disease incidence in the United States indicate that the upper-bound confidence interval for aggregate IAP harm is implausibly high. Conclusions: The approach demonstrated in this study may be used to assess regional and national initiatives that affect IAQ at the population level. Cumulative health impacts from inhalation in U.S. residences of the IAPs assessed in this study are estimated at 400–1,100 DALYs lost annually per 100,000 persons.

60 APPLIED LIFE SCIENCES↗

Quality-Controlled Meteorological Data from the Flood Control District of Maricopa County (FCDMC) Network, Phoenix, Arizona (1987-2024)

This dataset contains 15- or 30-minute interval meteorological data from the Flood Control District of Maricopa County (FCDMC), Arizona, USA, covering eight key variables across multiple sensor stations between 1987 and 2024. Each variable is stored as a separate CSV file, containing time-series data that have undergone rigorous quality control (QC) procedures and, where appropriate, short-gap interpolation for consistency. The quality control (QC) pipeline consisted of four sequential tests: (1) a range test to ensure all values fall within physically realistic limits, (2) a step test to identify abrupt and implausible changes between consecutive records, (3) a proximity test that validates flagged values from step test using data from nearby stations and exceedance probability thresholds, and (4) a persistence test to detect and remove periods of unrealistically constant readings. These thresholds were calibrated to Arizona’s environmental conditions and sensor specifications. After QC, short gaps (≤2 hours) were linearly interpolated to ensure consistent temporal resolution, except for wind variables. Due to a major upgrade in FCDMC’s data transmission system, only ALERT-2 protocol data (2016–2024) for wind variables are included; earlier ALERT-1 data were excluded because of irregular sampling and high missing rates. This dataset supports regional climate and infrastructure resilience studies by providing standardized, high-resolution meteorological data for the greater Phoenix metropolitan area.

54 ENVIRONMENTAL SCIENCES↗

Model Exploration of an Information-Based Healthcare Intervention Using Parallelization and Active Learning

This paper describes the application of a large-scale active learning method to characterize the parameter space of a computational agent-based model developed to investigate the impact of CommunityRx, a clinical information-based health intervention that provides patients with personalized information about local community resources to meet basic and self-care needs. Additionally, the diffusion of information about community resources and their use is modeled via networked interactions and their subsequent effect on agents' use of community resources across an urban population. A random forest model is iteratively fitted to model evaluations to characterize the model parameter space with respect to observed empirical data. We demonstrate the feasibility of using high-performance computing and active learning model exploration techniques to characterize large parameter spaces; by partitioning the parameter space into potentially viable and non-viable regions, we rule out regions of space where simulation output is implausible to observed empirical data. We argue that such methods are necessary to enable model exploration in complex computational models that incorporate increasingly available micro-level behavior data. We provide public access to the model and high-performance computing experimentation code.

97 MATHEMATICS AND COMPUTING↗

Reactor Pressure Vessel Task of Light Water Reactor Sustainability Program: Level 2 Milestone (M2LW-12OR0402015). Results of Examinations of Surveillance Specimens from Commercial Reactors

The reactor pressure vessel (RPV) in a light-water reactor (LWR) represents the first line of defense against a release of radiation in case of an accident. Thus, regulations that govern the operation of commercial nuclear power plants require conservative margins of fracture toughness, both during normal operation and under accident scenarios. In the unirradiated condition, the RPV has sufficient fracture toughness such that failure is implausible under any postulated condition, including pressurized thermal shock (PTS) in pressurized water reactors (PWR). In the irradiated condition, however, the fracture toughness of the RPV may be severely degraded, with the degree of toughness loss dependent on the radiation sensitivity of the materials. As stated in previous progress reports, the available embrittlement predictive models, e.g. [1], and our present understanding of radiation damage are not fully quantitative, and do not treat all potentially significant variables and issues, particularly considering extension of operation to 80y.

