Search NASA⌕ Search

SEARCH · Search NASA

Results for “interval order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Magnetic dipole excitations in nuclei: Elementary modes of nucleonic motion

The nucleus is one of the most multifaceted many-body systems in the Universe. It exhibits a multitude of responses depending on the way one ''probes'' it. With increasing technical advancements of beams at the various accelerators and of detection systems the nucleus has, over and over again, surprised us by expressing always new ways of ''organized'' structures and layers of complexity. Nuclear magnetism is one of those fascinating faces of the atomic nucleus discussed in the present review. We shall not just limit ourselves to presenting the by now large data set that has been obtained in the past two decades using various probes, electromagnetic and hadronic alike and that presents ample evidence for a low-lying orbital scissors mode around 3 MeV, albeit fragmented over an energy interval of the order of 1.5 MeV, and higher-lying spin-flip strength in the energy region 5-9 MeV in deformed nuclei nor to the presently discovered evidence for low-lying proton-neutron isovector quadrupole excitations in spherical nuclei. To the contrary, the experimental evidence is put in the perspectives of understanding the atomic nucleus and its various structures of well-organized modes of motion and thus enlarges the discussion to more general fermion and bosonic many-body systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Subjective scaling of mental workload in a multi-task environment

Those factors in a multi-task environment that contribute to the operators' "sense" of mental workload were identified. The subjective judgment as conscious experience of mental effort was decided to be the appropriate method of measurement. Thurstone's law of comparative judgment was employed in order to construct interval scales of subjective mental workload from paired comparisons data. An experimental paradigm (Simulated Multi-Task Decision-Making Environment) was employed to represent the ideal experimentally controlled environment in which human operators were asked to "attend" to different cases of Tulga's decision making tasks. Through various statistical analyses it was found that, in general, a lower number of tasks-to-be-processed per unit time (a condition associated with longer interarrival times), results in a lower mental workload, a higher consistency of judgments within a subject, a higher degree of agreement among the subjects, and larger distances between the cases on the Thurstone scale of subjective mental workload. The effects of various control variables and their interactions, and the different characteristics of the subjects on the variation of subjective mental workload are demonstrated.

Daryanian, B.↗

Stellar clustering as induced by a supernova

A possible mechanism for the fragmentation of the expanding shock wave from a supernova to form stellar clusters is considered. A model of supernova shell expansion is constructed in which the ratio of magnetic field intensity to gas density remains constant during the one-dimensional compression of the interstellar medium by the shock, and the gas and field adjust to a quasi-equilibrium within the shell following shock passage. It is shown that the quasi-equilibrium, which may be considered as an isothermal atmosphere, is unstable to a hydromagnetic instability representing a form of the Parker instability, which results in a clumping of gas at intervals on the order of parsecs. The length and time scales of the instability are consistent with the clustering of newly formed stars observed in Canis Major R1, where there is evidence for supernova-induced star formation.

Baierlein, R.↗

The utilization of Spacelab

This paper describes the general characteristics of Spacelab and discusses its past, current, and planned utilization. To date, the major emphasis has focused on the development of the Spacelab hardware and on the first two flights. The experience gained from planning these early flights has shown that mixing disciplines with conflicting requirements on the same flight significantly compounds the complexity of the mission and leads to an inefficient use of the Spacelab and Shuttle resources. To minimize the complexity and to better utilize the Spacelab and Shuttle capabilities, a new utilization concept is being developed. This new concept, called 'Dedicated Discipline Labs', involves the grouping of scientifically compatible instruments into an appropriate carrier regularly flown at intervals on the order of six months to two years. The long term goal is to evolve many of these labs into low earth orbiting facilities for space stations.

Lester, R. C.↗

The ISEE-3 ULEWAT: Flux tape description and heavy ion fluxes 1978-1984

The ISEE ULEWAT FLUX tapes contain ULEWAT and ISEE pool tape data summarized over relatively long time intervals (1hr) in order to compact the data set into an easily usable size. (Roughly 3 years of data fit onto one 1600 BPI 9-track magnetic tape). In making the tapes, corrections were made to the ULEWAT basic data tapes in order to, remove rate spikes and account for changes in instrument response so that to a large extent instrument fluxes can be calculated easily from the FLUX tapes without further consideration of instrument performance.

Mason, G. M.↗

Magnetic reversals of Jupiter and Saturn

The possibility that the gas-giant planets Jupiter and Saturn undergo solar-type magnetic reversals is examined using dynamo theory and radiotelescope data on decametriic emissions from Jupiter. Possible values are found for the effects of the fluctuating velocity field, the magnetic diffusivity, and change in the rotation rate of a dynamo over a characteristic length. The radio emissions from Jupiter decreased in intensity from 1961-72 and rose steadily to the end of 1978, which could have been caused by a change in the Jovian magnetic field. Since Jupiter may have a small rocky core embedded in metallic hydrogen which comprises 75 percent of the radius of the planet, the planetary magnetic field may extend into the cores of its satellites. The dynamo characteristics, like those of Saturn, would be chaotic, although quasi-periodic reversals could occur over intervals on the order of centuries instead of decades such as with the sun and much longer periods such as with the earth.

