Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer spacing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Selective pseudocapacitive immobilization of REE elements on carbon based electrodes

Current extraction technologies for rare earth elements at ambient conditions are reagent and energy intensive, giving rise to significant quantities of secondary waste streams. Exploration of the removal of common cations from aqueous streams has been undertaken with carbon materials and have shown promising results. However, those promising materials have not been explored extensively for rare earth element capture from aqueous process streams. In this study, a carbon electrode was investigated for the adsorption and immobilization of REE elements from aqueous solutions. Cyclic voltammetry studies of the carbon electrode displayed a pseudocapacitive behavior where it was verified that cation adsorption is accompanied by an electron transfer process. Preliminary tests showed that a current density of 89.1 mA. g -1 , allowed for the pseudocapacitive adsorption (PSA) of Nd 3+ cation without the formation of rare earth hydroxides. Hence, the selective PSA of Nd 3+ was verified in an electrolyte solution with equimolar concentrations of Nd 3+ , Mg 2+ , Li + , Na + and K + , achieving separation factors of 8.6, 1.1, and 10.9 for Nd 3+ /Li + , Nd 3+ /Na + , and Nd 3+ /Mg 2+ , respectively. Analysis of the potential-time curves for the various cations suggests that storage of ions in the electrode involved pore-spacings rather than interlayer spacings and was corroborated by XRD analysis. Specific capacitance as high as >640 F.g -1 for Nd 3+ was also observed for the carbon electrode, with Faradaic efficiencies (FE) of > 20% for Nd 3+ and Mg 2+ , and > 9% for Na + . Furthermore, adsorption capacity of >125 mg g -1 after 4hrs of electrosorption was observed for Nd 3+ . In the presence of the Nd 3+ electrolyte, the electrode achieved increasing storage of Nd 3+ with >94% retention of Nd 3+ with a FE > 20% over 6 cycles between loading and releases in 1 M KCl solution. In conclusion, these preliminary results provide information and some guidance on the selective recovery of rare earth elements, such as Nd, in aqueous streams in the presence of competitive cations employing the use of carbon-based materials.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Coordinated Cation Transport in Ti 3 C 2 T x MXene Membranes

Membrane nanofiltration is an attractive strategy for the selective recovery of high-demand metals from wastewater and brine. Effective sieving of ions in aqueous environments will require precise control over membranes’ nanochannel size and chemistry. Ti 3 C 2 T x MXene is an environmentally stable 2D material that can be processed into laminar membranes containing nanoscale interlayer spaces. The MXene interlayer environment depends on the ion species and amount of water intercalated between MXene sheets, and it is the major factor governing permeation and selectivity through MXene membranes. Coordinated ion–ion and ion-interlayer dynamics in the presence of complex mixtures can impact ion permeability and selectivity. Herein, we observe strong competitive effects between different cations (Li + , Na + , and Ca 2+ ) in binary mixtures, resulting in reduced selectivity when compared with single-salt permeability ratios. X-ray diffraction, molecular dynamics, and density functional theory simulations support the conclusion that cations with stronger attraction to MXene flakes can preferentially occupy the MXene nanochannels and hinder other ions via charge or size exclusion. In conclusion, elucidation of ion transport behavior in MXene under complex conditions will allow for more rational design of efficient ion-sieving membranes.

2D Materials↗

Calcium silicate hydrates: Solid and liquid phase composition

This paper presents a review on the relationship between the composition, the structure and the solution in which calcium silicate hydrate (C–S–H) is equilibrated. The silica chain length in C–S–H increases with the silicon concentration and the calcium content in the interlayer space with the calcium concentrations. Sodium and potassium are taken up in the interlayer space, preferentially at low calcium concentrations and thus by low Ca/Si C–S–H. Aluminium uptake in C–S–H increases strongly at higher aluminium concentrations in the solution. At low Ca/Si, aluminium substitutes silica in the bridging position, at Ca/Si > 1 aluminium is bound in TAH. Recently developed thermodynamic models are closely related to the structure of C–S–H and tobermorite, and able to model not only the solubility and the chemical composition of the C–S–H, but also to predict the mean silica chain length and the uptake of aluminium.

