Search NASA⌕ Search

SEARCH · Search NASA

Results for “inverter availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Directional and polarimetric effects in the optical domain

Papers focused on land surface, atmospheric, and ocean properties are reported. Specific comments pertaining to polarization, models and inversion, and measurements, are given. Recommendations are: continued research into the application potential of the BRDF (Bidirectional Reflectance Distribution Function) and polarization properties of ground surface and atmospheric targets; three dimensional models, which account for the statistical behavior of remotely sensed data, should be extended and inverted in order to support analysis of data potentially covering rolling terrain such that pixels represent heterogeneous mixtures of surface cover types and project ground footprints with sizes between 10 to 6 km, the ground pixel sizes of planned future sensors; available reflectance models should be further validated by means of multi dimensional (directional, spectral, temporal) field data and existing models should be intercompared in more depth to evaluate their performance and limitations; existing methods for model inversion should be validated in more depth in order to quantify the practical limitations and the expected accuracy of the parameters retrieved and new approaches should be developed based upon apriori knowledge of plant canopy development and spectral BRDF properties; there is a need to establish a protocol of validation and intercomparison of the indices and compositing techniques which have been proposed during these last years.

Vanderbilt, V. C.↗
NASA NTRS1998

RADARSAT Underflights: Comparison of C-band VV and HH Backscatter-Wind Retrieval

The primary objective of this grant was to validate the modified CMOD4 wind speed algorithm used to invert RADARSAT data. We proposed to do the following: TASK 1: Participate in at least two underflights of RADARSAT (collecting backscatter measurements with the UMASS C-band and Ku-band scatterometers, CSCAT and KUSCAT. TASK 2: Process data gathered with CSCAT and KUSCAT into one kilometer along-track pixels with each pixel consisting of seventy-two five degree azimuth bins - each bin containing normalized radar cross section (NRCS) values for that particular azimuth angle and for each of the four incidence angles viewed by CSCAT and KUSCAT. Derive wind speed and direction estimates from each NRCS along-track pixel using CMOD4 and NSCAT models. TASK 3: Compare collocated CSCAT vertically polarized (VV) and RADARSAT horizontally polarized (HH) NRCS data and wind estimates, and based on the comparison, evaluate the performance of the modified CMOD4 wind speed algorithm to invert RADARSAT NRCS measurements. The first two tasks were completed. The third task is still on-going since the RADARSAT data for the underflights has not been released to the University of Massachusetts. We expect that the RADARSAT data will become available in the next few months, and we will complete the third task in a promptly manner once the data has been received. Below the missions flown and the data collected are summarized. Two missions, based out of the NASA Wallops Flight Facility, were flown. The first flight was on 21 September 1997 and the second on 24 September 1997. The time for each mission was approximately 2 hours. Figure 1 plots the flight tracks and marks the location of the NOAA buoys that were in the vicinity.

Source record↗
NASA NTRS1979

Description of a 2.3 kW power transformer for space applications

The principle features and special testing of a high voltage high power transformer designed and developed for space application are described. The transformer is operated in a series resonant inverter supplying beam power to a 30 cm mercury ion thruster. Electrical requirements include operation of 2.3 kW continuous power output, primary currents to 35 amps rms, and frequencies up to 20 kHz. High efficiency was obtained through detailed considerations of the tradeoffs available in core materials, wire selection, coil configurations and thermal control. A number of novel heat removal techniques are discussed which control the winding temperature using only the available conductive cooling.

