Search NASA⌕ Search

SEARCH · Search NASA

Results for “interplanetary missions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Preliminary estimates of galactic cosmic ray shielding requirements for manned interplanetary missions

Estimates of radiation risk to the blood forming organs from galactic cosmic rays are presented for manned interplanetary missions. The calculations use the Naval Research Laboratory cosmic ray spectrum model as input into the Langley Research Center galactic cosmic ray transport code. This transport code, which transports both heavy ions and nucleons, can be used with any number of layers of target material, consisting of up to five different constituents per layer. Calculated galactic cosmic ray doses and dose equivalents behind various thicknesses of aluminum and water shielding are presented for solar maximum and solar minimum periods. Estimates of risk to the blood forming organs are made using 5 cm depth dose/dose equivalent values for water. These results indicate that at least 5 g/sq cm (5 cm) of water of 6.5 g/sq cm (2.4 cm) of aluminum shield is required to reduce annual exposure below the current recommended limit of 50 rem. Because of the large uncertainties in fragmentation parameters, and the input cosmic ray spectrum, these exposure estimates may be uncertain by as much as 70 percent. Therefore, more detailed analyses with improved inputs could indicate the need for additional shielding.

Townsend, Lawrence W.↗
NASA NTRS1960

Fast Interplanetary Missions with Low-Thrust Propulsion Systems

A simple family of indirect transfer trajectories between circular orbits is used to evaluate the mass ratio required to complete round-trip interplanetary missions using low-thrust propulsion systems. The results indicate that indirect interplanetary trajectories yield substantial reductions in total round-trip time for low-thrust as well as high-thrust vehicles, and that space vehicles propelled with electric rockets may produce greater reductions in trip time, for a given initial weight, than those propelled by high-thrust nuclear rockets.

Moeckel, W. E.↗
NASA NTRS1963

Early manned interplanetary mission study, volume i summary report

The studies reported herein were prepared by Lockheed Missiles & Space Company for the George C. Marshall Space Flight Center, Huntsville, Ala., under Contract No. NAS 8-5024. The results of the Early Manned Interplanetary Mission Study are reported in two volumes. Volume 1 contains the unclassified portion of the studies and Volume 2 presents the classified (CRD) studies relating to orbital escape propulsion systems.

Manned space flight↗
NASA NTRS1994

Estimates of HZE particle contributions to SPE radiation exposures on interplanetary missions

Estimates of radiation doses resulting from possible HZE (high energy heavy ion) components of Solar Particle Events (SPEs) are presented for crews of manned interplanetary missions. The calculations assume a model spectrum obtained by folding measured solar flare HZE particle abundances with the measured energy spectra of SPE alpha particles. These hypothetical spectra are then transported through aluminum spacecraft shielding. The results, presented as estimates of absorbed dose and dose equivalent, indicate that HZE components by themselves are not a major concern for crew protection but should be included in any overall risk assessment. The predictions are found to be sensitive to the assumed spectral hardness parameters.

Townsend, L. W.↗
NASA NTRS1994

Galactic cosmic ray radiation levels in spacecraft on interplanetary missions

Using the Langley Research Center Galactic Cosmic Ray (GCR) transport computer code (HZETRN) and the Computerized Anatomical Man (CAM) model, crew radiation levels inside manned spacecraft on interplanetary missions are estimated. These radiation-level estimates include particle fluxes, LET (Linear Energy Transfer) spectra, absorbed dose, and dose equivalent within various organs of interest in GCR protection studies. Changes in these radiation levels resulting from the use of various different types of shield materials are presented.

Shinn, J. L.↗
NASA NTRS1961

Fast Interplanetary Missions with Low-Thrust Propulsion Systems

A simple family of indirect-transfer trajectories between circular orbits is used to evaluate the mass ratio required to complete round-trip interplanetary missions using low-thrust propulsion systems. These trajectories, although not optimum, yielded very substantial reductions in total round-trip time for Mars missions with moderate increases in initial weight. For a powerplant specific weight a of 10 pounds per kilowatt of jet power, trip times were reduced from 1200 to 600 days, for a typical manned mission, with an initial weight increase of a factor of two. Comparison with a nuclear rocket with 1000-second specific impulse indicated that the electric-propulsion system required less initial weight for trip times as low as 550 days with alpha equal to 10 and as low as 400 days with alpha equal to 5 pounds per kilowatt. Further weight reductions would be expected with more nearly optimum trajectories.