36 MATERIALS SCIENCE↗

Engineering Interlayer Electron–Phonon Coupling in WS 2 /BN Heterostructures

In van der Waals (vdW) heterostructures, the interlayer electron–phonon coupling (EPC) provides one unique channel to nonlocally engineer these elementary particles. However, limited by the stringent occurrence conditions, the efficient engineering of interlayer EPC remains elusive. Here we report a multitier engineering of interlayer EPC in WS2/boron nitride (BN) heterostructures, including isotope enrichments of BN substrates, temperature, and high-pressure tuning. The hyperfine isotope dependence of Raman intensities was unambiguously revealed. In combination with theoretical calculations, we anticipate that WS2/BN supercells could induce Brillouin-zone-folded phonons that contribute to the interlayer coupling, leading to a complex nature of broad Raman peaks. We further demonstrate the significance of a previously unexplored parameter, the interlayer spacing. By varying the temperature and high pressure, we effectively manipulated the strengths of EPC with on/off capabilities, indicating critical thresholds of the layer–layer spacing for activating and strengthening interlayer EPC. Our findings provide new opportunities to engineer vdW heterostructures with controlled interlayer coupling.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlling the Structure of MoS 2 Membranes via Covalent Functionalization with Molecular Spacers

Restacked two-dimensional (2D) materials represent a new class of membranes for water-ion separations. Understanding the interplay between the 2D membrane’s structure and the constituent material’s surface chemistry to its ion sieving properties is crucial for further membrane development. In this paper, we reveal, and tune via covalent functionalization, the structure of MoS 2 -based membranes. We find features on both the ~1 nm (interlayer spacing) and ~100 nm (mesoporous voids between layers) length scales that evolve with the hydration level. The functional groups act as permanent molecular spacers, preventing local impermeability caused by irreversible restacking and promoting the uniform rehydration of the membrane. Molecular dynamics simulations show that the choice of functional group tunes the structure of water within the MoS 2 channel and consequently determines the hydrated interlayer spacing. We demonstrate that MoS 2 membranes functionalized with acetic acid have consistently ~92% rejection of Na 2 SO 4 with a flux of ~1.5 lm -2 hr -1 bar -1 .

2D channel↗

Unequal density effect on static structure factor of coupled electron layers

In order to understand the ordered phase, if any, in a real coupled electron layers (CEL), there is a need to take into account the effect of unequal layer density. Such phase is confirmed by a strong peak in a static structure factor. With the aid of quantum/dynamical version of Singwi, Tosi, Land and Sjölander (so-called qSTLS) approximation, we have calculated the intra- and interlayer static structure factors, S{sub ll}(q) and S{sub 12}(q), over a wide range of density parameter r{sub sl} and interlayer spacing d. In our present study, the sharp peak in S{sub 22}(q) has been found at critical density with sufficiently lower interlayer spacing. Further, to find the resultant effect of unequal density on intra- and interlayer static structure factors, we have compared our results with that of the recent CEL system with equal layer density and isolated single electron layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning Fabrication Factors for Reduced Graphene Oxide Forward Osmosis Membranes

Forward osmosis (FO) may serve as a near-zero energy approach for wastewater management and selective chemical enrichment with an appropriate FO membrane. There is a need for novel FO membranes with better physical stability, chemical compatibility, and enhanced reverse flux selectivity. In this work, we have systematically studied a variety of factors for fabricating thermally reduced graphene oxide (RGO) FO filtration membranes and have demonstrated that with a comparable water flux, the RGO membranes have an exceptionally large reverse flux selectivity with 1.5 M sodium sulfate draw solution, about 7 times larger than that of cellulose triacetate membranes under the same testing condition. The interlayer spacing of the membranes can be fine-tuned by varying temperatures, so that the free interlayer spacing is less than 0.7 nm after exposure to water. The RGO-based membranes offer a few advantages with high reverse flux selectivity, mechanical robustness with strong adhesion to nylong support membranes without damage after FO tests and tape peel tests, and enhanced chromate and chlorine resistance. Finally, we have further demonstrated that in the FO processes, one can concentrate waste brine while simultaneously harvesting the osmotic energy as electricity, offering potential applications of forward osmosis-based osmotic batteries for powering electronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and characterization of novel alkylviologens-intercalated vanadyl-vanadate (RV)V{sub 3}O{sub 8}