Hansen, I.↗
NASA NTRS1982

Satellite observations of suprathermal electron bursts

Data from the ISIS 2 satellite are used to study the spatial distribution of the suprathermal electron bursts discovered by high-altitude sounding rockets. It is found that the bursts form an integral part of the boundary plasma sheet and are linked with the formation of discrete auroral arcs. The maximum energy of the bursts is always below the peak energy in neighboring discrete forms, and it appears that if the bursts fail to reach the minimum energy found to be necessary to sustain a discrete arc they collapse within a few seconds. It is suggested that in a pass across the auroral oval the overall envelope of the maximum energy in bursts and the peak energy in discrete auroral forms reflect the variation of the available acceleration (perhaps a parallel electric potential) across the auroral oval while the energy structure in individual forms is a function of the nonlinear processes which sustain them. This explanation appears to resolve the apparent discrepancy in scale thickness between rocket and satellite inverted V's.

Johnstone, A. D.↗
NASA NTRS2020

A Path Towards Quantum Advantage in Training Deep Generative Models with Quantum Annealing

A class of quantum-classical hybrid machine-learning algorithms can be obtained by integrating classical deep generative models with quantum probability distributions as 'priors' over their latent variables. We introduce a hybrid implementation of variational autoencoders (QVAE) and also present a technique to hybridize flow-based invertible generative models. We demonstrate the use of D-Wave quantum annealers as physical simulators of quantum Boltzmann machines (QBM) to perform quantum-assisted training of QVAE. Latent-space QBM develop slowly mixing modes, opening a path to obtain quantum advantage in generative modeling with available quantum devices.

Vinci, Walter↗
NASA NTRS1972

Statistical versus nonstatistical temperature inversion methods

Vertical temperature profiles are derived from radiation measurements by inverting the integral equation of radiative transfer. Because of the nonuniqueness of the solution, the particular temperature profile obtained depends on the numerical inversion technique used and the type of auxiliary information incorporated in the solution. The choice of an inversion algorithm depends on many factors; including the speed and size of computer, the availability of representative statistics, and the accuracy of initial data. Results are presented for a numerical study comparing two contrasting inversion methods: the statistical-matrix inversion method and the nonstatistical-iterative method. These were found to be the most applicable to the problem of determining atmospheric temperature profiles. Tradeoffs between the two methods are discussed.

Smith, W. L.↗
NASA NTRS1994

Composite hot drape forming

This program was initiated to replace labor-intensive ply-by-ply layup of composite I-beam posts and angle stiffeners used in the Space Station Freedom (SSF) rack structure. Hot drape forming (HDF) has been successfully implemented by BCAG for 777 composite I-stringers and by Bell Helicopter/Textron for the V-22 I-stingers. The two companies utilize two vastly different approaches to the I-beam fabrication process. A drape down process is used by Bell Helicopter where the compacted ply charge is placed on top of a forming mandrel and heated. When the heated ply charge reached a set temperature, vacuum pressure is applied and the plies are formed over the mandrel. The BCAG 777 process utilizes an inverted forming process where the ply stack is placed on a forming table and the mandrel is inverted and placed upon the ply stack. A heating and vacuum bladder underneath the ply stack form the play stack up onto the mandrels after reaching the temperature setpoint. Both methods have their advantages, but the drape down process was selected for SSF because it was more versatile and could be fabricated from readily available components.

Ott, Thomas↗
NASA NTRS2010

Can Vertical Profiles of Tropospheric Methane on Titan Be Derived from Radio-Occultation Soundings?

The intensity of the received signal at Earth in the radio occultations of Titan is attenuated both by refractive defocusing and pressure-induced absorption from N2-N2 and CH4-N2 pairs. Because the absorption strength is different for the two sets of pairs, matching the retrieved absorptivity profile can in principle yield the vertical variation in gaseous methane in the troposphere. There are two factors that make this difficult. The first is the propagation of noise in the phase and amplitude of the received signal in the absorption retrieval. The phase data is first inverted to retrieve vertical profiles of refractivity, from which the refractive defocusing is calculated. This is then subtracted from the observed. intensity attenuation of the received signal to generate a profile of atmospheric absorption. The second problem is the uncertainty in the pressure-induced absorption coefficients. Laboratory data at radio wavelengths is only available near room temperature (see, e.g., [1] for N2-N2), and the extrapolation to the low temperatures in Titan's troposphere is not well established. Ab initio calculations by Borysow et al. [2, 3] provide absorption coefficients at low temperatures and long wavelengths, but their accuracy has come into question. We present examples from Cassini radio occultations of Titan to illustrate the difficulties. For methane mole fractions in the lower troposphere comparable to that inferred from the Huygens probe (approximately 0.05), it will be difficult to separate the contributions of N2-N2 collisions from those of N2-CH4, collisions to the retrieved absorption. However, higher concentrations of CH4 and/or a higher signal-to-noise ratio from a future uplink experiment could result in a successful separation of the two components. However, key to this are highly accurate estimates of the absorption from a combination of laboratory measurements at love temperatures and long wavelengths, and possibly improved theoretical calculations.

