Search NASA⌕ Search

SEARCH · Search NASA

Results for “kinetic distributions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Wall Shear Stress, Wall Pressure and Near Wall Velocity Field Relationships in a Whirling Annular Seal

The mean and phase averaged pressure and wall shear stress distributions were measured on the stator wall of a 50% eccentric annular seal which was whirling in a circular orbit at the same speed as the shaft rotation. The shear stresses were measured using flush mounted hot-film probes. Four different operating conditions were considered consisting of Reynolds numbers of 12,000 and 24,000 and Taylor numbers of 3,300 and 6,600. At each of the operating conditions the axial distribution (from Z/L = -0.2 to 1.2) of the mean pressure, shear stress magnitude, and shear stress direction on the stator wall were measured. Also measured were the phase averaged pressure and shear stress. These data were combined to calculate the force distributions along the seal length. Integration of the force distributions result in the net forces and moments generated by the pressure and shear stresses. The flow field inside the seal operating at a Reynolds number of 24,000 and a Taylor number of 6,600 has been measured using a 3-D laser Doppler anemometer system. Phase averaged wall pressure and wall shear stress are presented along with phase averaged mean velocity and turbulence kinetic energy distributions located 0.16c from the stator wall where c is the seal clearance. The relationships between the velocity, turbulence, wall pressure and wall shear stress are very complex and do not follow simple bulk flow predictions.

Morrison, Gerald L.↗
NASA NTRS1972

Ion heating mechanism in a modified Penning discharge

Ions with Maxwellian energy distributions and kinetic temperatures ranging from 20 eV to 7 keV have been observed in a modified Penning discharge operating in the steady state. Investigation of the plasma revealed two distinct spoke-like concentrations of charge rotating with different velocities in the sheath between the plasma and the anode ring. The faster spoke consists of electrons rotating with the E/B drift velocity, where E is the electric field and B is the magnetic field strength. The slow spoke consists of ions, the thermal velocity of which is observed to be proportional to the spoke velocity. The experimental data are consistent with a model whereby the ion drift velocity in this spoke, corresponding to kilovolt ion energies, is Maxwellianized by strong electrostatic turbulence in the sheath. Theoretical expressions are derived for the frequency of the electron and ion spoke rotation, for the ion kinetic temperature, and for the ion heating efficiency as functions of the discharge parameters. These expressions are shown to be consistent with extensive experimental data.

Roth, J. R.↗
NASA NTRS1971

Origin of hot ions observed in a modified Penning discharge.

Ions with a Maxwellian energy distribution and kinetic temperatures ranging from below 100 eV to several keV have been observed in a steady-state modified Penning discharge. Observations in the plasma, with capacitive probes at several azimuthal locations, are consistent with the existence of two distinct spokes rotating with different velocities in the sheath between the plasma and the anode ring. The faster (0.5-10 MHz) spoke consists of electrons rotating with the E/B drift velocity. The slow (0.1-1.0 MHz) spoke consists of ions, the measured thermal velocity of which is directly proportional to the spoke velocity. The interaction of the two spokes is apparently responsible for the observed electrostatic ?turbulence' and ion thermalization. The anode sheath thickness is smaller than the ion gyrodiameter in this plasma. Thus the ions are in the electric field of the sheath for only a fraction of their orbit, and their E/B drift (spoke) velocity is smaller than that of the electrons.

Roth, J. R.↗
NASA NTRS1973

Origin of hot ions observed in a modified Penning discharge.

Ions with a Maxwellian energy distribution and kinetic temperatures ranging from below 100 eV to several keV have been observed in a steady-state modified Penning discharge. Observations in the plasma, with capacitive probes at several azimuthal locations, are consistent with the existence of two distinct spokes rotating with different velocities in the sheath between the plasma and the anode ring. The faster (0.3-10 MHz) spoke consists of electrons rotating with the E/B drift velocity. The slow (0.06-0.8 MHz) spoke consists of ions, the measured thermal velocity of which is directly proportional to the spoke velocity. The interaction of the two spokes is apparently responsible for the observed electrostatic turbulence and ion thermalization.

Roth, J. R.↗
NASA NTRS1976

Comparison of modal test results - Multipoint sine versus single-point random

The Mariner Jupiter/Saturn (MJS) spacecraft was subjected to the traditional multipoint sine dwell (MPSD) modal test using 111 accelerometer channels, and also to single-point random (SPR) testing using 26 accelerometer channels, and the two methods are compared according to cost, schedule, and technical criteria. A measure of comparison between the systems was devised in terms of the cumulative difference in the kinetic energy distribution of the common accelerometers. The SPR and MPSD method show acceptable agreement with respect to frequencies and mode damping. The merit of the SPR method is that the excitation points are minimized and the test article can be committed to other uses while data analysis is performed. The MPSD approach allows validity of the data to be determined as the test progresses. Costs are about the same for the two methods.

Leppert, E. L.↗
NASA NTRS1979

Matrix perturbation for analytical model improvement

A matrix perturbation method is proposed to calculate the Jacobian matrix and to compute the new eigendata for the parameter estimation procedure. The advantages of the method are the applicability to large complex structures without knowing the analytical expressions for the mass and stiffness matrices, and a cost effective approach for the re-computation of the eigendata. This method also allows the use of other measurements such as modal forces, kinetic energy distribution, and strain energy distributions in the estimation procedure. A realistic sample problem is presented to demonstrate the effectiveness of the proposed method.