Various n-alkylviologens-intercalated vanadyl-vanadate (RV)V{sub 3}O{sub 8} were synthesized with the combination of redox and ions-exchange methods. The derivative compounds were characterized by X-ray diffraction (XRD), FT infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The XRD results indicate that the interlayer spacing increases with the alkyl chain length of the alkylviologen cations. The FTIR data shows that alkylviologens were inserted into the interlayers of V{sub 3}O{sub 8}{sup 2-}. XPS data reveals that the vanadium ions in the intercalation compounds are mostly in a pentavalent V{sup 5+} state with some partially reduced to the V{sup 4+} state. The intercalation compounds have the strong absorption character in the ultraviolet and visible light region. Magnetic susceptibility indicates that the (ethylviologen) V{sub 3}O{sub 8} (EV3) is antiferromagnetic and possesses an ordered magnetic structure below 15 K. Above 15 K, EV3 exhibits paramagnetic behavior and a disordered magnetic structure. - Graphical abstract: The (001) reflection of the intercalation compounds shifting to a lower 2{theta} value in comparison with that of (NH{sub 4}){sub 2}V{sub 3}O{sub 8} implies the interlayer space was undergone expansion after intercalation. Highlights: > Novel alkylviologens-intercalated vanadyl-vanadate (RV)V{sub 3}O{sub 8} were synthesized. > Layered framework of V{sub 3}O{sub 8} was still maintained after alkylviologens intercalation. > The vanadium ions of intercalation compounds are composed of V{sup 5+} and V{sup 4+} cations. > Theses compounds have strong absorption in the ultraviolet and visible light region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rare earth separation in voltage-gated 2D MXene membranes

The separation of rare earth elements (REEs) has historically been a complicated and expensive process, producing significant amounts of pollution. To this end, MXene membranes (MXMs) have attracted researchers' interest. It has been demonstrated that MXMs are capable of separating ions and that it is possible to precisely control the separation rate by applying a voltage to the membrane. Indeed, due to their chemical nature, MXenes show outstanding electrical conductivity. However, the effect of applied voltage on the permeation rate and separation effects of iconic species remains an intriguing area of research. In this work, we demonstrate how applying different voltages (gate voltage) to a MXM affects the permeation rate of various REE ions. Our hypothesis to explain MXMs behavior towards REE is that under negative voltage, the interlayer spacing decreases due to attraction between charged MXene surfaces and intercalated cations, increasing the separation factor between REEs. Under positive voltage, the interlayer spacing increases due to repulsion between the MXene surfaces and intercalated cations. However, we demonstrate relatively poor separation capability for REEs at 1mM starting concentration and 1.0 V applied DC voltage (separation factor ~1-3). This study demonstrates the need for future experiments to observe varied experimental conditions and chemical functionalization to determine whether MXene membranes can be an efficient platform for REE separation.

36 MATERIALS SCIENCE↗

Pressure-induced suppression of charge density phases across the entire rare-earth tritellurides by optical spectroscopy

The rare-earth tritellurides (RTe 3 ) are a distinct class of 2D layered materials that recently gained significant attention due to hosting such quantum collective phenomena as superconductivity or charge density waves (CDWs). Many members of this van der Waals (vdW) family crystals exhibit CDW behavior at room temperature, i.e., RTe 3 compound where R = La, Ce, Pr, Nd, Sm, Gd, and Tb. Here, our systematic studies establish the CDW properties of RTe 3 when the vdW spacing/interaction strength between adjacent RTe 3 layers is engineered under extreme hydrostatic pressures. Using a non-destructive spectroscopy technique, pressure-dependent Raman studies first establish the pressure coefficients of phonon and CDW amplitude modes for a variety of RTe 3 materials, including LaTe 3 , CeTe 3 , PrTe 3 , NdTe 3 , SmTe 3 , GdTe 3 , and TbTe 3 . Results further show that the CDW phase is eventually suppressed at high pressures when the interlayer spacing is reduced and interaction strength is increased. Comparison between different RTe 3 materials shows that LaTe 3 with the largest thermodynamic equilibrium interlayer spacing (smallest chemical pressure) exhibits the most stable CDW phases at high pressures. In contrast, CDW phases in late RTe 3 systems with the largest internal chemical pressures are suppressed easily with applied pressure. Overall results provide comprehensive insights into the CDW response of the entire RTe 3 series under extreme pressures, offering an understanding of CDW formation/engineering in a unique class of vdW RTe 3 material systems.

