SEARCH · Search NASA

Results for “injection height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Skin friction reduction by slot injection at Mach 0.8

Surface skin friction, boundary layer profiles and turbulent intensity due to axially symmetric tangential slot injection into a transonic boundary layer were measured. Effects of slot height, multiple slot injection, and injection mass flow rate on the surface skin friction downstream of the the slot have been investigated. Surface skin friction was a function of the injection mass flow rate for x/s 40. Large normal pressure gradient and relatively large turbulent intensity were found near the slot with small injection mass flow rate; the region the high turbulent intensity moved downstream with increasing injection mass flow rate. The results with two slot injections indicated that the distance between slots should be less than 30 slot heights in order to achieve some benefits from the first slot. Of significant importance in the present investigation is that the skin friction reduction obtained at transonic speed is of the same order as obtained in the hypersonic regime. Additional work is required in order to formulate a correlation between the turbulent intensity and the injection mass flow rate that may be used in future analysis.

Zakkay, V.↗

DOE OSTI2025

Corrigendum to “The Emissions Model Intercomparison Project (Emissions-MIP): quantifying model sensitivity to emission characteristics” published in Atmos. Chem. Phys., 23, 14779–14799, 2023

Anthropogenic emissions of aerosols and precursor compounds are known to significantly affect the energy balance of the Earth–atmosphere system, alter the formation of clouds and precipitation, and have a substantial impact on human health and the environment. Global models are an essential tool for examining the impacts of these emissions. In this study, we examine the sensitivity of model results to the assumed height of SO 2 injection, seasonality of SO 2 and black carbon (BC) particulate emissions, and the assumed fraction of SO 2 emissions that is injected into the atmosphere as particulate phase sulfate (SO 4 ) in 11 climate and chemistry models, including both chemical transport models and the atmospheric component of Earth system models. We find large variation in atmospheric lifetime across models for SO 2 , SO 4 , and BC, with a particularly large relative variation for SO 2 , which indicates that fundamental aspects of atmospheric sulfur chemistry remain uncertain. Of the perturbations examined in this study, the assumed height of SO 2 injection had the largest overall impacts, particularly on global mean net radiative flux (maximum difference of -0.35?W?m-2), SO2 lifetime over Northern Hemisphere land (maximum difference of 0.8?d), surface SO 2 concentration (up to 59?% decrease), and surface sulfate concentration (up to 23?% increase). Emitting SO 2 at height consistently increased SO 2 and SO 4 column burdens and shortwave cooling, with varying magnitudes, but had inconsistent effects across models on the sign of the change in implied cloud forcing. The assumed SO 4 emission fraction also had a significant impact on net radiative flux and surface sulfate concentration. Because these properties are not standardized across models this is a source of inter-model diversity typically neglected in model intercomparisons. These results imply a need to ensure that anthropogenic emission injection height and SO 4 emission fraction are accurately and consistently represented in global models.

Ahsan, Hamza [Pacific Northwest National Laborator↗

NASA NTRS2023

The Emissions Model Intercomparison Project (Emissions-MIP): Quantifying Model Sensitivity to Emission Characteristics

Anthropogenic emissions of aerosols and precursor compounds are known to significantly affect the energy balance of the Earth–atmosphere system, alter the formation of clouds and precipitation, and have a substantial impact on human health and the environment. Global models are an essential tool for examining the impacts of these emissions. In this study, we examine the sensitivity of model results to the assumed height of SO 2 injection, seasonality of SO 2 and black carbon (BC) particulate emissions, and the assumed fraction of SO 2 emissions that is injected into the atmosphere as particulate phase sulfate (SO 4 ) in 11 climate and chemistry models, including both chemical transport models and the atmospheric component of Earth system models. We find large variation in atmospheric lifetime across models for SO 2 , SO 4 , and BC, with a particularly large relative variation for SO 2 , which indicates that fundamental aspects of atmospheric sulfur chemistry remain uncertain. Of the perturbations examined in this study, the assumed height of SO 2 injection had the largest overall impacts, particularly on global mean net radiative flux (maximum difference of −0.35 W m −2 ), SO 2 lifetime over Northern Hemisphere land (maximum difference of 0.8 d), surface SO 2 concentration (up to 59 % decrease), and surface sulfate concentration (up to 23 % increase). Emitting SO 2 at height consistently increased SO 2 and SO 4 column burdens and shortwave cooling, with varying magnitudes, but had inconsistent effects across models on the sign of the change in implied cloud forcing. The assumed SO 4 emission fraction also had a significant impact on net radiative flux and surface sulfate concentration. Because these properties are not standardized across models this is a source of inter-model diversity typically neglected in model intercomparisons. These results imply a need to ensure that anthropogenic emission injection height and SO 4 emission fraction are accurately and consistently represented in global models.

