SEARCH · Search NASA

Results for “isolate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Coxsackievirus B4 sewage-isolate induces pancreatitis after oral infection of mice

ABSTRACT Numerous serotypes which belong to the genus Enterovirus (EV) show variability in their virulence and clinical manifestations. They are also known to undergo changes caused by mutations and recombination during their circulation in the environment and the population. Various EV serotypes are prevalent in groundwater, wastewater and surface waters. Our previous studies showed that oral infection induces pancreatitis depending on specific conditions, such as gravidity, in an outbred murine model. Our aim in the present study was to further explore the pancreatic histopathology in an outbred mouse model following oral infection with clinical isolates from a patient who had aseptic meningitis and an isolate from a treated-sewage sample recovered from the residential area of the patient. The isolates were identified as coxsackievirus B4 (CVB4) in tissue culture. The CVB4 sewage-isolate induced pancreatitis after oral infection. In contrast, pancreatitis was absent following infection with the clinical isolates. Comparison of polyprotein sequences showed that the treated-sewage strains differed from the patient's isolates by 9 and 11 amino acids. We conclude that the isolates of clinical and environmental origin differed in their pathogenic properties and showed genetic variation.

Benkoova, Brigita↗

DOE OSTI2020

Impact of Soil Salinity on the Cowpea Nodule-Microbiome and the Isolation of Halotolerant PGPR Strains to Promote Plant Growth under Salinity Stress

Cowpea is one of the major legumes cultivated in arid and semiarid regions of the world. Four soil-microbial samples (SS-1 through SS-4) collected from semiarid soils in Punjab, Pakistan were planted with cowpea (Vigna unguiculata) crops, which were grown under salinity stress to analyze bacterial composition in the rhizosphere and within nodules using cultivation-dependent and -independent methods. Two varieties, 603 and the salt-tolerant CB 46, were each inoculated with or without the four different native soil samples or grown in medium either N-deficient (-N) or supplemented with N (+N). Plants inoculated with soil samples SS-2 and SS-4 grew better than plants inoculated with SS-1- and SS-3 and grew comparably with the +N controls. Environmental DNA (eDNA) was isolated from SS-1 and SS-4, and, by 16S ribosomal RNA sequencing, the soil microbiomes consisted mainly of Actinobacteria, Firmicutes, Proteobacteria, and other nonproteobacterial genera. However, analysis of eDNA isolated from cowpea nodules established by the trap plants showed that the nodule microbiome consisted almost exclusively of proteobacterial sequences, particularly species of Bradyrhizobium. Bacteria were isolated from both soils and nodules, and 34 of the 51 isolates tested positive for plant-growth-promoting rhizobacteria traits in plate assays. Many could serve as future inocula for crops in arid soils. The discrepancy between the types of bacteria isolated by culturing bacteria isolated from surface-sterilized cowpea nodules (proteobacteria and nonproteobacteria) versus those detected by sequencing DNA isolated from the nodules (proteobacteria) from cowpea nodules (proteobacteria and nonproteobacteria) versus those detected in the nodule microbiome (proteobacteria) needs further study.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Genomic analysis of 1710 surveillance-based Neisseria gonorrhoeae isolates from the USA in 2019 identifies predominant strain types and chromosomal antimicrobial-resistance determinants