Chen, J. C.↗
NASA NTRS1982

The probability distributions of S/+/ gyrospeeds in the Io torus

The first detailed thermal speed probability distribution for a Jovian plasma ion is presented. The distribution of heavy ion thermal speeds appears to be highly significant for an evaluation of the processes by which the particle and energy budgets of the Io plasma torus are maintained. Attention is given to the measurement, reduction, and analysis procedures which yield the reported probability distribution. A kinetic energy inventory of the Jovian plasma heavy ion component can be obtained from high-resolution, high-precision spectrophotometry of emission lines. The current S(+) study finds that detection of the line wings results in a mean energy (approximately 60 eV) which is higher by a factor of approximately 10 than is implied by the line core. This illustrates that a dispersive measurement may provide only a lower limit to the kinetic energy content.

Brown, R. A.↗
NASA NTRS1984

Spacecraft structural system identification by modal test

A structural parameter estimation procedure using the measured natural frequencies and kinetic energy distribution as observers is proposed. The theoretical derivation of the estimation procedure is described and its constraints and limitations are explained. This procedure is applied to a large complex spacecraft structural system to identify the inertia matrix using modal test results. The inertia matrix is chosen after the stiffness matrix has been updated by the static test results.

Chen, J.-C.↗
NASA NTRS1986

Energy broadening due to space-charge oscillations in high current electron beams

During electron beam accelerator operation on Spacelab I, substantial fluxes of electrons were observed with energies greater than the initial beam energy. Numerical calculations are performed for the emission of an unneutralized, one-dimensional electron beam. These calculations show clearly that space charge oscillations, which are associated with the charge buildup on the emitter, strongly modify the beam and cause the returning beam particles to have a distribution of kinetic energies ranging from half to over twice the initial energy.

Katz, I.↗
NASA NTRS1985

Molecular photoionization processes of astrophysical and aeronomical interest

An account is given of aspects of photoionization processes in molecules, with particular reference to recent theoretical and experimental studies of partial cross sections for production of specific final electronic states and of parent and fragment ions. Such cross sections help provide a basis for specifying the state of excitation of the ionized medium, are useful for estimating the kinetic energy distributions of photoejected electrons and fragment ions, provide parent-and fragment-ion yields, and clarify the possible origins of neutral fragments in highly excited rovibronic states. A descriptive account is given of photoionization phenomena, including tabulation of valence- and inner-shell potentials for some molecules of astrophysical and aeronomical interest. Cross sectional expressions are given. Various approximations currently employed in computational studies are described briefly, threshold laws and high-energy limits are indicated, and distinction is drawn between resonant and direct photoionization phenomena. Recent experimental and theoretical studies of partial photoionization cross sections in selected compounds of astrophysical and aeronomical relevance are described and discussed.

Langhoff, P. W.↗
NASA NTRS1987

Three-dimensional nearfield characterization of a VSTOL jet in turbulent crossflow

This paper documents the measurement and prediction of the near-field evolution of the steady, subsonic, turbulent three-dimensional external aerodynamic flow-field associated with a high speed jet issued from an orifice perpendicular to an imposed crossflow velocity field. A parabolic Navier-Stokes CFD solver is employed, utilizing a Kappa-epsilon closure system with algebraic Reynolds stress equation, in concert with suitably defined porous far-field boundary conditions and a virtual source initial condition procedure. The CFD results correlate well with NASA generated near-field LDA experimental data on mean velocity and rms fluctuation velocity (interpolated to turbulent kinetic energy) distributions. The numerical results in the farther field predict the vortex roll-up and jet deflection/entrainment characterization verified by pitot-static mean velocity experimental data. Detailed results are presented for a circular jet for velocity ratios ranging 4 to 8.

Baker, A. J.↗
NASA NTRS1988

CFD validation experiments for internal flows

Computational Fluid Dynamics (CFD) validation experiments at NASA Lewis Research Center are described. The material presented summarizes the research in three areas: Inlets, Ducts and Nozzles; Turbomachinery; and Chemically Reacting Flows. The specific validation activities are concerned with shock-boundary layer interactions, vortex generator effects, large low speed centrifugal compressor measurements, transonic fan shock structure, rotor/stator kinetic energy distributions, stator wake shedding characteristics, boundary layer transition, multiphase flow and reacting shear layers. These experiments are intended to provide CFD validation data for the internal flow fields within aerospace propulsion system components.

Povinelli, Louis A.↗
NASA NTRS1988

CFD validation experiments for internal flows

Computational Fluid Dynamics (CFD) validation experiments at NASA Lewis are described. The material presented summarized the research in 3 areas: Inlets, ducts and nozzles; Turbomachinery; and Chemically reacting flows. The specific validation activities are concerned with shock boundary layer interactions, vortex generator effects, large low speed centrifugal compressor measurements, transonic fan shock structure, rotor/stator kinetic energy distributions, stator wake shedding characteristics, boundary layer transition, multiphase flow and reacting shear layers. These experiments are intended to provide CFD validation data for the internal flow fields within aerospace propulsion system components.

Povinelli, Louis A.↗