Emissions Model Intercomparison Project↗

NASA NTRS1997

Characteristics of Non-Premixed Turbulent Flames in Microgravity

The overall objectives of this research are: (1) to obtain and analyze experimental data on flame images, and the spatial and temporal distributions of temperature, radiation, velocity and gas-phase species in microgravity turbulent gas-jet diffusion flames; and (2) to utilize these data to validate and refine the existing predictive capabilities. Work on this project commenced in June 1996. The first investigations on turbulent gas-jet diffusion flames in microgravity were initiated by Bahadori and co-workers in 1991. These studies have shown that significant differences exist in the transition processes in normal-gravity and microgravity flames, and that the turbulent flames in microgravity behave very differently as compared to their buoyancy-dominated normal-gravity counterparts. For example, in the transition regime while the visible flame height, for given fuel and nozzle size, in normal gravity decreases, the height of the microgravity flame increases. In the fully developed turbulent regime, the normal-gravity flame height is independent of injection velocity, whereas the microgravity flame height continues to increase, although at a lower rate than in the laminar and transitional regimes. Other differences between the normal-gravity and microgravity flames arise in the jet shear-layer instability characteristics, extent of the transitional regime and blow-off limit characteristics.

Hegde, Uday↗

NASA NTRS2019

Biomass-Burning Smoke Heights over the Amazon Observed from Space

We characterise the vertical distribution of biomass-burning emissions across the Amazon during the biomass-burning season (July–November) with an extensive climatology of smoke plumes derived from MISR and MODIS (2005–2012) and CALIOP (2006–2012) observations. Smoke plume heights exhibit substantial variability, spanning a few hundred metres up to 6 km above the terrain. However, the majority of the smoke is located at altitudes below 2.5 km. About 60 % of smoke plumes are observed in drought years, 40 %–50 % at the peak month of the burning season (September) and 94 % over tropical forest and savanna regions, with respect to the total number of smoke plume observations. At the time of the MISR observations (10:00–11:00 LT), the highest plumes are detected over grassland fires (with an averaged maximum plume height of ∼1100 m) and the lowest plumes occur over tropical forest fires (∼800 m). A similar pattern is found later in the day (14:00–15:00 LT) with CALIOP, although at higher altitudes (2300 m grassland vs. 2000 m tropical forest), as CALIOP typically detects smoke at higher altitudes due to its later overpass time, associated with a deeper planetary boundary layer, possibly more energetic fires, and greater sensitivity to thin aerosol layers. On average, 3 %–20 % of the fires inject smoke into the free troposphere; this percentage tends to increase toward the end of the burning season (November: 15 %–40 %). We find a well-defined seasonal cycle between MISR plume heights, MODIS fire radiative power and atmospheric stability across the main biomes of the Amazon, with higher smoke plumes, more intense fires and reduced atmospheric stability conditions toward the end of the burning season. Lower smoke plume heights are detected during drought (800 m) compared to non-drought (1100 m) conditions, in particular over tropical forest and savanna fires. Drought conditions favour understory fires over tropical forest, which tend to produce smouldering combustion and low smoke injection heights. Droughts also seem to favour deeper boundary layers and the percentage of smoke plumes that reach the free troposphere is lower during these dry conditions. Consistent with previous studies, the MISR mid-visible aerosol optical depth demonstrates that smoke makes a significant contribution to the total aerosol loading over the Amazon, which in combination with lower injection heights in drought periods has important implications for air quality. This work highlights the importance of biome type, fire properties and atmospheric and drought conditions for plume dynamics and smoke loading. In addition, our study demonstrates the value of combining observations of MISR and CALIOP constraints on the vertical distribution of smoke from biomass burning over the Amazon.

