Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear regression analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Noninvasive assessment of left atrial maximum dP/dt by a combination of transmitral and pulmonary venous flow

OBJECTIVES: The study assessed whether hemodynamic parameters of left atrial (LA) systolic function could be estimated noninvasively using Doppler echocardiography. BACKGROUND: Left atrial systolic function is an important aspect of cardiac function. Doppler echocardiography can measure changes in LA volume, but has not been shown to relate to hemodynamic parameters such as the maximal value of the first derivative of the pressure (LA dP/dt(max)). METHODS: Eighteen patients in sinus rhythm were studied immediately before and after open heart surgery using simultaneous LA pressure measurements and intraoperative transesophageal echocardiography. Left atrial pressure was measured with a micromanometer catheter, and LA dP/dt(max) during atrial contraction was obtained. Transmitral and pulmonary venous flow were recorded by pulsed Doppler echocardiography. Peak velocity, and mean acceleration and deceleration, and the time-velocity integral of each flow during atrial contraction was measured. The initial eight patients served as the study group to derive a multilinear regression equation to estimate LA dP/dt(max) from Doppler parameters, and the latter 10 patients served as the test group to validate the equation. A previously validated numeric model was used to confirm these results. RESULTS: In the study group, LA dP/dt(max) showed a linear relation with LA pressure before atrial contraction (r = 0.80, p < 0.005), confirming the presence of the Frank-Starling mechanism in the LA. Among transmitral flow parameters, mean acceleration showed the strongest correlation with LA dP/dt(max) (r = 0.78, p < 0.001). Among pulmonary venous flow parameters, no single parameter was sufficient to estimate LA dP/dt(max) with an r2 > 0.30. By stepwise and multiple linear regression analysis, LA dP/dt(max) was best described as follows: LA dP/dt(max) = 0.1 M-AC +/- 1.8 P-V - 4.1; r = 0.88, p < 0.0001, where M-AC is the mean acceleration of transmitral flow and P-V is the peak velocity of pulmonary venous flow during atrial contraction. This equation was tested in the latter 10 patients of the test group. Predicted and measured LA dP/dt(max) correlated well (r = 0.90, p < 0.0001). Numerical simulation verified that this relationship held across a wide range of atrial elastance, ventricular relaxation and systolic function, with LA dP/dt(max) predicted by the above equation with r = 0.94. CONCLUSIONS: A combination of transmitral and pulmonary venous flow parameters can provide a hemodynamic assessment of LA systolic function.

NASA Discipline Cardiopulmonary↗
DOE OSTI2020

Enantioselective Intramolecular Allylic Substitution via Synergistic Palladium/Chiral Phosphoric Acid Catalysis: Insight into Stereoinduction through Statistical Modeling

The mode of asymmetric induction in an enantioselective intramolecular allylic substitution reaction catalyzed by a combination of palladium and a chiral phosphoric acid was investigated by a combined experimental and statistical modeling approach. Experiments to probe nonlinear effects, the reactivity of deuterium-labeled substrates, and control experiments revealed that nucleophilic attack to the π-allylpalladium intermediate is the enantio-determining step, in which the chiral phosphate anion is involved in stereoinduction. Here, using multivariable linear regression analysis, we determined that multiple noncovalent interactions with the chiral environment of the phosphate anion are integral to enantiocontrol in the transition state. The synthetic protocol to form chiral pyrrolidines was further applied to the asymmetric construction of C-O bonds at fully substituted carbon centers in the synthesis of chiral 2,2-disubstituted benzomorpholines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Population Dynamics and Temporal Trends of Bull Trout in the East Fork Salmon River, Idaho