36 MATERIALS SCIENCE↗

Synthesis and investigation of proton conductivity for intercalated kaolinite with 4-amidinopyridinium chloride

The proton-conducting materials have potential application in devices such as fuel cells. In this study, a mineral kaolinite-based proton conducting material, kaolinite-4-amidinopyridinium hydrochloride (K-4-APy–HCl), was synthesized by the intercalated compound kaolinite-4-amidinopyridine (K-4-APy) adsorbing volatilizing HCl. The thermogravimetric analysis (TG), powder X-ray diffraction (PXRD) and IR spectrum confirmed the HCl successfully inserting into the interlayer space of kaolinite and the 4-aminopyridine being protonated. The intercalation efficiency is estimated to be ca. 85.6%. With respect to K-4-APy, the interlayer space expends by 1.53 Å. The thermal decomposition mechanism was studied by PXRD and TG techniques. The K-4-APy–HCl shows proton conductivity with σ=3.379×10{sup −8} S cm{sup −1} at 373 K and E{sub a}=1.159 eV in the anhydrous condition, which are comparable to MOFs-based proton conducting materials. - Graphical abstract: The intercalated hybrid of mineral kaolinite with 4-amidinopyridinium hydrochloride is prepared to use as proton conducting material. - Highlights: • A new strategy is proposed for preparation of kaolinite-based proton conductor. • Intercalatied hybrid was prepared by sequentially inserting 4-amidinopyridine and adsorbing HCl. • The proton conductivity of intercalated hybrid is comparable to MOFs-based proton-conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface and interlayer base-characters in lepidocrocite titanate: The adsorption and intercalation of fatty acid

While layered double hydroxides (LDHs) with positively-charged sheets are well known as basic materials, layered metal oxides having negatively-charged sheets are not generally recognized so. In this article, the surface and interlayer base-characters of O{sup 2−} sites in layered metal oxides have been demonstrated, taking lepidocrocite titanate K{sub 0.8}Zn{sub 0.4}Ti{sub 1.6}O{sub 4} as an example. The low basicity (0.04 mmol CO{sub 2}/g) and low desorption temperature (50–300 °C) shown by CO{sub 2}− TPD suggests that O{sup 2−} sites at the external surfaces is weakly basic, while those at the interlayer space are mostly inaccessible to CO{sub 2}. The liquid-phase adsorption study, however, revealed the uptake as much as 37% by mass of the bulky palmitic acid (C{sub 16} acid). The accompanying expansion of the interlayer space by ~0.1 nm was detected by PXRD and TEM. In an opposite manner to the external surfaces, the interlayer O{sup 2−} sites can deprotonate palmitic acid, forming the salt (i.e., potassium palmitate) occluded between the sheets. Two types of basic sites are proposed based on ultrafast {sup 1}H MAS NMR and FTIR results. The interlayer basic sites in lepidocrocite titanate leads to an application of this material as a selective and stable two-dimensional (2D) basic catalyst, as demonstrated by the ketonization of palmitic acid into palmitone (C{sub 31} ketone). Tuning of the catalytic activity by varying the type of metal (Zn, Mg, and Li) substituting at Ti{sup IV} sites was also illustrated. - Graphical abstract: Interlayer basic sites in lepidocrocite titanate, K{sub 0.8}Zn{sub 0.4}Ti{sub 1.6}O{sub 4}, lead to an intercalation of palmitic acid with a layer expansion. Display Omitted - Highlights: • K{sub 0.8}Zn{sub 0.4}Ti{sub 1.6}O{sub 4} intercalates palmitic acid, forming the occluded potassium salt. • The interlayer expansion is evidenced by PXRD patterns and TEM image. • Two types of basic sites are deduced from ultrafast {sup 1}H MAS NMR. • Lepidocrocite titanate catalyses ketonization of palmitic acid to palmitone and corresponding cracked products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen adsorption and transport in clay-rich geomaterials: Implications for large-volume underground hydrogen storage