Gonzalez-Alonso, Laura↗

NASA NTRS2015

Impact of Improvements in Volcanic Implementation on Atmospheric Chemistry and Climate in the GISS-E2 Model

The representation of volcanic eruptions in climate models introduces some of the largest errors when evaluating historical simulations, partly due to the crude model parameterizations. We will show preliminary results from the Goddard Institute for Space Studies (GISS)-E2 model comparing traditional highly parameterized volcanic implementation (specified Aerosol Optical Depth, Effective Radius) to deploying the full aerosol microphysics module MATRIX and directly emitting SO2 allowing us the prognosically determine the chemistry and climate impact. We show a reasonable match in aerosol optical depth, effective radius, and forcing between the full aerosol implementation and reconstructions/observations of the Mt. Pinatubo 1991 eruption, with a few areas as targets for future improvement. This allows us to investigate not only the climate impact of the injection of volcanic aerosols, but also influences on regional water vapor, O3, and OH distributions. With the skill of the MATRIX volcano implementation established, we explore (1) how the height of the injection column of SO2 influence atmospheric chemistry and climate response, (2) how the initial condition of the atmosphere influences the climate and chemistry impact of the eruption with a particular focus on how ENSO and QBO and (3) how the coupled chemistry could mitigate the climate signal for much larger eruptions (i.e. the 1258 eruption, reconstructed to be approximately 10x Pinatubo). During each sensitivity experiment we assess the impact on profiles of water vapor, O3, and OH, and assess how the eruption impacts the budget of each.

aerosols↗

NASA NTRS1994

Mixing characteristics of directly opposed rows of jets injected normal to a crossflow in a rectangular duct

An experimental investigation of the mixing of nonreacting opposed rows of inline jets injected perpendicular to a uniform crossflow has been conducted in a rectangular duct. Planar Mie-scattering was used to measure the time-average concentration distribution of the jet fluid in planes perpendicular to the duct axis. Orifice configurations with geometric blockages ranging from 0.59 to 0.89 had similar mixing performance when compared at one-half duct height downstream of injection. Blockage was varied by changing the orifice aspect ratio from 1-to-1 to 1-to-1.5 while maintaining orifice spacing-to-duct height (S/H) at 0.425, jet-to-mainstream mass flow ratio (MR) at 2.0, and jet-to-mainstream momentum-flux ratio (J) at 48. The result indicates that the design correlating expression (at MR = 2) for optimum in line mixing of 2.5 approximately equal to (S/H)(square root of J) is independent of the Webb between adjacent orifices and therefore independent of orifice width. Experimental and numerical results for an orifice aspect ratio 1-to-1 case were in good agreement. The results of a comparison of inline 45 degrees slanted slot and round orifice configuration indicate that in order to obtain equivalent mean concentration distributions at the same J it is necessary to use a smaller S/H for the round orifice configuration. Conclusions about the performance of various orifice shapes can only be obtained from comparison of optimized configurations. Inline jets with different momentum-flux ratios on opposite sides were compared at a constant mass flow ratio. The orifice spacing chosen was previously found to be an optimum configuration when opposing values of J were equal and also an optimum for single side injection. Experimental and empirical results were in good agreement.