Hathaway, D. H.↗

Single-state selection system for hydrogen masers

The design and operation of a single-state selection system based on the adiabatic fast-passage technique for atomic state inversion is described. The system uses a variable-pitch dc solenoid and orthogonal four-wire RF coil to create the state-changing magnetic fields, and a half-wavelength state selection magnet to remove the inverted state atoms from the hydrogen beam. The system's performance was determined by measuring maser power as a function of line Q. The system removes more than 85 percent of undesired atoms from the beam. The potential effects of improvements in the maser on its frequency stability have been calculated. The use of single-state selection combined with increased RF coupling to the cavity and increased storage bulb collimation offers the possibility of frequency stability in the 10 to the -17th regime over intervals on the order of 60,000 s.

Mattison, Edward M.↗

Magnetic activity complexes, thermal relaxation oscillations, and the dynamics of the azimuthal magnetic field of a star

The large amount of magnetic flux cycling through an activity complex in a period of six months suggests that the azimuthal magnetic field in the convective zone of the sun is not less than 3000 Gauss and probably is considerably more. A field of 3 kiloGauss or more has the effect of blocking the convective heat transport, producing a cool shadow above the azimuthal field and causing heat to accumulate below. The incremental weight of the cool shadow is sufficient to overpower the magnetic buoyancy, pressing the field against the bottom of the convective zone. The accumulation of heat underneath produces a thermal relaxation oscillation that erupts to the surface at intervals of the order of a week, supplying the intermittent emergence of magnetic flux observed in the activity complex.

Parker, E. N.↗

Sm-Nd age of the Fiskenaesset Anorthosite Complex, West Greenland

A Sm-Nd isotopic study on samples from the Fiskenaesset Anorthosite Complex in West Greenland was conducted to estimate the age of crystallization of the complex. A five-point isochron, including data for whole-rock samples of anorthosite, metagabbro, metaperidotite, and separates of calcic plagioclase and mafic matrix from a coarse megacrystic leucogabbro, corresponds to an age of 2.86 + or - 0.05 Ga, with initial sigma(Nd) of +2.9 + or - 0.4. This implies a relatively short time interval, on the order of 70 Ma, during which anorthosite formation, tonalite emplacement, and high-grade metamorphism took place.

Ashwal, Lewis D.↗

High-Speed Observer: Automated Streak Detection in SSME Plumes

A high frame rate digital video camera installed on test stands at Stennis Space Center has been used to capture images of Space Shuttle main engine plumes during test. These plume images are processed in real time to detect and differentiate anomalous plume events occurring during a time interval on the order of 5 msec. Such speed yields near instantaneous availability of information concerning the state of the hardware. This information can be monitored by the test conductor or by other computer systems, such as the integrated health monitoring system processors, for possible test shutdown before occurrence of a catastrophic engine failure.

Rieckoff, T. J.↗

NASA Langley's Approach to the Sandia's Structural Dynamics Challenge Problem

The objective of this challenge is to develop a data-based probabilistic model of uncertainty to predict the behavior of subsystems (payloads) by themselves and while coupled to a primary (target) system. Although this type of analysis is routinely performed and representative of issues faced in real-world system design and integration, there are still several key technical challenges that must be addressed when analyzing uncertain interconnected systems. For example, one key technical challenge is related to the fact that there is limited data on target configurations. Moreover, it is typical to have multiple data sets from experiments conducted at the subsystem level, but often samples sizes are not sufficient to compute high confidence statistics. In this challenge problem additional constraints are placed as ground rules for the participants. One such rule is that mathematical models of the subsystem are limited to linear approximations of the nonlinear physics of the problem at hand. Also, participants are constrained to use these models and the multiple data sets to make predictions about the target system response under completely different input conditions. Our approach involved initially the screening of several different methods. Three of the ones considered are presented herein. The first one is based on the transformation of the modal data to an orthogonal space where the mean and covariance of the data are matched by the model. The other two approaches worked solutions in physical space where the uncertain parameter set is made of masses, stiffnesses and damping coefficients; one matches confidence intervals of low order moments of the statistics via optimization while the second one uses a Kernel density estimation approach. The paper will touch on all the approaches, lessons learned, validation 1 metrics and their comparison, data quantity restriction, and assumptions/limitations of each approach. Keywords: Probabilistic modeling, model validation, uncertainty quantification, kernel density

Horta, Lucas G.↗

Creep Forming of Carbon-Reinforced Ceramic-Matrix Composites

A set of lecture slides describes an investigation of creep forming as a means of imparting desired curvatures to initially flat stock plates of carbon-reinforced ceramic-matrix composite (C-CMC) materials. The investigation is apparently part of a continuing effort to develop improved means of applying small CCMC repair patches to reinforced carbon-carbon leading edges of aerospace vehicles (e.g., space shuttles) prior to re-entry into the atmosphere of the Earth. According to one of the slides, creep forming would be an intermediate step in a process that would yield a fully densified, finished C-CMC part having a desired size and shape (the other steps would include preliminary machining, finish machining, densification by chemical vapor infiltration, and final coating). The investigation included experiments in which C-CMC disks were creep-formed by heating them to unspecified high temperatures for time intervals of the order of 1 hour while they were clamped into single- and double-curvature graphite molds. The creep-formed disks were coated with an oxidation- protection material, then subjected to arc-jet tests, in which the disks exhibited no deterioration after exposure to high-temperature test conditions lasting 490 seconds.