Depleted oil and gas reservoirs, characterized by impermeable clay-rich caprocks, are promising sites for large-scale underground hydrogen storage (UHS), which is a key strategy to support hydrogen-based energy systems. However, experimental data on hydrogen storage in clay-rich geomaterials remain scarce. In this work, we experimentally investigated hydrogen adsorption and migration in clay-rich geomaterials in the presence of nitrogen and water under controlled temperatures. Experimental observations showed that hydrogen was adsorbed in dry illite. A dual-porosity transport model was developed to interpret hydrogen transport between large-pore and small-pore domains in illite. The large-pore domain is the space between clay particles (i.e., inter-particle space), whereas the small-pore domain is the nanoscale pore space between clay mineral layers (i.e., inter-layer or intra-particle space). In contrast, nitrogen showed no evidence of adsorption in dry illite because it cannot move into the small-pore domain due to the relatively large kinetic diameter, referred to as the molecular sieving effect. Here, we found that 0.7–1.3 nm is the length scale regulating this molecular sieving effect, matching the interlayer spacing in illite, suggesting that nitrogen is a promising cushion gas in UHS, which aims to maintain adequate pressure in the reservoir for economic operations. In wetted illite, hydrogen was not adsorbed into the interlayer space due to the occupation of adsorption sites by interlayer water, which highlights the critical role of the clay hydration state in controlling hydrogen-clay interactions. Additionally, hydrogen adsorption experiments on crushed shale indicated that the shale surface possessed adsorption sites more favorable for hydrogen than for nitrogen. Through these experiments, we provide new insights into hydrogen storage mechanisms in clay-rich geomaterials and offer valuable laboratory data for evaluating the performance of large-scale UHS systems.

Adsorption↗

Synthesis, IR spectroscopy and crystal structure of [(UO 2 ) 2 {Be(H 2 O) 2 (PO 4 ) 2 }]·(H 2 O), the first compound with a trimer beryllophosphate anion

The first uranyl beryllophosphate, [(UO 2 ) 2 {Be(H 2 O) 2 (PO 4 ) 2 }]·(H 2 O), has been synthesized under hydrothermal conditions at 200°C. The monoclinic unit-cell parameters are: a =9.3361(1), b =8.8545(4), c =9.6592(10) Å, β=93.211(1)°, V =797.21(6) Å 3 , space group P 2 /n , Z =2. The crystal structure has been solved by direct methods and refined to final R 1 = 4.92% using 1294 I > 3σ( I ) reflections in the anisotropic approximation. The structure consists of sheets of Ur O 5 pentagonal bipyramids and PO 4 tetrahedra. Ur O 5 bipyramids are linked by edge-sharing to form infinite chains. Adjacent chains of Ur O 5 bipyramids are connected by sharing alternating edges of uranyl bipyramids with PO 4 tetrahedra. The resulting sheets are based on the well-known uranophane anion-topology. Be atoms are tetrahedrally coordinated by two oxygen atoms of PO 4 tetrahedra and two water molecules in the interlayer space. One isolated water molecule also occurs in the interlayer space, where it is held in position by H bonds. The connection between the phosphorus and beryllium tetrahedra leads to formation of an unbranched trimer [BeP 2 O 8 (H 2 O) 2 ] 4- observed for the first time in inorganic oxysalts.

nuclear (including radiation effects), materials a↗

Theoretical Insights to Bulk Activity Towards Oxygen Evolution in Oxyhydroxides

The nature of the electrochemical water splitting activity of layered pure and Fe-doped NiOOH is investigated using density functional theory calculations. We find similar thermodynamics for the oxygen evolution reaction (OER) intermediates between the layers of oxyhydroxides, that is, in the bulk of the materials as on the (001) surface. The effect of interlayer spacing on adsorption energy is affected by both the crystal structure and the level of hydrogenation of the active sites. For the Fe-doped NiOOH, we observe general weakening of binding between the different OER intermediates and the catalyst material. The calculated OER activity depends both on doping and interlayer spacing, and our results are generally congruent with available experimental data. In conclusion, these results suggest that such interlayer “bulk” sites may contribute to measured OER activity for both the pure and Fe-doped NiOOH catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, electronic, vibrational, and elastic properties of graphene/ MoS 2 bilayer heterostructures

Graphene/MoS 2 van der Waals (vdW) heterostructures have promising technological applications due to their unique properties and functionalities. Many experimental and theoretical research groups across the globe have made outstanding contributions to benchmark the properties of graphene/MoS 2 heterostructures. Even though some research groups have modeled the graphene/MoS 2 heterostructures using first-principles calculations, there exist several discrepancies in the results from different theoretical research groups and the experimental findings. In the present work, we revisit this problem by means of first-principles calculations and address the existing discrepancies about the interlayer spacing between graphene and MoS 2 monolayers in graphene/MoS 2 heterostructures and about the location of Dirac points near the Fermi level. We further investigate the electronic, mechanical, and vibrational properties of the optimized graphene/MoS 2 heterostructures created using 5 x 5/4 x 4 and 4 x 4/3 x 3 supercell geometries having different magnitudes of lattice mismatch. The effect of the varying interlayer spacing on the electronic properties of heterostructures is discussed. Our phonon calculations reveal that the interlayer shear and breathing phonon modes, which are very sensitive to the weak vdW interactions, play a vital role in describing the thermal properties of the studied systems. The thermodynamic and elastic properties of heterostructures are further discussed. A systematic comparison between our results and the results reported from other research groups is presented.