Abstract Because of their long-term listing under the Endangered Species Act, much interest has been placed on estimating population vital rates for Bull Trout Salvelinus confluentus, but the biotic and abiotic factors that influence the interannual variability in those vital rates have rarely been evaluated. We used mark–recapture data to estimate fish growth, survival, and trends in abundance for fluvial adult Bull Trout in the East Fork Salmon River, Idaho. Over an 8-year period, a total of 1,205 individual Bull Trout were collected at a weir on the East Fork Salmon River (29 km upstream of its confluence with the Salmon River) during June–September, of which 420 were recaptures from prior years. Bull Trout varied in length from 215 to 756 mm and achieved a slightly larger asymptotic length and a slightly lower rate of growth relative to other fluvial and adfluvial Bull Trout populations. Apparent survival averaged 0.42 across all years, which was similar to previous studies estimating apparent survival for Bull Trout. The number of emigrating anadromous salmonid smolts in the upper Salmon River basin positively influenced East Fork Salmon River Bull Trout growth and survival, and survival was higher in years with lower annual discharge. Assessment of population growth via linear regression analysis indicated that the Bull Trout population was increasing during the study period (λ = 1.08; 95% confidence interval = 1.03–1.14). Our findings highlight the ecological link between the abundance of wild and hatchery Chinook Salmon Oncorhynchus tshawytscha, Sockeye Salmon O. nerka, and steelhead O. mykiss smolts and growth and survival of adult Bull Trout in systems where these species occur in sympatry.

Roth, Curtis J.↗
DOE OSTI2024

Monotonic testing of single shear-plane CLT-to-CLT joint with hardwood dowels

Reducing embodied carbon emissions in buildings and striving for carbon neutrality through sustainable design has become a primary goal in the construction industry. The industry is expanding its use of wood-engineered products, such as cross-laminated timber (CLT) to achieve those sustainability goals. Furthermore, replacing steel fasteners with lower embodied carbon alternatives is gaining increased attention in timber engineering. This paper aims to quantify the mechanical behavior of single shear-plane CLT-to-CLT joints using hardwood dowels. The study includes 154 single shear-plane experimental tests with four different CLT species, two hardwood dowel species, and two dowel diameters. Further, the test specimens were subjected to cyclic and monotonic loading until failure, and mechanical properties such as yielding and ultimate strength, serviceability and yielding stiffness, and ductility were quantified. The hardwood dowel CLT-to-CLT joints demonstrated high strength with up to 10.3 kN (2.3 kips) capacity per dowel and lateral stiffness of up to 5.2 kN/mm (30.8 k/in) per dowel. This strength and stiffness are roughly equivalent to or exceed values for mass timber wood screws, making hardwood dowels a good alternative. In addition, the observed mean ductility of joints ranged from 2.4 to 4.5. Finally, analytical equations for the joints' yielding strength, lateral serviceability stiffness, and yielding stiffness were derived with non-linear regression analysis and validated using the experimental test results.

42 ENGINEERING↗
DOE OSTI2020

Relationship between ductility and the porosity of additively manufactured AlSi10Mg

Additive manufacturing via selective laser melting can result in variable levels of internal porosity both between build plates and within components from the same build. In this work, sample porosity levels were compared to tensile properties for 176 samples spanning eight different build plates. Sample porosity was measured both by Archimedes density, which provided an estimation of overall porosity, and by observation of voids in the fracture surface, which provided an estimation of the porosity at the failure plane. The porosity observed at the fracture surface consistently demonstrated higher porosity than that suggested by Archimedes density. The porosity values obtained from both methods were compared against the mechanical results. Sample porosity appears to have some correlation to the ultimate tensile strength, yield strength, and modulus, but the strongest relationship is observed between porosity and ductility. Three different models were used to relate the fracture surface porosity to the ductility. The first method was a simple linear regression analysis, while the other two models have been used to relate porosity to ductility in cast alloys. It is shown that all three models fit the data well over the observed porosity ranges, suggesting that the models taken from casting theory can extend to additively manufactured metals. Finally, it is proposed that the non-destructive Archimedes method could be used to estimate an approximate sample ductility through the use of correlations realized here. Such a relationship could prove useful for design and for a deeper understanding of the impact of pores on tensile behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Near-infrared chemical abundances of stars in the Sculptor dwarf galaxy