Vaughn, Wallace L.↗

Solution-Assisted Optical Contacting

A modified version of a conventional optical-contact procedure has been found to facilitate alignment of optical components. The optical-contact procedure (called simply optical contacting in the art) is a standard means of bonding two highly polished and cleaned glass optical components without using epoxies or other adhesives. In its unmodified form, the procedure does not involve the use of any foreign substances at all: components to be optically contacted are dry. The main disadvantage of conventional optical contacting is that it is difficult or impossible to adjust the alignment of the components once they have become bonded. In the modified version of the procedure, a drop of an alcohol-based optical cleaning solution (isopropyl alcohol or similar) is placed at the interface between two components immediately before putting the components together. The solution forms a weak bond that gradually strengthens during a time interval of the order of tens of seconds as the alcohol evaporates. While the solution is present, the components can be slid, without loss of contact, to perform fine adjustments of their relative positions. After about a minute, most of the alcohol has evaporated and the optical components are rigidly attached to each other. If necessary, more solution can be added to enable resumption or repetition of the adjustment until the components are aligned to the required precision.

Shaddock, Daniel↗

High speed spectroscopy using temporal positioned optical fibers with an optical scanner mirror

Systems and methods for examining spectral data over the course of a high speed event are described. The systems and methods can enable observation of the spectral evolution of a transient phenomenon into segment intervals on the order of, milliseconds or microseconds. The methods include reflecting light from an event off of a rotating mirror and sequentially delivering light from the mirror to a series of optical waveguides for sequential spectral analysis. The systems and methods can be useful in a wide variety of applications such as, LIBS applications; examination of high energy devices such as explosions or simulations of explosions; examination of deposition processes, e.g., coating formations; examination of chemical reactions; etc.

47 OTHER INSTRUMENTATION↗

Central Difference Interval Method for Solving the Wave Equation

This paper presents path of construction the interval method of second order for solving the wave equation. Taken into consideration is the central difference interval method for one-dimensional partial differential equation. Numerical results, obtained by two presented algorithms, in floating-point interval arithmetic are considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Proper orthogonal decomposition based reduced-order modeling of flux-Limited gray thermal radiation

Here, in this work, a proper orthogonal decomposition (POD) based reduced-order model (ROM) is developed to solve gray, flux-limited thermal radiation diffusion. We focus on the variable opacity radiation penetration benchmark posed by Olson, Auer, and Hall. The T -3 relationship for opacity in conjunction with high-temperature radiation penetrating an initially cold material produces a strong thermal radiation shock. This class of problems is particularly challenging for standard POD-based reduced-order modeling due to the nonlinearities presented by 1) the T 4 source term, and 2) flux-limited diffusion operator. To address these challenges and develop a cost competitive ROM, we employ a “hyper-reduction” technique through discrete empirical interpolation (DEIM) and allow for adaptive reduced-order projections through principal interval decomposition (PID). Performance of the proposed methodology is quantified by comparing the cost savings and accuracy relative to a full-order computation. Reference solutions and snapshot data are obtained through a full-order calculation performed by the University of Chicago maintained astrophysics code, FLASH. For consistency and potential extensibility, the developed ROM is also implemented in FLASH. We find that in the initialization regime, where the thermal radiation wave is initially created by the warming of the material, this class of problems is highly reducible and suitable for POD-based ROMs. However, the strong convective nature of the wave propagation regime is less reducible and more challenging to create an efficient ROM.

42 ENGINEERING↗

Quantifying the statistical complexity of low-frequency fluctuations in semiconductor lasers with optical feedback

Low-frequency fluctuations (LFFs) represent a dynamical instability that occurs in semiconductor lasers when they are operated near the lasing threshold and subject to moderate optical feedback. LFFs consist of sudden power dropouts followed by gradual, stepwise recoveries. We analyze experimental time series of intensity dropouts and quantify the complexity of the underlying dynamics employing two tools from information theory, namely, Shannon's entropy and the Martin, Plastino, and Rosso statistical complexity measure. These measures are computed using a method based on ordinal patterns, by which the relative length and ordering of consecutive interdropout intervals (i.e., the time intervals between consecutive intensity dropouts) are analyzed, disregarding the precise timing of the dropouts and the absolute durations of the interdropout intervals. We show that this methodology is suitable for quantifying subtle characteristics of the LFFs, and in particular the transition to fully developed chaos that takes place when the laser's pump current is increased. Our method shows that the statistical complexity of the laser does not increase continuously with the pump current, but levels off before reaching the coherence collapse regime. This behavior coincides with that of the first- and second-order correlations of the interdropout intervals, suggesting that these correlations, and not the chaotic behavior, are what determine the level of complexity of the laser's dynamics. These results hold for two different dynamical regimes, namely, sustained LFFs and coexistence between LFFs and steady-state emission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