This study characterized high-quality whole-genome sequences of a sentinel, surveillance-based collection of 1710 Neisseria gonorrhoeae (GC) isolates from 2019 collected in the USA as part of the Gonococcal Isolate Surveillance Project (GISP). It aims to provide a detailed report of strain diversity, phylogenetic relationships and resistance determinant profiles associated with reduced susceptibilities to antibiotics of concern. The 1710 isolates represented 164 multilocus sequence types and 21 predominant phylogenetic clades. Common genomic determinants defined most strains’ phenotypic, reduced susceptibility to current and historic antibiotics (e.g. bla TEM plasmid for penicillin, tetM plasmid for tetracycline, gyrA for ciprofloxacin, 23S rRNA and/or mosaic mtr operon for azithromycin, and mosaic penA for cefixime and ceftriaxone). The most predominant phylogenetic clade accounted for 21 % of the isolates, included a majority of the isolates with low-level elevated MICs to azithromycin (2.0 µg ml –1 ), carried a mosaic mtr operon and variants in PorB, and showed expansion with respect to data previously reported from 2018. The second largest clade predominantly carried the GyrA S91F variant, was largely ciprofloxacin resistant (MIC ≥1.0 µg ml –1 ), and showed significant expansion with respect to 2018. Overall, a low proportion of isolates had medium- to high-level elevated MIC to azithromycin ((≥4.0 µg ml –1 ), based on C2611T or A2059G 23S rRNA variants). One isolate carried the penA 60.001 allele resulting in elevated MICs to cefixime and ceftriaxone of 1.0 µg ml –1 . This high-resolution snapshot of genetic profiles of 1710 GC sequences, through a comparison with 2018 data (1479 GC sequences) within the sentinel system, highlights change in proportions and expansion of select GC strains and the associated genetic mechanisms of resistance. The knowledge gained through molecular surveillance may support rapid identification of outbreaks of concern. Continued monitoring may inform public health responses to limit the development and spread of antibiotic-resistant gonorrhoea.

(3-6) antimicrobial resistance↗

DOE OSTI2020

A Genome-Based Model to Predict the Virulence of Pseudomonas aeruginosa Isolates

ABSTRACT: Variation in the genome of Pseudomonas aeruginosa , an important pathogen, can have dramatic impacts on the bacterium’s ability to cause disease. We therefore asked whether it was possible to predict the virulence of P. aeruginosa isolates based on their genomic content. We applied a machine learning approach to a genetically and phenotypically diverse collection of 115 clinical P. aeruginosa isolates using genomic information and corresponding virulence phenotypes in a mouse model of bacteremia. We defined the accessory genome of these isolates through the presence or absence of accessory genomic elements (AGEs), sequences present in some strains but not others. Machine learning models trained using AGEs were predictive of virulence, with a mean nested cross-validation accuracy of 75% using the random forest algorithm. However, individual AGEs did not have a large influence on the algorithm’s performance, suggesting instead that virulence predictions are derived from a diffuse genomic signature. These results were validated with an independent test set of 25 P. aeruginosa isolates whose virulence was predicted with 72% accuracy. Machine learning models trained using core genome single-nucleotide variants and whole-genome k-mers also predicted virulence. Our findings are a proof of concept for the use of bacterial genomes to predict pathogenicity in P. aeruginosa and highlight the potential of this approach for predicting patient outcomes. IMPORTANCE Pseudomonas aeruginosa is a clinically important Gram-negative opportunistic pathogen. P. aeruginosa shows a large degree of genomic heterogeneity both through variation in sequences found throughout the species (core genome) and through the presence or absence of sequences in different isolates (accessory genome). P. aeruginosa isolates also differ markedly in their ability to cause disease. In this study, we used machine learning to predict the virulence level of P. aeruginosa isolates in a mouse bacteremia model based on genomic content. We show that both the accessory and core genomes are predictive of virulence. This study provides a machine learning framework to investigate relationships between bacterial genomes and complex phenotypes such as virulence.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Comparative genomic and phenotypic characterization of invasive non-typhoidal Salmonella isolates from Siaya, Kenya

Non-typhoidal Salmonella (NTS) is a major global health concern that often causes bloodstream infections in areas of the world affected by malnutrition and comorbidities such as HIV and malaria. Developing a strategy to control the emergence and spread of highly invasive and antimicrobial resistant NTS isolates requires a comprehensive analysis of epidemiological factors and molecular pathogenesis. Here, we characterize 11 NTS isolates that caused bloodstream infections in pediatric patients in Siaya, Kenya from 2003–2010. Nine isolates were identified as S . Typhimurium sequence type 313 while the other two were S . Enteritidis. Comprehensive genotypic and phenotypic analyses were performed to compare these isolates to those previously identified in sub-Saharan Africa. We identified a S . Typhimurium isolate referred to as UGA14 that displayed novel plasmid, pseudogene and resistance features as compared to other isolates reported from Africa. Notably, UGA14 is able to ferment both lactose and sucrose due to the acquisition of insertion elements on the pKST313 plasmid. These findings show for the first time the co-evolution of plasmid-mediated lactose and sucrose metabolism along with cephalosporin resistance in NTS further elucidating the evolutionary mechanisms of invasive NTS phenotypes. These results further support the use of combined genomic and phenotypic approaches to detect and characterize atypical NTS isolates in order to advance biosurveillance efforts that inform countermeasures aimed at controlling invasive and antimicrobial resistant NTS.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Mid–height seismic isolation of equipment in nuclear power plants