Owing to the recent identification of major substructures in our Milky Way (MW), the astronomical community has started to reevaluate the importance of dissolved and existing dwarf galaxies. In this work, we investigate up to 13 elements in 43 giant stars of the Sculptor dwarf galaxy (Scl) using high-signal-to-noise-ratio near-infrared (NIR) APOGEE spectra. Thanks to the strong feature lines in the NIR, we were able to determine high-resolution O, Si, and Al abundances for a large group of sample stars for the first time in Scl. By comparing the [α/Fe] (i.e., O, Mg, Si, Ca, and Ti) of the stars in Scl, Sagittarius, and the MW, we confirm the general trend that less massive galaxies tend to show lower [α/Fe]. The low [Al/Fe] (~ - 0.5) in Scl demonstrates the value of this ratio as a discriminator with which to identify stars born in dwarf galaxies (from MW field stars). A chemical-evolution model suggests that Scl has a top-light initial mass function (IMF), with a high-mass IMF power index of ~ - 2.7, and a minimum Type Ia supernovae delay time of ~100 Myr. Furthermore, a linear regression analysis indicates a negative radial metallicity gradient and positive radial gradients for [Mg/Fe] and [Ca/Fe], in qualitative agreement with the outside-in formation scenario.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Mining experimental magnetized liner inertial fusion data: Trends in stagnation morphology

In magnetized liner inertial fusion (MagLIF), a cylindrical liner filled with fusion fuel is imploded with the goal of producing a one-dimensional plasma column at thermonuclear conditions. However, structures attributed to three-dimensional effects are observed in self-emission x-ray images. Despite this, the impact of many experimental inputs on the column morphology has not been characterized. We demonstrate the use of a linear regression analysis to explore correlations between morphology and a wide variety of experimental inputs across 57 MagLIF experiments. Results indicate the possibility of several unexplored effects. For example, we demonstrate that increasing the initial magnetic field correlates with improved stability. Although intuitively expected, this has never been quantitatively assessed in integrated MagLIF experiments. We also demonstrate that azimuthal drive asymmetries resulting from the geometry of the “current return can” appear to measurably impact the morphology. In conjunction with several counterintuitive null results, we expect the observed correlations will encourage further experimental, theoretical, and simulation-based studies. Finally, we note that the method used in this work is general and may be applied to explore not only correlations between input conditions and morphology but also with other experimentally measured quantities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Association of optical, ultraviolet, and soft X-ray excess emissions in AGNs

Soft X-ray emission (0.5–2.0 keV) plays a pivotal role in regulating the optical and ultraviolet (UV) emission in the active galactic nuclei (AGNs). We collected a sample of 1811 AGNs from the SDSS database and obtained various parameters of Balmer lines, optical continuum, Mg ii line & UV continuum and studied their dependencies on soft X-ray luminosity. Based on the linear regression analysis, we found that FWHM$_{\rm {Mg\,\,\small {II}}}$ ∝ FWHM$_{\text{H}\beta }^{0.554}$ suggesting that UV emission is arising from a region relatively outside the broad-line region (BLR) associated to the Hβ emission and found a strong correlation between optical and UV luminosities (L$_{\rm {Mg\,\,\small {II}}}$ ∝ $L_{\rm {H}\beta }^{0.822}$). It was noticed that the dependency of optical continuum luminosities on soft excess changes with the redshift (L X ∝ L$^{0.596}_{5100\, \mathring{\rm A}}$ for z < 0.5 and L X ∝ L$^{0.429}_{5100\, \mathring{\rm A}}$ for z > 0.5). The full width at half-maximum components of Hβ and Mg II core components were found to be virialized and is not affected by the soft excess emission whereas the wings of Mg II display a dependency. We estimated a relation viz. L X ∝L$^{0.520}_{3000\, \mathring{\rm A}}$ FWHM$^{0.525}_{\rm {Mg\,\,\small {II}}}$ and found to be well in agreement with a proposed physical scenario. All the derived relations were used to understand the intermodulating association of the BLR and disc in the AGNs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Tuning the magnetic properties of the CrMnFeCoNi Cantor alloy

Magnetic properties of more than 20 Cantor alloy samples of varying composition were investigated over a temperature range of 5 K to 300 K and in fields of up to 70 kOe using magnetometry and muon spin relaxation. Two transitions are identified: a spin-glass-like transition that appears between 55K and 190K, depending on composition, and a ferrimagnetic transition that occurs at approximately 43K in multiple samples with widely varying compositions. The magnetic signatures at 43K are remarkably insensitive to chemical composition. A modified Curie-Weiss model was used to fit the susceptibility data and to extract the net effective magnetic moment for each sample. The resulting values for the net effective moment were either diminished with increasing Cr or Mn concentrations or enhanced with decreasing Fe, Co, or Ni concentrations. Beyond a sufficiently large effective moment, the magnetic ground state transitions from ferrimagnetism to ferromagnetism. The effective magnetic moments, together with the corresponding compositions, are used in a global linear regression analysis to extract element-specific effective magnetic moments, which are compared to the values obtained by ab initio based density functional theory calculations. Finally, these moments provide the information necessary to controllably tune the magnetic properties of Cantor alloy variants.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermophysical modeling of raw glaze liquidus temperature and viscosity