Nanstad, Randy K.↗

Peak Dose Assessment for Proposed DOE-PPPO Authorized Limits

The Oak Ridge Institute for Science and Education (ORISE), a U.S. Department of Energy (DOE) prime contractor, was contracted by the DOE Portsmouth/Paducah Project Office (DOE-PPPO) to conduct a peak dose assessment in support of the Authorized Limits Request for Solid Waste Disposal at Landfill C-746-U at the Paducah Gaseous Diffusion Plant (DOE-PPPO 2011a). The peak doses were calculated based on the DOE-PPPO Proposed Single Radionuclides Soil Guidelines and the DOE-PPPO Proposed Authorized Limits (AL) Volumetric Concentrations available in DOE-PPPO 2011a. This work is provided as an appendix to the Dose Modeling Evaluations and Technical Support Document for the Authorized Limits Request for the C-746-U Landfill at the Paducah Gaseous Diffusion Plant, Paducah, Kentucky (ORISE 2012). The receptors evaluated in ORISE 2012 were selected by the DOE-PPPO for the additional peak dose evaluations. These receptors included a Landfill Worker, Trespasser, Resident Farmer (onsite), Resident Gardener, Recreational User, Outdoor Worker and an Offsite Resident Farmer. The RESRAD (Version 6.5) and RESRAD-OFFSITE (Version 2.5) computer codes were used for the peak dose assessments. Deterministic peak dose assessments were performed for all the receptors and a probabilistic dose assessment was performed only for the Offsite Resident Farmer at the request of the DOE-PPPO. In a deterministic analysis, a single input value results in a single output value. In other words, a deterministic analysis uses single parameter values for every variable in the code. By contrast, a probabilistic approach assigns parameter ranges to certain variables, and the code randomly selects the values for each variable from the parameter range each time it calculates the dose (NRC 2006). The receptor scenarios, computer codes and parameter input files were previously used in ORISE 2012. A few modifications were made to the parameter input files as appropriate for this effort. Some of these changes included increasing the time horizon beyond 1,050 years (yr), and using the radionuclide concentrations provided by the DOE-PPPO as inputs into the codes. The deterministic peak doses were evaluated within time horizons of 70 yr (for the Landfill Worker and Trespasser), 1,050 yr, 10,000 yr and 100,000 yr (for the Resident Farmer [onsite], Resident Gardener, Recreational User, Outdoor Worker and Offsite Resident Farmer) at the request of the DOE-PPPO. The time horizons of 10,000 yr and 100,000 yr were used at the request of the DOE-PPPO for informational purposes only. The probabilistic peak of the mean dose assessment was performed for the Offsite Resident Farmer using Technetium-99 (Tc-99) and a time horizon of 1,050 yr. The results of the deterministic analyses indicate that among all receptors and time horizons evaluated, the highest projected dose, 2,700 mrem/yr, occurred for the Resident Farmer (onsite) at 12,773 yr. The exposure pathways contributing to the peak dose are ingestion of plants, external gamma, and ingestion of milk, meat and soil. However, this receptor is considered an implausible receptor. The only receptors considered plausible are the Landfill Worker, Recreational User, Outdoor Worker and the Offsite Resident Farmer. The maximum projected dose among the plausible receptors is 220 mrem/yr for the Outdoor Worker and it occurs at 19,045 yr. The exposure pathways contributing to the dose for this receptor are external gamma and soil ingestion. The results of the probabilistic peak of the mean dose analysis for the Offsite Resident Farmer indicate that the average (arithmetic mean) of the peak of the mean doses for this receptor is 0.98 mrem/yr and it occurs at 1,050 yr. This dose corresponds to Tc-99 within the time horizon of 1,050 yr.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Microstructural Examinations of Reactor Pressure Vessel Surveillance and Test Reactor Irradiated Materials

The reactor pressure vessel (RPV) in a light-water reactor (LWR) represents the first line of defense against a release of radiation in case of an accident. Thus, regulations that govern the operation of commercial nuclear power plants require conservative margins of fracture toughness, both during normal operation and under accident scenarios. In the unirradiated condition, the RPV has sufficient fracture toughness such that failure is implausible under any postulated condition, including pressurized thermal shock (PTS) in pressurized water reactors (PWR). In the irradiated condition, however, the fracture toughness of the RPV may be severely degraded, with the degree of toughness loss dependent on the radiation sensitivity of the materials. As stated in previous progress reports, the available embrittlement predictive models, e.g. [1], and our present understanding of radiation damage are not fully quantitative, and do not treat all potentially significant variables and issues, particularly considering extension of operation to 80y. The major issues regarding irradiation effects are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Progress Report on Disassembly and Post-Irradiation Experiments for UCSB ATR-2 Experiment