74 ATOMIC AND MOLECULAR PHYSICS↗

Reactivity of Redox Cycled Fe-bearing Subsurface Sediments Towards Hexavalent Chromium Reduction

Structural Fe(II) in clay minerals and natural sediments is known to reduce Cr(VI) to Cr(III), but the effect of redox-cycled Febearing natural sediments on Cr(VI) reduction kinetics is poorly understood. The objective of this study was to understand the kinetics and mechanisms of Cr(VI) reduction by Fe(II) in redox cycled natural sediment. Fe-bearing sediment was collected from the Ringold formation in the 300 area of Hanford, Washington, United States. Fe redox cycling of the sediment was accomplished via four cycles of bioreduction of structural Fe(III) in Hanford sediment and air oxidation of the resulting Fe(II). Bio-produced Fe(II) in Hanford sediment from each redox cycle was utilized to reduce Cr(VI) at three temperatures (10, 20 and 30° C). The initial rate of Cr(VI) reduction generally increased with each redox cycle, which was more pronounced at high temperatures. The amount of Fe(II) oxidized to the amount of Cr(VI) reduced was close to the expected stoichiometric ratio of 3. Aqueous concentrations of Si, Al, and Fe revealed some dissolution of the sediment after reaction with Cr(VI). Xray diffraction (XRD) and scanning electron microscopy (SEM) detected secondary mineral formation. Mössbauer data showed that the oxidation of Fe(II) was coupled with the reduction of Cr(VI) but no Feoxides/ oxyhydroxides formed. Transmission electron microscopy (TEM), electron energy loss spectroscopy (EELS), XANES, and EXAFS were performed for representative reduced Cr solids that formed from reduction of Cr(VI) by sediment-associated Fe(II) at 30oC. TEM revealed that the d-spacing of Cr-reacted montmorillonite at 30° C, a dominant Fe-bearing mineral in Hanford sediment, expanded from 10 Å to 13 Å. This layer expansion was likely due to intercalation of reduced Cr(III) into the interlayer space of the montmorillonite structure. EELS exhibited an L2 absorption peak at 586.0 eV and an L3 absorption peak at 577.0 eV, suggestive of Cr(III) in a hydroxide mineral phase. Similarly, XANES and EXAFS analyses confirmed Cr(VI) reduction to Cr(OH)3 at 30° C and indicated an edge-sharing coordination of the Cr(III) octahedra to 2-3 other Cr or metal ions. This study has important implications for understanding the reactivity of clay-rich sediment towards Cr(VI) reduction at contaminated sites and the stability of the reduced Cr(III).

Bishop, Michael E.↗

Probing the In Situ Pseudocapacitive Charge Storage in Ti 3 C 2 MXene Thin Films with X-ray Reflectivity

MXenes are a large family of two-dimensional materials that are attractive for energy storage due to their high-rate charging capabilities as well as for electrochemical actuators, water purification, and many other technologies. Ion intercalation during electrochemically driven charge and discharge processes is the fundamental process associated with MXene functionality, which we have characterized here using in situ and operando X-ray reflectivity (XRR). Experiments performed at the Advanced Photon Source at Argonne National Laboratory monitored the changes in the structure of a Ti 3 C 2 MXene film on a platinum current collector as a function of static applied potential between 0.3 and –0.7 V vs Ag/AgCl in an aqueous 0.1 M Li 2 SO 4 electrolyte. Negative potential sweeps lead to a contraction of 1.2 Å in the interlayer spacing and a loss of electron density between the layers, likely due to Li + ion insertion and water removal. The change in lattice spacing includes a continuous variation vs potential as well as an additional discrete contraction that occurs near –0.35 V that has the characteristics of a first-order transition. The continuous change in the MXene interlayer spacing is associated with the capacitive charge, while the discrete change in structure correlated to the weak feature in the cyclic voltammogram at –0.35 V can be interpreted as either a pseudocapacitive charging process or a potential-dependent change in capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