Search NASA⌕ Search

SEARCH · Search NASA

Results for “interval”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Concept of Operations for Interval Management Arrivals and Approach

This paper presents the concept of operations for interval management operations to be deployed in the US National Airspace System (NAS) by the Federal Aviation Administration (FAA) Interval Management Program. The arrivals and approach operations are explored in detail including the primary operation and variations. The use of interval management operations is described that begin in en route airspace and continue to a termination point inside the arrival terminal area in the highly automated terminal environment that includes other arrival management tools such as arrival metering, Ground-based Interval Management - Spacing (GIM-S), and Terminal Sequencing and Spacing (TSAS). The roles of Air Traffic and Pilots and the ground automation tools that are used by Air Traffic Controllers to enable the operations are explored.

Hicok, Daniel S.↗
NASA NTRSDate not supplied

Estimation of Permanent Magnet Synchronous Motor Parameters using a Linear Unknown Input Interval Observer

This paper develops and evaluate a technique to estimate the speed and unknown load torque of a permanent magnet synchronous motor (PMSM). An interval unknown input observer (UIO) for linear time-invariant (LTI) systems is designed and utilized to estimate the PMSM parameters. Interval UIOs are advantageous as they allow for the estimation of both states and unknown inputs, while accounting for varying uncertainty sources, such as model and measurement uncertainties inherent in dynamic systems and processes. First, the nonlinear PMSM model is linearized to transform it to a suitable form for application of the linear interval UIO. Then, the interval UIO is applied to jointly estimate the motor speed and the unknown load torque disturbance. Assuming that the measurement noise and disturbances are bounded, lower and upper bounds are first computed for the unmeasured state (motor speed) and then for the unknown input (load torque). The proposed approach and its limitations are demonstrated for the nonlinear PMSM model derived from its equivalent electrical circuit.

Elinirina I Robinson↗
NASA NTRSDate not supplied

Interval Predictor Models for Robust System Identification

This paper proposes a framework for the identification and uncertainty quantification of plant models according to multivariable data. The only restriction imposed upon such models is for their outputs to depend continuously on their parameters. An Interval Predictor Model (IPM) prescribes the parameters of a computational model as a path-connected set thereby making each predicted output an interval-valued function of its inputs. The formulation proposed seeks the parameter set for which the predicted outputs tightly enclose the data. This set, which is modeled as a semi-algebraic set of low-degree polynomials, enables the characterization of possibly strong parameter dependencies commonly found in practice. This uncertainty characterization makes the resulting plant model amenable to robust control approaches using polynomial optimization. Furthermore, we use non-convex scenario theory to assess the reliability of the resulting IPM. This assessment yields a distribution-free upper bound on the probability that future data will fall outside the predicted intervals.

interval↗
NASA NTRS1972

Spectral observations of Venus in the frequency interval 18.5-24.0 GHz - 1964 and 1967-68.

During July 1964, Venus was observed with a tunable radiometer at eight frequencies in the interval 20.6-24.0 GHz and again at six frequencies in the interval 18.5-24.0 GHz during an eight-month period beginning approximately one month after the inferior conjunction of 1967. Microwave spectra for these frequency intervals were computed using the results from Mariner 5 and Veneras 4-7 and compared to these data. One block of data suggests a lower percentage of H2O than that reported by the Venera probes, while other blocks may be consistent with the probe data. These data therefore suggest that the distribution of water vapor down to atmospheric levels probed at these frequencies may vary with time or else the Venera probes may have detected localized enhancements in water vapor.

Jones, D. E.↗
NASA NTRS1973

Exact intervals and tests for median when one sample value possibly an outliner

Available are independent observations (continuous data) that are believed to be a random sample. Desired are distribution-free confidence intervals and significance tests for the population median. However, there is the possibility that either the smallest or the largest observation is an outlier. Then, use of a procedure for rejection of an outlying observation might seem appropriate. Such a procedure would consider that two alternative situations are possible and would select one of them. Either (1) the n observations are truly a random sample, or (2) an outlier exists and its removal leaves a random sample of size n-1. For either situation, confidence intervals and tests are desired for the median of the population yielding the random sample. Unfortunately, satisfactory rejection procedures of a distribution-free nature do not seem to be available. Moreover, all rejection procedures impose undesirable conditional effects on the observations, and also, can select the wrong one of the two above situations. It is found that two-sided intervals and tests based on two symmetrically located order statistics (not the largest and smallest) of the n observations have this property.

Keller, G. J.↗
NASA NTRS1974

A study to determine the usefulness of interval analysis in solving problems in celestial mechanics

This investigation was undertaken to determine the usefulness of interval analysis to numerical integration and matrix inversion techniques and to combine these results to determine the value of interval analysis in bounding computational errors in the two-body problem. Conclusions were that interval analysis may be worthwhile in certain small scale isolated problems, but its usefulness in any large scale problem is doubtful.