Moeckel, W. E.↗
NASA NTRS1992

MIRACAL: A mission radiation calculation program for analysis of lunar and interplanetary missions

A computational procedure and data base are developed for manned space exploration missions for which estimates are made for the energetic particle fluences encountered and the resulting dose equivalent incurred. The data base includes the following options: statistical or continuum model for ordinary solar proton events, selection of up to six large proton flare spectra, and galactic cosmic ray fluxes for elemental nuclei of charge numbers 1 through 92. The program requires an input trajectory definition information and specifications of optional parameters, which include desired spectral data and nominal shield thickness. The procedure may be implemented as an independent program or as a subroutine in trajectory codes. This code should be most useful in mission optimization and selection studies for which radiation exposure is of special importance.

Nealy, John E.↗
NASA NTRSDate not supplied

Rocket Lab Venus - Enabling Low-Cost Interplanetary Missions

Rocket Lab’s mission to Venus, launching in January 2025, aims to demonstrate that small launch vehicles, such as Electron, and high-energy small spacecraft, such as Photon, can enable a new paradigm of regular, low-cost interplanetary missions. The primary science mission involves a small ~20 kg direct entry probe that will sample the Venusian cloud layers with an autofluorescing nephelomoeter. The entry probe thermal protection system (TPS) is even more critical than usual due to the selected entry trajectory and the lack of suitable heritage TPS materials. NASA’s newly developed 3D Woven Carbon Phenolic, a derivative of the Heatshield for Extreme Entry Environment Technology (HEEET) material, is an enabling technology for this mission, and it will comprise the probe forebody heat shield. The work that led to the selection of 3D Woven Carbon Phenolic, the TPS cost-reduction approaches taken, and the future possibilities of such an approach to probe development are presented.

Lyle Campbell↗
NASA NTRSDate not supplied

Rocket Lab Venus - Enabling Low-Cost Interplanetary Missions

Rocket Lab’s mission to Venus [1], launching in January 2025, aims to demonstrate that small launch vehicles, such as Electron, and high-energy small spacecraft, such as Photon, can enable a new paradigm of regular, low-cost interplanetary missions. The Electron launch vehicle will deliver the Photon spacecraft carrying the entry probe into low earth orbit, at which point Photon will take over and put both itself and the attached probe on an Earth-Venus transfer trajectory, with assistance from a Lunar flyby. The primary science objective of the mission is to sample the Venusian cloud layers between atitudes of 45 and 60 km above the surface with an autofluorescing nephelometer. The ~1kg scientific instrument will be carried by a small ~17 kg direct entry probe which will separate from the Photon spacecraft approximately 30 minutes prior to atmospheric entry. The probe outer mould line is a scaled down version of the Deep Space 2 probes [2]. NASA’s newly developed 3D Woven Carbon Phenolic, a derivative of the Heatshield for Extreme Entry Environment Technology (HEEET) material [3], is an enabling technology for this mission, and it will comprise the probe forebody heat shield.The probe will communicate directly back to the Earth during its descent via a small on-board radio frequency (RF) antenna. The hyperbolic Venus encounter will see the probe enter the Venusia atmosphere at approximately 11 km/s with an entry flight path angle (EFPA) of about 10°. This relatively low entry angle was selected to increase the duration of the descent phase, reduce the peak deceleration, and reduce the sensitivity of the nominal entry environments to navigational errors. For reference, the Pioneer Venus probes entered at EFPAs varying from about 25° to 70°, resulting in peak decelerations between around 220 and 450 g’s and peak stagnation point heat fluxes ranging from about 40 to 75 MW/m2 [4]. In comparison, the Rocket Lab Venus probe will experience a lower preak deceleration of around 60 g’s and a lower peak stagnation point heat flux of about 15 MW/m2, at the cost of a greater total heat load and correspondingly higher thermal protection system (TPS) mass fraction. This paper recounts the development history of the TPS for the Rocket Lab Venus probe, with a focus on the unique requirements of the mission. In particular, the effect on the TPS design of the mission’s tight budget, short development timeline, slim mass and RF link margins, and mild but long duration entry heating. Rocket Lab’s initial investigations into a ‘hybrid’ TPS [5] based on a scaled version of the Pioneer Venus full-density carbon phenolic forebody shield, and the abandonment of this approach in favour of NASA’s 3D Woven Carbon Phenolic is presented. Additionally, the leveraging of previous testing under the HEEET project at higher conditions and the associated TPS margining strategy that was adopted to avoid the need for extensive mission-specific arc jet testing is discussed. Finally, this paper concludes with a brief consideration of the feasibility of a future low-cost aerocapture technology demonstrator mission based on the 2025 Rocket Lab Venus mission and entry probe.