Liscinsky, D. S.↗

NASA NTRS2005

A Computational Study of a New Dual Throat Fluidic Thrust Vectoring Nozzle Concept

A computational investigation of a two-dimensional nozzle was completed to assess the use of fluidic injection to manipulate flow separation and cause thrust vectoring of the primary jet thrust. The nozzle was designed with a recessed cavity to enhance the throat shifting method of fluidic thrust vectoring. Several design cycles with the structured-grid, computational fluid dynamics code PAB3D and with experiments in the NASA Langley Research Center Jet Exit Test Facility have been completed to guide the nozzle design and analyze performance. This paper presents computational results on potential design improvements for best experimental configuration tested to date. Nozzle design variables included cavity divergence angle, cavity convergence angle and upstream throat height. Pulsed fluidic injection was also investigated for its ability to decrease mass flow requirements. Internal nozzle performance (wind-off conditions) and thrust vector angles were computed for several configurations over a range of nozzle pressure ratios from 2 to 7, with the fluidic injection flow rate equal to 3 percent of the primary flow rate. Computational results indicate that increasing cavity divergence angle beyond 10 is detrimental to thrust vectoring efficiency, while increasing cavity convergence angle from 20 to 30 improves thrust vectoring efficiency at nozzle pressure ratios greater than 2, albeit at the expense of discharge coefficient. Pulsed injection was no more efficient than steady injection for the Dual Throat Nozzle concept.

Deere, Karen A.↗

NASA NTRS1981

Impulsive phase of solar flares. I - Characteristics of high energy electrons

The models describing the operative physical processes occurring during the impulsive phase of a solar flare can be broadly classified as thermal or nonthermal models. The current investigation is part of a series of studies which analyze the general characteristics of the 'nonthermal' models. The results are presented of an analysis regarding the steady state distribution of energetic electrons within the flare plasma. The time independent Fokker-Planck equation is used to determine the steady state distribution of the electrons in the ambient plasma. The model investigated encompasses thick-target, thin-target, and trap aspects of nonthermal hard X-ray models. High energy electrons with some initial energy spectrum and pitch angle distribution are injected at a height above the photosphere either into a closed magnetic loop structure or into an open field structure. Some approximate analytic solutions are discussed and the results of a numerical analysis are presented.

Leach, J.↗

NASA NTRS1994

Injection profiles of solar energetic particles as functions of coronal mass ejection heights

Previous studies with Skylab and Solwind coronal mass ejections (CMEs) have shown that nearly all large E greater than 10 MeV solar energetic particle (SEP) events are associated with fast (v greater than 400 km/sec) CMEs. We compare heights of CMEs observed on the SMM spacecraft with the flux-time profiles of five associated SEP events observed by the GOES spacecraft, including three events observed as ground-level events (GLEs) by neutron monitors. The SEP injection profiles as functions of the CME heights are estimated from the 'solar release times' and the effects of interplanetary scattering. We find that the peaks of the 470 MeV to 4 GeV injection profiles of the GLEs occur when CME heights reach 5 to 15 R(sub 0) or greater and that the onsets occur no earlier than the maxima of the flare impulsive phases. In those events SEP injection appears to result only from a single CME-driven shock and not from the flare impulsive phase or from separate coronal and interplanetary shocks. In one small SEP event an impulsive flux-time profile is consistent with injection during the flare impulsive phase but could also be due to injection from a coronal shock over a limited time.

Kahler, S.↗

NASA NTRS2003

Computational Study of Fluidic Thrust Vectoring using Separation Control in a Nozzle

Deere, Karen↗

NASA NTRS2019

Numerical Investigation and Optimization of a Flushwall Injector for Scramjet Applications at Hypervelocity Flow Conditions

An investigation utilizing Reynolds-averaged simulations (RAS) was performed in order to find optimal designs for an interdigitated flushwall injector suitable for scramjet applications at hypervelocity conditions. The flight Mach number, duct height, spanwise width, and injection angle were the design variables selected to maximize two objective functions: the thrust potential and combustion efficiency. A Latin hypercube sampling design-of-experiments method was used to select design points for RAS. A methodology was developed that automated building geometries and generating grids for each design. The ensuing RAS analysis generated the performance database from which the two objective functions of interest were computed using a one-dimensional performance utility. The data were fitted using four surrogate models: an artificial neural network (ANN) model, a cubic polynomial, a quadratic polynomial, and a Kriging model. Variance-based decomposition showed that both objective functions were primarily driven by changes in the duct height. Multiobjective design optimization was performed for all four surrogate models via a genetic algorithm method. Optimal solutions were obtained at the upper and lower bounds of the flight Mach number range. The Kriging model obtained an optimal solution set that predicted high values for both objective functions. Additionally, three challenge points were selected to assess the designs on the Pareto fronts. Further sampling among the designs of the Pareto fronts are required in order to lower the errors and perform more accurate surrogate-based optimization. sed optimization.