Walling, D.↗
NASA NTRS1976

Detectability of auditory signals presented without defined observation intervals

Ability to detect tones in noise was measured without defined observation intervals. Latency density functions were estimated for the first response following a signal and, separately, for the first response following randomly distributed instances of background noise. Detection performance was measured by the maximum separation between the cumulative latency density functions for signal-plus-noise and for noise alone. Values of the index of detectability, estimated by this procedure, were approximately those obtained with a 2-dB weaker signal and defined observation intervals. Simulation of defined- and non-defined-interval tasks with an energy detector showed that this device performs very similarly to the human listener in both cases.

Watson, C. S.↗
NASA NTRS1977

Optical timing receiver for the NASA laser ranging system. Part 2: High precision time interval digitizer

The development of a high precision time interval digitizer is described. The time digitizer is a 10 psec resolution stop watch covering a range of up to 340 msec. The measured time interval is determined as a separation between leading edges of a pair of pulses applied externally to the start input and the stop input of the digitizer. Employing an interpolation techniques and a 50 MHz high precision master oscillator, the equivalent of a 100 GHz clock frequency standard is achieved. Absolute accuracy and stability of the digitizer are determined by the external 50 MHz master oscillator, which serves as a standard time marker. The start and stop pulses are fast 1 nsec rise time signals, according to the Nuclear Instrument means of tunnel diode discriminators. Firing level of the discriminator define start and stop points between which the time interval is digitized.

Leskovar, B.↗
NASA NTRS1981

Department of Defense Precise Time and Time Interval program improvement plan

The United States Naval Observatory is responsible for ensuring uniformity in precise time and time interval operations including measurements, the establishment of overall DOD requirements for time and time interval, and the accomplishment of objectives requiring precise time and time interval with minimum cost. An overview of the objectives, the approach to the problem, the schedule, and a status report, including significant findings relative to organizational relationships, current directives, principal PTTI users, and future requirements as currently identified by the users are presented.

Bowser, J. R.↗
NASA NTRS1990

Nonlogarithmic magnetization relaxation at the initial time intervals and magnetic field dependence of the flux creep rate in Bi2Sr2Ca(sub I)Cu2Ox single crystals

At the initial time intervals, preceding the thermally activated flux creep regime, fast nonlogarithmic relaxation is found. The fully magnetic moment Pm(t) relaxation curve is shown. The magnetic measurements were made using SQUID-magnetometer. Two different relaxation regimes exist. The nonlogarithmic relaxation for the initial time intervals may be related to the viscous Abrikosov vortices flow with j is greater than j(sub c) for high enough temperature T and magnetic field induction B. This assumption correlates with Pm(t) measurements. The characteristic time t(sub O) separating two different relaxation regimes decreases as temperature and magnetic field are lowered. The logarithmic magnetization relaxation curves Pm(t) for fixed temperature and different external magnetic field inductions B are given. The relaxation rate dependence on magnetic field, R(B) = dPm(B, T sub O)/d(1nt) has a sharp maximum which is similar to that found for R(T) temperature dependences. The maximum shifts to lower fields as temperature goes up. The observed sharp maximum is related to a topological transition in shielding critical current distribution and, consequently, in Abrikosov vortices density. The nonlogarithmic magnetization relaxation for the initial time intervals is found. This fast relaxation has almost an exponentional character. The sharp relaxation rate R(B) maximum is observed. This maximum corresponds to a topological transition in Abrikosov vortices distribution.

Moshchalcov, V. V.↗
NASA NTRS1989

ISEE 3 observations during the CDAW 8 intervals - Case studies of the distant geomagnetic tail covering a wide range of geomagnetic activity

Observations made by the ISEE 3 spacecraft in the distant geomagnetic tail during the eight CDAW 8 intervals are discussed, along with their relation to concurrent geomagnetic activity. This extensive multiinstrument case study of distant tail data covers a wide range of geomagnetic conditions from extended intervals of magnetic quiet with isolated substorms to prolonged periods of intense disturbance. Plasmoids are observed in the distant tail following disturbance enhancements, the time of their appearance being generally consistent with disconnection from the near-earth region at the time of the enhancement. Their structure is entirely consistent with the neutral line model. However, not all enhancements in geomagnetic activity result in the observation of plasmoids. In particular, the CDAW 8 data suggest that, during extended intervals of strong activity, a continuous neutral line may reside in the near-earth tail and some disturbance enhancements may then relate to an increase in the reconnection rate at a preexisting neutral line, rather than to new neutral line and plasmoid formation.

Richardson, I. G.↗
NASA NTRS1989

Interval polynomial positivity

It is shown that a univariate interval polynomial is globally positive if and only if two extreme polynomials are globally positive. It is shown that the global positivity property of a bivariate interval polynomial is completely determined by four extreme bivariate polynomials. The cardinality of the determining set for k-variate interval polynomials is 2k. One of many possible generalizations, where vertex implication for global positivity holds, is made by considering the parameter space to be the set dual of a boxed domain.

