Search NASA⌕ Search

SEARCH · Search NASA

Results for “implicit water model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Multigrid Methods for Fully Implicit Oil Reservoir Simulation

In this paper we consider the simultaneous flow of oil and water in reservoir rock. This displacement process is modeled by two basic equations: the material balance or continuity equations and the equation of motion (Darcy's law). For the numerical solution of this system of nonlinear partial differential equations there are two approaches: the fully implicit or simultaneous solution method and the sequential solution method. In the sequential solution method the system of partial differential equations is manipulated to give an elliptic pressure equation and a hyperbolic (or parabolic) saturation equation. In the IMPES approach the pressure equation is first solved, using values for the saturation from the previous time level. Next the saturations are updated by some explicit time stepping method; this implies that the method is only conditionally stable. For the numerical solution of the linear, elliptic pressure equation multigrid methods have become an accepted technique. On the other hand, the fully implicit method is unconditionally stable, but it has the disadvantage that in every time step a large system of nonlinear algebraic equations has to be solved. The most time-consuming part of any fully implicit reservoir simulator is the solution of this large system of equations. Usually this is done by Newton's method. The resulting systems of linear equations are then either solved by a direct method or by some conjugate gradient type method. In this paper we consider the possibility of applying multigrid methods for the iterative solution of the systems of nonlinear equations. There are two ways of using multigrid for this job: either we use a nonlinear multigrid method or we use a linear multigrid method to deal with the linear systems that arise in Newton's method. So far only a few authors have reported on the use of multigrid methods for fully implicit simulations. Two-level FAS algorithm is presented for the black-oil equations, and linear multigrid for two-phase flow problems with strong heterogeneities and anisotropies is studied. Here we consider both possibilities. Moreover we present a novel way for constructing the coarse grid correction operator in linear multigrid algorithms. This approach has the advantage in that it preserves the sparsity pattern of the fine grid matrix and it can be extended to systems of equations in a straightforward manner. We compare the linear and nonlinear multigrid algorithms by means of a numerical experiment.

Molenaar, J.↗

Solvation Effects in the Hydrodeoxygenation of Propanoic Acid over a Model Pd(211) Catalyst

The effects of liquid water and 1,4-dioxane on the hydrodeoxygenation of propionic acid over Pd(211) model surfaces have been studied from first principles. Here, a microkinetic model with parameters obtained from density functional theory and implicit solvation models was developed to study the effects of these solvents on the reaction mechanism and kinetic parameters. In the presence of water, dehydrogenated derivatives of propionic acid and propionate are stabilized, and a new decarboxylation mechanism involving CH 3 CCOOH surface species is facilitated, leading to a higher decarboxylation rate. However, stronger adsorption of CO in the presence of liquid water resulted in fewer free sites and an overall lower turnover frequency. By contrast, in the presence of 1,4-dioxane, the most dominant decarboxylation pathway does not involve a dehydrogenated propionate species, but propionate goes through decarboxylation to form CO 2 and C 2 fragments very similar to the mechanism in the gas phase. Again, in the presence of 1,4-dioxane, CO adsorbs more strongly, and fewer free sites are available for catalysis, leading to a slightly smaller turnover frequency. In all reaction environments, we observed that the decarbonylation mechanism is slightly preferred over the decarboxylation mechanism and that C–OH bond cleavage is the most rate-controlling step followed by α-carbon dehydrogenation steps and (in liquid water) decarboxylation of dehydrogenated derivatives. Comparing solvent effects over Pd(211) with those over Pd(111), we observe that the free site coverage is reduced in the presence of solvents on all Pd surfaces, which reduces the activity of Pd(211). In addition, elementary steps that involve a carboxyl/carboxylate group changing its orientation from the surface to the liquid phase, such as the dehydrogenation of propionate, are significantly facilitated such that liquid water increased the activity of Pd(111).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of the Dielectric Constant on the Ionic Current Rectification of Bipolar Nanopores