An innovative seismic isolation solution for designers of safety-class equipment in advanced nuclear power plants is introduced. The test specimen was a tall, slender, carbon steel vessel that could represent a reactor vessel, steam generator, or a heat exchanger in a nuclear power plant: 240 inches tall, outer diameter of 60 inches, and wall thickness of 1 inch. The vessel was supported by three radial mounts at its mid-height, near its center of gravity, on a steel frame. The vessel was subjected to three-component ground motions using a 6DOF earthquake simulator. The specimen was filled with water for testing to indirectly account for the fluid and internal equipment present inside a prototype vessel. Three configurations were tested: non-isolated, isolated using single Friction Pendulum (SFP) bearings, and isolated using triple Friction Pendulum (TFP) bearings. The test results demonstrate that mid-height seismic isolation is practical and enables a significant reduction in horizontal spectral accelerations. Furthermore, these outcomes are not specific to the spherical sliding bearings used in the experiments but are broadly applicable to mid-height, seismically isolated equipment.

42 ENGINEERING↗

DOE OSTI2022

Advanced Distributed Wind Turbine Controls Series: Part 2-Wind Energy in Isolated Grids – Microgrids, Infrastructure Resilience, and Advanced Controls Launchpad (MIRACL)

In an isolated grid, wind turbines are typically deployed to provide energy to maximize energy production, reduce diesel-fuel consumption, reduce carbon emissions, and reduce costs for energy and fuel transportation. However, in addition to solely providing energy to the power system, wind turbines contain rotating masses and inverter-based controls that can enable various reliability and resilience services through advance controls. As part of the Microgrids, Infrastructure Resilience, and Advanced Controls Launchpad (MIRACL) this paper demonstrates, through desktop simulations, advanced wind turbine controls that can be employed to support higher contributions of wind in isolated grids, and to demonstrate ways that wind can play a role in supporting stability of an isolated grid. This isolated grid used in these desktop simulations is comprised of a wind turbine (600 kW), solar PV (430 kW), battery energy storage system (1 MW/1MWh), a simulated diesel generator (2 MW) and various types of loads (critical, dynamic). We developed a model of the subsystems in MATLAB/Simulink and validated them with available data from real-world components on NREL's Flatirons Campus. These validated models are then configured for various case studies. We compare the output of the desktop simulation with a baseline case with the diesel generator. Active and reactive power control of the wind turbine can help improve frequency and voltage responses in the isolated grid, respectively. By utilizing a small integrated battery energy storage system in the DC-link of the wind turbine, we also demonstrate that wind turbines can help blackstart a critical load comparable to its rated power and support other renewables (e.g. solar PV) come online and pick up an additional load. This report illustrates some of these reliability and resilience services a wind turbine can provide in an isolated grid.

17 WIND ENERGY↗

DOE OSTI2021

Substrate, temperature, and geographical patterns among nearly 2000 natural yeast isolates

Yeasts have broad importance as industrially and clinically relevant microbes and as powerful models for fundamental research, but we are only beginning to understand the roles yeasts play in natural ecosystems. Yeast ecology is often more difficult to study compared to other, more abundant microbes, but growing collections of natural yeast isolates are beginning to shed light on fundamental ecological questions. In this work, we used environmental sampling and isolation to assemble a dataset of 1962 isolates collected from throughout the contiguous United States of America (USA) and Alaska, which were then used to uncover geographic patterns, along with substrate and temperature associations among yeast taxa. We found some taxa, including the common yeasts Torulaspora delbrueckii and Saccharomyces paradoxus, to be repeatedly isolated from multiple sampled regions of the USA, and we classify these as broadly distributed cosmopolitan yeasts. A number of yeast taxon-substrate associations were identified, some of which were novel and some of which support previously reported associations. Further, we found a strong effect of isolation temperature on the phyla of yeasts recovered, as well as for many species. We speculate that substrate and isolation temperature associations reflect the ecological diversity of and niche partitioning by yeast taxa.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Non-linear Wire Rope Isolator Model to Enhance Transportation Simulation of Fragile Equipment