The reactor pressure vessel (RPV) in a light-water reactor (LWR) represents the first line of defense against a release of radiation in case of an accident. Thus, regulations that govern the operation of commercial nuclear power plants require conservative margins of fracture toughness, both during normal operation and under accident scenarios. In the unirradiated condition, the RPV has sufficient fracture toughness such that failure is implausible under any postulated condition, including pressurized thermal shock (PTS) in pressurized water reactors (PWR). In the irradiated condition, however, the fracture toughness of the RPV may be severely degraded, with the degree of toughness loss dependent on the radiation sensitivity of the materials. As stated in previous progress reports, the available embrittlement predictive models, e.g. [1], and our present understanding of radiation damage are not fully quantitative, and do not treat all potentially significant variables and issues, particularly considering extension of operation to 80y.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Effects of ATR-2 Irradiation to High Fluence on Nine RPV Surveillance Materials

The reactor pressure vessel (RPV) in a light-water reactor (LWR) represents the first line of defense against a release of radiation in case of an accident. Thus, regulations that govern the operation of commercial nuclear power plants require conservative margins of fracture toughness, both during normal operation and under accident scenarios. In the unirradiated condition, the RPV has sufficient fracture toughness such that failure is implausible under any postulated condition, including pressurized thermal shock (PTS) in pressurized water reactors (PWR). In the irradiated condition, however, the fracture toughness of the RPV may be severely degraded, with the degree of toughness loss dependent on the radiation sensitivity of the materials. The available embrittlement predictive models and our present understanding of radiation damage are not fully quantitative, and do not treat all potentially significant variables and issues, particularly considering extension of operation to 80y.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Transient superconductivity at nano- and meso-scales

High-T c superconductivity is surpassed by few, if any, other unsolved problems in contemporary physics in terms of its richness, complexity, impact on other fields, and potential technological importance in energy applications. Recent discoveries reveal that the highest transition temperatures emerge under extraordinary experimental conditions such as the strong perturbation of a single atomic layer material by the underlying substrate, application of ~200 GPa pressure or ~MV/cm static electric fields, or irradiation by intense femtosecond optical fields. Research in superconductivity under extreme experimental conditions is challenging and requires the development of novel experimental methods and new theoretical tools suitable to tackle the problem. Our team has approached the challenges of transient superconductivity under intense optical fields by rethinking the types of experimental observables that are best suited to elucidate the physics of light-induced effects. This exercise has identified the need for: i) ultra-fast spatio-temporal probes enabling access to plasmonic properties and also nano-scale inhomogeneities that are ubiquitous in unconventional superconductors; ii) meso-scale structures and hybrid meta-surfaces imperative for strong enhancement of optical fields and iii) theoretical approaches suitable to explain and predict the response of superconductors under ultra-fast photo-excitation. Co-PIs have already made major advances with developing capabilities i)-iii). Therefore, our team is poised to make significant progress in transient superconductivity by exploring novel spatio-temporal effects that currently remain unattainable. Co-investigators will search for light-induced superconductivity in the high-T c cuprates to build upon spectacular recent results still lacking independent confirmations. Novel data acquisition methods combined with nano-plasmonic imaging will allow our team to test the hypothesis of photo-induced superconducting pairing. Spatio-temporal experiments will provide insights into the interplay between superconductivity and competing orders in the cuprates. Co-PIs will also investigate strong light-matter interaction and superconductivity in FeSe monolayers. Finally, we will study spatio-temporal electrodynamics of planar Josephson junctions. This latter direction will allow our team to thoroughly characterize one of the most fundamental examples of inhomogeneity in all of unconventional superconductivity. The proposed experiments in combination with theoretical analysis will provide information that is difficult to obtain using alternative methods. Basov and Averitt will carry out pump-probe spectroscopy and nano-imaging experiments. Averitt and Hone will design and fabricate state-of-the-art meta-surfaces. Theoretical and computational studies of ultrafast transient phenomena will be carried out by Millis and Fogler. Modeling of time-resolved nano-optical effects will be done by Fogler. The bulk of the requested budget will be used to support graduate students at Columbia & UCSD that will be co-supervised by co-PIs. The proposed program is transformative, since it will enable an entire suite of experiments previously either impossible or technically implausible. It will deliver critically important insights not only into mechanisms of unconventional superconductivity but also to many other correlated quantum materials.