In this paper, we investigate how the dielectric constant, ϵ, of an electrolyte solvent influences the current rectification characteristics of bipolar nanopores. It is well recognized that bipolar nanopores with two oppositely charged regions rectify current when exposed to an alternating electric potential difference. Here, we consider dilute electrolytes with NaCl only and with a mixture of NaCl and charged nanoparticles. These systems are studied using two levels of description, all-atom explicit water molecular dynamics (MD) simulations and coarse-grained implicit solvent MD simulations. The charge density and electric potential profiles and current-voltage relationship predicted by the implicit solvent simulations with ϵ = 11.3 show good agreement with the predictions from the explicit water simulations. Under nonequilibrium conditions, the predictions of the implicit solvent simulations with a dielectric constant closer to the one of bulk water are significantly different from the predictions obtained with the explicit water model. Further, these findings are closely aligned with experimental data on the dielectric constant of water when confined to nanometric spaces, which suggests that ϵ decreases significantly compared to its value in the bulk. Moreover, the largest electric current rectification is observed in systems containing nanoparticles when ϵ = 78.8. Using enhanced sampling, we have shown that this larger rectification arises from the presence of a significantly deeper minimum in the free energy of the system with a larger ϵ, and when a negative voltage bias is applied. Since implicit solvent models and mean-field continuum theories are often used to design Janus membranes based on bipolar nanopores, this work highlights the importance of properly accounting for the effects of confinement on the dielectric constant of the electrolyte solvent. The results presented here indicate that the dielectric constant in implicit solvent simulations may be used as an adjustable parameter to approximately account for the effects of nanometric confinement on aqueous electrolyte solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating hydroxide anion interfacial activity by classical and multi-state empirical valence bond molecular dynamics simulations

Molecular dynamics simulations were carried out to understand the propensity of the hydroxide anion for the air-water interface. Two classes of molecular models were used, a classical polarizable model, and a polarizable multi-state empirical valence bond (MS-EVB) potential. The latter model was parameterized to reproduce the structures of small hydroxide-water clusters based on proton reaction coordinates. Furthermore, nuclear quantum effects were introduced into the MS-EVB model implicitly by refitting its potential energy function to account for them. The final MS-EVB model showed reasonable agreement with experiment and ab initio molecular dynamics simulations for dynamical and structural properties. The free energy profiles for both the classical and MS-EVB models were mapped out across the air-water interface, and the classical model gave a higher free energy at the interface with respect to bulk. The MS-EVB model gave a hydroxide anion that approached very close to the interface before it had a sharp increase in free energy at the Gibbs dividing surface. This showed a hydroxide anion that was present at the interface, but strongly repelled from its outer edge near the air. This work was supported by the US Department of Energy's Office of Basec Energy Sciences, Chemical Sciences program. Pacific northwest national Laboratory is operated by Battelle for DOE.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Coarse-Grained Protein Model in a Water-like Solvent

Simulations employing an explicit atom description of proteins in solvent can be computationally expensive. On the other hand, coarse-grained protein models in implicit solvent miss essential features of the hydrophobic effect, especially its temperature dependence, and have limited ability to capture the kinetics of protein folding. We propose a free space two-letter protein (‘‘H-P’’) model in a simple, but qualitatively accurate description for water, the Jagla model, which coarse-grains water into an isotropically interacting sphere. Using Monte Carlo simulations, we design protein-like sequences that can undergo a collapse, exposing the ‘‘Jagla-philic’’ monomers to the solvent, while maintaining a ‘‘hydrophobic’’ core. This protein-like model manifests heat and cold denaturation in a manner that is reminiscent of proteins. While this protein-like model lacks the details that would introduce secondary structure formation, we believe that these ideas represent a first step in developing a useful, but computationally expedient, means of modeling proteins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NONLINEAR EVOLUTION OF GLOBAL HYDRODYNAMIC SHALLOW-WATER INSTABILITY IN THE SOLAR TACHOCLINE