Bose, N. K.↗
NASA NTRS1991

Boundary implications for frequency response of interval FIR and IIR filters

It is shown that vertex implication results in parameter space apply to interval trigonometric polynomials. Subsequently, it is shown that the frequency responses of both interval FIR and IIR filters are bounded by the frequency responses of certain extreme filters. The results apply directly in the evaluation of properties of designed filters, especially because it is more realistic to bound the filter coefficients from above and below instead of determining those with infinite precision because of finite arithmetic effects. Illustrative examples are provided to show how the extreme filters might be easily derived in any specific interval FIR or IIR filter design problem.

Bose, N. K.↗
NASA NTRS1992

Interval prediction in structural dynamic analysis

Methods for assessing the predictive accuracy of structural dynamic models are examined with attention given to the effects of modal mass, stiffness, and damping uncertainties. The methods are based on a nondeterministic analysis called 'interval prediction' in which interval variables are used to describe parameters and responses that are unknown. Statistical databases for generic modeling uncertainties are derived from experimental data and incorporated analytically to evaluate responses. Covariance matrices of modal mass, stiffness, and damping parameters are propagated numerically in models of large space structures by means of three methods. The test data tend to fall within the predicted intervals of uncertainty determined by the statistical databases. The present findings demonstrate the suitability of using data from previously analyzed and tested space structures for assessing the predictive accuracy of an analytical model.

Hasselman, Timothy K.↗
NASA NTRS1992

ISEE 3 plasmoid and TCR observations during an extended interval of substorm activity

On April 9-11, 1983, the ISEE 3 spacecraft was continuously located within the earth's magnetotail for more than 36 hours at downstream distances of X = -76 to -80 R(e). During this span of time, 12 major intervals of substorm activity were observed in the AL index with good ISEE 3 telemetry coverage for 11 of them. In addition, there were two small substorms outside of these intervals, both with complete observations in the distant tail. This unusual ISEE 3 data set provides a unique opportunity to test the predictions of the near-earth neutral line model. In particular, the hypothesis that energy stored in the tail lobes during the growth phase is later dissipated, in part, through the release of one or more plasmoids following expansion phase onset is examined. Clear growth phase enhancements in the lobe magnetic field intensity preceded the onsets of nine of the substorms. Plasmoids, or their lobe signatures, traveling compression regions (TCRs), were observed at ISEE 3 in association with all 11 of the major substorm intervals for which there were ISEE observations, as well as for the two small substorms. No plasmoids or TCRs were observed in the absence of substorm activity. If these ISEE 3 observations are representative, then the release of plasmoids down the tail may be a feature common to all substorms.

Slavin, J. A.↗
NASA NTRS1992

Stability margins for multilinear interval systems by way of phase conditions: A unified approach

A simple way of checking the stability with respect to an arbitrary stability region of a family of polynomials containing a vector of parameters varying within prescribed intervals is discussed. It is assumed that the parameters appear affine multilinearly in the characteristic polynomial coefficients. The condition proposed is simply to check the phase difference of the vertex polynomials. This test based on the mapping theorem significantly reduces computational complexity. Mathematical proofs are omitted. The results can be used to determine various stability margins of control systems containing interconnected interval subsystems. These include the gain, phase, time-delay, H(sup infinity), and nonlinear sector bounded stability margins of multilinear interval systems.

Keel, L. H.↗
NASA NTRS1992

Interval estimates for closure-phase and closure-amplitude imaging in radio astronomy

Interval estimates for closure-phase and closure-amplitude imaging that enable the reconstruction of a radioimage from results of approximate measurements are presented. If the intervals for the measured values are known, the precision of the result of the reconstruction cannot be solved by standard interval methods, because the phase value is based on a circle but not on a real line. If the phase theta (x bar) is measured with precision epsilon, so that the closure phase theta (x bar) + theta (y bar) - theta (x bar + y bar) is known with precision 3 epsilon, then from these measurements theta can be reconstructed with precision 6 epsilon. Similar estimates are given for closure amplitude.

Kreinovich, Vladik↗
NASA NTRS1999

Precision Interval Estimation of the Response Surface by Means of an Integrated Algorithm of Neural Network and Linear Regression

The integration of Radial Basis Function Networks and Back Propagation Neural Networks with the Multiple Linear Regression has been accomplished to map nonlinear response surfaces over a wide range of independent variables in the process of the Modem Design of Experiments. The integrated method is capable to estimate the precision intervals including confidence and predicted intervals. The power of the innovative method has been demonstrated by applying to a set of wind tunnel test data in construction of response surface and estimation of precision interval.

Lo, Ching F.↗