36 MATERIALS SCIENCE↗

Assessing the nexus between groundwater and solar energy plants in a desert basin with a dual-model approach under uncertainty

Globally, many solar power plants and other types of renewable energy are being located in water-scarce regions. Many projects rely on groundwater resources whose sustainability is uncertain. In the Chuckwalla Basin in California, quantification of recharge and trans-valley underflow is needed to estimate the impacts of solar project withdrawals on the water table. However, such estimates are highly challenging due to data scarcity, heterogeneous soils and long residence times. Conventional assessment employs isolated groundwater models configured with crude and uniform estimates of recharge. Here, we employ a data-constrained surface subsurface processes model, PAWS+CLM, to provide an ensemble of recharges and underflows with perturbed parameters. Then, the Parameter Estimation (PEST) package is used to calibrate MODFLOW aquifer conductivity and filter out implausible recharges. The novel dual-model approach, potentially applicable in other arid regions, can effectively assimilate groundwater head observations, reject unrealistic parameters, and narrow the range of estimated drawdowns. Simulated recharge concentrates along alluvial fans at the mountain fronts and ephemeral washes where run-off water infiltrates. If an evenly distributed recharge was assumed, it resulted in under-estimated drawdown and larger uncertainty bounds. The withdrawals are approaching total inflow, suggesting the system will be nearing, if not exceeding, its sustainable groundwater production capacity, and a boom of such projects will not be sustainable. Especially, the cost/benefit of pumped-storage projects is called into question as the initial-fill phase depletes entire area’s recharge. Our study highlights the stress on groundwater resources of solar development, and that the speed of groundwater recovery does not indicate sustainability. Main point 1: A novel dual model approach, involving an integrated surface/subsurface model and a groundwater parameter-estimation model, was able to better constrain the model. Main point 2: The groundwater system may be nearing, if not exceeding, its sustainable groundwater production capacity and the speed of recovery is not indicative of sustainability. Main point 3: Results from using conventionally-assumed uniform recharge distort calibrated K fields and impacts assessment

14 SOLAR ENERGY↗

Review and Summary of Corrosion Behavior for Aluminum-Clad Spent Nuclear Fuel in Dry Storage