Shenoy, Rajiv R.↗

NASA NTRS2019

Numerical Investigation and Optimization of a Flushwall Injector for Scramjet Applications at Hypervelocity Flow Conditions

An investigation utilizing Reynolds-averaged simulations (RAS) was performed in order to demonstrate the use of design and analysis of computer experiments (DACE) methods in Sandia’s DAKOTA software package for surrogate modeling and optimization. These methods were applied to a flow- path fueled with an interdigitated flushwall injector suitable for scramjet applications at hyper- velocity conditions and ascending along a constant dynamic pressure flight trajectory. The flight Mach number, duct height, spanwise width, and injection angle were the design variables selected to maximize two objective functions: the thrust potential and combustion efficiency. Because the RAS of this case are computationally expensive, surrogate models are used for optimization. To build a surrogate model a RAS database is created. The sequence of the design variables comprising the database were generated using a Latin hypercube sampling (LHS) method. A methodology was also developed to automatically build geometries and generate structured grids for each design point. The ensuing RAS analysis generated the simulation database from which the two objective functions were computed using a one-dimensionalization (1D) of the three-dimensional simulation data. The data were fitted using four surrogate models: an artificial neural network (ANN), a cubic polynomial, a quadratic polynomial, and a Kriging model. Variance-based decomposition showed that both objective functions were primarily driven by changes in the duct height. Multiobjective design optimization was performed for all four surrogate models via a genetic algorithm method. Optimal solutions were obtained at the upper and lower bounds of the flight Mach number range. The Kriging model predicted an optimal solution set that exhibited high values for both objective functions. Additionally, three challenge points were selected to assess the designs on the Pareto fronts. Further sampling among the designs of the Pareto fronts may be required to lower the surrogate model errors and perform more accurate surrogate-model-based optimization.

Shenoy, Rajiv R.↗

DOE OSTI2025

Simulating Droplet-Resolved Haze and Cloud Chemistry Forming Secondary Organic Aerosols in Turbulent Conditions within Laboratory and Cloud Parcels

Most of our existing knowledge of cloud chemistry in regards to forming secondary organic aerosols (SOA) is based on measurements in bulk aqueous solutions. However, SOA reaction kinetics derived from bulk solution measurements might differ from the kinetics in actual cloud droplets, since turbulent mixing and ionic strengths, and ratio of surface area to volume in individual cloud droplets might vary substantially from bulk solutions in the real atmosphere. Three-dimensional models at various scales have been used to simulate aqueous chemistry. However, most of these models do not resolve turbulence down to the smallest length scales of 1 mm and do not simulate cloud chemistry in individual cloud droplets due to large computational costs. Here we incorporate the formation of isoprene epoxydiol SOA (IEPOX-SOA) in individual droplets within a one-dimensional explicit mixing parcel model (EMPM-Chem). We apply EMPM-Chem to simulate turbulence and droplet-resolved IEPOX-SOA formation using a configuration based on the Michigan Tech Pi chamber. We find that the dissolution of IEPOX gases is weighted more towards larger cloud droplets due to their large liquid water content (compared to smaller droplets), while the conversion of dissolved IEPOX to IEPOX-SOA is much greater within smaller deliquesced haze particles due to their higher acidity and ionic strengths compared to cloud droplets. We also find that as droplet residence times increase in the chamber, e.g., due to increasing ammonium bisulfate seed aerosol injection rates and/or increasing heights of the chamber, formation of IEPOX-SOA increases substantially. Thus, our EMPM-Chem model could be used to design future cloud chambers to maximize SOA production from cloud chemistry. We also apply the EMPM-Chem model to simulate how IEPOX-SOA formation evolves in individual cloud droplets within rising cloudy parcels in the atmosphere. We find that as subsaturated air is entrained into and turbulently mixed with the cloud parcel, evaporation causes a reduction in droplet sizes, which leads to corresponding increases in per droplet ionic strength and acidity. Increased droplet acidity in turn greatly accelerates the kinetics of IEPOX-SOA formation. In conclusion, our results provide key insights into single-cloud-droplet chemistry, suggesting that entrainment mixing may be an important process that increases SOA formation in the real atmosphere.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1992