We present a fully nonlinear hydrodynamic 'shallow-water' model of the solar tachocline. The model consists of a global spherical shell of differentially rotating fluid, which has a deformable top, thus allowing motions in radial directions along with latitudinal and longitudinal directions. When the system is perturbed, in the course of its nonlinear evolution it can generate unstable low-frequency shallow-water shear modes from the differential rotation, high-frequency gravity waves, and their interactions. Radiative and overshoot tachoclines are characterized in this model by high and low effective gravity values, respectively. Building a semi-implicit spectral scheme containing very low numerical diffusion, we perform nonlinear evolution of shallow-water modes. Our first results show that (1) high-latitude jets or polar spin-up occurs due to nonlinear evolution of unstable hydrodynamic shallow-water disturbances and differential rotation, (2) Reynolds stresses in the disturbances together with changing shell thickness and meridional flow are responsible for the evolution of differential rotation, (3) disturbance energy primarily remains concentrated in the lowest longitudinal wavenumbers, (4) an oscillation in energy between perturbed and unperturbed states occurs due to evolution of these modes in a nearly dissipation-free system, and (5) disturbances are geostrophic, but occasional nonadjustment in geostrophic balance can occur, particularly in the case of high effective gravity, leading to generation of gravity waves. We also find that a linearly stable differential rotation profile remains nonlinearly stable.

79 ASTRONOMY AND ASTROPHYSICS↗

DNA Recombinase Proteins, their Function and Structure in the Active Form, a Computational Study

Homologous recombination is a crucial sequence of reactions in all cells for the repair of double strand DNA (dsDNA) breaks. While it was traditionally considered as a means for generating genetic diversity, it is now known to be essential for restart of collapsed replication forks that have met a lesion on the DNA template (Cox et al., 2000). The central stage of this process requires the presence of the DNA recombinase protein, RecA in bacteria, RadA in archaea, or Rad51 in eukaryotes, which leads to an ATP-mediated DNA strand-exchange process. Despite many years of intense study, some aspects of the biochemical mechanism, and structure of the active form of recombinase proteins are not well understood. Our theoretical study is an attempt to shed light on the main structural and mechanistic issues encountered on the RecA of the e-coli, the RecA of the extremely radio resistant Deinococcus Radiodurans (promoting an inverse DNA strand-exchange repair), and the homolog human Rad51. The conformational changes are analyzed for the naked enzymes, and when they are linked to ATP and ADP. The average structures are determined over 2ns time scale of Langevian dynamics using a collision frequency of 1.0 ps(sup -1). The systems are inserted in an octahedron periodic box with a 10 Angstrom buffer of water molecules explicitly described by the TIP3P model. The corresponding binding free energies are calculated in an implicit solvent using the Poisson-Boltzmann solvent accessible surface area, MM-PBSA model. The role of the ATP is not only in stabilizing the interaction RecA-DNA, but its hydrolysis is required to allow the DNA strand-exchange to proceed. Furthermore, we extended our study, using the hybrid QM/MM method, on the mechanism of this chemical process. All the calculations were performed using the commercial code Amber 9.

Carra, Claudio↗

A substantial role of soil erosion in the land carbon sink and its future changes

Realistic representation of land carbon sink in climate models is vital for predicting carbon climate feedbacks in a changing world. Although soil erosion that removes land organic carbon has increased substantially since the onset of agriculture, it is rarely included in the current generation of climate models. Using an Earth system model with soil erosion represented, we estimated that on average soil erosion displaces 5% of newly fixed land organic carbon downslope annually in the continental US. In the lower Mississippi river basin and the Cascades, the fraction can be as large as 40%. About 12% of the eroded organic carbon is eventually exported to inland waters, which is equal to 14% of the simulated net carbon gain by terrestrial ecosystems. By comparing the eroded organic carbon export to rivers with the particulate organic carbon export to oceans, we demonstrated that a large fraction of the carbon export to rivers could have been mineralized in inland waters. Importantly, with a direct comparison of eroded and exported soil organic carbon and land net carbon uptake, we found that Earth system models that ignore soil erosion likely offset the erosional carbon loss by increasing heterotrophic respiration implicitly. But as soil erosion and heterotrophic respiration respond differently to a warming climate, this unrealistic compensation would lead to biased predictions of future land carbon sink.

Tan, Zeli↗

On the molecular mechanism of surface charge amplification and related phenomena at aqueous polyelectrolyte-graphene interfaces.