Abstract Introduction Wire rope isolators are often used as means of vibration isolation for the transportation of fragile machine equipment. When deployed as suspension systems in a transportation scenario, a simple spring–damper model is often used to predict the dynamic loads that act on the structure being transported. However, this simple model has proved to be too simplistic to be used in the development of an accurate numerical model that can predict the vibration levels experienced by the inner components of fragile equipment during its transportation. This paper describes the experimental tests conducted on a wire rope isolator used for the transportation of the prototype SSR1 cryomodule. Materials and methods A hysteretic Bouc–Wen model has been used to analytically describe the force–deformation relationship of the wire rope isolators. The developed model of the isolator has been implemented in a larger model to simulate the actual transportation of the prototype SSR1 cryomodule, a section of the new PIP-II linear accelerator under construction at Fermilab. A series of multibody dynamic simulations with rigid and flexible components was used to numerically determine the acceleration of some critical components. Results and conclusions An actual experimental transportation was simulated using two numerical models: the developed Bouc–Wen model and a conventional spring–damper model. It is shown how the Bouc–Wen formulation of the isolator characteristics drastically improves the correspondence between experimental and simulated results if compared to a spring–damper model, especially in the range of 0–30 Hz which is the most critical for transportation problems.

42 ENGINEERING↗

DOE OSTI2022

Electric-field control of the nucleation and motion of isolated three-fold polar vertices

Recently various topological polar structures have been discovered in oxide thin films. Despite the increasing evidence of their switchability under electrical and/or mechanical fields, the dynamic property of isolated ones, which is usually required for applications such as data storage, is still absent. Here, we show the controlled nucleation and motion of isolated three-fold vertices under an applied electric field. At the PbTiO 3 /SrRuO 3 interface, a two-unit-cell thick SrTiO 3 layer provides electrical boundary conditions for the formation of three-fold vertices. Utilizing the SrTiO 3 layer and in situ electrical testing system, we find that isolated three-fold vertices can move in a controllable and reversible manner with a velocity up to ~629 nm s -1 . Microstructural evolution of the nucleation and propagation of isolated three-fold vertices is further revealed by phase-field simulations. This work demonstrates the ability to electrically manipulate isolated three-fold vertices, shedding light on the dynamic property of isolated topological polar structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Revealing oxidative pentose metabolism in new Pseudomonas putida isolates

Abstract The Pseudomonas putida group in the Gammaproteobacteria has been intensively studied for bioremediation and plant growth promotion. Members of this group have recently emerged as promising hosts to convert intermediates derived from plant biomass to biofuels and biochemicals. However, most strains of P. putida cannot metabolize pentose sugars derived from hemicellulose. Here, we describe three isolates that provide a broader view of the pentose sugar catabolism in the P. putida group. One of these isolates clusters with the well‐characterized P. alloputida KT2440 (Strain BP6); the second isolate clustered with plant growth‐promoting strain P. putida W619 (Strain M2), while the third isolate represents a new species in the group (Strain BP8). Each of these isolates possessed homologous genes for oxidative xylose catabolism ( xylDXA ) and a potential xylonate transporter. Strain M2 grew on arabinose and had genes for oxidative arabinose catabolism ( araDXA ). A CRISPR interference (CRISPRi) system was developed for strain M2 and identified conditionally essential genes for xylose growth. A glucose dehydrogenase was found to be responsible for initial oxidation of xylose and arabinose in strain M2. These isolates have illuminated inherent diversity in pentose catabolism in the P. putida group and may provide alternative hosts for biomass conversion.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Genomic analysis and identification of a novel superantigen, SargEY, in Staphylococcus argenteus isolated from atopic dermatitis lesions