A systematic experimental and computational investigation of a class of contoured wall fuel injectors

The performance of contoured wall fuel injectors for scramjet engine applications is considered. These fuel injectors were aimed at augmenting mixing through axial vorticity production arising from interaction of the fuel/air interface with an oblique shock. The effects of incoming boundary layer height, injector spacing, and injectant to freestream pressure and velocity ratios are examined. Results from 3D flow field surveys and Navier-Stokes simulations are presented.

Waitz, Ian A.↗

NASA NTRS2019

Surrogate Modeling and Optimization of a Combustor with an Interdigitated Flushwall Injector

Design and Analysis of Computer Experiments (DACE) methods are applied and used to perform surrogate modeling and optimization of a simplified combustor flowpath with an interdigitated flushwall injector. The objectives of the optimization are the thrust potential and combustion efficiency, which are evaluated across a range of flight Mach numbers, duct heights, spanwise spacings, and injection angles. The focus of this work is to highlight the application of a sequential learning approach, in order to learn about the responses of the objective functions over the design space and to identify local regions of interest for further analysis. This approach is contrasted to a previous effort where only a single sampling set was used to fit surrogate models and perform optimization. The optimal solutions resulting from the previous and present approaches are different, due to surrogate model-guided local refinement of the design space allowed by the sequential learning method. The values of the global error estimates between the previous and present approaches are comparable, but the sequential method proved more computationally cost-effective. Further refinement in the optimal regions might be needed to improve predictive capability of surrogate models and to obtain the optimal solutions sets.

Rajiv R Shenoy↗

NASA NTRS2021

Quantifying the Source Term and Uniqueness of the August 12, 2017 Pacific Northwest PyroCb Event

A pyrocumulonimbus (pyroCb) firestorm event known as the Pacific Northwest Event (PNE), on August 12, 2017, is examined with a focus on newly reported details of the pyroconvective injections, transport pathway, and young-plume altitude. Because PNE and a subsequent pyroCb event in Australia have been compared to classic stratospheric volcanic plumes, a prime motivation for this work was to exhaustively characterize the beginning of PNE, and to show how it compared to major stratospheric plumes from prior events. We find and report direct evidence that PNE pyroconvection involved seven discrete storms, at least two of which injected a plume to at least 13.7 km, up to 2.5 km above the local tropopause. The morning after, stratospheric smoke was observed above the tropopause to altitudes as great as 16 km. We also quantify for the first time that PNE was preceded by a pyroCb injection one day earlier, generating a plume noteworthy on its own but overwhelmed by the PNE smoke. Our comparison of PNE with five earlier pyroCb events reveals that PNE was not distinctive with respect to its injection and nascent plume height. However, it did produce the greatest known ultraviolet absorbing aerosol index and plume longevity as of 2017.

MISR↗

NASA NTRS1980

Line spread instrumentation for propagation measurements

A line spread device capable of yielding direct measure of a laser beam's line spread function (LSF) was developed and employed in propagation tests conducted in a wind tunnel to examine optimal acoustical suppression techniques for laser cavities exposed to simulated aircraft aerodynamic environments. Measurements were made on various aerodynamic fences and cavity air injection techniques that effect the LSF of a propagating laser. Using the quiescent tunnel as a control, the relative effect of each technique on laser beam quality was determined. The optical instrument employed enabled the comparison of relative beam intensity for each fence or mass injection. It was found that fence height had little effect on beam quality but fence porosity had a marked effect, i.e., 58% porosity alleviated cavity resonance and degraded the beam the least. Mass injection had little effect on the beam LSF. The use of a direct LSF measuring device proved to be a viable means of determining aerodynamic seeing qualities of flow fields.

Bailey, W. H., Jr.↗