Flasar, F. Michael↗
NASA NTRS1975

Application of Fourier transforms for microwave radiometric inversions

Existing microwave radiometer technology now provides a suitable method for remote determination of the ocean surface's absolute brightness temperature. To extract the brightness temperature of the water from the antenna temperature, an unstable Fredholm integral equation of the first kind is solved. Fourier transform techniques are used to invert the integral after it is placed into a cross correlation form. Application and verification of the methods to a two-dimensional modeling of a laboratory wave tank system are included. The instability of the ill-posed Fredholm equation is examined and a restoration procedure is included which smooths the resulting oscillations. With the recent availability and advances of fast Fourier transform (FFT) techniques, the method presented becomes very attractive in the evaluation of large quantities of data.

Holmes, J. J.↗
NASA NTRS1972

An analysis of the light curve of Pluto.

The light curve of Pluto is analyzed in terms of a geometrical model consisting of bright and dark areas which are assumed to exhibit either a diffuse or a geometrical type of reflectivity. A Fourier analysis method is used to invert the observed light curve to obtain the longitudinal distribution of bright and dark areas for any combination of albedos selected for the two types of terrain. The analysis indicates that the light curve of Pluto can be readily understood in terms of a surface consisting of bright and dark areas. However, on the basis of the presently available photometric data, the existence or absence of limb-darkened material cannot be established.

Lacis, A. A.↗
NASA NTRS1990

Control of multiple resonant power processors in a multi-source system

Analysis and test results show that phasor-regulated, Mapham-derived resonant inverters can be paralleled to provide standardizing interfaces for multiple sources on a utility-type, aerospace power distribution bus. The basic sources do not require matching in any way, and may have grossly different characteristics. Fully stable system architectures with multiple sources, parallel/redundant distribution buses, and a wide variety of loads can be easily constructed and controlled. The commands and parameters available for system control allow for tight tolerance bus voltage control, and absolute power-sharing control from the various sources over the full range of possible source and load variations. That level of control enables simplified load power processing hardware and the distribution of losses to optimally load the source thermal control system. Positive control of all system performance and allocation of losses are not required by all missions or vehicles, and overall vehicle considerations do not always require the loads on vehicle energy sources and thermal control systems to be balanced. In those cases, power system control can be simplified, and a hierarchical set of defaults can be substituted for computer-generated or supervisory input commands to allow for stable, fully autonomous system operation.

Mildice, James↗
NASA NTRS2011

L Band Brightness Temperature Observations Over a Corn Canopy During the Entire Growth Cycle

During a field campaign covering the 2002 corn growing season, a dual polarized tower mounted L-band (1.4 GHz) radiometer (LRAD) provided brightness temperature (T(sub B)) measurements at preset intervals, incidence and azimuth angles. These radiometer measurements were supported by an extensive characterization of land surface variables including soil moisture, soil temperature, vegetation biomass, and surface roughness. During the period from May 22, 2002 to August 30, 2002 a range of vegetation water content (W) of 0.0 to 4.3 kg/square m, ten days of radiometer and ground measurements were available. Using this data set, the effects of corn vegetation on surface emissions are investigated by means of a semi-empirical radiative transfer model. Additionally, the impact of roughness on the surface emission is quantified using T(sub B) measurements over bare soil conditions. Subsequently, the estimated roughness parameters, ground measurements and horizontally (H)-polarized T(sub B) are employed to invert the H-polarized transmissivity (gamma-h) for the monitored corn growing season.