In this communication we illustrate the occurrence of a recently reported new phenomenon of surface-charge amplification, SCA, (originally dubbed overcharging, OC), 1 by means of molecular dynamics simulation of aqueous electrolytes solutions involving multivalent cations in contact with charged graphene walls and the presence of short-chain lithium polystyrene sulfonates where the solvent water is described explicitly with a realistic molecular model. We show that the occurrence of SCA in these systems, in contrast to that observed in primitive models, involves neither contact co-adsorption of the negatively charged macroions nor divalent cations with a large size and charge asymmetry as required in the case of implicit solvents. In fact the SCA phenomenon hinges around the preferential adsorption of water (over the hydrated ions) with an average dipolar orientation such that the charges of the water s hydrogen and oxygen sites induce magnification rather than screening of the positive-charged graphene surface, within a limited range of surface-charge density.

08 HYDROGEN↗

Solvent Dynamics Are Critical to Understanding Carbon Dioxide Dissolution and Hydration in Water

Simulations of carbon dioxide (CO 2 ) in water may aid in understanding the impact of its accumulation in aquatic environments and help advance technologies for carbon capture and utilization (via, e.g., mineralization). Quantum mechanical (QM) simulations based on static molecular models with polarizable continuum solvation poorly reproduce the energetics of CO 2 hydration to form carbonic acid in water, independent of the level of QM theory employed. Only with density-functional-theory-based molecular dynamics and rare-event sampling, followed by energy corrections based on embedded correlated wavefunction theory (in conjunction with density functional embedding theory), can a close agreement between theory and experiment be achieved. Such multilevel simulations can serve as benchmarks for simpler, less costly models, giving insight into potential errors of the latter. The strong influence of sampling/averaging over dynamical solvent configurations on the energetics stems from the difference in polarity of both the transition state and product (both polar) versus the reactant (nonpolar). When a solute undergoes a change in polarity during reaction, affecting its interaction with the solvent, careful assessment of the energetic contribution of the solvent response to this change is critical. Here, we show that static models (without structural sampling) that incorporate three explicit water molecules can yield far superior results than models with more explicit water molecules because fewer water molecules yield less configurational artifacts. Static models intelligently incorporating both explicit (molecules directly participating in the reaction) and implicit solvation, along with a proper QM theory, e.g., CCSD(T) for closed-shell systems, can close the accuracy gap between static and dynamic models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved Treatment of Snow Over Ice Sheets in the NASA GISS Climate Model: Towards Ice Sheet–Climate Coupling

Representing the interactions between ice sheets and climate is essential for more accurate prediction of climate change and sea level rise. Ice sheets interact with the overlying atmosphere via the accumulation of snow and its compaction into firn, then ice, as well as the melting of surface snow and ice and the creation of runoff water. Getting an adequate representation of heat transfer, compaction, and melting processes is essential for an accurate representation of snow on land ice in global climate models. We are implementing an improved snow model on top of land ice as part of an effort to couple the NASA GISS climate model with the PISM ice sheet model. The new snow model includes additional layers and processes that are not currently incorporated (e.g., liquid water retention, percolation and refreezing, and snow densification), and mass and energy transfer methods that are consistent with both static ice sheets (with implicit iceberg fluxes) and interactive ice sheets (with explicit dynamics). We are tuning the densification scheme of this snow model with temperature and density data from common FirnCover and SumUp observations at locations in the accumulation zone of Greenland, and we compare the resulting density profiles to other SumUp density profiles in Greenland and Antarctica. We will assess the impact of this new snow model in climate model simulations with a static ice sheet compared with the previous (simpler) 2-layer snow model. Finally, we aim to use the non-coupled simulations as a baseline to assess the impact of dynamic coupling with an interactive ice sheet model.

snow↗

Affordable Estimation of Solvation Contributions to the Adsorption Energies of Oxygenates on Metal Nanoparticles