Raw glazes, which do not contain pre-melted glass frits, are widely used due to their low cost. The natural variability of the mineral compositions used in raw glazes affects their viscosity during firing. Molten glaze viscosity plays an important role in determining the final surface quality; therefore, it is important to determine how raw glaze composition and firing conditions affect viscosity. Thermophysical modeling provides a way to evaluate the liquidus temperature and viscosity of molten glazes as a function of composition and oxygen activity. Equilibrium phase volume fraction and composition of 242 raw glaze recipes were evaluated under oxidizing and reducing conditions. Undissolved or precipitation of solid phases explain the secondary flux transition from anti-fluxing to fluxing near the liquidus temperature. The liquidus temperature and viscosity of iron glazes decrease as a function of increasing iron content under a reducing atmosphere. The empirical probability distribution of molten glaze viscosity follows a lognormal distribution, with lead glazes having significantly lower viscosity compared with glazes without lead. Here, the peak firing temperature viscosity of lead-free glazes is near the working point of glass. Multiple linear regression analysis shows that the peak firing temperature viscosity and liquidus temperature significantly predict the viscosity factor.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Two-Day Westward-Propagating Inertio-Gravity Waves during GoAmazon

The dynamical and thermodynamical features of Amazonian 2-day westward-propagating inertia–gravity (WIG) waves are examined. On the basis of a linear regression analysis of satellite brightness temperature and data from the 2014–15 Observations and Modeling of the Green Ocean Amazon (GoAmazon) field campaign, it is shown that Amazonian WIG waves exhibit structure and propagation characteristics consistent with the n = 1 WIG waves from shallow water theory. These WIG waves exhibit a pronounced seasonality, with peak activity occurring from March to May and a minimum occurring from June to September. Evidence is shown that mesoscale convective systems over the Amazon are frequently organized in 2-day WIG waves. Results suggest that many of the Amazonian WIG waves come from preexisting 2-day waves over the Atlantic, which slow down when coupled with the deeper, more intense convection over tropical South America. In contrast to WIG waves that occur over the ocean, Amazonian 2-day WIG waves exhibit a pronounced signature in surface temperature, moisture, and heat fluxes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Modeling dynamics of acute HIV infection incorporating density-dependent cell death and multiplicity of infection

Understanding the dynamics of acute HIV infection can offer valuable insights into the early stages of viral behavior, potentially helping uncover various aspects of HIV pathogenesis. The standard viral dynamics model explains HIV viral dynamics during acute infection reasonably well. However, the model makes simplifying assumptions, neglecting some aspects of HIV infection. For instance, in the standard model, target cells are infected by a single HIV virion. Yet, cellular multiplicity of infection (MOI) may have considerable effects in pathogenesis and viral evolution. Further, when using the standard model, we take constant infected cell death rates, simplifying the dynamic immune responses. Here, we use four models—1) the standard viral dynamics model, 2) an alternate model incorporating cellular MOI, 3) a model assuming density-dependent death rate of infected cells and 4) a model combining (2) and (3)—to investigate acute infection dynamics in 43 people living with HIV very early after HIV exposure. We find that all models qualitatively describe the data, but none of the tested models is by itself the best to capture different kinds of heterogeneity. Instead, different models describe differing features of the dynamics more accurately. For example, while the standard viral dynamics model may be the most parsimonious across study participants by the corrected Akaike Information Criterion (AICc), we find that viral peaks are better explained by a model allowing for cellular MOI, using a linear regression analysis as analyzed by R 2 . These results suggest that heterogeneity in within-host viral dynamics cannot be captured by a single model. Depending on the specific aspect of interest, a corresponding model should be employed.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

EBSD seed LDRD project: Does Corona Virus – 2019 (COVID-19) and Seasonal Flu have similar meteorology and air quality controls driving their spread?