During surveillance of Staphylococcus aureus in lesions from patients with atopic dermatitis (AD), we isolated Staphylococcus argenteus, a species registered in 2011 as a new member of the genus Staphylococcus and previously considered a lineage of S. aureus. Genome sequence comparisons between S. argenteus isolates and representative S. aureus clinical isolates from various origins revealed that the S. argenteus genome from AD patients closely resembles that of S. aureus causing skin infections. We previously reported that 17%–22% of S. aureus isolated from skin infections produce staphylococcal enterotoxin Y (SEY), which predominantly induces T-cell proliferation via the T-cell receptor (TCR) Vα pathway. Complete genome sequencing of S. argenteus isolates revealed a gene encoding a protein similar to superantigen SEY, designated as SargEY, on its chromosome. Population structure analysis of S. argenteus revealed that these isolates are ST2250 lineage, which was the only lineage positive for the SEY-like gene among S. argenteus. Recombinant SargEY demonstrated immunological cross-reactivity with anti-SEY serum. SargEY could induce proliferation of human CD4 + and CD8 + T cells, as well as production of TNF-α and IFN-γ. SargEY showed emetic activity in a marmoset monkey model. S arg EY and SET (a phylogenetically close but uncharacterized SE) revealed their dependency on TCR Vα in inducing human T-cell proliferation. Additionally, TCR sequencing revealed other previously undescribed Vα repertoires induced by SEH. S arg EY and SEY may play roles in exacerbating the respective toxin-producing strains in AD.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Genomic and Phenotypic Characterization of Chloracidobacterium Isolates Provides Evidence for Multiple Species

Chloracidobacterium is the first and until now the sole genus in the phylum Acidobacteriota (formerly Acidobacteria ) whose members perform chlorophyll-dependent phototrophy (i.e., chlorophototrophy). An axenic isolate of Chloracidobacterium thermophilum (strain B T ) was previously obtained by using the inferred genome sequence from an enrichment culture and diel metatranscriptomic profiling analyses in situ to direct adjustments to the growth medium and incubation conditions, and thereby a defined growth medium for Chloracidobacterium thermophilum was developed. These advances allowed eight additional strains of Chloracidobacterium spp. to be isolated from microbial mat samples collected from Mushroom Spring, Yellowstone National Park, United States, at temperatures of 41, 52, and 60°C; an axenic strain was also isolated from Rupite hot spring in Bulgaria. All isolates are obligately photoheterotrophic, microaerophilic, non-motile, thermophilic, rod-shaped bacteria. Chloracidobacterium spp. synthesize multiple types of (bacterio-)chlorophylls and have type-1 reaction centers like those of green sulfur bacteria. Light harvesting is accomplished by the bacteriochlorophyll a -binding, Fenna-Matthews-Olson protein and chlorosomes containing bacteriochlorophyll c . Their genomes are approximately 3.7 Mbp in size and comprise two circular chromosomes with sizes of approximately 2.7 Mbp and 1.0 Mbp. Comparative genomic studies and phenotypic properties indicate that the nine isolates represent three species within the genus Chloracidobacterium . In addition to C. thermophilum , the microbial mats at Mushroom Spring contain a second species, tentatively named Chloracidobacterium aggregatum , which grows as aggregates in liquid cultures. The Bulgarian isolate, tentatively named Chloracidobacterium validum , will be proposed as the type species of the genus, Chloracidobacterium. Additionally, Chloracidobacterium will be proposed as the type genus of a new family, Chloracidobacteriaceae , within the order Blastocatellales , the class Blastocatellia , and the phylum Acidobacteriota.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Isolation coupler for a structural assembly and method for attenuating a load

An isolation coupler for coupling a functional element to a support structure includes a first bracket. The first bracket includes a number of first-bracket sides. The number of first-bracket sides forms a closed polygonal shape, in plan view. The isolation coupler further includes a number of isolators coupled to each one of the first-bracket sides. The isolation coupler also includes a second bracket. The second bracket includes a number of second-bracket sides. The second bracket sides are coupled to the isolators. The number of second-bracket sides is equal to the number of first-bracket sides and forms the closed polygonal shape, in plan view. The isolators separate each one of the first-bracket sides from a corresponding one of the second-bracket sides to attenuate a load transferred from the first bracket to the second bracket.