Electrocatalysts are mainly characterized by their intrinsic adsorption properties. However, the observed electrocatalytic activity ultimately results from the interplay between such properties and various additional interactions within the electrified solid–liquid interface. One of such phenomena is solvation, which can substantially affect the stability of adsorbates. The incorporation of solvation in computational electrocatalysis models can be fully implicit (inaccurate for H-bonded adsorbates), fully explicit (challenging computation of free energies), or embedded. Here, we show that without any need for explicit or implicit media, a microsolvation approach with just three water molecules captures the contribution of co-adsorbed water to the adsorption energies of *OH and *OOH (two important adsorbates for oxygen reduction) on platinum nanoparticles of various sizes. The approach enables an accurate yet inexpensive explicit modeling of solvent–adsorbate interactions in nanoparticles and the calculation of solvation corrections, estimated as -0.59 ± 0.14 and -0.47 ± 0.13 eV for *OH and *OOH adsorption on Pt, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

RELAP-7 Development Updates

RELAP-7 is a nuclear systems safety analysis code being developed at the Idaho National Laboratory, and is the next generation tool in the RELAP reactor safety/systems analysis application series. RELAP-7 development began in 2011 to support the Risk Informed Safety Margins Characterization (RISMC) Pathway of the Light Water Reactor Sustainability (LWRS) program. The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical methods, and physical models in order to provide capabilities needed for the RISMC methodology and to support nuclear power safety analysis. The code is being developed based on Idaho National Laboratory’s modern scientific software development framework – MOOSE (the Multi-Physics Object-Oriented Simulation Environment). The initial development goal of the RELAP-7 approach focused primarily on the development of an implicit algorithm capable of strong (nonlinear) coupling of the dependent hydrodynamic variables contained in the 1-D/2-D flow models with the various 0-D system reactor components that compose various boiling water reactor (BWR) and pressurized water reactor nuclear power plants (NPPs). During Fiscal Year (FY) 2015, the RELAP-7 code has been further improved with expanded capability to support boiling water reactor (BWR) and pressurized water reactor NPPs analysis. The accumulator model has been developed. The code has also been coupled with other MOOSE-based applications such as neutronics code RattleSnake and fuel performance code BISON to perform multiphysics analysis. A major design requirement for the implicit algorithm in RELAP-7 is that it is capable of second-order discretization accuracy in both space and time, which eliminates the traditional first-order approximation errors. The second-order temporal is achieved by a second-order backward temporal difference, and the one-dimensional second-order accurate spatial discretization is achieved with the Galerkin approximation of Lagrange finite elements. During FY-2015, we have done numerical verification work to verify that the RELAP-7 code indeed achieves 2nd-order accuracy in both time and space for single phase models at the system level.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A fully implicit scheme for global numerical weather prediction

A fast-slow factored scheme is presented for use with shallow-water primitive equation numerical weather prediction models. The technique was developed to reduce the rotational mode errors which arise when the fast and slow terms of the governing differential equations are treated simultaneously. The method factors out the fast and slow terms along the coordinate directions by means of a modified Crank-Nicolson scheme. A finite-difference spatial discretization is carried out in the zonal and meridional directions to reduce the factorization error to near-zero, and that time steps of 60-90 min can be used to obtain acceptably accurate results, even in the presence of fine spatial structures in the flow.

Augenbaum, J. M.↗

Cloud-radiation interactions and their parameterization in climate models

This report contains papers from the International Workshop on Cloud-Radiation Interactions and Their Parameterization in Climate Models met on 18-20 October 1993 in Camp Springs, Maryland, USA. It was organized by the Joint Working Group on Clouds and Radiation of the International Association of Meteorology and Atmospheric Sciences. Recommendations were grouped into three broad areas: (1) general circulation models (GCMs), (2) satellite studies, and (3) process studies. Each of the panels developed recommendations on the themes of the workshop. Explicitly or implicitly, each panel independently recommended observations of basic cloud microphysical properties (water content, phase, size) on the scales resolved by GCMs. Such observations are necessary to validate cloud parameterizations in GCMs, to use satellite data to infer radiative forcing in the atmosphere and at the earth's surface, and to refine the process models which are used to develop advanced cloud parameterizations.