Seasonal influenza and Influenza like Illnesses (ILI) pose a serious public health risk and in turn affect the economy. Various factors affect ILI cases and mortality, including the pathogen and its interaction with the host, as well as environmental and socioeconomic factors such as meteorology, household structure, air pollution, urbanization, and population. Despite the growing number of studies on influenza and ILI, challenges remain in forecasting the timing of seasonal onset, outbreak patterns, and key factors affecting transmission. In particular, the impacts of meteorology and air quality on ILI have been challenging to understand, with linear regression studies focused on different geographic regions producing contradictory results. For example, influenza seasonality has been associated with cold-dry conditions in temperate mid-latitudes, but with humid-rainy conditions in tropical climates. These apparently contradictory results imply that the relationships between influenza cases and atmospheric variables may be too complex to be captured by linear regression models. In this seed project, we analyze meteorology and air quality variables from numerical models to determine which atmospheric variables are most helpful in predicting weekly changes in recorded flu cases. In contrast to most previous studies that relied on linear regression analysis to predict the timing of the flu onset or peak, we employ a robust machine learning algorithm to evaluate the contribution of atmospheric variables to weekly changes in recorded ILI cases. These results may also be relevant to the spread of other respiratory illnesses such as Corona Virus Disease – 2019 (COVID-19).

60 APPLIED LIFE SCIENCES↗
NASA NTRS1972

Spacecraft platform cost estimating relationships

The three main cost areas of unmanned satellite development are discussed. The areas are identified as: (1) the spacecraft platform (SCP), (2) the payload or experiments, and (3) the postlaunch ground equipment and operations. The SCP normally accounts for over half of the total project cost and accurate estimates of SCP costs are required early in project planning as a basis for determining total project budget requirements. The development of single formula SCP cost estimating relationships (CER) from readily available data by statistical linear regression analysis is described. The advantages of single formula CER are presented.

Gruhl, W. M.↗
NASA NTRS1971

Dry-heat Resistance of Bacillus Subtilis Var. Niger Spores on Mated Surfaces

Bacillus subtilis var. niger spores were placed on the surfaces of test coupons manufactured from typical spacecraft materials including stainless steel, magnesium, titanium, and aluminum. These coupons were then juxtaposed at the inoculated surfaces and subjected to test pressures of 0, 1000, 5000, and 10,000 psi. Tests were conducted in ambient, nitrogen, and helium atmospheres. While under the test pressure condition, the spores were exposed to 125 C for intervals of 5, 10, 20, 50, or 80 min. Survivor data were subjected to a linear regression analysis that calculated decimal reduction times.

Simko, G. J.↗
NASA NTRS1972

A prediction model for lift-fan simulator performance

The performance characteristics of a model VTOL lift-fan simulator installed in a two-dimensional wing are presented. The lift-fan simulator consisted of a 15-inch diameter fan driven by a turbine contained in the fan hub. The performance of the lift-fan simulator was measured in two ways: (1) the calculated momentum thrust of the fan and turbine (total thrust loading), and (2) the axial-force measured on a load cell force balance (axial-force loading). Tests were conducted over a wide range of crossflow velocities, corrected tip speeds, and wing angle of attack. A prediction modeling technique was developed to help in analyzing the performance characteristics of lift-fan simulators. A multiple linear regression analysis technique is presented which calculates prediction model equations for the dependent variables.

Yuska, J. A.↗
NASA NTRS1973

An objective technique to estimate percentage of an ERTS-1 water boundary resolution element covered by water

The author has identified the following significant results. An objective technique was developed to measure the surface area of water bodies. Nineteen water bodies in the Houston and Galveston, Texas area were selected as a basis for the technique development. The actual surface area of each body was determined from rectified and enlarged NASA aircraft photography. A clustering algorithm was used to produce classification maps of the region from ERTS-1 data. Certain classes were identified as being 100% water. Other classes were identified as being mixtures of water with land or vegetation. The number of picture elements falling on each water body and its boundary were counted. A linear regression analysis was performed to relate the total number of picture elements and boundary elements counted to the actual surface area. The standard error of the estimate was 6.7 acres. The absolute error was not a function of the actual surface area of the water body.

Erb, R. B.↗