Lyle Campbell↗
NASA NTRS2016

MarCO: Interplanetary Mission Development on a CubeSat Scale

Shortly after JPL’s Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) mission launches, separates, and commences its cruise phase, two CubeSats will deploy from the launch vehicle’s upper stage and begin independent flight to Mars (Fig. 1). During InSight’s entry, descent, and landing (EDL) sequence, these twin Mars Cube One (MarCO) spacecraft will fly 3,500 km above the Martian surface, recording and relaying InSight UHF radio data to the Deep Space Network (DSN) on Earth1. MarCO is a twin CubeSat mission developed by the NASA Jet Propulsion Laboratory (JPL) to accompany the InSight (Interior Exploration using Seismic Investigations, Geodesy and Heat Transport) Mars mission lander. MarCO's primary mission objective is to launch with InSight and independently fly to Mars to serve as a communications relay during InSight's entry, descent, and landing (EDL) phase. MarCO represents a new type of deep space mission: CubeSats at Mars. Building on the development of JPL's first interplanetary CubeSat project, the Interplanetary Nano-Spacecraft Pathfinder in Relevant Environment (INSPIRE), MarCO further refined the approach to hardware, software, and ground architecture development to solve the challenges of quickly building low-budget spacecraft to fly to Mars. The greatest constraint, beyond others typical of CubeSat missions, was time. The duration between MarCO's conception to completion of spacecraft assembly was less than two years - an unprecedented schedule for any planetary mission to date. Through necessity, MarCO has built on previous experience, procedures, systems, and development methodologies, defining a new niche for supporting larger primary missions. The MarCO spacecraft are poised to write a new chapter in deep space exploration. Originally slated to launch and reach Mars in 2016, the InSight mission schedule subsequently slipped to 2018. During the original landing of InSight, Earth would not be in view, and no orbiter around Mars would have been in position to both receive UHF EDL data and simultaneously relay it back to Earth. It was from this obstacle that MarCO was conceived. Regardless of any changes to InSight’s 2018 EDL configuration geometry, MarCO is still expected to fly and serve in the same capacity as originally designed: the first CubeSat mission to Mars. CubeSats have historically been firmly in the domain of universities and small companies. As first conceived, they served as a platform upon which to teach all aspects of the space mission lifecycle. JPL took on this mission type with Interplanetary Nano-Spacecraft Pathfinder in Relevant Environment2 (INSPIRE), moving the concept into a new domain: deep space. Building from the INSPIRE platform and lessons learned, MarCO addressed new challenges in the domain of planetary missions: independent interplanetary flight and navigation, integration with a large-scale mission, long-distance and long-delay communication, short development time, and a small development team. Of these, the greatest constraint was schedule: only 18 months passed from conception of mission concept until delivery of fully assembled and tested flight hardware. Careful selection of mission team, along with extensive use of off-the-shelf equipment, and streamlining automated processes, was essential. This achievement represents the next step in the evolution of CubeSats beyond low-Earth orbit.

Werne, Thomas↗
NASA NTRS2018

Integrated Data Visualization for Human Missions

Interplanetary missions produce exceptionally large and complex volumes of data that can be extremely difficult to navigate. This is especially true for human missions. This project seeks to develop an integrated data visualization environment that builds on the success of Apollo17.org allowing for integration of operational, engineering and scientific data while also preserving the context under which it was collected during the mission. We will build a product that integrates existing data from the Neutral Buoyancy Lab (NBL) to improve data visualization for extra vehicular activity and interplanetary missions.

Regberg, Aaron B.↗
NASA NTRS2000

The Performance of Advanced Solar Cells for Interplanetary Missions

Recent advances in space cell technology have produced substantial increases in Air Mass zero efficiency. Since these cells have been developed primarily for Earth orbiting missions, little is known of their behavior at distances far from the sun.

solar cells LILT interplanetary missions↗