Source record↗

TRITON: A Multi-GPU open source 2D hydrodynamic flood model

A new open source multi-GPU 2D flood model called TRITON is presented in this work. The model solves the 2D shallow water equations with source terms using a time-explicit first order upwind scheme based on an Augmented Roe's solver that incorporates a careful estimation of bed strengths and a local implicit formulation of friction terms. Here, the scheme is demonstrated to be first order accurate, robust and able to solve for flows under various conditions. TRITON is implemented such that the model effectively utilizes heterogeneous architectures, from single to multiple CPUs and GPUs. Different test cases are shown to illustrate the capabilities and performance of the model, showing promising runtimes for large spatial and temporal scales when leveraging the computer power of GPUs. Under this hardware configuration, communication and input/output subroutines may impact the scalability. The code is developed under an open source license and can be freely downloaded in https://code.ornl.gov/hydro/triton.

2D flood model↗

SU-E-T-196: Heat Diffusion Modeling for Digital Holographic Interferometry Dosimetry

Purpose: We have previously demonstrated that with Digital Holographic Interferometry (DHI) 2D spatial calorimetric measurements of high dose rate radiation sources can be obtained. The impact of heat transfer must be considered when undertaking any form of calorimetric measurement, as the radiation induced temperature distributions are subject to degradation due to heat diffusion. Unaccounted for, this limits the accuracy of the approach especially for long delivery times. Methods: 3D modelling of the heat diffusion in water was undertaken, and two different approaches developed to account for this effect. The mathematical framework to describe heat diffusion in 3D was applied, with the differential equations solved numerically using an implicit method. The first approach involved the comparison of the DHI measurements to an independent dose model of the source. The model was forward modeled to account for the heat diffusion during irradiation, allowing a direct comparison to validate the measured results. The second approach involved the correction of the measured data directly, by comparing the temperature distribution of two instances and subtracting the effects of heat diffusion of the first distribution from the second instance. This required the use of the Abel transform to approximate the 3D dose distribution from the 2D DHI results, thus limiting the approach to radiation applications possessing cylindrical symmetry. Results: The first approach resulted in higher accuracy and was more straightforward, but has a major limitation in that the measured results are only able to be utilized in comparison with an independent dose model. The applicability of the second approach is affected by noise in the measurement data and introduces higher uncertainties, but results in higher usability of the final data. Conclusion: Both approaches were implemented, and if used in conjunction would provide the most utility for the interpretation and use of DHI measurements.

07 ISOTOPE AND RADIATION SOURCES↗

Understanding Differences in Water Adsorption Isotherms: Structural Variations, Force Fields, and Monte Carlo Simulation Approaches

Accurate prediction of water adsorption in micro- and mesoporous materials with hydrophobic pores is essential for the design and characterization of advanced adsorbent materials for separation and energy applications. Here, we assess the reproducibility and consistency of water adsorption isotherms in two microporous all-silica MFI zeolite structures (MFI-K and MFI-O) using two different zeolite force fields and three simulation approaches: grand canonical Monte Carlo (GCMC), Gibbs ensemble Monte Carlo (GEMC), and transition matrix Monte Carlo (TMMC). We demonstrate that consistent treatment of the bulk fluid phase in GCMC and TMMC simulations is critical for reconciling isotherms across methods, and we construct simulation-based equations of state for the TIP4P water model to enable rigorous fugacity-to-pressure conversions. Large shifts in the isotherms are observed for two zeolite force fields developed using different parametrization strategies, with the GCS force field representing implicitly a defect-containing all-silica zeolite, whereas the TraPPE-zeo force field accurately represents an essentially defect-free all-silica zeolite. While water in the van Koningsveld structure of MFI exhibits a first-order phase transition and condensation-like step for adsorption near room temperature, water in the Olson structure of MFI displays continuous adsorption, attributed to differences in the adsorption free energy landscapes. Structural analysis reveals that small geometric variations, particularly Si–O–Si bond angles near the strongest adsorption sites, lead to these substantial differences in adsorption behavior. Furthermore, our results highlight the sensitivity of simulated water adsorption isotherms in hydrophobic frameworks to seemingly small differences in the framework structures, force field parametrization, and simulation approaches.

36 MATERIALS SCIENCE↗