Aston, Richard W.↗

DOE OSTI2023

Isolation coupler for a structural assembly and method for attenuating a load

Aston, Richard W.↗

DOE OSTI2023

Inclusive-photon production and its dependence on photon isolation in $pp$ collisions at $\sqrt{s}$ = 13 TeV using 139 fb -1 of ATLAS data

Measurements of differential cross sections are presented for inclusive isolated-photon production in $pp$ collisions at a centre-of-mass energy of 13 TeV provided by the LHC and using 139 -1 fb of data recorded by the ATLAS experiment. The cross sections are measured as functions of the photon transverse energy in different regions of photon pseudorapidity. The photons are required to be isolated by means of a fixed-cone method with two different cone radii. The dependence of the inclusive-photon production on the photon isolation is investigated by measuring the fiducial cross sections as functions of the isolation-cone radius and the ratios of the differential cross sections with different radii in different regions of photon pseudorapidity. The results presented in this paper constitute an improvement with respect to those published by ATLAS earlier: the measurements are provided for different isolation radii and with a more granular segmentation in photon pseudorapidity that can be exploited in improving the determination of the proton parton distribution functions. These improvements provide a more in-depth test of the theoretical predictions. Next-to-leading-order QCD predictions from JETPHOX and SHERPA and next-to-next-to-leading-order QCD predictions from NNLOJET are compared to the measurements, using several parameterisations of the proton parton distribution functions. The measured cross sections are well described by the fixed-order QCD predictions within the experimental and theoretical uncertainties in most of the investigated phase-space region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Biofilm formation and genomic features of Listeria monocytogenes strains isolated from meat and dairy industries located in Piedmont (Italy)

Listeria monocytogenes is considered a major challenge for the food industry as it can persist for long periods in food processing plants by forming biofilms. The aims of this study were: i) to assess the biofilm producing ability of 57 Listeria monocytogenes isolates previously subjected to whole-genome sequencing (WGS); ii) to compare the levels of biofilm formation with the presence or absence of biofilm associated genes. To determine the presence or absence of a known set of biofilm associated genes, a comparative genomic analysis was performed on each strain. Among Listeria monocytogenes isolates, 58 %, 38.5 % and 3.5 % exhibited weak, moderate or strong biofilm production, respectively. No difference in biofilm production was observed between food and environmental isolates. The percentage of Listeria monocytogenes strains isolated from meat products (57 %) classified as moderate or strong biofilm producers was higher than the percentage obtained for strains isolated from dairy products (28 %). Here, the presence of the Stress Survival Islet 1, the arsD stress gene and the truncated inlA protein was significantly associated with increased levels of biofilm. Combining biofilm phenotype with molecular and genotyping data may provide the opportunity to better understand the relationship between genes linked to biofilm formation in Listeria monocytogenes.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Bioconversion and quantification of humic substances from low rank coals using indigenous fungal isolates

The major portion of coals around the world belongs to lignitic origin, and burning of these Low Rank Coals (LRCs) not only produces energy, but also release harmful gases into the environment. On the other hand, coal is a mega source of fossilized carbon compounds that can be utilized in diverse range of carbon/organic industries. Biosolubilization is one of the safest and economical way to consume these LRCs for the harvest of humic and fulvic acids for industrial applications. Present studies deal with solubilization of coal samples from five different mines of Punjab, Pakistan by indigenously isolated fungus. From a number of indigenously isolated fungal isolates, an isolate NF-2 was selected based on its solubilization potential on solid Sabouraud medium. The intensity of coal biosolubilization was found maximum for coal sample B-1 (59%) and lowest for sample B-26 (17.2%) with 5% (w/v) pulp density at 28 ± 2°C. Humification index value (A 4 /A 6 ) for biosolubilized products of coal sample B-1 was found 6.18 which was much higher than the A 4 /A 6 value (4.27) of commercially available standard humic acid. Biosolubilized products from coal sample B-1 was found maximum with 8681 mg/L humic acid concentration as determined by standard curve method. FTIR and FE-SEM analyses of sample B-1 treated with NF-2 confirmed the structural break down and solubilization of coal. Molecular identification of fungal isolate NF-2 showed 100% similarity to Aspergillus flavus. Here, this work paves the way to utilize lignitic coals for the environment friendly and low-cost production of humic acids by fungal biosolubilization as an alternate to chemical methods.

59 BASIC BIOLOGICAL SCIENCES↗