A description of the corrosion behavior of aluminum alloys used for cladding on aluminum-based, aluminum-clad nuclear fuel used in research reactors under potential dry storage conditions has been compiled. An evaluation is made of potential additional corrosion with water postulated to not be removed during drying. The relative humidity (RH) produced by typical dryness criteria for industrial spent nuclear fuel drying is expected to be low, particularly at high temperatures (17% RH at 20°C and lower at higher temperatures). Existing corrosion data suggests that negligible vapor-phase corrosion of aluminum is expected at such low humidity, even for nominally bare aluminum surfaces. That is, the predicted relative humidity from free water (e.g., 17% RH) is below the “critical” relative humidity (~40% RH at room temperature), below which no significant corrosion is observed for bare aluminum. Furthermore, reported room-temperature corrosion rates are very low even under saturated (100% RH) water vapor. Existing results showing significant vapor-phase corrosion corresponded specifically to conditions of high temper ed with high relative humidity. A relatively large reservoir of (chemically bound) water exists in the aluminum (oxy)hydroxide films on the SNF cladding surface. The estimated total could saturate the gas even at relatively high temperature if fully released; however, its release as molecular water is expected to only be plausible if the temperature during storage exceeds both the drying temperature and the threshold for thermal decomposition of the trihydroxides (~220°C). Therefore, the combination of high temperature and high relative humidity that could drive significant corrosion is considered implausible during sealed dry storage following an appropriate drying process, to include >220°C drying for canisters that may approach or exceed this temperature during storage. Vapor-phase testing of aluminum samples with an adherent (oxy)hydroxide layer, prepared in liquid water to resemble those on actual aluminum-clad spent nuclear fuel (ASNF), did not observe evidence of additional corrosion even at combined high-temperature (up to 180°C) and high-humidity (up to 100% RH) conditions. Instead, small net mass losses were observed for most specimens and attributed to dehydration of the samples, which had been air-dried only prior to testing. ASNF being moved to dry storage is expected to have an existing (oxy)hydroxide film, suggesting that the cladding will be less prone to additional corrosion than bare aluminum metal. If significant corrosion did occur during sealed storage, the overall extent and impact is expected to be small. Corrosion post-closure of a canister would not alter the total amount of hydrogen in the canister, so it would have no effect on the maximum H 2 release already assessed in existing bounding calculations. In addition, the total amount of water in a 25-µm dense bayerite film would consume a only ~8 µm additional aluminum metal on average, if fully consumed by oxidizing aluminum metal to Al 2 O 3 . These conclusions are consistent with ASNF-in-canister simulations to date, which included a reaction pathway for corrosion using kinetics from previous literature and believed to be conservative and predicted very low rates of corrosion.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Human-Centric Lighting: Foundational Considerations and a Five-Step Design Process

At its best, human-centric lighting considers the visual and non-visual effects of light in support of positive human outcomes. At its worst, it is a marketing phrase used to healthwash lighting products or lighting design solutions. There is no doubt that environmental lighting contributes to human health, but how might one practice human-centric lighting given both the credible potential and the implausible hype? Marketing literature is filled with promises. Technical lighting societies have summarized the science but have not yet offered design guidance. Meanwhile, designers are in the middle, attempting to distinguish credible knowledge from that which is dubious to make design decisions that affect people directly. This article is intended to: (1) empower the reader with fundamental understandings of ways in which light affects health; (2) provide a process for human-centric lighting design that can dovetail with the decision-making process that is already a part of a designer's workflow.

60 APPLIED LIFE SCIENCES↗

RNA Catalysis, Thermodynamics and the Origin of Life

The RNA World Hypothesis posits that the first self-replicating molecules were RNAs. RNA self-replicases are, in general, assumed to have employed nucleotide 5'-polyphosphates (or their analogues) as substrates for RNA polymerization. The mechanism by which these substrates might be synthesized with sufficient abundance to supply a growing and evolving population of RNAs is problematic for evolutionary hypotheses because non-enzymatic synthesis and assembly of nucleotide 5'-triphosphates (or other analogously activated phosphodiester species) is inherently difficult. However, nucleotide 2',3'-cyclic phosphates are also phosphodiesters, and are the natural and abundant products of RNA degradation. These have previously been dismissed as viable substrates for prebiotic RNA synthesis. We propose that the arguments for their dismissal are based on a flawed assumption, and that nucleotide 2',3'-cyclic phosphates in fact possess several significant, advantageous properties that indeed make them particularly viable substrates for prebiotic RNA synthesis. An RNA World hypothesis based upon the polymerization of nucleotide 2',3'-cyclic phosphates possesses additional explanatory power in that it accounts for the observed ribozyme “fossil record”, suggests a viable mechanism for substrate transport across lipid vesicle boundaries of primordial proto-cells, circumvents the problems of substrate scarcity and implausible synthetic pathways, provides for a primitive but effective RNA replicase editing mechanism, and definitively explains why RNA, rather than DNA, must have been the original catalyst. Finally, our analysis compels us to propose that a fundamental and universal property that drives the evolution of living systems, as well as pre-biotic replicating molecules (be they composed of RNA or protein), is that they exploit chemical reactions that already possess competing kinetically-preferred and thermodynamically-preferred pathways in a manner that optimizes the balance between the two types of pathways.

59 BASIC BIOLOGICAL SCIENCES↗