Joseph, Alicia T.↗
NASA NTRS1979

Preliminary noise tradeoff study of a Mach 2.7 cruise aircraft

NASA computer codes in the areas of preliminary sizing and enroute performance, takeoff and landing performance, aircraft noise prediction, and economics were used in a preliminary noise tradeoff study for a Mach 2.7 design supersonic cruise concept. Aerodynamic configuration data were based on wind-tunnel model tests and related analyses. Aircraft structural characteristics and weight were based on advanced structural design methodologies, assuming conventional titanium technology. The most advanced noise prediction techniques available were used, and aircraft operating costs were estimated using accepted industry methods. The 4-engines cycles included in the study were based on assumed 1985 technology levels. Propulsion data was provided by aircraft manufacturers. Additional empirical data is needed to define both noise reduction features and other operating characteristics of all engine cycles under study. Data on VCE design parameters, coannular nozzle inverted flow noise reduction and advanced mechanical suppressors are urgently needed to reduce the present uncertainties in studies of this type.

Mascitti, V. R.↗
NASA NTRS2014

Aerosol Properties Derived from Airborne Sky Radiance and Direct Beam Measurements in Recent NASA and DoE Field Campaigns

The AERONET (AErosol RObotic NETwork) ground-based suite of sunphotometers provides measurements of spectral aerosol optical depth (AOD), precipitable water and spectral sky radiance, which can be inverted to retrieve aerosol microphysical properties that are critical to assessments of aerosol-climate interactions. Because of data quality criteria and sampling constraints, there are significant limitations to the temporal and spatial coverage of AERONET data and their representativeness for global aerosol conditions.The 4STAR (Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research) instrument, jointly developed by NASA Ames and PNNL (Pacific Northwest National Laboratory) with NASA Goddard collaboration, combines airborne sun tracking and AERONET-like sky scanning with spectroscopic detection. Being an airborne instrument, 4STAR has the potential to fill gaps in the AERONET data set. The 4STAR instrument operated successfully in the SEAC4RS (Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys) experiment in Aug./Sep. 2013 aboard the NASA DC-8 and in the DoE (Department of Energy)-sponsored TCAP (Two Column Aerosol Project, July 2012 & Feb. 2013) experiment aboard the DoE G-1 aircraft. 4STAR provided direct beam measurements of hyperspectral AOD, columnar trace gas retrievals (H2O, O3, NO2), and the first ever airborne hyperspectral sky radiance scans, which can be inverted to yield the same products as AERONET ground-based observations. In this presentation, we provide an overview of the new 4STAR capabilities, with an emphasis on 26 high-quality sky radiance measurements carried out by 4STAR in SEAC4RS. We compare collocated 4STAR and AERONET sky radiances, as well as their retrievals of aerosol microphysical properties for a subset of the available case studies. We summarize the particle property and air-mass characterization studies made possible by the combined 4STAR direct beam and sky radiance observations.

DoE↗
NASA NTRS1993

Fault-Tree Compiler

Fault-Tree Compiler (FTC) program, is software tool used to calculate probability of top event in fault tree. Gates of five different types allowed in fault tree: AND, OR, EXCLUSIVE OR, INVERT, and M OF N. High-level input language easy to understand and use. In addition, program supports hierarchical fault-tree definition feature, which simplifies tree-description process and reduces execution time. Set of programs created forming basis for reliability-analysis workstation: SURE, ASSIST, PAWS/STEM, and FTC fault-tree tool (LAR-14586). Written in PASCAL, ANSI-compliant C language, and FORTRAN 77. Other versions available upon request.

Butler, Ricky W.↗
NASA NTRS1958

Aerodynamic Performance and Static Stability and Control of Flat-Top Hypersonic Gliders at Mach Numbers from 0.6 to 18

A study is made of aerodynamic performance and static stability and control at hypersonic speeds. In a first part of the study, the effect of interference lift is investigated by tests of asymmetric models having conical fuselages and arrow plan-form wings. The fuselage of the asymmetric model is located entirely beneath the wing and has a semicircular cross section. The fuselage of the symmetric model was centrally located and has a circular cross section. Results are obtained for Mach numbers from 3 to 12 in part by application of the hypersonic similarity rule. These results show a maximum effect of interference on lift-drag ratio occurring at Mach number of 5, the Mach number at which the asymmetric model was designed to exploit favorable lift interference. At this Mach number, the asymmetric model is indicated to have a lift-drag ratio 11 percent higher than the symmetric model and 15 percent higher than the asymmetric model when inverted. These differences decrease to a few percent at a Mach number of 12. In the course of this part of the study, the accuracy to the hypersonic similarity rule applied to wing-body combinations is demonstrated with experimental results. These results indicate that the rule may prove useful for determining the aerodynamic characteristics of slender configurations at Mach numbers higher than those for which test equipment is really available. In a second part of the study, the aerodynamic performance and static stability and control characteristics of a hypersonic glider are investigated in somewhat greater detail. Results for Mach numbers from 3 to 18 for performance and 0.6 to 12 for stability and control are obtained by standard text techniques, by application of the hypersonic stability rule, and/or by use of helium as a test medium. Lift-drag ratios of about 5 for Mach numbers up to 18 are shown to be obtainable. The glider studied is shown to have acceptable longitudinal and directional stability characteristics through the range of Mach numbers studied. Some roll instability (negative effective dihedral) is found at Mach numbers near 12.

Syvertson, Clarence A↗
NASA NTRS2014

Analytical Model for Steady Flow through a Finite Channel with One Porous Wall with Arbitrary Variable Suction or Injection

This paper presents an exact solution of two-dimensional laminar flow through a finite length channel with one porous wall. It improves upon previous solutions by (1) satisfying the no-slip boundary condition at the channel dead end, (2) adding a turbulent term to the porous wall boundary condition, (3) allowing for arbitrary variable suction or injection across the porous wall, and (4) model validation against new cryogenic liquid hydrogen and oxygen experimental data. Of particular interest in the current work is the modeling of cryogenic propellant flow through a porous liquid acquisition device (LAD) screen and channel inside a propellant tank. First, a detailed review of the literature is presented for previously attempted solutions to channel flow with one porous wall. Next, the governing equations, boundary conditions, and model assumptions are used to derive the analytical flow solution and present general model results for pressure and velocity fields within the channel. Then, the model solution is compared with horizontal LAD channel flow data in liquid oxygen as well as vertical LAD channel flow data in an inverted outflow configuration in liquid hydrogen. Model results are used to update the static cryogenic bubble point pressure model with a dynamic bubble point term which factors in enhanced convection and cooling at the screen during propellant outflow. Convective heat transfer at the LAD screen during outflow is also quantified by comparing model and data. The new analytical flow solution with the dynamic bubble point model is shown to compare well with available cryogenic experimental data

Navier Stokes Equations↗
NASA NTRS1986

On strategies for inverting remote sensing data

Attention is given to a number of methods for inverting remote sensing data obtained in a variety of astronomical applications. Applications include image restoration, inversion of helioseismological data to obtain the internal rotation rate of stars such as the sun, fitting of spectra (especially thermal line spectra) to grating or other dispersed observed spectra, differential emission measure analysis, and reconstruction of images derived from interferometric observations. The results consider the tradeoff between resolution and variance and the stability properties for each method and propose an inversion stragegy using the available techniques.

Jeffrey, W.↗